Fangqin Guo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fangqin Guo has a total of 88 co-authors. Here are the top co-authors by number of shared publications:
Takayuki Ichikawa
Graduate School of Advanced Science and Engineering Hiroshima University Hiroshima Japan
9 shared publications- Takayuki Ichikawa
Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi-Hiroshima 739-8527, Japan
8 shared publications - Ankur Jain
Centre for Renewable Energy & Storage Suresh Gyan Vihar University Jaipur India
7 shared publications Hiroki Miyaoka
7 shared publications- Hiroki Miyaoka
Natural Science Center for Basic Research & Development, Hiroshima University, 1-3-1 Kagamiyama, Higashi-Hiroshima 739-8530, Japan
5 shared publications - Zhiwen Chen3 shared publications
Latest Publications
- Open Access
High‐Performance All‐Solid‐State Silicon–Sulfur Batteries Enabled by Li 4 (BH 4 ) 3 I Hydride Electrolyte
Silicon anodes hold great potential for next‐generation battery systems due to their significantly higher capacity compared with conventional graphite anodes. However, the low electrochemical potential of lithiated phases in lithium–silicon alloys drives spontaneous electrolyte reduction, resulting in interfacial instability. Herein, a high‐performance silicon composite anode assembled with a Li 4 (BH 4 ) 3 I hydride electrolyte is developed. Prelithiation compensates for initial irreversible lithium consumption, while the combination of the Li 22 Si 5 alloy and hydride electrolyte suppresses interfacial degradation, enabling an initial Coulombic efficiency of 99.6%. In silicon–sulfur full cells, the opposite volume changes of the Li 22 Si 5 anode and sulfur cathode dynamically compensate for stress evolution during cycling and maintain intimate interfacial contact and structural integrity, enabling this configuration to deliver an ultra‐high areal capacity of 23.88 mAh cm −2 and retain 63.2% of its capacity after 1000 cycles, without observable cracking or structural degradation. These results provide an effective interfacial and structural design strategy for high‐performance silicon‐based anodes in all‐solid‐state batteries.
Open AccessHigh‐Performance All‐Solid‐State Silicon–Sulfur Batteries Enabled by Li 4 (BH 4 ) 3 I Hydride Electrolyte
Silicon anodes hold great potential for next‐generation battery systems due to their significantly higher capacity compared with conventional graphite anodes. However, the low electrochemical potential of lithiated phases in lithium–silicon alloys drives spontaneous electrolyte reduction, resulting in interfacial instability. Herein, a high‐performance silicon composite anode assembled with a Li 4 (BH 4 ) 3 I hydride electrolyte is developed. Prelithiation compensates for initial irreversible lithium consumption, while the combination of the Li 22 Si 5 alloy and hydride electrolyte suppresses interfacial degradation, enabling an initial Coulombic efficiency of 99.6%. In silicon–sulfur full cells, the opposite volume changes of the Li 22 Si 5 anode and sulfur cathode dynamically compensate for stress evolution during cycling and maintain intimate interfacial contact and structural integrity, enabling this configuration to deliver an ultra‐high areal capacity of 23.88 mAh cm −2 and retain 63.2% of its capacity after 1000 cycles, without observable cracking or structural degradation. These results provide an effective interfacial and structural design strategy for high‐performance silicon‐based anodes in all‐solid‐state batteries.
- 22 April 2026
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 45 (5)
Development of eco‐friendly adsorbent from peanut shell biochar for the textile wastewater remediation
Malachite Green (MG) is a cationic triphenylmethane dye which is widely used in the textile and aquaculture industries. It is recognized as a persistent and hazardous organic pollutant due to its carcinogenic, genotoxic, and ecotoxic characteristics. Present investigation targets the development of sustainable adsorbent from the waste peanut ( Arachis hypogaea ) shells by using microwave‐assisted pyrolysis method and alkali‐induced activation to enhance surface properties. This synthesized alkali‐activated peanut shell biochar was systematically characterized using XRD, SEM EDX, FTIR, and batch adsorption experiments were performed to investigate the removal of MG from aqueous solution, examining the influence of pH, contact time, temperature, and adsorbent dosage. Adsorption capacity for peanut shell biochar is 28.34 mg of dye per gram of biochar and for alkali activated peanut shell biochar is 63.24 mg of dye per gram of biochar. Adsorption mechanism involves best fit for Freundlich isotherm indicating heterogeneous surface with varying adsorption sites, with second order kinetics. It is a spontaneous endothermic process involving weak Vander Waal's and pi‐pi interactions as prevalent processes of adsorption. The findings confirm that alkali activation significantly improves porosity, surface functionality, and adsorption capacity. PSB and NaOH PSB treatment significantly reduced turbidity (51%), TSS (36%), Oil and Grease (59%), BOD and COD. Nearly 35% reduction in the Water Quality Index (WQI) was observed after the biochar treatment rendering water quality suitable for washing and other purposes.
- 22 April 2026
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 45 (5)
Development of eco‐friendly adsorbent from peanut shell biochar for the textile wastewater remediation
Malachite Green (MG) is a cationic triphenylmethane dye which is widely used in the textile and aquaculture industries. It is recognized as a persistent and hazardous organic pollutant due to its carcinogenic, genotoxic, and ecotoxic characteristics. Present investigation targets the development of sustainable adsorbent from the waste peanut ( Arachis hypogaea ) shells by using microwave‐assisted pyrolysis method and alkali‐induced activation to enhance surface properties. This synthesized alkali‐activated peanut shell biochar was systematically characterized using XRD, SEM EDX, FTIR, and batch adsorption experiments were performed to investigate the removal of MG from aqueous solution, examining the influence of pH, contact time, temperature, and adsorbent dosage. Adsorption capacity for peanut shell biochar is 28.34 mg of dye per gram of biochar and for alkali activated peanut shell biochar is 63.24 mg of dye per gram of biochar. Adsorption mechanism involves best fit for Freundlich isotherm indicating heterogeneous surface with varying adsorption sites, with second order kinetics. It is a spontaneous endothermic process involving weak Vander Waal's and pi‐pi interactions as prevalent processes of adsorption. The findings confirm that alkali activation significantly improves porosity, surface functionality, and adsorption capacity. PSB and NaOH PSB treatment significantly reduced turbidity (51%), TSS (36%), Oil and Grease (59%), BOD and COD. Nearly 35% reduction in the Water Quality Index (WQI) was observed after the biochar treatment rendering water quality suitable for washing and other purposes.
- Open Access
- 31 March 2026
- Published by Royal Society of Chemistry (RSC) in EES Catalysis
- Vol. 4 (4) , 899-908
Mechanism study on hydrogen generation from metal hydride-coupled methanol steam reforming
Synergistic coupling of CaH 2 hydrolysis and methanol steam reforming enables efficient hydrogen production via in situ heat and an alkaline environment, suppressing COx formation.
- 31 March 2026
- Published by Royal Society of Chemistry (RSC) in EES Catalysis
- Vol. 4 (4) , 899-908
Open AccessMechanism study on hydrogen generation from metal hydride-coupled methanol steam reforming
Synergistic coupling of CaH 2 hydrolysis and methanol steam reforming enables efficient hydrogen production via in situ heat and an alkaline environment, suppressing COx formation.
- 14 February 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1057
Durability on hydrogen absorption properties of TiFe0.7Mn0.3 with surface modification by TiO2
- 14 February 2026
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 1057
Durability on hydrogen absorption properties of TiFe0.7Mn0.3 with surface modification by TiO2
- 30 January 2026
- Published by Wiley in Energy Storage
- Vol. 8 (1)
Electrochemical Reaction of LiCoO 2 Cathode With Optimized LiBH 4 – MgO Electrolyte in All‐Solid‐State Lithium‐Ion Batteries
In this study, MgO was incorporated into the extensively studied solid electrolyte material, lithium borohydride (LiBH 4 ), to enhance its poor ionic conductivity at ambient temperature. The addition of MgO was proved to significantly improve its ionic conductivity by approximately four orders of magnitude at 30°C compared to the low‐temperature phase (less than 115°C) of pristine LiBH 4 . Based on this electrolyte, all‐solid‐state batteries employing LiCoO 2 as the cathode and MgO‐modified LiBH 4 as the electrolyte were successfully fabricated and operated in the low‐temperature range. Moreover, the initial charging process exhibited anomalous electrochemical behavior, delivering a remarkably high specific capacity of 285.2 mAh/g with an unconventional charge plateau at 1.6 V, which deviates substantially from the typical electrochemical characteristics of LiCoO 2 . To understand the charging mechanism from thermochemical and electrochemical views, a series of mechanistic characterizations was performed on the battery. Thermogravimetric analysis revealed a small amount of hydrogen evolution (≤ 0.2 wt%) at phase transition temperatures, while solid‐state NMR spectroscopy confirmed the formation of BO bonds, providing evidence for redox reactions involving LiBH 4 . However, comparative electrochemical experiments and X‐ray diffraction (XRD) analysis excluded the influence of the thermal decomposition of LiBH 4 during the charging process. The charging mechanism that controlled the electrochemical behavior of this system was clarified in a detailed discussion.
- 30 January 2026
- Published by Wiley in Energy Storage
- Vol. 8 (1)
Electrochemical Reaction of LiCoO 2 Cathode With Optimized LiBH 4 – MgO Electrolyte in All‐Solid‐State Lithium‐Ion Batteries
In this study, MgO was incorporated into the extensively studied solid electrolyte material, lithium borohydride (LiBH 4 ), to enhance its poor ionic conductivity at ambient temperature. The addition of MgO was proved to significantly improve its ionic conductivity by approximately four orders of magnitude at 30°C compared to the low‐temperature phase (less than 115°C) of pristine LiBH 4 . Based on this electrolyte, all‐solid‐state batteries employing LiCoO 2 as the cathode and MgO‐modified LiBH 4 as the electrolyte were successfully fabricated and operated in the low‐temperature range. Moreover, the initial charging process exhibited anomalous electrochemical behavior, delivering a remarkably high specific capacity of 285.2 mAh/g with an unconventional charge plateau at 1.6 V, which deviates substantially from the typical electrochemical characteristics of LiCoO 2 . To understand the charging mechanism from thermochemical and electrochemical views, a series of mechanistic characterizations was performed on the battery. Thermogravimetric analysis revealed a small amount of hydrogen evolution (≤ 0.2 wt%) at phase transition temperatures, while solid‐state NMR spectroscopy confirmed the formation of BO bonds, providing evidence for redox reactions involving LiBH 4 . However, comparative electrochemical experiments and X‐ray diffraction (XRD) analysis excluded the influence of the thermal decomposition of LiBH 4 during the charging process. The charging mechanism that controlled the electrochemical behavior of this system was clarified in a detailed discussion.
- 18 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (10) , 5925-5934
Thermodynamic and spectroscopic analysis of the ammonia absorption mechanism of a borohydride system
Borohydrides are promising ammonia (NH 3 ) storage materials for controlling the storage pressure of NH 3 , where the reaction mechanism between borohydrides and NH 3 is key to designing suitable properties to meet demands.
- 18 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (10) , 5925-5934
Thermodynamic and spectroscopic analysis of the ammonia absorption mechanism of a borohydride system
Borohydrides are promising ammonia (NH 3 ) storage materials for controlling the storage pressure of NH 3 , where the reaction mechanism between borohydrides and NH 3 is key to designing suitable properties to meet demands.
- 22 May 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 343
Tuning the thermodynamics and kinetics of magnesium-based materials for hydrogen energy storage: a review
- 22 May 2025
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 343
Tuning the thermodynamics and kinetics of magnesium-based materials for hydrogen energy storage: a review
- 8 January 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 102, 29-36
Hydrogen generation from coupled methanol steam reforming with metal hydride hydrolysis: Effects of metal catalysts and hydrides
- 8 January 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 102, 29-36
Hydrogen generation from coupled methanol steam reforming with metal hydride hydrolysis: Effects of metal catalysts and hydrides
- Open Access
- 12 September 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (40) , 29201-29214
Evaluation of optimized conditions for the adsorption of malachite green by SnO2-modified sugarcane bagasse biochar nanocomposites
Study of synthetic route and evaluation of kinetic and thermodynamic parameters of SnO2-SBB nanocomposites.
- 12 September 2024
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 14 (40) , 29201-29214
Open AccessEvaluation of optimized conditions for the adsorption of malachite green by SnO2-modified sugarcane bagasse biochar nanocomposites
Study of synthetic route and evaluation of kinetic and thermodynamic parameters of SnO2-SBB nanocomposites.