Lukas Krause
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lukas Krause has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Kerstin Eckert
Helmholtz-Zentrum Dresden-Rossendorf
4 shared publications - Sven Eckert
Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden-Rossendorf
3 shared publications - Thomas Wondrak
Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden-Rossendorf
3 shared publications K. Eckert
Institue of Fluid Dynamics Helmholtz-Zentrum Dresden-Rossendorf Germany
2 shared publicationsN. Kumar
Institute of Software and Multimedia Technology TU Dresden Germany
2 shared publications- Nishant Kumar
Technische Universität Dresden
2 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (39) , 395103
Contactless detection and characterization of gas bubbles and non-conducting inclusions in liquid metals
This paper presents the method of contactless inductive bubble detection in electrically conductive fluids, such as liquid metals. This measuring technique is also suitable for applications in high-temperature processes for the detection and characterization of non-conductive inclusions. An excitation coil generates an alternating magnetic field which penetrates the fluid and induces eddy currents within it. The appearance of electrically non-conductive inclusions, such as gas bubbles and slag, in the otherwise highly conductive liquid, alters the current distribution and can be detected by monitoring the corresponding magnetic field outside the liquid. We demonstrate that even a single sensor is sufficient to reliably detect the presence of inclusions and estimate their velocity. Based on numerical simulations, we present a multi-sensor detection system to determine key properties of individual spherical non-conductive inclusions, such as size and position. The capabilities for reconstructing inclusion properties are investigated using various sensor combinations. This study experimentally validates a suitable configuration that involves a minimal number of sensors for the robust reconstruction of the position and size of these inclusions.
- 30 September 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (39) , 395103
Open AccessContactless detection and characterization of gas bubbles and non-conducting inclusions in liquid metals
This paper presents the method of contactless inductive bubble detection in electrically conductive fluids, such as liquid metals. This measuring technique is also suitable for applications in high-temperature processes for the detection and characterization of non-conductive inclusions. An excitation coil generates an alternating magnetic field which penetrates the fluid and induces eddy currents within it. The appearance of electrically non-conductive inclusions, such as gas bubbles and slag, in the otherwise highly conductive liquid, alters the current distribution and can be detected by monitoring the corresponding magnetic field outside the liquid. We demonstrate that even a single sensor is sufficient to reliably detect the presence of inclusions and estimate their velocity. Based on numerical simulations, we present a multi-sensor detection system to determine key properties of individual spherical non-conductive inclusions, such as size and position. The capabilities for reconstructing inclusion properties are investigated using various sensor combinations. This study experimentally validates a suitable configuration that involves a minimal number of sensors for the robust reconstruction of the position and size of these inclusions.
- Open Access
- 1 March 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (3)
Magnetohydrodynamic effect during electrodeposition at conically structured electrodes
Micro- and nano-sized conical structures hold great potential in tailoring the surface wettability and in enhancing electrocatalytic applications. However, their manufacturing process remains a formidable challenge. This work investigates whether and how magnetic fields could support the manufacture of such surfaces by electrodeposition. Through a combination of experiments and numerical simulations, we systematically investigate the magnetic field structuring effect at single dia- and ferromagnetic cones of mm size and at neighboring cones at varying distances. The results provide a first experimental proof of the magnetic-field-driven flow caused by the magnetization of the cones themselves and on the impact of neighboring cones, which helps to understand the resulting mass transfer at different scales. When a uniform external magnetic field is oriented perpendicular to the substrate, the magnetic gradient force enabled by the magnetization of ferromagnetic cones can generate a beneficial electrolyte flow and support the conical growth, thereby often dominating over the Lorentz and buoyancy forces arising from the electrode reactions. With a magnetic field of 200 mT and a current density of 16 mA/cm2, the deposit thickness at the cone tip can be increased by 73% for ferromagnetic and 9% for diamagnetic cones after 10 s of deposition. At smaller cone distances, the magnetic-field-driven flow becomes weaker. However, the magnetic gradient force could sustain a supportive flow to promote conical growth. Our study confirms that the magnetic gradient force is a promising means during electrodeposition for generating flow-enhanced mass transfer to support conical growth at arrays of small surface elevations.
- 1 March 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (3)
Open AccessMagnetohydrodynamic effect during electrodeposition at conically structured electrodes
Micro- and nano-sized conical structures hold great potential in tailoring the surface wettability and in enhancing electrocatalytic applications. However, their manufacturing process remains a formidable challenge. This work investigates whether and how magnetic fields could support the manufacture of such surfaces by electrodeposition. Through a combination of experiments and numerical simulations, we systematically investigate the magnetic field structuring effect at single dia- and ferromagnetic cones of mm size and at neighboring cones at varying distances. The results provide a first experimental proof of the magnetic-field-driven flow caused by the magnetization of the cones themselves and on the impact of neighboring cones, which helps to understand the resulting mass transfer at different scales. When a uniform external magnetic field is oriented perpendicular to the substrate, the magnetic gradient force enabled by the magnetization of ferromagnetic cones can generate a beneficial electrolyte flow and support the conical growth, thereby often dominating over the Lorentz and buoyancy forces arising from the electrode reactions. With a magnetic field of 200 mT and a current density of 16 mA/cm2, the deposit thickness at the cone tip can be increased by 73% for ferromagnetic and 9% for diamagnetic cones after 10 s of deposition. At smaller cone distances, the magnetic-field-driven flow becomes weaker. However, the magnetic gradient force could sustain a supportive flow to promote conical growth. Our study confirms that the magnetic gradient force is a promising means during electrodeposition for generating flow-enhanced mass transfer to support conical growth at arrays of small surface elevations.
- Open Access
Robust Reconstruction of the Void Fraction from Noisy Magnetic Flux Density Using Invertible Neural Networks
Electrolysis stands as a pivotal method for environmentally sustainable hydrogen production. However, the formation of gas bubbles during the electrolysis process poses significant challenges by impeding the electrochemical reactions, diminishing cell efficiency, and dramatically increasing energy consumption. Furthermore, the inherent difficulty in detecting these bubbles arises from the non-transparency of the wall of electrolysis cells. Additionally, these gas bubbles induce alterations in the conductivity of the electrolyte, leading to corresponding fluctuations in the magnetic flux density outside of the electrolysis cell, which can be measured by externally placed magnetic sensors. By solving the inverse problem of the Biot–Savart Law, we can estimate the conductivity distribution as well as the void fraction within the cell. In this work, we study different approaches to solve the inverse problem including Invertible Neural Networks (INNs) and Tikhonov regularization. Our experiments demonstrate that INNs are much more robust to solving the inverse problem than Tikhonov regularization when the level of noise in the magnetic flux density measurements is not known or changes over space and time.
Open AccessRobust Reconstruction of the Void Fraction from Noisy Magnetic Flux Density Using Invertible Neural Networks
Electrolysis stands as a pivotal method for environmentally sustainable hydrogen production. However, the formation of gas bubbles during the electrolysis process poses significant challenges by impeding the electrochemical reactions, diminishing cell efficiency, and dramatically increasing energy consumption. Furthermore, the inherent difficulty in detecting these bubbles arises from the non-transparency of the wall of electrolysis cells. Additionally, these gas bubbles induce alterations in the conductivity of the electrolyte, leading to corresponding fluctuations in the magnetic flux density outside of the electrolysis cell, which can be measured by externally placed magnetic sensors. By solving the inverse problem of the Biot–Savart Law, we can estimate the conductivity distribution as well as the void fraction within the cell. In this work, we study different approaches to solve the inverse problem including Invertible Neural Networks (INNs) and Tikhonov regularization. Our experiments demonstrate that INNs are much more robust to solving the inverse problem than Tikhonov regularization when the level of noise in the magnetic flux density measurements is not known or changes over space and time.
- Open Access
- 10 January 2024
- Published by MDPI AG in Preprints.org
Robust Reconstruction of the Void Fraction from Noisy Magnetic Flux Density using Invertible Neural Networks
Electrolysis stands as a pivotal method for environmentally sustainable hydrogen production. However, the formation of gas bubbles during the electrolysis process poses significant challenges by impeding the electrochemical reactions, diminishing cell efficiency, and dramatically increasing energy consumption. Furthermore, the inherent difficulty in detecting these bubbles arises from the non-transparency of the wall of electrolysis cells. Additionally, these gas bubbles induce alterations in the conductivity of the electrolyte, leading to corresponding fluctuations in the magnetic flux density outside of the electrolysis cell, which can be measured by externally placed magnetic sensors. By solving the inverse problem of the Biot-Savart Law, we can estimate the conductivity distribution as well as the void fraction within the cell. In this work, we study different approaches to solve the inverse problem including Invertible Neural Networks (INNs) and Tikhonov regularization. Our experiments demonstrate that INNs are much more robust to solving the inverse problem than Tikhonov regularization when the level of noise in the magnetic flux density measurements is not known or changes over space and time.
- 10 January 2024
- Published by MDPI AG in Preprints.org
Open AccessRobust Reconstruction of the Void Fraction from Noisy Magnetic Flux Density using Invertible Neural Networks
Electrolysis stands as a pivotal method for environmentally sustainable hydrogen production. However, the formation of gas bubbles during the electrolysis process poses significant challenges by impeding the electrochemical reactions, diminishing cell efficiency, and dramatically increasing energy consumption. Furthermore, the inherent difficulty in detecting these bubbles arises from the non-transparency of the wall of electrolysis cells. Additionally, these gas bubbles induce alterations in the conductivity of the electrolyte, leading to corresponding fluctuations in the magnetic flux density outside of the electrolysis cell, which can be measured by externally placed magnetic sensors. By solving the inverse problem of the Biot-Savart Law, we can estimate the conductivity distribution as well as the void fraction within the cell. In this work, we study different approaches to solve the inverse problem including Invertible Neural Networks (INNs) and Tikhonov regularization. Our experiments demonstrate that INNs are much more robust to solving the inverse problem than Tikhonov regularization when the level of noise in the magnetic flux density measurements is not known or changes over space and time.
- Open Access
- 1 January 2024
- Published by AMA Service GmbH
- p. 23-26
2.3 - A new sensor concept to localize non-conducting void fractions in liquid metal based on the measured magnetic field
- 1 January 2024
- Published by AMA Service GmbH
- p. 23-26
Open Access2.3 - A new sensor concept to localize non-conducting void fractions in liquid metal based on the measured magnetic field
- Open Access
Current Tomography -- Localization of void fractions in conducting liquids by measuring the induced magnetic flux density
A novel concept of a measurement technology for the localization and determination of the size of gas bubbles is presented, which is intended to contribute to a further understanding of the dynamics of efficiency-reducing gas bubbles in electrolyzers. A simplified proof-of-concept (POC) model is used to numerically simulate the electric current flow through materials with significant differences in electrical conductivity. Through an automated approach, an extensive data set of electric current density and conductivity distributions is generated, complemented with determined magnetic flux densities in the surroundings of the POC cell at virtual sensor positions. The generated data set serves as testing data for various reconstruction approaches. Based on the measurable magnetic flux density, solving Biot-Savarts law inversely is demonstrated and discussed with a model-based solution of an optimization problem, of which the gas bubble locations are derived.
Open AccessCurrent Tomography -- Localization of void fractions in conducting liquids by measuring the induced magnetic flux density
A novel concept of a measurement technology for the localization and determination of the size of gas bubbles is presented, which is intended to contribute to a further understanding of the dynamics of efficiency-reducing gas bubbles in electrolyzers. A simplified proof-of-concept (POC) model is used to numerically simulate the electric current flow through materials with significant differences in electrical conductivity. Through an automated approach, an extensive data set of electric current density and conductivity distributions is generated, complemented with determined magnetic flux densities in the surroundings of the POC cell at virtual sensor positions. The generated data set serves as testing data for various reconstruction approaches. Based on the measurable magnetic flux density, solving Biot-Savarts law inversely is demonstrated and discussed with a model-based solution of an optimization problem, of which the gas bubble locations are derived.
- 3 April 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (14) , 18290-18299
Hydrogen Bubble Size Distribution on Nanostructured Ni Surfaces: Electrochemically Active Surface Area Versus Wettability
Emerging manufacturing technologies make it possible to design the morphology of electrocatalysts on the nanoscale in order to improve their efficiency in electrolysis processes. The current work investigates the effects of electrode-attached hydrogen bubbles on the performance of electrodes depending on their surface morphology and wettability. Ni-based electrocatalysts with hydrophilic and hydrophobic nanostructures are manufactured by electrodeposition, and their surface properties are characterized. Despite a considerably larger electrochemically active surface area, electrochemical analysis reveals that the samples with more pronounced hydrophobic properties perform worse at industrially relevant current densities. High-speed imaging shows significantly larger bubble detachment radii with higher hydrophobicity, meaning that the electrode surface area that is blocked by gas is larger than the area gained by nanostructuring. Furthermore, a slight tendency toward bubble size reduction of 7.5% with an increase in the current density is observed in 1 M KOH.
- 3 April 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (14) , 18290-18299
Hydrogen Bubble Size Distribution on Nanostructured Ni Surfaces: Electrochemically Active Surface Area Versus Wettability
Emerging manufacturing technologies make it possible to design the morphology of electrocatalysts on the nanoscale in order to improve their efficiency in electrolysis processes. The current work investigates the effects of electrode-attached hydrogen bubbles on the performance of electrodes depending on their surface morphology and wettability. Ni-based electrocatalysts with hydrophilic and hydrophobic nanostructures are manufactured by electrodeposition, and their surface properties are characterized. Despite a considerably larger electrochemically active surface area, electrochemical analysis reveals that the samples with more pronounced hydrophobic properties perform worse at industrially relevant current densities. High-speed imaging shows significantly larger bubble detachment radii with higher hydrophobicity, meaning that the electrode surface area that is blocked by gas is larger than the area gained by nanostructuring. Furthermore, a slight tendency toward bubble size reduction of 7.5% with an increase in the current density is observed in 1 M KOH.