SSSaule Suiintayeva

Saule Suiintayeva

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Saule Suiintayeva has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Application of a Numerical Model for Forecasting the Consequences of an Explosion

    by N.B. Bakhtybayev, K.T. Atageldiyev, O.A. Abil, A.S. Bakhtybayeva, S.YE. Suiintayeva

    The study presents an investigation of the consequences of explosive impacts during blasting operations at the Zhairem deposit using numerical modeling in the Ansys LS-DYNA software package. Based on literature data and the physico-mechanical properties of rock materials, two modeling scenarios were implemented: the explosion of a single blast hole and a group of blast holes. Dependencies of internal and kinetic energies, displacements, velocities, and accelerations of the rock mass, as well as the distribution of stresses and pressures within the rock, were obtained. It was shown that the maximum equivalent stress during the explosion of a single hole reaches 923.73 MPa, corresponding to the zone of intensive rock mass destruction. For a group of blast holes, energy release increases by several orders of magnitude, reaching 1.2×10⁹ J. Characteristic phases of energy transformation and blast wave dynamics were identified, allowing the assessment of hazardous zones and potential consequences of unauthorized explosions. The results of the study can be used to improve the safety of blasting operations and to predict the impact of air-blast overpressure on buildings and structures.

  • Open Access

    ИССЛЕДОВАНИЯ ПРИЧИН ИСКРИВЛЕНИЯ ВЕЕРНЫХ СКВАЖИН НА РУДНИКЕ ВОСХОД

    by С.е. Сүйінтаева, О.а. Әбіл, К.т. Атагелдиев, Д.р. Махмудов

    При бурении взрывных скважин существует высокая вероятность их отклонения от проектного направления. Такие отклонения оказывают отрицательное влияние на результаты буровзрывных работ, вызывая увеличение кусковатости, потери руды и снижение эффективности дробления. Основными причинами являются геологические условия, технические особенности оборудования и технологические ошибки. В данном исследовании проведен комплексный анализ отклонений скважин при веерном бурении на основе геолого-маркшейдерской документации, технических характеристик буровой установки Sandvik DL430-7C и данных о фактической кривизне. По результатам замеров предложены рациональные параметры бурения, позволяющие минимизировать отклонения и повысить эффективность буровзрывных работ Жарылыс ұңғымаларын бұрғылау кезінде олардың жобалық бағыттан ауытқу ықтималдығы жоғары. Мұндай ауытқулар бұрғы-жарылыс жұмыстарының нәтижесіне кері әсер етіп, кесектіліктің артуына, кеннің жоғалымына және жалпы тиімділіктің төмендеуіне әкеледі. Негізгі себептерге геологиялық жағдайлар, жабдықтың техникалық ерекшеліктері мен технологиялық қателіктер жатады. Бұл зерттеуде тарамды бұрғылау кезінде ұңғымалардың ауытқу себептері геологиялық-маркшейдерлік құжаттама, Sandvik DL430-7C бұрғылау қондырғысының техникалық сипаттамалары және нақты ауытқу деректері негізінде кешенді түрде талданды. Өлшеу нәтижелері бойынша ұсынылған ұтымды параметрлер ауытқуларды азайтып, бұрғы-жарылыс жұмыстарының тиімділігін арттырады During the drilling of blast boreholes, there is a high probability of deviation from the designed trajectory. Such deviations negatively affect the results of blasting operations, causing increased rock fragmentation irregularity, ore losses, and reduced overall efficiency. The main causes include geological conditions, technical features of the drilling equipment, and technological errors. In this study, a comprehensive analysis of borehole deviation during fan drilling was carried out using geological and mine surveying documentation, the technical specifications of the Sandvik DL430-7C drill rig, and actual borehole curvature data. Based on the measurements, rational drilling parameters are proposed to minimize deviations and improve blasting efficiency

  • Ensuring a safe geomechanical state of the rock mass surrounding the mine workings in the Karaganda coal basin, Kazakhstan

    by Nurbek Zholmagambetov, Elvira Khalikova, Vladimir Demin, Anna Balabas, Rabbel Abdrashev, Saule Suiintayeva

    Purpose. The research purpose is to determine the instability zones in the host rocks and the dynamics of propagation of active fracturing zones to ensure the stability of the rock mass surrounding the mine workings. Methods. The research uses a set of analytical and experimental studies to determine the dynamics of the deformation process development in the coal-rock mass surrounding the mine workings. Mathematical modeling of the stress-strain state of the rock mass surrounding the active extraction workings is performed using the numerical method of finite elements in modern AN-SYS, Mergel and KMS-III software products. Findings. The influence has been studied of the mine working section shape and the coal seam dip angle on the value of the maximum stresses that arise in the rock mass when the mine working is fastened with the roof-bolt support. The instability zones in the host rocks and the dynamics of propagation of active fracturing zones have been determined both ahead of the front of the conducted mine working and on its sides for rocks of different strength. Originality. For the conditions of the Karaganda coal basin, the dependence of a change in the development of conventional inelastic deformation zones (CIDZ) on the host rock strength has been revealed. The influence of the coal seam dip angle on the dynamics of stratifications around preparatory working has also been substantiated. In addition, new data have been obtained on the influence of the roof rock strength on the stratification of the rock mass surrounding the mine working. Practical implications. By determining instability zones in the host rocks and the dynamics of propagation of active fracturing zones, it is possible to control geomechanical processes in the border rock mass of a mine working and influence it in order to prevent the occurrence of negative rock pressure manifestations. The data obtained are the basis for the development of recommendations on the use of roof-bolting technology for fastening extraction workings to ensure their stability and reduce the cost of their operation.