Priyanka Sharma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Priyanka Sharma has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
Vaibhav Neema
Department of Electronics and Telecommunication, Institute of Engineering and Technology, Devi Ahilya Vishwavidyalaya, Indore, Madhya Pradesh, India
5 shared publications- Nitesh Kumar Soni
Department of Electronics Engineering, Medicaps University, Indore, Madhya Pradesh, India
3 shared publications - Shailesh Singh Chouhan
CPS-EISLAB, Luleå University of Technology, 97752 Luleå, Sweden
3 shared publications - Vaibhav Neema
Institute of Engineering and Technology, Devi Ahilya Vishwidyalaya
3 shared publications Rakesh Singhai
Devi Ahilya Vishwavidyalaya, Indore, Madhya Pradesh, India
2 shared publications- Abdolreza Darabi
Shiraz University of Technology (SUTECH)
1 shared publication
Latest Publications
- 28 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (5) , 1697
Corrections to “A Hardware Attack Secure SRAM: A HAS-16T SRAM Cell Resistant to Side Channel Attacks and Fault-Injection Attacks”
This addresses the error in [1]. Table I Column 1 wrong citation: 8T [14]ST-12T [15]LC-7T [16]QUCC-12T [17]RHBD-14T [18]SEUH-12T [19]RH-12T [20]RH-14T [21]EQ-14T [22].
- 28 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (5) , 1697
Corrections to “A Hardware Attack Secure SRAM: A HAS-16T SRAM Cell Resistant to Side Channel Attacks and Fault-Injection Attacks”
This addresses the error in [1]. Table I Column 1 wrong citation: 8T [14]ST-12T [15]LC-7T [16]QUCC-12T [17]RHBD-14T [18]SEUH-12T [19]RH-12T [20]RH-14T [21]EQ-14T [22].
- 9 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (4) , 1331-1342
A Hardware Attack Secure SRAM: A HAS-16T SRAM Cell Resistant to Side Channel Attacks and Fault-Injection Attacks
This article presents the HAS-16T static random access memory (SRAM) cell, a novel 16-transistor design implemented in 45 nm CMOS technology to achieve robust security against side-channel attacks (SCAs) and fault injection attacks (FIAs). The cell integrates sleep transistors, loop-cut mechanisms, prewrite conditioning, and an inverter feedback loop to mitigate leakage power analysis (LPA), timing analysis attacks (TAAs), and FIAs. A comprehensive security measure, based on Monte Carlo simulations (1000 samples, 1 V, $27~^{\circ } $ C), quantifies resistance through histogram overlap and failure probability, yielding a total security matrix (SMTotal) of 98.68%, the highest among evaluated cells (e.g., 6T: 38.37%, EQ-14T: 68.91%). Simulations in the Cadence design environment reveal the HAS-16T’s second-highest static noise margin (SNM), moderate read/write delays, second-lowest write dynamic power, and second-highest leakage power, reflecting a balanced tradeoff for security-critical applications. Compared to conventional and secure SRAM designs, the HAS-16T offers unparalleled protection, making it ideal for cryptographic and embedded systems. Future work includes area optimization and scalability to advanced process nodes.
- 9 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 34 (4) , 1331-1342
A Hardware Attack Secure SRAM: A HAS-16T SRAM Cell Resistant to Side Channel Attacks and Fault-Injection Attacks
This article presents the HAS-16T static random access memory (SRAM) cell, a novel 16-transistor design implemented in 45 nm CMOS technology to achieve robust security against side-channel attacks (SCAs) and fault injection attacks (FIAs). The cell integrates sleep transistors, loop-cut mechanisms, prewrite conditioning, and an inverter feedback loop to mitigate leakage power analysis (LPA), timing analysis attacks (TAAs), and FIAs. A comprehensive security measure, based on Monte Carlo simulations (1000 samples, 1 V, $27~^{\circ } $ C), quantifies resistance through histogram overlap and failure probability, yielding a total security matrix (SMTotal) of 98.68%, the highest among evaluated cells (e.g., 6T: 38.37%, EQ-14T: 68.91%). Simulations in the Cadence design environment reveal the HAS-16T’s second-highest static noise margin (SNM), moderate read/write delays, second-lowest write dynamic power, and second-highest leakage power, reflecting a balanced tradeoff for security-critical applications. Compared to conventional and secure SRAM designs, the HAS-16T offers unparalleled protection, making it ideal for cryptographic and embedded systems. Future work includes area optimization and scalability to advanced process nodes.
- 8 December 2025
- Published by Taylor & Francis in International Journal of Electronics
- Vol. 113 (6) , 1127-1144
Dual feedback radiation-tolerant SRAM for space application
- 8 December 2025
- Published by Taylor & Francis in International Journal of Electronics
- Vol. 113 (6) , 1127-1144
Dual feedback radiation-tolerant SRAM for space application
- Open Access
- 12 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 142304-142317
A Soft Error Self-Resilience Radiation-Hardened 14T SRAM for Aerospace Applications
Various charged particles in space threaten memory circuit integrity and dependability, including photons, alpha particles, and high-energy ions outside the Low Earth Orbit region. These particles particularly affect conventional 6T SRAM by disrupting stored bits, leading researchers to explore radiation-hardened SRAM chips and the addition of extra nodes to memory cells to recover lost data. A novel self resilience radiation-hardened 14T (SRRH-14T) SRAM cell with redundant nodes is presented in this work to solve the soft error problem. The suggested SRRH-14T memory performance compared to well-known radiation-hardened cells, such as 6T-SRAM, Quatro-10T, SEA-14T, RH-14T, QCCS-12T, and RRS-14T. The proposed SRRH-14T memory cell applies to a minimal sensitive node layout area separation to protect against multiple node interruptions. Additionally, the proposed SRRH-14T demonstrates performance enhancements of 1.22x, 1.03x, 1.09x, 1.06x, and 1.02x relative to 6T-SRAM, Quatro-10T, SEA-14T, RH-14T, and RRS-14T, respectively.
- 12 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 142304-142317
Open AccessA Soft Error Self-Resilience Radiation-Hardened 14T SRAM for Aerospace Applications
Various charged particles in space threaten memory circuit integrity and dependability, including photons, alpha particles, and high-energy ions outside the Low Earth Orbit region. These particles particularly affect conventional 6T SRAM by disrupting stored bits, leading researchers to explore radiation-hardened SRAM chips and the addition of extra nodes to memory cells to recover lost data. A novel self resilience radiation-hardened 14T (SRRH-14T) SRAM cell with redundant nodes is presented in this work to solve the soft error problem. The suggested SRRH-14T memory performance compared to well-known radiation-hardened cells, such as 6T-SRAM, Quatro-10T, SEA-14T, RH-14T, QCCS-12T, and RRS-14T. The proposed SRRH-14T memory cell applies to a minimal sensitive node layout area separation to protect against multiple node interruptions. Additionally, the proposed SRRH-14T demonstrates performance enhancements of 1.22x, 1.03x, 1.09x, 1.06x, and 1.02x relative to 6T-SRAM, Quatro-10T, SEA-14T, RH-14T, and RRS-14T, respectively.
- 26 June 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (2) , 025379
High reliable fast write with boosted word line low leakage power and energy efficient 12T SRAM cell
As modern SRAM architectures face increasing demands for high performance and energy efficiency, the proposed 12T SRAM cell offers substantial improvements over conventional designs. This architecture integrates a dynamic word line boosting technique during write operations, significantly enhancing write speed while reducing energy consumption. A data dependent supply voltage scheme further optimizes power efficiency by adjusting the supply voltage based on stored data. To minimize static power and leakage, the design employs several low-power techniques, including high-threshold voltage (HVT) transistors, transistor stacking, and ground gating. A read buffer is incorporated to improve read stability without the overhead of an additional bit line. Simulation results demonstrate that the static power consumption of consider SRAM cells 11T, 10T, 12T_SRL, 12T_ST, 8T, and 6T is 1.27 × , 3.38 × , 1.87 × , 2.96 × , 5.81 × , and 5.67 × higher, respectively, compared to the proposed 12T design. Furthermore, the Write Static Noise Margin (WSNM) of these cells is found to be 1.53 × , 1.57 × , 2.23 × , 2.23 × , 1.96 × , and 1.96 × lower, respectively. Additionally, we proposed 12Tcell with boosted word line. The proposed 12T with boosted word line achieves the highest WSNM and demonstrates the lowest read and write energy consumption compared to all consider cell with least static power dissipation making it highly suitable for low-power, high-reliability memory applications.
- 26 June 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (2) , 025379
High reliable fast write with boosted word line low leakage power and energy efficient 12T SRAM cell
As modern SRAM architectures face increasing demands for high performance and energy efficiency, the proposed 12T SRAM cell offers substantial improvements over conventional designs. This architecture integrates a dynamic word line boosting technique during write operations, significantly enhancing write speed while reducing energy consumption. A data dependent supply voltage scheme further optimizes power efficiency by adjusting the supply voltage based on stored data. To minimize static power and leakage, the design employs several low-power techniques, including high-threshold voltage (HVT) transistors, transistor stacking, and ground gating. A read buffer is incorporated to improve read stability without the overhead of an additional bit line. Simulation results demonstrate that the static power consumption of consider SRAM cells 11T, 10T, 12T_SRL, 12T_ST, 8T, and 6T is 1.27 × , 3.38 × , 1.87 × , 2.96 × , 5.81 × , and 5.67 × higher, respectively, compared to the proposed 12T design. Furthermore, the Write Static Noise Margin (WSNM) of these cells is found to be 1.53 × , 1.57 × , 2.23 × , 2.23 × , 1.96 × , and 1.96 × lower, respectively. Additionally, we proposed 12Tcell with boosted word line. The proposed 12T with boosted word line achieves the highest WSNM and demonstrates the lowest read and write energy consumption compared to all consider cell with least static power dissipation making it highly suitable for low-power, high-reliability memory applications.
- Open Access
- 25 May 2025
- Published by Atlantis Press SARL
- p. 905-913
Performance Analysis of Differential and Single Ended SRAM Cells in Low Power Smart System Applications
- 25 May 2025
- Published by Atlantis Press SARL
- p. 905-913
Open AccessPerformance Analysis of Differential and Single Ended SRAM Cells in Low Power Smart System Applications
- 12 January 2025
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 53 (9) , 5562-5578
Radiation‐Tolerant SRAM for Satellite Image Compression Systems: A Hybrid Memory Array Approach
This work is based on the design of an SRAM memory array for on board satellite image compression systems, including memory size, cost, power efficiency, and vulnerability to single event upsets (SEU). Initially, we designed a memory cell, RH_14T, specifically to mitigate the impact of SEUs. Subsequently, we incorporated RH_14T into the on‐board memory array in two variations: RH_14T with minimal area overhead (RH_14T_small) and RH_14T with substantial area overhead (RH_14T_large), which have critical charges of 30.10 and 38.77 fC, respectively. Given the higher sensitivity of higher order bits compared to lower order bits in image pixels, RH_14T_small was allocated for the least significant bit (LSB) positions. RH_14_large, on the other hand, was used for the most significant bit (MSB) positions within the memory array. This configuration enhanced the array's overall area, power, and space radiation tolerance. Furthermore, the RH_14T model was bench marked against other recently introduced radiation‐hardened SRAM cells and compared proposed RH_14T CC18T, RHC14T, RHMC12T, SARP12T, SRRD12T, DICE, and QUCCE12T across several critical design parameters. Notably, RH_14T's sensitive nodes can recover their original data even after radiation‐induced value flips. In addition to these benefits, RH_14T also demonstrates a high static voltage noise margin and reduced read and write delays compared to most of the cells it was compared with.
- 12 January 2025
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 53 (9) , 5562-5578
Radiation‐Tolerant SRAM for Satellite Image Compression Systems: A Hybrid Memory Array Approach
This work is based on the design of an SRAM memory array for on board satellite image compression systems, including memory size, cost, power efficiency, and vulnerability to single event upsets (SEU). Initially, we designed a memory cell, RH_14T, specifically to mitigate the impact of SEUs. Subsequently, we incorporated RH_14T into the on‐board memory array in two variations: RH_14T with minimal area overhead (RH_14T_small) and RH_14T with substantial area overhead (RH_14T_large), which have critical charges of 30.10 and 38.77 fC, respectively. Given the higher sensitivity of higher order bits compared to lower order bits in image pixels, RH_14T_small was allocated for the least significant bit (LSB) positions. RH_14_large, on the other hand, was used for the most significant bit (MSB) positions within the memory array. This configuration enhanced the array's overall area, power, and space radiation tolerance. Furthermore, the RH_14T model was bench marked against other recently introduced radiation‐hardened SRAM cells and compared proposed RH_14T CC18T, RHC14T, RHMC12T, SARP12T, SRRD12T, DICE, and QUCCE12T across several critical design parameters. Notably, RH_14T's sensitive nodes can recover their original data even after radiation‐induced value flips. In addition to these benefits, RH_14T also demonstrates a high static voltage noise margin and reduced read and write delays compared to most of the cells it was compared with.
- 17 July 2023
- Published by Springer Nature in Microsystem Technologies
- Vol. 29 (10) , 1501-1513
FPGA implementation of proposed number plate localization algorithm based on YOLOv2 (You Only Look Once)
- 17 July 2023
- Published by Springer Nature in Microsystem Technologies
- Vol. 29 (10) , 1501-1513
FPGA implementation of proposed number plate localization algorithm based on YOLOv2 (You Only Look Once)
- 3 April 2023
- Published by Elsevier in Materials Today: Proceedings
Proposed approximate hybrid memory architecture for handheld multimedia devices
- 3 April 2023
- Published by Elsevier in Materials Today: Proceedings
Proposed approximate hybrid memory architecture for handheld multimedia devices