QDQingming Dong

Qingming Dong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qingming Dong has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Electrohydrodynamic effect on sessile droplet evaporation: A review

    by Longwei Zeng, Zhentao Wang, Shifan Ouyang, Jue Wang, Jun Zheng, Qingming Dong, Junfeng Wang

    Droplet evaporation is a ubiquitous and fundamental physical process that is highly sensitive to external fields. This paper reviews the underlying mechanisms and various phenomena associated with sessile droplet evaporation under the influence of an electric field, with a particular focus on electric deformation, electrowetting, and internal convection. When an external electric field is applied, polarization forces deform the droplet, leading to a reduction in the solid–liquid contact angle and an enlargement of the contact area, thereby accelerating the evaporation process. However, when the electric field is excessively strong, the resulting large deformation can increase thermal resistance, ultimately inhibiting evaporation. In addition, electrohydrodynamic effects induced by electric stresses generate circulation vortices within the droplet, enhancing surface heat flux and promoting evaporation. When alternating electric fields are applied, droplet oscillations further drive internal flow and surface deformation, modulating both heat and mass transfer characteristics. From a molecular perspective, polarization-induced charge asymmetry, the disruption of hydrogen bonding networks, and electrophoretic migration of molecules collectively contribute to variations in sessile droplet evaporation behavior.


  • Jet thinning and charge transport mechanism in the transition region of cone-jet electrospray

    by Yongzhong Chen, Zhentao Wang, Wei Xiang, Yuanping Huo, Qingming Dong, Junfeng Wang, Jiyuan Tu

    Cone-jet electrospray has been extensively studied and applied in industrial fields. In this work, we investigate the evolution of the jet and charge transport in the transition region from cone to jetting combining theory, visualization, and simulation. A two-dimensional model is developed, yielding a scaling law for the jet diameter as d∼z−0.25, primarily governed by the interaction between surface charge and the axial electric field. Experimental results for ethylene glycol and anhydrous ethanol confirm the power-law (d∼za) decay of the jet diameter with axial distance (z). The exponent a ranges from −0.35 to −0.21 for ethylene glycol and from −0.28 to −0.22 for anhydrous ethanol, closely aligning with the theoretical value of a = −0.25. The jet diameter also exhibits a nonlinear dependence on flow rate, consistent with the scaling relation d/d0∼(Q/Q0)c. Numerical results further validate these findings and elucidate the underlying current transport mechanisms. For ethylene glycol, the charge transport transitions from conduction-dominated to co-dominated by conduction and convection, whereas for anhydrous ethanol, with its higher conductivity and lower viscosity, conduction current remains dominant throughout the transition region. Additionally, the surface charge distribution was measured, revealing that the transition region essentially represents a dynamic equilibrium between electrostatic stress, viscous stress, and surface tension. This work establishes a universal scaling law for jet thinning in the transition region and provides essential insights into the formation mechanism of the steady cone-jet.


  • Electrohydrodynamic interaction of a tandem unequal-size droplet pair under the non-reciprocal effect

    by Xiang Zhou, Qingming Dong, Jingang Lu, Yuanyuan Gu, Zhentao Wang, Junfeng Wang

    Tandem identical drops subjected to a uniform electric field (an over-idealized model in view of practical application) exhibit the simple electrocoalescence or repulsion because of the electric dipole–dipole interaction and the flow-induced electrohydrodynamic interaction. However, the unequal-size droplet pair creates a non-equilibrium dynamic system driven by the non-reciprocal interactions, where drops are expected to exhibit more complex dynamic behaviors. In addition, the Quincke rotation, a novel electrohydrodynamic behavior, converts the stresslet-quadrupole flow structure into the rolet structure. The bifurcation of the hydrodynamic interaction nature undoubtedly induces the unidentified yet pair dynamics. Motivated by these, a systematic numerical analysis is carried out by tuning R at the fixed viscosity ratio λ (=μi/μo) = 10.0, S = 0.5, and CaE = 0.4 (=εiE02aL/γ, represents the ratios of electric stress and surface tension stress) to identify the behavior diversity under the non-reciprocal effect and Quincke-rotation effect, and reveal the implied mechanisms. In this work, six dynamic patterns are discovered by varying R at e = 0.5: planet-like orbital rotation at R < 0.4; electrocoalescence at 0.4 ≤ R < 0.65; stationary state at R = 0.65; expulsion model at 0.65 < R ≤ 0.8; repulsion at 0.8 < R < 2; Quincke-like rotation model at R ≥ 2. Furthermore, the e-dependent transition feature of motion models is investigated. Two droplets always remain stationary at R = 0.65 regardless of the size ratio e. For e > 0.8, the expulsion pattern disappears. When e is reduced, the critical R needed to initiate Quincke-like rotation of the drop pair rises, until this dynamic activity stops happening at e ≤ 0.1.


  • Cone-jet regime in electrospray: A comprehensive review

    by Jiayi Xue, Zhentao Wang, Yongzhong Chen, Jue Wang, Jiameng Tian, Bin Li, Xiaoying Wang, Haojie Xu, Yuanping Huo, Qingming Dong, et al.

    Cone jet is a very important and promising mean in electrohydrodynamic atomization or electrospray, where a liquid cone forms at the end of a capillary tube at a rational range of potential and flow rate and a permanent, stable, and thin jet emerges from the cone tip and further disintegrates into plenty of fine drops. Owing to several advantages of uniform and microscale drop size, high-charge density, and precise trajectory control, the cone-jet electrospray effectively meets a wide range of application requirements. This work provides a critical review the recent experiments, theories, analysis, and numerical simulations concerning the formation and evolution of Taylor cone and cone jet, as well as the subsequent jet breakup and drops generation. Our aim is to offer a comprehensive understanding of the underlying physics of the process of cone jet, including the conditions for the formation and the stable operation of the cone jet, and the universal scaling laws governing minimum flow rate, drop size, and electric current, as well as the instability of cone jet. In addition, the coaxial Taylor cone jets and the recent numerical studies on cone-jet dynamics are also briefly reviewed.


  • A comprehensive study of interpolation methods in electrohydrodynamic cone-jet across diverse liquid conductivities

    by Kofi Owusu-Sekyere, Yongzhong Chen, Jiameng Tian, Junfeng Wang, Qingming Dong, Zhentao Wang

    Accurate modeling of electrohydrodynamic atomization (EHDA) in the cone-jet regime requires reliable interpolation of fluid properties—such as permittivity, conductivity, and viscosity—across the liquid–gas interface. While the weighted arithmetic mean (WAM) is widely used in two-phase simulations due to its simplicity and stability, it may introduce significant inaccuracies in electrohydrodynamic (EHD) applications by over-smoothing critical property gradients. This study presents a comprehensive comparative analysis of five mean interpolation methods—weighted arithmetic mean (WAM), weighted harmonic mean (WHM), geometric mean (GM), modified geometric mean (mGM), and power-law mean (PLM)—for modeling electrohydrodynamic atomization (EHDA) processes under varying conductivity regimes. By evaluating their performance on key EHD metrics such as surface charge distribution, cone-jet dynamics, droplet size, jet breakup, and beam current, we reveal the strengths and limitations of each method. Numerical results were validated against experimental data and established scaling laws. For low-conductivity fluids, WAM demonstrated superior accuracy in predicting droplet sizes and beam currents due to its balanced interpolation and numerical robustness, while WHM offered stronger charge retention at the expense of stability. GM, mGM, and PLM provided improved physical accuracy under conditions of assured numerical stability. In the medium-conductivity regime, WHM emerged as the most effective method for capturing interfacial charge dynamics and droplet formation, although WAM excelled in predicting geometric features such as jet length and Taylor-cone height. For high-conductivity fluids, all five interpolation schemes yielded comparable results, accurately estimating droplet sizes and beam currents within a 5% margin of experimental values. The findings underscore the importance of selecting appropriate interpolation methods based on fluid conductivity, with WAM favored for low-conductivity fluids, WHM for medium-conductivity systems, and flexibility among all schemes for high-conductivity scenarios. These findings provide practical guidance for selecting or tuning interpolation methods in two-phase EHD simulations and establish a robust framework for improving numerical reliability in multiphase electrohydrodynamic modeling.


  • Sessile droplet evaporation in the uniform electric field: A lattice Boltzmann method study

    by Shifan Ouyang, Zhentao Wang, Jue Wang, Qingming Dong, Junfeng Wang

    Droplet evaporation plays a critical role in nature, science, and industrial applications. The electric field is usually regarded as an effective method to enhance heat and mass transfer. In this work, the evaporation of sessile droplets in the uniform electric field has been numerically studied coupling the mass, momentum, energy, and Poisson equations solved by a lattice Boltzmann method. The results indicate that the heat transfer is affected by the electric field, wettability, and liquid physical properties. The deformation direction of the droplet in the electric field depends on the liquid physical properties, where the prolate deformation occurs with Rσ>Sε and the oblate deformation occurs with Rσ<Sε. When the contact angle is 90°, for a prolate droplet, the evaporation is first enhanced and then hindered in the presence of an electric field, while for an oblate droplet, the evaporation is constantly improved. When the droplet is placed on the hydrophilic (θ0=40°) surface or hydrophobic (θ0=140°) surface, the influence of the electric field gets complicated. The synergistic effect of the electric field and wettability on droplet evaporation strongly depends on the completion of heat convection between the gas and liquid, and heat conduction between the liquid and substrate.


  • Self-propulsion of a Quincke droplet under complex wall conditions

    by Zonglu Xie, Qingming Dong, Zhentao Wang, Xingang Zhao, Guohua Hu

    Currently, existing approaches to droplet self-propulsion largely rely on the superhydrophobic substrate, due to its lower adhesion force. Based on the Quincke rotation, a novel self-propulsion approach is proposed by Xie et al. [“Self-propulsion of a Quincke droplet on a superhydrophobic wall under low electric Reynolds number ReE ≤ 1,” Phys. Fluids 36, 087131 (2024)]. In this scheme, the Quincke rotation effect first allows the droplet to separate from the wall. Under the influence of the wall, the rotating movement of a droplet floating above the wall is converted into a rolling movement (rotation and translation), thus realizing the self-propulsion. It appears that the new approach relaxes the limitation of the superhydrophobic wall. Motivated by this, a two dimensional numerical study about the dynamic behaviors of droplets on the wall with varied contact angles (α) is carried out. The results show that the contact angle plays a crucial role in the activation of droplet self-propulsion. For α < 150°, a longer contact line is created, and the Quincke rotation effect gives rise to complex contact line dynamics. As α < 90°, the droplet spreads along the wall due to the rotating effect. As a result, the droplet is unable to detach from the wall and produce the self-propulsion. As 90° ≤ α < 150° (hydrophobic wall), the Quincke rotation enables the contact line to separate from the wall and achieve droplet self-propulsion. This indicates that droplet self-propulsion is no longer restricted to the superhydrophobic wall. To further expand the application of this new approach, droplet climbing on the inclined wall is also investigated. In this case, a component of the gravity (gsinβ, β is the slope of inclined wall) has two effects on the droplet behaviors: increasing droplet deformation and slowing the droplet motion. It is found that as β ≥ 20° or E*0 (dimensionless electric field strength) ≥ 27.12, the droplet cannot perform the anti-gravity motion.


  • Electrospray modes of liquids in electrohydrodynamic atomization: A review

    by Zhentao Wang, Yongzhong Chen, Jiayi Xue, Bin Li, Jue Wang, Qingming Dong

    Liquid is sprayed from a capillary tube and further disperses into fine drops in various means, when subjected to an externally electric field, where the process of liquid jet formation and breakup into drops is usually named as electrohydrodynamic atomization or electrospray (ES). Electrospray has been extensively applied into many fields because uniform and highly charged drops, easy controllability in size and motion, and various ES modes are available to match the requirements of various applications. In present work, recent progresses in theory and numerical work to explain electrospray structure and drop formation were summarized. According to the geometry of liquid ejection and its further disintegration, main ES modes including dripping, micro-dripping, spindle, cone-jet, multi-jet, and simple-jet have been designated. The transformation of ES modes due to variation of electric potential, liquid flow rate, and physical parameters, the formation of curved liquid surface, and jet fragmentation behavior in these ES modes were also reviewed, as well as generated drops dynamics. In a rational range of flow rate, dripping, micro-dripping, spindle, cone-jet, multi-jet modes successively emerge with an increase in electric potential, and otherwise, an irregular instability may occur. In addition, the simple jet mode occurs in a relatively large flow rate. The insight into ES modes may fully understand mechanism and technology of electrospray and further promote more extensive application in industrial fields.


  • Lattice Boltzmann study of droplet dynamic behaviors impinging on textured surfaces under an external electric field

    by Jiang Yao, Junfeng Wang, Haojie Xu, Lei Zuo, Bufa Li, Qingming Dong

    Textured surfaces contribute to enhancing the cooling effectiveness of electrostatic spray, while the droplet impacting dynamics on such substrates under the influence of electric field are crucial for cooling efficiency. This study utilized a multiphase lattice Boltzmann method combined with the leaky dielectric model to systematically examine the dynamics of droplet impingement on textured surfaces when exposed to electric field. The impact of Weber number, microstructural surface parameters, and electric field strength on droplet impact behavior was discussed in detail. Simulation outcomes reveal that, without the presence of an electric field, the impingement of droplets on textured surfaces results in three distinct deposition states: the Cassie state, partial penetration state, and Wenzel state, primarily contingent upon the surface solid fraction and the droplet impingement velocity. In the Cassie impact regime influenced by an applied electric field, the droplet spreading behaviors exhibit minimal sensitivity to the electric field, with surface tension and inertia primarily governing the spreading dynamics. Throughout the retraction stage, the droplet elongated the direction of the electric field as a result of electric field forces, and eventually, as the electric field strength grows, it bounces off the surface. In the Wenzel impact regime, as the strength of the electric field escalates, the droplet undergoes upward stretching and splits into satellite droplets during the retraction phase, attributed to the dynamic pressure and electrostatic pressure at the apex exceeding the capillary pressure and gravity. These findings could aid in advancing electrostatic spray cooling technology.


  • Self-propulsion of a Quincke droplet on a superhydrophobic wall under low electric Reynolds number ReE≤ 1

    by Zonglu Xie, Qingming Dong, Amalendu Sau, Zhentao Wang

    A rotating object placed on a wall can generate an additional translating motion. Inspired by this phenomenon, we unfold a novel approach to the self-propulsion of a Quincke rotating drop in the current two-dimensional numerical simulation based on the resting wall effect. Accordingly, the impact of two controlling variables, the electric field strength E0* and viscosity ratio λ, is examined in detail for a Quincke drop resting on a superhydrophobic wall. We consider a fixed conductivity ratio and permittivity ratio to (i) explore the dynamic activities of the droplet to verify the proposed self-propulsion scheme and (ii) reveal the physical propelling mechanism. Our results show that the Quincke drop displays three distinct states. (I) Taylor state (where the symmetry in dynamic behaviors is the primary indicator). (II) Transition stage from a Taylor regime to the Quincke regime, when the symmetry is broken and the created asymmetric flow causes the droplet to detach from the wall. At this stage, the tuned controlling parameters led to diverse droplet detachment processes, significantly influencing the subsequent self-propulsion. Additionally, based on the droplet behaviors in the transition stage for 6.78 < E0* ≤ 57.63 at fixed λ = 50, three distinct propulsion patterns are discovered: one-way propulsion for 6.78 < E0* < 9.5, round trip propulsion for 9.5 ≤ E0* < 33.9, and liquid film-breakup propulsion for 33.9 ≤ E0* ≤ 57.63. (III) Self-propulsion stage. Here, the levitated droplet entrains the bulk fluid into the bottom, preventing its re-depositing on the wall by creating a liquid cushion between the Quincke rotating drop and the wall. This thin liquid cushion generates a higher viscous stress at the droplet's bottom, causing a significant velocity difference between its upper and lower halves. This velocity difference produces the crucial horizontal translation for the rotating droplet, i.e., the self-propulsion. Moreover, the liquid cushion's thickness (h*) affects the translation velocity. A higher E0* or λ leads to a smaller h* and expedites the droplet translation.