Ghaith Al-Hawajreh
Ghaith Al-Hawajreh has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Gonzalo Gonzalez
Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Coyoacan, Mexico
3 shared publications - Liliana Romero-Resendiz
Department of Heterostructured Materials, Interdisciplinary Research Center, Liaoning Academy of Materials, Shenyang, People’s Republic of China
3 shared publications - Vicente Amigo
Universitat Politècnica de València
3 shared publications - Celia González Guillén
Instituto de Tecnología de Materiales, Universitat Politècnica de València, Camino de Vera s/n, 46022 Valencia, Spain
2 shared publications - Eduardo Degalez-Duran
Departamento de Ingeniería Metalúrgica, Facultad de Química, Universidad Nacional Autonoma de Mexico, Mexico City 04510, Mexico
2 shared publications - Elizaveta Klyatskina
Universitat Politècnica de València
2 shared publications
Latest Publications
- 2 January 2026
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 54 (1)
On the dynamic fracture and crack branching of brittle structures considering thermoelastic effects using phase-field method
1. In recent years, the phase-field formulation has emerged as an effective computational framework for modeling fracture in solids. Instead of representing cracks as sharp discontinuities, this me...
- 2 January 2026
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 54 (1)
On the dynamic fracture and crack branching of brittle structures considering thermoelastic effects using phase-field method
1. In recent years, the phase-field formulation has emerged as an effective computational framework for modeling fracture in solids. Instead of representing cracks as sharp discontinuities, this me...
- 27 June 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Applied Mechanics
Finite Deformation Analysis of Membranes Using Physics-Informed Neural Networks
The analysis of large deformations in membrane structures represents a pivotal area of research in contemporary engineering design, with significant implications across diverse fields such as aerospace engineering, architectural design and bioengineering. Conventional numerical methodologies, including the Finite Element Method (FEM), encounter substantial challenges in addressing inherent nonlinearities and achieving computational efficiency, particularly in scenarios involving extreme deformations. This investigation delves into the transformative potential of Physics-Informed Neural Networks (PINNs) as a novel computational paradigm to overcome these limitations. By integrating the fundamental governing equations of membrane mechanics directly into the loss function of the neural network, the proposed framework ensures rigorous adherence to physical principles while harnessing the flexibility and scalability of deep learning architectures. This study underscores the transformative potential of PINNs in advancing the field of computational mechanics and provides a robust methodological foundation for future explorations into the behavior of complex structural systems under nonlinear and large-deformation regimes.
- 27 June 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Applied Mechanics
Finite Deformation Analysis of Membranes Using Physics-Informed Neural Networks
The analysis of large deformations in membrane structures represents a pivotal area of research in contemporary engineering design, with significant implications across diverse fields such as aerospace engineering, architectural design and bioengineering. Conventional numerical methodologies, including the Finite Element Method (FEM), encounter substantial challenges in addressing inherent nonlinearities and achieving computational efficiency, particularly in scenarios involving extreme deformations. This investigation delves into the transformative potential of Physics-Informed Neural Networks (PINNs) as a novel computational paradigm to overcome these limitations. By integrating the fundamental governing equations of membrane mechanics directly into the loss function of the neural network, the proposed framework ensures rigorous adherence to physical principles while harnessing the flexibility and scalability of deep learning architectures. This study underscores the transformative potential of PINNs in advancing the field of computational mechanics and provides a robust methodological foundation for future explorations into the behavior of complex structural systems under nonlinear and large-deformation regimes.
- Open Access
The Effect of Ti/Ta Ratio and Processing Routes on the Hardness and Elastic Modulus of Porous TiNbZrTa Alloys
TiNbZrTa alloys are promising for multidisciplinary applications, such as refractory and biomedical purposes, due to their high thermal stability and non-toxicity. Hardness and elastic modulus are among the key features for their adequate industrial applications. The influence of porosity and Ti/Ta ratio were investigated on TiNbZrTa alloys produced by three different processing routes, i.e., (i) blend element and posterior press and sintering (BE + P&S); (ii) mechanical alloying with press and sintering (MA + P&S); and (iii) arc melting and casting. Porosity decreased in the following order: casting < MA + P&S < BE + P&S. The total porosity of alloys increased with increasing Ta contents, i.e., by lowering the Ti/Ta ratio. However, the Ti/Ta ratio did not considerably affect the bonding energy or the elastic modulus. Hardness was increased significantly in dense alloys compared to porous ones. However, porosity and Ti/Ta ratio did not show a clear trend in hardness among the porous alloys.
Open AccessThe Effect of Ti/Ta Ratio and Processing Routes on the Hardness and Elastic Modulus of Porous TiNbZrTa Alloys
TiNbZrTa alloys are promising for multidisciplinary applications, such as refractory and biomedical purposes, due to their high thermal stability and non-toxicity. Hardness and elastic modulus are among the key features for their adequate industrial applications. The influence of porosity and Ti/Ta ratio were investigated on TiNbZrTa alloys produced by three different processing routes, i.e., (i) blend element and posterior press and sintering (BE + P&S); (ii) mechanical alloying with press and sintering (MA + P&S); and (iii) arc melting and casting. Porosity decreased in the following order: casting < MA + P&S < BE + P&S. The total porosity of alloys increased with increasing Ta contents, i.e., by lowering the Ti/Ta ratio. However, the Ti/Ta ratio did not considerably affect the bonding energy or the elastic modulus. Hardness was increased significantly in dense alloys compared to porous ones. However, porosity and Ti/Ta ratio did not show a clear trend in hardness among the porous alloys.
- Open Access
- 26 October 2023
- Published by MDPI AG in Preprints.org
Effect of porosity, Ti/Ta ratio, and processing routes on the hardness and elastic modulus of TiNbZrTa alloys
TiNbZrTa alloys are promising for multidisciplinary applications, such as refractory and biomedical purposes due to their high thermal stability and non-toxicity. Hardness and elastic modulus are among the key features for their adequate industrial applications. The influence of porosity and Ti/Ta ratio were investigated on TiNbZrTa alloys produced by three different processing routes, i.e., (i) blend element and posterior press and sintering (BE + P&S), (ii) mechanical alloying with press and sintering (MA + P&S), and (iii) arc melting and casting. Atomic diffusion was improved during processing, resulting in lower porosity in the following order: casting < MA + P&S < BE + P&S. Ta offered limited atomic diffusion due to its high melting point compared to other constituent elements. Thus, the total porosity of alloys increased with increasing the Ta contents, i.e., by lowering the Ti/Ta ratio. However, the Ti/Ta ratio did not considerably affect the bonding energy or the elastic modulus. Hardness was increased significantly in dense alloys compared to the porous ones. However, porosity and Ti/Ta ratio did not show a clear trend in hardness among the porous alloys.
- 26 October 2023
- Published by MDPI AG in Preprints.org
Open AccessEffect of porosity, Ti/Ta ratio, and processing routes on the hardness and elastic modulus of TiNbZrTa alloys
TiNbZrTa alloys are promising for multidisciplinary applications, such as refractory and biomedical purposes due to their high thermal stability and non-toxicity. Hardness and elastic modulus are among the key features for their adequate industrial applications. The influence of porosity and Ti/Ta ratio were investigated on TiNbZrTa alloys produced by three different processing routes, i.e., (i) blend element and posterior press and sintering (BE + P&S), (ii) mechanical alloying with press and sintering (MA + P&S), and (iii) arc melting and casting. Atomic diffusion was improved during processing, resulting in lower porosity in the following order: casting < MA + P&S < BE + P&S. Ta offered limited atomic diffusion due to its high melting point compared to other constituent elements. Thus, the total porosity of alloys increased with increasing the Ta contents, i.e., by lowering the Ti/Ta ratio. However, the Ti/Ta ratio did not considerably affect the bonding energy or the elastic modulus. Hardness was increased significantly in dense alloys compared to the porous ones. However, porosity and Ti/Ta ratio did not show a clear trend in hardness among the porous alloys.
- Open Access
- 12 April 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 24, 4364-4378
Effect of the Ti/Ta ratio on the feasibility of porous Ti25+x-Nb25-Zr25-Ta25-x (X= 0, 5, and 10) alloys for biomedical applications
- 12 April 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 24, 4364-4378
Open AccessEffect of the Ti/Ta ratio on the feasibility of porous Ti25+x-Nb25-Zr25-Ta25-x (X= 0, 5, and 10) alloys for biomedical applications