Marco Costa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marco Costa has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Sabrina Di Masi
CNR NANOTEC—Institute of Nanotechnology, Via Monteroni, 73100 Lecce, Italy
7 shared publications - Cosimino Malitesta
Analytical Chemistry Lab, Department of Biological and Environmental Sciences and Technologies, University of Salento, Lecce, Italy
5 shared publications - Giuseppe Egidio De Benedetto
Laboratory of Analytical and Isotopic Mass Spectrometry, Department of Cultural Heritage, University of Salento, 73100 Lecce, Italy
5 shared publications - Christopher Zaleski
Department of Chemistry, University of Leicester, University Rd., Leicester LE1 7RH, UK
2 shared publications - Nelson Arturo Manrique Rodriguez
Laboratory of Analytical Chemistry, Department of Biological and Environmental Sciences and Technologies, University of Salento, Via per Monteroni, 73100 Lecce, Italy
2 shared publications Sergey A. Piletsky
Department of Chemistry, University of Leicester, University Rd, LE1 7RH Leicester, UK
2 shared publications
Latest Publications
- Open Access
- 17 July 2026
- Published by MDPI AG in Sustainable Chemistry
- Vol. 7 (3) , 36
Fabrication of Reusable Platinum Sensing Platform for Green Electrochemical Analysis
This work reports the design and validation of a reusable platinum (Pt) electrode platform (ST-E) for green electrochemical analysis. The device integrates Pt working and counter electrodes with an external Ag/AgCl reference and is engineered for repeated regeneration and refunctionalization. Surface renewal by alumina polishing followed by electrochemical activation in 0.5 M H2SO4 restores a clean, reproducible Pt surface, as confirmed by diffusion-controlled, reversible ferricyanide voltammetry over 5–150 mV s−1 with near-Nernstian peak separation and ipa/ipc ≈ 1. Platform versatility is demonstrated in two applications. First, ST-E is functionalized with PFOA-selective molecularly imprinted nanoparticles on an APTES layer, enabling trace determination of perfluorooctanoic acid (1–5 pg mL−1), with a detection limit of 0.50 pg mL−1 and sensitivity of 3.16 μA (pg mL−1)−1. Responses correlate with an equivalently modified commercial screen-printed electrode (r = 0.990, p < 0.005), with Bland–Altman analysis confirming concordance. Second, after regeneration, electropolymerization of o-phenylenediamine yields an insulating poly(o-phenylenediamine) film that attenuates redox currents and increases ΔEp, illustrating compatibility with diverse surface chemistries. Green metrics (AGREE, AGREEprep ≈ 0.80; BAGI = 75.0) highlight reduced waste and solvent use versus single-use transducers and compatibility with portable potentiostats, supporting circular electrochemical sensing.
- 17 July 2026
- Published by MDPI AG in Sustainable Chemistry
- Vol. 7 (3) , 36
Open AccessFabrication of Reusable Platinum Sensing Platform for Green Electrochemical Analysis
This work reports the design and validation of a reusable platinum (Pt) electrode platform (ST-E) for green electrochemical analysis. The device integrates Pt working and counter electrodes with an external Ag/AgCl reference and is engineered for repeated regeneration and refunctionalization. Surface renewal by alumina polishing followed by electrochemical activation in 0.5 M H2SO4 restores a clean, reproducible Pt surface, as confirmed by diffusion-controlled, reversible ferricyanide voltammetry over 5–150 mV s−1 with near-Nernstian peak separation and ipa/ipc ≈ 1. Platform versatility is demonstrated in two applications. First, ST-E is functionalized with PFOA-selective molecularly imprinted nanoparticles on an APTES layer, enabling trace determination of perfluorooctanoic acid (1–5 pg mL−1), with a detection limit of 0.50 pg mL−1 and sensitivity of 3.16 μA (pg mL−1)−1. Responses correlate with an equivalently modified commercial screen-printed electrode (r = 0.990, p < 0.005), with Bland–Altman analysis confirming concordance. Second, after regeneration, electropolymerization of o-phenylenediamine yields an insulating poly(o-phenylenediamine) film that attenuates redox currents and increases ΔEp, illustrating compatibility with diverse surface chemistries. Green metrics (AGREE, AGREEprep ≈ 0.80; BAGI = 75.0) highlight reduced waste and solvent use versus single-use transducers and compatibility with portable potentiostats, supporting circular electrochemical sensing.
- Open Access
- 10 February 2026
- Published by MDPI AG in Chemosensors
- Vol. 14 (2) , 49
Green Strategies and Decision Tools for Sustainability Assessment of Molecularly Imprinted Polymer Sensors: Review
Integrating environmental sustainability into chemical sensor research is no longer optional and must be addressed at the laboratory scale, where material selection, fabrication strategies, and end-of-life management are defined. Although chemical sensors benefit from miniaturization and disposable architectures, their environmental footprint extends beyond the device geometry to include the electrode substrates, functional coatings and auxiliary materials. In this context, sensors based on molecularly imprinted polymers (MIPs), which are entirely synthetic and artificially engineered materials, pose specific sustainability challenges related to material choice, processing, regeneration and disposal. Addressing these aspects in a systematic and quantitative manner is therefore essential to aligning high analytical performance with sustainable sensor design. This review surveys and critically discusses the strategies currently adopted to improve the environmental sustainability of MIP-based sensors, covering key stages of the MIP sensor lifecycle, including monomer and crosslinker selection, fabrication routes, operational aspects, and end-of-life management. Representative approaches such as the use of bioderived polymerization components, low-impact solvents, cleaner analyte removal methods, and low-energy polymerization techniques are analyzed, highlighting their advantages, limitations, and cost-related trade-offs. To move beyond the qualitative assessment of greenness, sustainability is addressed through Lifecycle Assessment (LCA) and AGREE-based metrics, highlighting the importance of functional units, use phase inventories, and regeneration strategies in reducing overall environmental impacts. The review concludes by proposing actionable guidelines to support the transition of MIP-based sensors from sustainable laboratory fabrication to real-world environmental monitoring applications.
- 10 February 2026
- Published by MDPI AG in Chemosensors
- Vol. 14 (2) , 49
Open AccessGreen Strategies and Decision Tools for Sustainability Assessment of Molecularly Imprinted Polymer Sensors: Review
Integrating environmental sustainability into chemical sensor research is no longer optional and must be addressed at the laboratory scale, where material selection, fabrication strategies, and end-of-life management are defined. Although chemical sensors benefit from miniaturization and disposable architectures, their environmental footprint extends beyond the device geometry to include the electrode substrates, functional coatings and auxiliary materials. In this context, sensors based on molecularly imprinted polymers (MIPs), which are entirely synthetic and artificially engineered materials, pose specific sustainability challenges related to material choice, processing, regeneration and disposal. Addressing these aspects in a systematic and quantitative manner is therefore essential to aligning high analytical performance with sustainable sensor design. This review surveys and critically discusses the strategies currently adopted to improve the environmental sustainability of MIP-based sensors, covering key stages of the MIP sensor lifecycle, including monomer and crosslinker selection, fabrication routes, operational aspects, and end-of-life management. Representative approaches such as the use of bioderived polymerization components, low-impact solvents, cleaner analyte removal methods, and low-energy polymerization techniques are analyzed, highlighting their advantages, limitations, and cost-related trade-offs. To move beyond the qualitative assessment of greenness, sustainability is addressed through Lifecycle Assessment (LCA) and AGREE-based metrics, highlighting the importance of functional units, use phase inventories, and regeneration strategies in reducing overall environmental impacts. The review concludes by proposing actionable guidelines to support the transition of MIP-based sensors from sustainable laboratory fabrication to real-world environmental monitoring applications.
- 21 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-12
A Comprehensive Hardware Platform Leveraging Impedimetric nanoMIP Sensors for Fast Evaluation of Trypsin in Artificial Saliva
Pancreatic cancer is a leading cause of deaths world-wide, primarily due to late-stage diagnoses and limited treatment options. With the aim of introducing new screening strategies, research has intensified around trypsin, a promising biomarker exhibiting altered expression in pancreatic cancer patients. Conventional trypsin detection methods in biofluids show problems related to the need of trained personnel, bulky instrumentation, and high measurement time. The latter should be a key feature to accelerate the training of robust regression models with large datasets, gain prompt predictions in clinical environments, and reduce measurement errors due to intrinsic variations and drift of the sensors. Moreover, despite advancements in sensing technology, a gap remains in deploying high-performance sensors to point-of-care devices. This paper addresses these issues by presenting a comprehensive hardware platform for fast, non-invasive trypsin evaluation in saliva aimed to pancreatic cancer screening. The key finding of the work regards the adoption of a fast EIS time-based read-out approach, applied to nanoMIP technology, to drastically reduce the detection time of trypsin in artificial saliva samples. The detection is possible thanks to the adoption of a neural network. The RMSE, obtained by testing the system with trypsin concentrations from 0 to 100ngmL−1 in artificial saliva, is equal to 5.9 and 5.4 for training and test, respectively. The results prove the efficacy of the system as a portable, user-friendly device for rapid trypsin evaluation.
- 21 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-12
A Comprehensive Hardware Platform Leveraging Impedimetric nanoMIP Sensors for Fast Evaluation of Trypsin in Artificial Saliva
Pancreatic cancer is a leading cause of deaths world-wide, primarily due to late-stage diagnoses and limited treatment options. With the aim of introducing new screening strategies, research has intensified around trypsin, a promising biomarker exhibiting altered expression in pancreatic cancer patients. Conventional trypsin detection methods in biofluids show problems related to the need of trained personnel, bulky instrumentation, and high measurement time. The latter should be a key feature to accelerate the training of robust regression models with large datasets, gain prompt predictions in clinical environments, and reduce measurement errors due to intrinsic variations and drift of the sensors. Moreover, despite advancements in sensing technology, a gap remains in deploying high-performance sensors to point-of-care devices. This paper addresses these issues by presenting a comprehensive hardware platform for fast, non-invasive trypsin evaluation in saliva aimed to pancreatic cancer screening. The key finding of the work regards the adoption of a fast EIS time-based read-out approach, applied to nanoMIP technology, to drastically reduce the detection time of trypsin in artificial saliva samples. The detection is possible thanks to the adoption of a neural network. The RMSE, obtained by testing the system with trypsin concentrations from 0 to 100ngmL−1 in artificial saliva, is equal to 5.9 and 5.4 for training and test, respectively. The results prove the efficacy of the system as a portable, user-friendly device for rapid trypsin evaluation.
- Open Access
- 28 January 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (3) , 211
Adsorption Isotherm Analysis for Hybrid Molecularly Imprinted Polymeric Gold-Decorated Nanoparticles Suitable for Reliable Quantification of Gluconic Acid in Wine
A class of hybrid molecularly imprinted polymeric nanoparticles (nanoMIPs) comprising the in situ formation of gold nanoparticles (AuNPs) immobilised in a molecularly imprinted D-gluconate polymer has been designed with the objective of attempting the electrochemical quantification of gluconic acid (GA) in a wine setting. The imprinted polymers were synthesised in the presence of AuNP precursors in a pre-polymerisation mixture, which were confined to one another during the polymerisation of the chains. This allowed the formation of hybrid electroactive responsive imprinted nanoparticles (hybrid AuNPs@GA-nanoMIP), which exhibited enhanced electron conductivity. The morphological characterisation of the produced nanoMIPs revealed a fully decorated Au spherical surface of 200 nm in diameter. This resulted in a large active surface area distribution, as well a pronounced electrochemical peak response at the commercial screen-printed platinum electrode (SPPtE), accompanied by enhanced electron kinetics. The AuNPs@GA-nanoMIP sensor demonstrated the ability to detect a broad range of GA concentrations (0.025–5 mg/mL) with exceptional selectivity and reproducibility. The calibration curves were fitted with different isotherm models, such as the Langmuir, Freundlich and Langmuir–Freundlich functions. Moreover, the efficacy of the detection method was demonstrated by the recovery rates observed in real samples of Italian red wine. This research contributes to the development of a robust and reliable electrochemical sensor for the on-site determination of gluconic acid in food analysis.
- 28 January 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (3) , 211
Open AccessAdsorption Isotherm Analysis for Hybrid Molecularly Imprinted Polymeric Gold-Decorated Nanoparticles Suitable for Reliable Quantification of Gluconic Acid in Wine
A class of hybrid molecularly imprinted polymeric nanoparticles (nanoMIPs) comprising the in situ formation of gold nanoparticles (AuNPs) immobilised in a molecularly imprinted D-gluconate polymer has been designed with the objective of attempting the electrochemical quantification of gluconic acid (GA) in a wine setting. The imprinted polymers were synthesised in the presence of AuNP precursors in a pre-polymerisation mixture, which were confined to one another during the polymerisation of the chains. This allowed the formation of hybrid electroactive responsive imprinted nanoparticles (hybrid AuNPs@GA-nanoMIP), which exhibited enhanced electron conductivity. The morphological characterisation of the produced nanoMIPs revealed a fully decorated Au spherical surface of 200 nm in diameter. This resulted in a large active surface area distribution, as well a pronounced electrochemical peak response at the commercial screen-printed platinum electrode (SPPtE), accompanied by enhanced electron kinetics. The AuNPs@GA-nanoMIP sensor demonstrated the ability to detect a broad range of GA concentrations (0.025–5 mg/mL) with exceptional selectivity and reproducibility. The calibration curves were fitted with different isotherm models, such as the Langmuir, Freundlich and Langmuir–Freundlich functions. Moreover, the efficacy of the detection method was demonstrated by the recovery rates observed in real samples of Italian red wine. This research contributes to the development of a robust and reliable electrochemical sensor for the on-site determination of gluconic acid in food analysis.
- Open Access
- 18 March 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (6) , 536
Rational Design of a Portable Chemometric-Assisted Voltammetric Sensor Based on Ion-Imprinted Polymeric Film for Co(II) Determination in Water
Herein, chemometric-assisted synthesis of electrochemical sensors based on electropolymerised ion-imprinted polymeric (e-IIP) films was explored. Co(II)-IIPs sensors were prepared by performing electropolymerisation procedures of polymerisation mixtures comprising varying concentrations of an electroactive o-aminophenol (o-AP) monomer and Co(II) ions, respectively, according to the Taguchi L9 experimental design, exploiting the simultaneous evaluation of other controlled parameters during electrosynthesis. Each e-IIP developed from Taguchi runs was compared with the respective non-imprinted polymer (NIP) films and fitted according to Langmuir–Freudlich isotherms. Distinctive patterns of low and high-affinity films were screened based on the qualities and properties of the developed IIPs in terms of binding kinetics (KD), imprinting factor, and the heterogeneity index of produced cavities. These results can provide a generic protocol for chemometric-assisted synthesis of e-IIPs based on poly-o-AP, providing highly stable, reproducible, and high-affinity imprinted polymeric films for monitoring purposes.
- 18 March 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (6) , 536
Open AccessRational Design of a Portable Chemometric-Assisted Voltammetric Sensor Based on Ion-Imprinted Polymeric Film for Co(II) Determination in Water
Herein, chemometric-assisted synthesis of electrochemical sensors based on electropolymerised ion-imprinted polymeric (e-IIP) films was explored. Co(II)-IIPs sensors were prepared by performing electropolymerisation procedures of polymerisation mixtures comprising varying concentrations of an electroactive o-aminophenol (o-AP) monomer and Co(II) ions, respectively, according to the Taguchi L9 experimental design, exploiting the simultaneous evaluation of other controlled parameters during electrosynthesis. Each e-IIP developed from Taguchi runs was compared with the respective non-imprinted polymer (NIP) films and fitted according to Langmuir–Freudlich isotherms. Distinctive patterns of low and high-affinity films were screened based on the qualities and properties of the developed IIPs in terms of binding kinetics (KD), imprinting factor, and the heterogeneity index of produced cavities. These results can provide a generic protocol for chemometric-assisted synthesis of e-IIPs based on poly-o-AP, providing highly stable, reproducible, and high-affinity imprinted polymeric films for monitoring purposes.
- Open Access
- 28 December 2023
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 16 (5) , 742-750
An impedimetric sensor based on molecularly imprinted nanoparticles for the determination of trypsin in artificial matrices – towards point-of-care diagnostics
A high-performance impedimetric sensing platform was designed to detect proteins by employing molecularly imprinted polymeric nanoparticles (nanoMIPs) as selective receptors. This was achieved via the combination of the nanoMIPs with a self-assembled thioctic acid (SAM-TA) monolayer onto screen-printed gold electrodes, providing stable covalent attachment of the selective binder to the transducer. Taguchi design has been modelled to achieve the optimal level of sensor fabrication parameters and to maximise the immobilisation of nanoMIPs and their response (e.g. the response of imprinted polymers compared with the non-imprinted control). The developed sensor was tested towards a range of concentrations of trypsin dissolved in ammonium acetate (pH = 6) and showed promising applicability in artificial saliva, with a recovery percentage between 103 and 107%.
- 28 December 2023
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 16 (5) , 742-750
Open AccessAn impedimetric sensor based on molecularly imprinted nanoparticles for the determination of trypsin in artificial matrices – towards point-of-care diagnostics
A high-performance impedimetric sensing platform was designed to detect proteins by employing molecularly imprinted polymeric nanoparticles (nanoMIPs) as selective receptors. This was achieved via the combination of the nanoMIPs with a self-assembled thioctic acid (SAM-TA) monolayer onto screen-printed gold electrodes, providing stable covalent attachment of the selective binder to the transducer. Taguchi design has been modelled to achieve the optimal level of sensor fabrication parameters and to maximise the immobilisation of nanoMIPs and their response (e.g. the response of imprinted polymers compared with the non-imprinted control). The developed sensor was tested towards a range of concentrations of trypsin dissolved in ammonium acetate (pH = 6) and showed promising applicability in artificial saliva, with a recovery percentage between 103 and 107%.
- Open Access
- 9 May 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 35 (1) , 22
Preliminary Studies on the Synthesis of Redox-Labelled Molecularly Imprinted Nanoparticles in Sensor Development for the Quantification of Perfluoroalkyls in Water
Polyfluoroalkyl compounds (PFASs) are synthetic compounds recently classified as permanent and emerging chemicals ever since their bioaccumulation in humans and the environment, due to the presence of carbon–fluorine functional groups. The design of novel screening tools with addressed high response time for the routine quantification of PFASs in water is highly desirable. In this work, we propose the preparation of a new voltammetric sensor based on molecularly imprinted polymer nanoparticle (nanoMIP) receptors for the highly sensitive and selective quantification of PFASs in water. The nanoMIPs were synthesized by the solid phase approach and immobilized onto functionalized screen-printed platinum electrode (SPPtE), chosen as the transduction element for sensor development. Dimensional characterization of nanoMIPs by Dynamic light scattering (DLS) shows small nanosized imprinted particles (<200 nm) with a polydispersity index (PDI) below 0.3. Electrochemical techniques were used for sensor preparation, characterization, and to assess the analytical performance, respectively. Preliminary calibration curves of nanoMIP-based sensors in a wide range of PFAS concentrations (1.5–100 ng/mL) exhibited high sensitivity toward its target.
- 9 May 2023
- Published by MDPI AG in Engineering Proceedings
- Vol. 35 (1) , 22
Open AccessPreliminary Studies on the Synthesis of Redox-Labelled Molecularly Imprinted Nanoparticles in Sensor Development for the Quantification of Perfluoroalkyls in Water
Polyfluoroalkyl compounds (PFASs) are synthetic compounds recently classified as permanent and emerging chemicals ever since their bioaccumulation in humans and the environment, due to the presence of carbon–fluorine functional groups. The design of novel screening tools with addressed high response time for the routine quantification of PFASs in water is highly desirable. In this work, we propose the preparation of a new voltammetric sensor based on molecularly imprinted polymer nanoparticle (nanoMIP) receptors for the highly sensitive and selective quantification of PFASs in water. The nanoMIPs were synthesized by the solid phase approach and immobilized onto functionalized screen-printed platinum electrode (SPPtE), chosen as the transduction element for sensor development. Dimensional characterization of nanoMIPs by Dynamic light scattering (DLS) shows small nanosized imprinted particles (<200 nm) with a polydispersity index (PDI) below 0.3. Electrochemical techniques were used for sensor preparation, characterization, and to assess the analytical performance, respectively. Preliminary calibration curves of nanoMIP-based sensors in a wide range of PFAS concentrations (1.5–100 ng/mL) exhibited high sensitivity toward its target.
- Open Access
- 1 March 2023
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 383
Disposable electrochemical sensor based on ion imprinted polymeric receptor for Cd(II) ion monitoring in waters
- 1 March 2023
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 383
Open AccessDisposable electrochemical sensor based on ion imprinted polymeric receptor for Cd(II) ion monitoring in waters