NTNaofumi Takamatsu

Naofumi Takamatsu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Naofumi Takamatsu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A novel real-time PPP-AR framework for continuous crustal deformation monitoring across Japan

    by Naofumi Takamatsu, Yusaku Ohta, Shengping He, Andreas Brack

  • Open Access

    Stabilizing REGARD with real-time MCMC uncertainty quantification and precise point positioning

    by Keitaro Ohno, Satoshi Abe, Naofumi Takamatsu, Takayuki Miyazaki, Koki Yoshinaga, Chinami Shodai, Mayumi Hashimoto, Riku Yamamoto, Satoshi Kawamoto, Yusaku Ohta

  • Open Access

    Physical constraints for zenith wet delay estimation via inequality constrained least squares in real-time PPP

    by Shengping He, Andreas Brack, Thomas Hobiger, Naofumi Takamatsu, Jens Wickert

    In current conventional precise point positioning (PPP) processing strategies, the tropospheric zenith wet delay (ZWD) is usually dynamically estimated as a stochastic parameter. During the convergence period, ZWD estimates can appear to be negative or unrealistically large due to the low estimation precision, which adversely affects the estimation of other state parameters, especially the Up component of coordinates. To address this issue, we propose a method that incorporates physical constraints on ZWD in PPP processing. This method employs the inequality constrained least squares (ICLS), utilizing Karush–Kuhn–Tucker (KKT) conditions to add boundary conditions on ZWD. The boundary conditions of ZWD are calculated based on the relation between ZWD and relative humidity (RH). The use of physical constraints does not rely on external products or space state representation (SSR) corrections for ZWD during PPP processing and can improve the short-term accuracy of ZWD and coordinate Up component. The efficiency of this approach has been validated using GNSS data and products from GFZ operational networks. For real-time PPP solutions, there is a $$30\%$$ 30 % improvement in short-term accuracy of Up component; for post-processing solutions, the short-term RMSE improvement is about $$20\%$$ 20 % . After convergence, the ZWD upper bound is no longer applied as an ICLS constraint, but is instead used as a diagnostic indicator to identify ZWD anomalies. This indicator demonstrates high sensitivity and reliability under extreme weather conditions, highlighting its potential for application in meteorological hazard early-warning systems.

  • Open Access

    A novel real-time PPP-AR framework for continuous crustal deformation monitoring across Japan

    by Naofumi Takamatsu, Yusaku Ohta, Shengping He, Andreas Brack

    Kinematic Precise Point Positioning (PPP) is a powerful technique for Global Navigation Satellite System (GNSS)-based real-time crustal deformation monitoring. However, PPP float solutions are often affected by sub-daily periodic fluctuations, caused by orbit errors and atmospheric delays, thereby motivating the adoption of PPP with ambiguity resolution (PPP-AR). To enhance PPP-AR performance in the sub-daily domain, we investigated the optimized network configuration for phase bias estimation with respect to network scale and receiver type consistency. Using GEONET observations in Japan together with GFZ real-time orbit and clock products, we sequentially estimated satellite phase biases from receiver-type-specific regional networks and, by applying these estimates, processed 30-s GEONET data from approximately 1,300 stations in a simulated real-time kinematic PPP-AR mode. Two weeks of data in 2025 were analyzed to assess noise characteristics, together with case studies of recent seismic and volcanic deformation events. The results demonstrate significant suppression of long-term (> 2–3 h) coordinate fluctuations associated with GPS satellite orbital resonance while retaining short-term (< 2–3 h) noise levels comparable to those of float solutions. With nearly complete ambiguity resolution, horizontal positioning precision reached the millimeter level (daily standard deviation), representing an improvement of up to 40% relative to float solutions. These improvements were achieved through enhanced phase bias estimates using regional networks and user-side PPP-AR that is consistent with the derived phase bias estimates. The enhanced performance enables the capture of not only co-seismic displacements but also deformations ranging from several centimeters to a decimeter that evolve over several hours to several days, including earthquake swarms, volcanic inflation, and very early post-seismic deformation. Based on these findings, we propose a novel PPP-AR framework in which phase biases are estimated from receiver-type-specific regional networks, followed by user-side PPP-AR employing the same receiver type as that used within the network. This framework extends the applicability of real-time PPP to the sub-daily domain and helps bridge the temporal gap in GNSS-based deformation monitoring.

  • Open Access

    Real-time modeling of transient crustal deformation through the quantification of uncertainty deduced from GNSS data

    by Keitaro Ohno, Yusaku Ohta, Naofumi Takamatsu, Hiroshi Munekane, Masato Iguchi

    We propose a new method for real-time uncertainty monitoring of earthquake and volcano source models using data from the global navigation satellite system (GNSS) and explore its application concerning observation station placement. The Geospatial Information Authority of Japan operates two main types of GNSS earth observation network system (GEONET) coordinates for crustal deformation monitoring on different time scales: post-processing analysis values and real-time GEONET analysis system for rapid deformation monitoring (REGARD). REGARD uses the Markov Chain Monte Carlo (MCMC) method termed real-time automatic uncertainty estimation of a coseismic single rectangular model using GNSS data (RUNE) for single rectangular fault model estimation to handle uncertainty. Thus far, no GNSS monitoring system can automatically detect transient crustal deformation events, such as volcanic activity and earthquake swarms, on timescales of a day or less. We extended RUNE and developed a core program for a new monitoring system for earthquake and volcanic source models and their uncertainties. Our program achieved automatic and stable MCMC utilization for rectangular fault, dike, Mogi, and spheroid models by increasing the computational speed, improving search efficiency, and adjusting hyperparameters. The program automatically determines the standard deviation of the likelihood function assuming a normal distribution with weights for each observation station. The calculation time was within 15 s for 1 × 106 samples on a standard 1U server. We assessed the reliability of the developed method using synthetic and observed GNSS data from the 2015 Sakurajima volcanic event. The results were consistent with the assumed model and previous studies and indicated an advantage in automatically quantifying uncertainty in a short computation time. Based on MCMC samples, we developed a new visualization algorithm to indicate areas on a map in which the number of observation stations should be expanded. We assessed the reliability using data from the 2023 Noto Peninsula earthquake [Mj 6.5]. The results indicate that the algorithm is helpful in studying the placement of stations. The above model extensions and their application are essential to achieve a rapid quantitative understanding of disaster events near urban areas and for utilizing this information in emergency response activities. Graphical Abstract


  • Open Access

    RINGO: A RINEX pre-processing software for multi-GNSS data

    by Satoshi Kawamoto, Naofumi Takamatsu, Satoshi Abe

    We have developed a new multi-GNSS data pre-processing software “RINGO” that provides various features including editing, quality checking, clock jump correction, higher order ionosphere correction, conversion of BINEX and RTCM files, and an interactive viewer for RINEX files. The recent increase in number of GNSS satellites has made GNSS data more complex; however, the software available to pre-process them is very limited. RINGO is a command line tool capable of handling multi-GNSS data, including GPS, QZSS, GLONASS, Galileo, and other systems in RINEX 2.xx, 3.0x, and 4.00 formats, which allows users to easily manage the multi-GNSS data observed at continuously operating reference stations. We present algorithms and applications for each RINGO feature. The results of the quality check feature were compared with results estimated by other existing software packages. Our results agreed well with those of the TEQC software. With RINGO, users can easily pre-process multi-GNSS data without combining multiple tools, and the software will contribute to the popularization of the latest RINEX format. Graphical Abstract


  • Top Cited Papers
    Open Access

    New GEONET analysis strategy at GSI: daily coordinates of over 1300 GNSS CORS in Japan throughout the last quarter century

    by Naofumi Takamatsu, Hiroki Muramatsu, Satoshi Abe, Yuki Hatanaka, Tomoaki Furuya, Yasuaki Kakiage, Kazuyuki Ohashi, Chiaki Kato, Keitaro Ohno, Satoshi Kawamoto

    The station coordinates derived from GNSS (Global Navigation Satellite System) with a conventional static method underpin the study of Earth and planetary science and surveying and mapping. For the continuous provision of high-quality coordinates, it is mandatory to cope with the increasing deviation from the global standard reference frame and the launch of modern GPS (Global Positioning System) satellites. To provide coordinates agreed with ITRF2014 (International Terrestrial Reference Frame 2014) at several millimeters for GEONET (GNSS Earth Observation Network System) in Japan, we developed a new analysis strategy named F5 and assessed the reprocessed station coordinates from 1996. The major updates in F5 can be summarized as incorporating global network processing and enhancements in troposphere modeling. As for the troposphere enhancements, a modern mapping function VMF1 (Vienna Mapping Functions 1) was employed and time intervals for troposphere estimates were shortened. Station coordinates in the global network showed a great agreement with ITRF2014 at several millimeters in the recent 20 years and comparable or slightly better performance with IGS (International GNSS Services) Analysis Centers. The RMS (root mean square) averaged over all GEONET stations indicated very high accuracy of 3.2 mm (horizontal) and 7.3 mm (vertical); the latter accounts for an improvement of roughly 10% from the previous strategy. Sensitivity tests about troposphere estimates revealed that the reduced RMS was completely due to the short time intervals, not the use of VMF1, which contributed to partly suppressing the spurious vertical annual deformation. These results confirm that F5 is sufficiently accurate for the requirements of individual applications and infer the capability of detecting smaller signals the previous strategy could not resolve.Graphical