Ogün Bozkaya
Ogün Bozkaya has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Esra Bozkaya
Kirikkale Universitesi
3 shared publications - Hüsamettin Eki̇ci̇
Kırıkkale University, Faculty of Veterinary Medicine, Department of Pharmacology and Toxicology
2 shared publications - Mustafa Yiğitoğlu
Kirikkale Universitesi
2 shared publications - Seda Ekici
Veterinary Control Central Research Institute, Ankara, Türkiye
2 shared publications - Zehra Gün Gök
Kirikkale Universitesi
2 shared publications - Ayşe Demiral
Department of Translational Medicine, Institute of Health Sciences, Ankara Yıldırım Beyazıt University, Ankara 06760, Türkiye
1 shared publication
Latest Publications
- 21 September 2024
- Published by Springer Nature in Veterinary Research Communications
- Vol. 48 (6) , 3813-3821
Investigation of the biological activity and toxicity of bioactive silver nanoparticles synthesized via Vitex agnus-castus seed extract on honey bees
In this study, silver nanoparticles (AgNPs) coated with bioactive molecules were synthesized via Vitex agnus-castus L. (VAC) seed extract (VAC/AgNPs). The synthesized VAC/AgNPs were characterized by surface plasmon resonance (SPR) ultraviolet-visible region spectroscopy (UV-Vis). The hydrodynamic size and surface charge analysis of the particles were measured with a Zeta sizer. The results of UV-Vis and Zeta analysis revealed that AgNPs were synthesized, the size distribution was nanoscale, and the solution was stable. The effects of the synthesized VAC/AgNPs and aqueous extract of VAC seeds on honeybees were investigated by means of lifespan test and histopathological analysis. It was determined that both VAC seed extract and VAC/AgNPs were non-toxic to honeybees at certain doses, positively affected their life span and contributed to their longevity in the life span test. Furthermore, no adverse effects were detected in terms of intestinal health in histopathological examinations. Therefore, VAC/AgNPs are considered to be a promising bioactive agent for honeybees.
- 21 September 2024
- Published by Springer Nature in Veterinary Research Communications
- Vol. 48 (6) , 3813-3821
Investigation of the biological activity and toxicity of bioactive silver nanoparticles synthesized via Vitex agnus-castus seed extract on honey bees
In this study, silver nanoparticles (AgNPs) coated with bioactive molecules were synthesized via Vitex agnus-castus L. (VAC) seed extract (VAC/AgNPs). The synthesized VAC/AgNPs were characterized by surface plasmon resonance (SPR) ultraviolet-visible region spectroscopy (UV-Vis). The hydrodynamic size and surface charge analysis of the particles were measured with a Zeta sizer. The results of UV-Vis and Zeta analysis revealed that AgNPs were synthesized, the size distribution was nanoscale, and the solution was stable. The effects of the synthesized VAC/AgNPs and aqueous extract of VAC seeds on honeybees were investigated by means of lifespan test and histopathological analysis. It was determined that both VAC seed extract and VAC/AgNPs were non-toxic to honeybees at certain doses, positively affected their life span and contributed to their longevity in the life span test. Furthermore, no adverse effects were detected in terms of intestinal health in histopathological examinations. Therefore, VAC/AgNPs are considered to be a promising bioactive agent for honeybees.
- Open Access
- 18 August 2024
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 309 (12)
Evaluation of Burn Wound Healing Efficacy and Biocompatibility of Centella asiatica Mediated Synthesised AgNPs Loaded Hybrid Nanofiber Scaffold: In Vitro and In Vivo Studies
The aim of this study is to evaluate the cell responses, potential skin reactions during the treatment process and burn wound healing efficacy of electrospun polycaprolactone/polyethylene oxide (PCL/PEO) nanofibers (NFs) containing Centella asiatica mediated synthesized silver nanoparticles (CA‐AgNPs) by in vitro and in vivo studies. Apoptosis‐necrosis, genotoxicity, hemolysis, and cell attachment studies are carried out within the scope of in vitro tests, and irritation, sensitivity, and burn wound studies are carried out within the scope of in vivo tests. The apoptotic index value of CA‐AgNPs‐[PCL/PEO] NFs material on L929 fibroblast cells is determined as 5.0 ± 1.0% at the highest concentration and the necrotic index value is 5.0 ± 0.3%. Micronucleus rates (%) of NFs treated with CHO (Chinese Hamster Ovary) cells are not at genotoxic level. The hemolytic index value of NFs dressing is determined as 0.23 ± 0.03%, The primary irritation index (PII) value of NFs wound dressing is calculated as 0.36 by irritation tests. In addition, the potential sensitization reaction of NFs extract on guinea pigs is evaluated and the sensitization score is determined as 0.9. The healing efficacy of NFs material on second‐degree burn wounds compared to a commercial product is supported by pathomorphological findings.
- 18 August 2024
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 309 (12)
Open AccessEvaluation of Burn Wound Healing Efficacy and Biocompatibility of Centella asiatica Mediated Synthesised AgNPs Loaded Hybrid Nanofiber Scaffold: In Vitro and In Vivo Studies
The aim of this study is to evaluate the cell responses, potential skin reactions during the treatment process and burn wound healing efficacy of electrospun polycaprolactone/polyethylene oxide (PCL/PEO) nanofibers (NFs) containing Centella asiatica mediated synthesized silver nanoparticles (CA‐AgNPs) by in vitro and in vivo studies. Apoptosis‐necrosis, genotoxicity, hemolysis, and cell attachment studies are carried out within the scope of in vitro tests, and irritation, sensitivity, and burn wound studies are carried out within the scope of in vivo tests. The apoptotic index value of CA‐AgNPs‐[PCL/PEO] NFs material on L929 fibroblast cells is determined as 5.0 ± 1.0% at the highest concentration and the necrotic index value is 5.0 ± 0.3%. Micronucleus rates (%) of NFs treated with CHO (Chinese Hamster Ovary) cells are not at genotoxic level. The hemolytic index value of NFs dressing is determined as 0.23 ± 0.03%, The primary irritation index (PII) value of NFs wound dressing is calculated as 0.36 by irritation tests. In addition, the potential sensitization reaction of NFs extract on guinea pigs is evaluated and the sensitization score is determined as 0.9. The healing efficacy of NFs material on second‐degree burn wounds compared to a commercial product is supported by pathomorphological findings.
- 18 May 2024
- Published by Uluslararasi Muhendislik Arastirma ve Gelistirme Dergisi in Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi
- Vol. 16 (2) , 778-791
Poly(hexamethylene biguanide) immobilized non-absorbable and antimicrobial PET fiber for surgical suture applications: synthesis, characterization and in vitro cytocompatibility assessment
Surgical sutures are widely utilized medical devices for the purpose of closing wounds after surgical interventions. During surgical procedures, sutures can come into contact with microorganisms in the surrounding environment, leading to the development of bacterial biofilms and subsequent surgical site infections (SSI). Therefore, the use of sutures that prevent bacterial attachment and colonization is very important in wound healing. Antimicrobial sutures coated with antiseptics such as triclosan and chlorhexidine have been used to minimize SSI formation. However, due to the emergence of bacterial strains resistant to various antiseptics and antibiotics, new approaches to the development of alternative antimicrobial sutures are required. Among antimicrobial agents, polyhexanide (polyhexamethylene biguanide, PHMB) is a cationic antiseptic with broad spectrum antibacterial and antifungal activity, low toxicity and biocompatible. The aim of this study was to synthesize PHMB immobilized polyethylene terephthalate (PET) fibers for use as surgical suture threads. The synthesized modified PET fibers were characterized by SEM, FTIR, DSC and TGA. In addition, the wettability and in vitro degradation profile of the modified PET fibers were investigated. S. aureus and E. coli bacterial strains were used for antimicrobial activity tests. In vitro cytocompatibility (cytotoxicity) of the materials was evaluated by MTT test according to TS EN ISO 10993-5 standard.
- 18 May 2024
- Published by Uluslararasi Muhendislik Arastirma ve Gelistirme Dergisi in Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi
- Vol. 16 (2) , 778-791
Poly(hexamethylene biguanide) immobilized non-absorbable and antimicrobial PET fiber for surgical suture applications: synthesis, characterization and in vitro cytocompatibility assessment
Surgical sutures are widely utilized medical devices for the purpose of closing wounds after surgical interventions. During surgical procedures, sutures can come into contact with microorganisms in the surrounding environment, leading to the development of bacterial biofilms and subsequent surgical site infections (SSI). Therefore, the use of sutures that prevent bacterial attachment and colonization is very important in wound healing. Antimicrobial sutures coated with antiseptics such as triclosan and chlorhexidine have been used to minimize SSI formation. However, due to the emergence of bacterial strains resistant to various antiseptics and antibiotics, new approaches to the development of alternative antimicrobial sutures are required. Among antimicrobial agents, polyhexanide (polyhexamethylene biguanide, PHMB) is a cationic antiseptic with broad spectrum antibacterial and antifungal activity, low toxicity and biocompatible. The aim of this study was to synthesize PHMB immobilized polyethylene terephthalate (PET) fibers for use as surgical suture threads. The synthesized modified PET fibers were characterized by SEM, FTIR, DSC and TGA. In addition, the wettability and in vitro degradation profile of the modified PET fibers were investigated. S. aureus and E. coli bacterial strains were used for antimicrobial activity tests. In vitro cytocompatibility (cytotoxicity) of the materials was evaluated by MTT test according to TS EN ISO 10993-5 standard.
- Open Access
- 26 February 2024
- Published by Springer Nature in Journal of Food Science and Technology
- Vol. 61 (9) , 1711-1721
Physico-chemical characterization of food grade natural spring salt from the Central Anatolia region of Turkey and investigation of its microplastic content
Delice salt is a natural spring salt obtained from the evaporation of spring water from the Central Anatolia region of Turkey and is a food grade salt with a geographical indication certificate. The aim of this study was to evaluate the compliance of Delice natural spring salt (Delice NSS), a commercial product, with food grade criteria by physicochemical characterizations and to investigate whether it contains microplastics. The NaCl%, moisture suspended solids and acid insoluble matter contents of Delice NSS were analyzed and determined as 98.79% (w/w), 0.301% (w/w), 0.16% (w/w) and 0.01% (w/w), respectively. Sodium, other minerals, and heavy metals were analyzed by inductively coupled plasma-optical emission (ICP-OES) spectrometry. In addition, fluoride, nitrate, and sulphate ions were analyzed by ion chromatography (IC). The chemical and thermal properties of Delice NSS were characterized by FTIR, X-ray fluorescence (XRF) and thermogravimetric analyzer (TGA). Moreover, Delice NSS was investigated whether it contains microplastics and some particles were detected under fluorescence microscopy. However, it was concluded that particles were not microplastics after TGA and FTIR analyses. The results revealed that Delice NSS does not carry a risk in terms of physicochemical properties as a foodstuff.
- 26 February 2024
- Published by Springer Nature in Journal of Food Science and Technology
- Vol. 61 (9) , 1711-1721
Open AccessPhysico-chemical characterization of food grade natural spring salt from the Central Anatolia region of Turkey and investigation of its microplastic content
Delice salt is a natural spring salt obtained from the evaporation of spring water from the Central Anatolia region of Turkey and is a food grade salt with a geographical indication certificate. The aim of this study was to evaluate the compliance of Delice natural spring salt (Delice NSS), a commercial product, with food grade criteria by physicochemical characterizations and to investigate whether it contains microplastics. The NaCl%, moisture suspended solids and acid insoluble matter contents of Delice NSS were analyzed and determined as 98.79% (w/w), 0.301% (w/w), 0.16% (w/w) and 0.01% (w/w), respectively. Sodium, other minerals, and heavy metals were analyzed by inductively coupled plasma-optical emission (ICP-OES) spectrometry. In addition, fluoride, nitrate, and sulphate ions were analyzed by ion chromatography (IC). The chemical and thermal properties of Delice NSS were characterized by FTIR, X-ray fluorescence (XRF) and thermogravimetric analyzer (TGA). Moreover, Delice NSS was investigated whether it contains microplastics and some particles were detected under fluorescence microscopy. However, it was concluded that particles were not microplastics after TGA and FTIR analyses. The results revealed that Delice NSS does not carry a risk in terms of physicochemical properties as a foodstuff.
- 28 July 2023
- Published by Springer Nature in Fibers and Polymers
- Vol. 24 (9) , 3115-3127
Anti-infective Knitted Surgical Mesh for Stress Urinary Incontinence Applications: Synthesis, Characterization, and Investigation of Its In Vitro Biocompatibility
- 28 July 2023
- Published by Springer Nature in Fibers and Polymers
- Vol. 24 (9) , 3115-3127
Anti-infective Knitted Surgical Mesh for Stress Urinary Incontinence Applications: Synthesis, Characterization, and Investigation of Its In Vitro Biocompatibility
- Open Access
- 31 May 2023
- Published by Kocaeli Journal of Science and Engineering in Kocaeli Journal of Science and Engineering
- Vol. 6 (1) , 51-60
Chemical Characterization of Ultra High Molecular Weight Polyethylene Based Tibial Inserts After Ethylene Oxide Sterilization
Ultra-high molecular weight polyethylene (UHMWPE) has become the gold standard for total joint replacements such as tibial inserts because of its chemical inertness, superior mechanical properties, and biocompatibility. Ethylene oxide sterilization is one of the most common and effective methods used, especially for the sterilization of polyethylene-based polymeric implants. However, variable sterilization conditions can cause a change in the chemical structure of the polymeric material, which affects its mechanical properties and lifetime. The aim of this study is to investigate whether the chemical structure of UHMWPE tibial inserts sterilized with ethylene oxide undergoing certain conditions remains the same. Chemical characterization studies were performed with Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffractometer, differential scanning calorimetry, thermogravimetric analysis, mass spectrometry and elemental analysis techniques recommended for polymeric materials in ISO 10993-8:2020 standard. According to the FTIR results, the spectra of the non-sterile and sterile tibial inserts were compared, and it was determined that the similarity between them was 99.97%. XRD results revealed that after ethylene oxide sterilization, there was no significant shift in the Bragg (1 0 0) peak. The percentages of crystallinity calculated from the fusion enthalpies determined by DSC of sterile and non-sterile samples are 54.3% and 53.3%, respectively. Characterization results revealed that there was no significant change in molecular structure, crystallinity, elemental composition of UHMWPE materials after ethylene oxide sterilization. These results can provide assurance that tibial inserts keep their physical, chemical, and mechanical properties after sterilization.
- 31 May 2023
- Published by Kocaeli Journal of Science and Engineering in Kocaeli Journal of Science and Engineering
- Vol. 6 (1) , 51-60
Open AccessChemical Characterization of Ultra High Molecular Weight Polyethylene Based Tibial Inserts After Ethylene Oxide Sterilization
Ultra-high molecular weight polyethylene (UHMWPE) has become the gold standard for total joint replacements such as tibial inserts because of its chemical inertness, superior mechanical properties, and biocompatibility. Ethylene oxide sterilization is one of the most common and effective methods used, especially for the sterilization of polyethylene-based polymeric implants. However, variable sterilization conditions can cause a change in the chemical structure of the polymeric material, which affects its mechanical properties and lifetime. The aim of this study is to investigate whether the chemical structure of UHMWPE tibial inserts sterilized with ethylene oxide undergoing certain conditions remains the same. Chemical characterization studies were performed with Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffractometer, differential scanning calorimetry, thermogravimetric analysis, mass spectrometry and elemental analysis techniques recommended for polymeric materials in ISO 10993-8:2020 standard. According to the FTIR results, the spectra of the non-sterile and sterile tibial inserts were compared, and it was determined that the similarity between them was 99.97%. XRD results revealed that after ethylene oxide sterilization, there was no significant shift in the Bragg (1 0 0) peak. The percentages of crystallinity calculated from the fusion enthalpies determined by DSC of sterile and non-sterile samples are 54.3% and 53.3%, respectively. Characterization results revealed that there was no significant change in molecular structure, crystallinity, elemental composition of UHMWPE materials after ethylene oxide sterilization. These results can provide assurance that tibial inserts keep their physical, chemical, and mechanical properties after sterilization.
- 12 April 2023
- Published by Springer Nature in Fibers and Polymers
- Vol. 24 (5) , 1623-1632
Novel Electrospun Cotton-Like Nano/Microfiber from Waste Polycarbonate Plastic for Use as Filler Fiber in Outerwear Textiles
- 12 April 2023
- Published by Springer Nature in Fibers and Polymers
- Vol. 24 (5) , 1623-1632
Novel Electrospun Cotton-Like Nano/Microfiber from Waste Polycarbonate Plastic for Use as Filler Fiber in Outerwear Textiles
- Open Access
- 31 January 2023
- Published by Uluslararasi Muhendislik Arastirma ve Gelistirme Dergisi in Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi
- Vol. 15 (1) , 139-150
Etilen Oksit Sterilizasyonunun PEEK Bazlı Dental İmplantın Kimyasal Yapısı Üzerine Etkisi
Polietereterketon (PEEK), kemik ve kıkırdak replasmanı için uygun mekanik özelliklere sahip biyouyumlu bir polimerdir. Bu nedenle titanyum bazlı metallere alternatif olarak tıpta ve diş hekimliğinde birçok potaniyel kullanıma sahiptir. Tıbbi cihaz yönetmeliğine göre implante edilebilir cihazlar yüksek risk sınıfında olması nedeniyle yıkama, dezenfeksiyon ve sterilizasyon süreçlerinden geçirilirler. Etilen oksit (EtO) sterilizasyonu özellikle PEEK bazlı polimerik implantların sterilizasyonu için kullanılan en yaygın ve etkili yöntemlerden biridir. Bununla birlikte, değişken sterilizasyon koşulları, polimerik malzemenin kimyasal yapısında, mekanik özelliklerini ve ömrünü etkileyen birtakım değişikliklere neden olabilir. Bu çalışmanın amacı, belirli koşullar altında EtO ile sterilize edilen PEEK bazlı dental implantların kimyasal yapısının değişip değişmediğini araştırmaktır. Kimyasal karakterizasyon çalışmaları ISO 10993-18:2020 standardında polimerik malzemeler için önerilen fourier transform kızılötesi spektroskopisi (FT-IR), diferansiyel taramalı kalorimetri (DSC), termogravimetrik analiz (TGA), CHNS elementel analiz ve gaz kromatografi-kütle spektrometrisi (GC-MS) teknikleri kullanılarak yürütülmüştür. Karakterizasyon sonuçları, etilen oksit sterilizasyonundan sonra PEEK materyalin moleküler yapısında, kristalinitesinde ve elementel bileşiminde önemli bir değişiklik olmadığını ortaya koymuştur.
- 31 January 2023
- Published by Uluslararasi Muhendislik Arastirma ve Gelistirme Dergisi in Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi
- Vol. 15 (1) , 139-150
Open AccessEtilen Oksit Sterilizasyonunun PEEK Bazlı Dental İmplantın Kimyasal Yapısı Üzerine Etkisi
Polietereterketon (PEEK), kemik ve kıkırdak replasmanı için uygun mekanik özelliklere sahip biyouyumlu bir polimerdir. Bu nedenle titanyum bazlı metallere alternatif olarak tıpta ve diş hekimliğinde birçok potaniyel kullanıma sahiptir. Tıbbi cihaz yönetmeliğine göre implante edilebilir cihazlar yüksek risk sınıfında olması nedeniyle yıkama, dezenfeksiyon ve sterilizasyon süreçlerinden geçirilirler. Etilen oksit (EtO) sterilizasyonu özellikle PEEK bazlı polimerik implantların sterilizasyonu için kullanılan en yaygın ve etkili yöntemlerden biridir. Bununla birlikte, değişken sterilizasyon koşulları, polimerik malzemenin kimyasal yapısında, mekanik özelliklerini ve ömrünü etkileyen birtakım değişikliklere neden olabilir. Bu çalışmanın amacı, belirli koşullar altında EtO ile sterilize edilen PEEK bazlı dental implantların kimyasal yapısının değişip değişmediğini araştırmaktır. Kimyasal karakterizasyon çalışmaları ISO 10993-18:2020 standardında polimerik malzemeler için önerilen fourier transform kızılötesi spektroskopisi (FT-IR), diferansiyel taramalı kalorimetri (DSC), termogravimetrik analiz (TGA), CHNS elementel analiz ve gaz kromatografi-kütle spektrometrisi (GC-MS) teknikleri kullanılarak yürütülmüştür. Karakterizasyon sonuçları, etilen oksit sterilizasyonundan sonra PEEK materyalin moleküler yapısında, kristalinitesinde ve elementel bileşiminde önemli bir değişiklik olmadığını ortaya koymuştur.
- 30 December 2022
- Published by Veterinary Journal of Ankara University in Ankara Üniversitesi Veteriner Fakültesi Dergisi
- Vol. 70 (1) , 87-96
Investigation of the in vitro antibacterial, cytotoxic and in vivo analgesic effects of silver nanoparticles coated with Centella asiatica plant extract
In the present study, functional silver nanoparticles (AgNPs) were synthesized from silver ions using the therapeutic plant extracts of Centella asiatica (CA). CA functional groups coated AgNPs (CA-AgNPs) formation was proved by characteristic surface plasmon resonance (SPR) peaks at around 420 nm wavelength. The mean zeta size and zeta potential of CA-AgNPs were found to be 29.5 nm and -24.5 mV, respectively. It was determined that the obtained nanoparticles had a negative surface charge and the results showed that the CA-AgNPs were stable. The functional groups analysis of the CA-AgNPs was investigated by a fourier transform infrared spectroscopy (FTIR). With antibacterial test, it was determined that the obtained nanoparticles have antibacterial activity on both gram-positive Staphylococcus aureus and gram-negative Escherichia coli. The cytotoxicity effects of CA and CA-AgNPs in different concentrations on L929 fibroblast were investigated with the MTT test, and it was determined that CA-AgNPs had a cytotoxic effect at concentrations above 1 mM. In addition, the analgesic effects of CA-AgNPs were investigated with tail flick and hot plate methods for the first time in the literature by tail flick and hot plate methods, and statistically significant results were obtained with both methods. These results showed that CA-AgNPs at certain concentrations are suitable nanoscale biomaterials for many biomedical applications.
- 30 December 2022
- Published by Veterinary Journal of Ankara University in Ankara Üniversitesi Veteriner Fakültesi Dergisi
- Vol. 70 (1) , 87-96
Investigation of the in vitro antibacterial, cytotoxic and in vivo analgesic effects of silver nanoparticles coated with Centella asiatica plant extract
In the present study, functional silver nanoparticles (AgNPs) were synthesized from silver ions using the therapeutic plant extracts of Centella asiatica (CA). CA functional groups coated AgNPs (CA-AgNPs) formation was proved by characteristic surface plasmon resonance (SPR) peaks at around 420 nm wavelength. The mean zeta size and zeta potential of CA-AgNPs were found to be 29.5 nm and -24.5 mV, respectively. It was determined that the obtained nanoparticles had a negative surface charge and the results showed that the CA-AgNPs were stable. The functional groups analysis of the CA-AgNPs was investigated by a fourier transform infrared spectroscopy (FTIR). With antibacterial test, it was determined that the obtained nanoparticles have antibacterial activity on both gram-positive Staphylococcus aureus and gram-negative Escherichia coli. The cytotoxicity effects of CA and CA-AgNPs in different concentrations on L929 fibroblast were investigated with the MTT test, and it was determined that CA-AgNPs had a cytotoxic effect at concentrations above 1 mM. In addition, the analgesic effects of CA-AgNPs were investigated with tail flick and hot plate methods for the first time in the literature by tail flick and hot plate methods, and statistically significant results were obtained with both methods. These results showed that CA-AgNPs at certain concentrations are suitable nanoscale biomaterials for many biomedical applications.
- 18 November 2020
- Published by Springer Nature in Polymer Bulletin
- Vol. 78 (12) , 7241-7260
In situ synthesis of silver nanoparticles on modified poly(ethylene terephthalate) fibers by grafting for obtaining versatile antimicrobial materials
- 18 November 2020
- Published by Springer Nature in Polymer Bulletin
- Vol. 78 (12) , 7241-7260
In situ synthesis of silver nanoparticles on modified poly(ethylene terephthalate) fibers by grafting for obtaining versatile antimicrobial materials