Endang Wahyu Fitriani
Endang Wahyu Fitriani has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Christina Avanti
Department of Pharmaceutics, Faculty of Pharmacy, University of Surabaya, Surabaya, Indonesia
3 shared publications - Silvia Surini
Laboratory of Pharmaceutics and Pharmaceutical Technology, Faculty of Pharmacy, Universitas Indonesia, Depok, West Java, Indonesia
2 shared publications - Yeva Rosana
Departement of Microbiology, Faculty of Medicine, Universitas Indonesia
2 shared publications Asmaul Fauziah
Universitas Surabaya
1 shared publication- Budi Prasetyo
Department of Obstetrics and Gynecology, Faculty of Medicine, Universitas Airlangga, Indonesia
1 shared publication - Budi Utomo
Universitas Airlangga
1 shared publication
Latest Publications
- Open Access
- 25 February 2026
- Published by Universitas Mataram in Jurnal Penelitian Pendidikan IPA
- Vol. 12 (2) , 154-164
Overall Equipment Effectiveness (OEE) Analysis as a Framework for Mapping the Root Causes of Production Inefficiencies in Cream Filling Processes
This study aims to utilize Overall Equipment Effectiveness (OEE) analysis as a diagnostic framework to identify and map the root causes of performance losses in critical cream filling machinery within a cosmetics manufacturing company in East Java, recognizing that fragmented or piecemeal approaches to evaluating machine performance often fail to capture the interrelated sources of production inefficiency. The research was conducted over a three-month period using a descriptive quantitative method through direct observation of filling machine operations. The collected data included machine operating time, downtime, production output, and defective units. In this study, OEE was applied not merely as a performance indicator but as a loss-based diagnostic tool capable of systematically revealing hidden inefficiencies affecting equipment effectiveness. The results show that OEE values fluctuated significantly between 20.31% and 90.51%, with monthly averages of 71.12%, 80.62%, and 61.29%, respectively. While the quality component remained relatively stable at above 98%, substantial variations were observed in availability and performance due to machine downtime and reduced operating speeds. Further analysis using the Six Big Losses framework identified setup and adjustment time and idling or minor stoppages as the dominant contributors to decreased machine effectiveness, confirming that the filling machine functions as a critical production bottleneck whose instability directly influences production continuity. These losses collectively accounted for the majority of production interruptions and performance deterioration throughout the observation period. The findings underscore the importance of systematically reducing the Six Big Losses to stabilize and improve OEE. Implementing preventive maintenance, minimizing setup time variability, and strengthening operational discipline are therefore essential steps for achieving sustainable improvements in machine effectiveness and overall production efficiency.
- 25 February 2026
- Published by Universitas Mataram in Jurnal Penelitian Pendidikan IPA
- Vol. 12 (2) , 154-164
Open AccessOverall Equipment Effectiveness (OEE) Analysis as a Framework for Mapping the Root Causes of Production Inefficiencies in Cream Filling Processes
This study aims to utilize Overall Equipment Effectiveness (OEE) analysis as a diagnostic framework to identify and map the root causes of performance losses in critical cream filling machinery within a cosmetics manufacturing company in East Java, recognizing that fragmented or piecemeal approaches to evaluating machine performance often fail to capture the interrelated sources of production inefficiency. The research was conducted over a three-month period using a descriptive quantitative method through direct observation of filling machine operations. The collected data included machine operating time, downtime, production output, and defective units. In this study, OEE was applied not merely as a performance indicator but as a loss-based diagnostic tool capable of systematically revealing hidden inefficiencies affecting equipment effectiveness. The results show that OEE values fluctuated significantly between 20.31% and 90.51%, with monthly averages of 71.12%, 80.62%, and 61.29%, respectively. While the quality component remained relatively stable at above 98%, substantial variations were observed in availability and performance due to machine downtime and reduced operating speeds. Further analysis using the Six Big Losses framework identified setup and adjustment time and idling or minor stoppages as the dominant contributors to decreased machine effectiveness, confirming that the filling machine functions as a critical production bottleneck whose instability directly influences production continuity. These losses collectively accounted for the majority of production interruptions and performance deterioration throughout the observation period. The findings underscore the importance of systematically reducing the Six Big Losses to stabilize and improve OEE. Implementing preventive maintenance, minimizing setup time variability, and strengthening operational discipline are therefore essential steps for achieving sustainable improvements in machine effectiveness and overall production efficiency.
- Open Access
- 1 May 2025
- Published by Garval Editorial Ltda. in Journal of Pharmacy & Pharmacognosy Research
- Vol. 13 (3) , 905-918
Novel approach extraction method to obtain optimum antioxidant and skin-lightening compound from Rhodomyrtus tomentosa (Aiton) Hassk. leaves
Context: Rhodomyrtus tomentosa leaves have the potential to be developed as a raw material for traditional medicine or herbal cosmetics. In this study, the green extraction method and the selection of solvents to increase the extraction yield of active compounds and bioactivities from R. tomentosa leaves were carried out. Aims: To develop the environmentally friendly extraction method for R. tomentosa leaves using pharmaceutical excipients and find out the best extraction solvent and conditions that can simultaneously extract the active compound and bioactivities. Methods: R. tomentosa leaves were extracted using 14 different solvents, including conventional solvents and pharmaceutical excipients. The ultrasound-assisted extraction method was chosen to promote the green extraction principles. All the extracts obtained were then evaluated for their phenolic, flavonoid content, antioxidant, and in vitro tyrosinase inhibition activities. Meanwhile, the optimization was carried out using Box Behnken response surface methodology. Results: The ethanolic extract of R. tomentosa leaves has the highest (p<0.05) extraction yield, very strong antioxidant activity, and tyrosinase inhibitory activity compared to water, ethyl acetate, and chloroform. Among 10 excipients tested in this study, propylene glycol has the best (p<0.05) ability to extract R. tomentosa leaves. Propylene glycol was then used in the extraction optimization phase. Our result showed that the extraction conditions for optimizing phenolic compounds were a temperature of 30°C, an extraction time of 40 min, and a solid-to-liquid ratio of 0.05 g/mL. Conclusions: The use of propylene glycol and the UAE method together showed good potential to be developed as a green extraction method for R. tomentosa leaves.
- 1 May 2025
- Published by Garval Editorial Ltda. in Journal of Pharmacy & Pharmacognosy Research
- Vol. 13 (3) , 905-918
Open AccessNovel approach extraction method to obtain optimum antioxidant and skin-lightening compound from Rhodomyrtus tomentosa (Aiton) Hassk. leaves
Context: Rhodomyrtus tomentosa leaves have the potential to be developed as a raw material for traditional medicine or herbal cosmetics. In this study, the green extraction method and the selection of solvents to increase the extraction yield of active compounds and bioactivities from R. tomentosa leaves were carried out. Aims: To develop the environmentally friendly extraction method for R. tomentosa leaves using pharmaceutical excipients and find out the best extraction solvent and conditions that can simultaneously extract the active compound and bioactivities. Methods: R. tomentosa leaves were extracted using 14 different solvents, including conventional solvents and pharmaceutical excipients. The ultrasound-assisted extraction method was chosen to promote the green extraction principles. All the extracts obtained were then evaluated for their phenolic, flavonoid content, antioxidant, and in vitro tyrosinase inhibition activities. Meanwhile, the optimization was carried out using Box Behnken response surface methodology. Results: The ethanolic extract of R. tomentosa leaves has the highest (p<0.05) extraction yield, very strong antioxidant activity, and tyrosinase inhibitory activity compared to water, ethyl acetate, and chloroform. Among 10 excipients tested in this study, propylene glycol has the best (p<0.05) ability to extract R. tomentosa leaves. Propylene glycol was then used in the extraction optimization phase. Our result showed that the extraction conditions for optimizing phenolic compounds were a temperature of 30°C, an extraction time of 40 min, and a solid-to-liquid ratio of 0.05 g/mL. Conclusions: The use of propylene glycol and the UAE method together showed good potential to be developed as a green extraction method for R. tomentosa leaves.
- Open Access
- 12 March 2024
- Published by Pensoft Publishers in Pharmacia
- Vol. 71, 1-15
Nanostructured lipid carriers: A prospective dermal drug delivery system for natural active ingredients
Nanostructured lipid carriers (NLCs) are versatile tools used for several purposes, including drug release modification, adhesion to the skin, film-forming ability followed by hydration of the superficial layers of the skin, as well as high penetration with permeation into and across deeper skin layers. During the formulation of active ingredients sourced from nature into dosage forms, NLCs play a crucial role in overcoming challenges associated with the process. These challenges include poor solubility and skin permeability, sensitivity to light, heat, and oxygen, leading to degraded quality, reduced potency, and probable risks of skin irritation or allergic reactions. Therefore, this review aimed to provide a comprehensive overview of NLCs as effective delivery system through the skin for natural active ingredients. The extensive discussion covers the advantages and disadvantages of a dermal delivery system for these ingredients, focusing on various types, lipids, and surfactants used in the formulation, preparation, and characterization process. Additionally, the recent developments in NLCs technology are explored. The result showed that NLCs would advance into a more efficient, precise, and safe system to transport natural active ingredients dermally.
- 12 March 2024
- Published by Pensoft Publishers in Pharmacia
- Vol. 71, 1-15
Open AccessNanostructured lipid carriers: A prospective dermal drug delivery system for natural active ingredients
Nanostructured lipid carriers (NLCs) are versatile tools used for several purposes, including drug release modification, adhesion to the skin, film-forming ability followed by hydration of the superficial layers of the skin, as well as high penetration with permeation into and across deeper skin layers. During the formulation of active ingredients sourced from nature into dosage forms, NLCs play a crucial role in overcoming challenges associated with the process. These challenges include poor solubility and skin permeability, sensitivity to light, heat, and oxygen, leading to degraded quality, reduced potency, and probable risks of skin irritation or allergic reactions. Therefore, this review aimed to provide a comprehensive overview of NLCs as effective delivery system through the skin for natural active ingredients. The extensive discussion covers the advantages and disadvantages of a dermal delivery system for these ingredients, focusing on various types, lipids, and surfactants used in the formulation, preparation, and characterization process. Additionally, the recent developments in NLCs technology are explored. The result showed that NLCs would advance into a more efficient, precise, and safe system to transport natural active ingredients dermally.
- Open Access
- 1 May 2023
- Published by Garval Editorial Ltda. in Journal of Pharmacy & Pharmacognosy Research
- Vol. 11 (3) , 391-400
Development of nanostructured lipid carrier containing tea tree oil: Physicochemical properties and stability
Context: Tea tree oil (TTO) is an essential oil derived from Melaleuca alternifolia, with high antimicrobial and antifungal potential. Unfortunately, its topical antifungal efficacy is limited because it is volatile, thermolabile and easily oxidized. A formulation has been developed to overcome this problem by encapsulating TTO in a nanostructured lipid carrier (NLC). Aims: To determine the effect of the liquid to solid lipid ratio on the physicochemical properties and the stability of TTO-loaded NLC. Methods: Five formula of TTO-loaded NLCs were produced by high shear homogenization method and characterized according to their particle size, size distribution, polydispersity, zeta potential, thermal characteristics, X-ray diffraction, and terpinen-4-ol concentration. In addition, a stability study was conducted by observing its physical and chemical characteristics during storage in the refrigerator (4 ± 2°C) and at room temperature (27 ± 2°C) for six months. Results: The resulting TTO-loaded NLC had an average droplet size under 400 nm. The particle size increases with increasing amount of liquid lipid in the formula. There were insignificant changes in organoleptic properties, polydispersity index, zeta potential and terpinene-4-ol concentration during stability study for six months. However, the particle size slightly increased during the six months of storage. Furthermore, the NLC 3, which formulated with a 25:95 ratio liquid to solid lipid, was be chosen as the best formula, since it demonstrated the best physicochemical characteristic and stability. Conclusions: TTO-loaded NLC with good physicochemical characteristics and stability has been successfully developed. In addition, NLC 3 is considered as the best NLC formula, which exhibits characteristics and stability that meet the requirements.
- 1 May 2023
- Published by Garval Editorial Ltda. in Journal of Pharmacy & Pharmacognosy Research
- Vol. 11 (3) , 391-400
Open AccessDevelopment of nanostructured lipid carrier containing tea tree oil: Physicochemical properties and stability
Context: Tea tree oil (TTO) is an essential oil derived from Melaleuca alternifolia, with high antimicrobial and antifungal potential. Unfortunately, its topical antifungal efficacy is limited because it is volatile, thermolabile and easily oxidized. A formulation has been developed to overcome this problem by encapsulating TTO in a nanostructured lipid carrier (NLC). Aims: To determine the effect of the liquid to solid lipid ratio on the physicochemical properties and the stability of TTO-loaded NLC. Methods: Five formula of TTO-loaded NLCs were produced by high shear homogenization method and characterized according to their particle size, size distribution, polydispersity, zeta potential, thermal characteristics, X-ray diffraction, and terpinen-4-ol concentration. In addition, a stability study was conducted by observing its physical and chemical characteristics during storage in the refrigerator (4 ± 2°C) and at room temperature (27 ± 2°C) for six months. Results: The resulting TTO-loaded NLC had an average droplet size under 400 nm. The particle size increases with increasing amount of liquid lipid in the formula. There were insignificant changes in organoleptic properties, polydispersity index, zeta potential and terpinene-4-ol concentration during stability study for six months. However, the particle size slightly increased during the six months of storage. Furthermore, the NLC 3, which formulated with a 25:95 ratio liquid to solid lipid, was be chosen as the best formula, since it demonstrated the best physicochemical characteristic and stability. Conclusions: TTO-loaded NLC with good physicochemical characteristics and stability has been successfully developed. In addition, NLC 3 is considered as the best NLC formula, which exhibits characteristics and stability that meet the requirements.
- Open Access
- 31 March 2023
- Published by Journal of Infection in Developing Countries in The Journal of Infection in Developing Countries
- Vol. 17 (03) , 353-358
Comparison of tea tree oil 5%, tea tree oil 10%, and nystatin inhibition zones against vaginal Candida isolates in pregnancy
Introduction: Vulvovaginal candidiasis (VVC) in pregnancy frequently develops into recurrent infections. Clinical study suggests that conventional topical treatments for VVC are not always enough to eradicate Candida spp. from the vaginal microenvironment. This study aimed to evaluate the antifungal activity of tea tree oil (TTO) 5% and TTO 10% against Candida species causing VVC in pregnancy. Methodology: In vitro experimental study was conducted in the Mycology Laboratory at Dermatovenereology Outpatient Clinic Dr. Soetomo General Hospital Surabaya. Eighteen isolates of Candida species were isolated from the vaginal thrush of 15 pregnant women diagnosed with VVC from March to May 2021. Antifungal susceptibility of TTO 5% and TTO 10% was evaluated by the disc diffusion method, with the inhibitory zone diameter as the main outcome. Results: The mean inhibitory zone diameter of TTO 5%, TTO 10%, and nystatin against all Candida spp. was 7.26 mm, 8.64 mm, and 25.57 mm, respectively (p < 0.001). The mean inhibitory zone diameter of TTO 5%, TTO 10%, and nystatin tend to be larger in C. albicans compared to the non-albicans, but the difference is not significant. Nystatin displayed the largest mean inhibitory zone diameters compared to TTO 5% and TTO 10% (p < 0.001) in all Candida species. Increased concentration from TTO 5% to TTO 10% resulted in a slight increment in the mean inhibitory zone diameters in all-Candida species (p = 0.001). Conclusions: Tea Tree Oil displayed antifungal activity against Candida species causing VVC in pregnancy. Further studies are required to investigate optimal TTO concentrations as a VVC treatment in pregnancy.
- 31 March 2023
- Published by Journal of Infection in Developing Countries in The Journal of Infection in Developing Countries
- Vol. 17 (03) , 353-358
Open AccessComparison of tea tree oil 5%, tea tree oil 10%, and nystatin inhibition zones against vaginal Candida isolates in pregnancy
Introduction: Vulvovaginal candidiasis (VVC) in pregnancy frequently develops into recurrent infections. Clinical study suggests that conventional topical treatments for VVC are not always enough to eradicate Candida spp. from the vaginal microenvironment. This study aimed to evaluate the antifungal activity of tea tree oil (TTO) 5% and TTO 10% against Candida species causing VVC in pregnancy. Methodology: In vitro experimental study was conducted in the Mycology Laboratory at Dermatovenereology Outpatient Clinic Dr. Soetomo General Hospital Surabaya. Eighteen isolates of Candida species were isolated from the vaginal thrush of 15 pregnant women diagnosed with VVC from March to May 2021. Antifungal susceptibility of TTO 5% and TTO 10% was evaluated by the disc diffusion method, with the inhibitory zone diameter as the main outcome. Results: The mean inhibitory zone diameter of TTO 5%, TTO 10%, and nystatin against all Candida spp. was 7.26 mm, 8.64 mm, and 25.57 mm, respectively (p < 0.001). The mean inhibitory zone diameter of TTO 5%, TTO 10%, and nystatin tend to be larger in C. albicans compared to the non-albicans, but the difference is not significant. Nystatin displayed the largest mean inhibitory zone diameters compared to TTO 5% and TTO 10% (p < 0.001) in all Candida species. Increased concentration from TTO 5% to TTO 10% resulted in a slight increment in the mean inhibitory zone diameters in all-Candida species (p = 0.001). Conclusions: Tea Tree Oil displayed antifungal activity against Candida species causing VVC in pregnancy. Further studies are required to investigate optimal TTO concentrations as a VVC treatment in pregnancy.
- Open Access
- 2 June 2018
- Published by Universitas Ahmad Dahlan in Pharmaciana
- Vol. 8 (1) , 77-86
Formulation and physical stability test of oleanolic acid cream and gel
Plantago major has been empirically used for wound healing. One of its chemical compounds, oleanolic acid, exhibited wound healing activity on hyperglycemic rats. The aims of this study were to (1) formulate oleanolic acid into topical dosage forms i.e. cream and gel; and (2) evaluate the physical stability of the products. Oleanolic acid was formulated into the dosage forms using stearic acid, isopropyl palmitate and cetyl alcohol as the cream base and carbomer as the gel base. Cream and gel were then subjected into accelerated (40±2°C/75±5% RH) and room temperature (27±2°C/73±5% RH) stability test for six weeks. Physical stability was determined using parameters of visual appearance, specific gravity, viscosity and flow properties, for both gel and cream, as well as the type of emulsion and particle size for the cream. Data analysis were performed using one-way ANOVA and paired t-test. It is concluded that gel and cream of oleanolic acid were able to maintain their visual appearance, specific gravity, viscosity and flow properties during six weeks of storage. In addition, oleanolic acid cream could also maintain its particle size and type of emulsion during testing.
- 2 June 2018
- Published by Universitas Ahmad Dahlan in Pharmaciana
- Vol. 8 (1) , 77-86
Open AccessFormulation and physical stability test of oleanolic acid cream and gel
Plantago major has been empirically used for wound healing. One of its chemical compounds, oleanolic acid, exhibited wound healing activity on hyperglycemic rats. The aims of this study were to (1) formulate oleanolic acid into topical dosage forms i.e. cream and gel; and (2) evaluate the physical stability of the products. Oleanolic acid was formulated into the dosage forms using stearic acid, isopropyl palmitate and cetyl alcohol as the cream base and carbomer as the gel base. Cream and gel were then subjected into accelerated (40±2°C/75±5% RH) and room temperature (27±2°C/73±5% RH) stability test for six weeks. Physical stability was determined using parameters of visual appearance, specific gravity, viscosity and flow properties, for both gel and cream, as well as the type of emulsion and particle size for the cream. Data analysis were performed using one-way ANOVA and paired t-test. It is concluded that gel and cream of oleanolic acid were able to maintain their visual appearance, specific gravity, viscosity and flow properties during six weeks of storage. In addition, oleanolic acid cream could also maintain its particle size and type of emulsion during testing.