Hongda Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hongda Li has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Daqing Huang
College of Electronic and Information Engineering, Nanjing University of Aeronautics and Astronautics, No. 29, Yudao Street, Nanjing 210016, China
1 shared publication - Hongming Cai
Academy of Astronautics, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
1 shared publication - Jie Huang
School of Aeronautic Engineering, Nanjing Vocational University of Industry Technology, Nanjing 210023, China
1 shared publication - Tao Chen
School of Aeronautical Engineering, Nanjing University of Industry Technology, Nanjing 210023, China
1 shared publication - Zhuoran Zhang
Academy of Astronautics, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
1 shared publication - Ziqi Li
Aircraft Design Institute, Jiangxi Hongdu Aviation Industry Co., Ltd., Nanchang 330095, China
1 shared publication
Latest Publications
- Open Access
Noise Prediction and Plasma-Based Control of Cavity Flows at a High Mach Number
Cavity flows are a prevalent phenomenon in aerospace engineering, known for their intricate structures and substantial pressure fluctuations arising from interactions among vortices. The primary objective of this research is to predict noise levels in high-speed cavity flows at Mach 4 for a rectangular cavity characterized by an aspect ratio of L/D = 7. Moreover, this study delves into the influence of the plasma actuator on noise control within the cavity flow regime. To comprehensively analyze acoustic characteristics and explore effective noise reduction strategies, a computational fluid dynamics technique with the combination of a delayed detached eddy simulation (DDES) and plasma phenomenological model is established. Remarkably, the calculated overall sound pressure level (OASPL) and plasma-induced velocity closely align with the experimental data, validating the reliability of the proposed approach. The results show that the dielectric barrier discharge (DBD) plasma actuator changes the movement range of a dominating vortex in the cavity to affect the OASPL at the point with the maximum noise level. The control of excitation voltage can reduce the cavity noise by 2.27 dB at most, while control of the excitation frequency can only reduce the cavity noise by 0.336 dB at most. Additionally, the increase in excitation frequency may result in high-frequency sound pressure, but the influence is weakened with the increase in the excitation frequency. The findings highlight the potential of the plasma actuator in reducing high-Mach-number cavity noise.
Open AccessNoise Prediction and Plasma-Based Control of Cavity Flows at a High Mach Number
Cavity flows are a prevalent phenomenon in aerospace engineering, known for their intricate structures and substantial pressure fluctuations arising from interactions among vortices. The primary objective of this research is to predict noise levels in high-speed cavity flows at Mach 4 for a rectangular cavity characterized by an aspect ratio of L/D = 7. Moreover, this study delves into the influence of the plasma actuator on noise control within the cavity flow regime. To comprehensively analyze acoustic characteristics and explore effective noise reduction strategies, a computational fluid dynamics technique with the combination of a delayed detached eddy simulation (DDES) and plasma phenomenological model is established. Remarkably, the calculated overall sound pressure level (OASPL) and plasma-induced velocity closely align with the experimental data, validating the reliability of the proposed approach. The results show that the dielectric barrier discharge (DBD) plasma actuator changes the movement range of a dominating vortex in the cavity to affect the OASPL at the point with the maximum noise level. The control of excitation voltage can reduce the cavity noise by 2.27 dB at most, while control of the excitation frequency can only reduce the cavity noise by 0.336 dB at most. Additionally, the increase in excitation frequency may result in high-frequency sound pressure, but the influence is weakened with the increase in the excitation frequency. The findings highlight the potential of the plasma actuator in reducing high-Mach-number cavity noise.
- Open Access
- 18 April 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (8) , 5058
Numerical Investigation on Aerodynamics of a Rectangular Blade Rotor under Mars Air Conditions Using Large Eddy Simulation
The study of the aerodynamics of a flight vehicle under Martian air conditions is experimentally difficult due to its characteristics such as low air density and temperature, making the vehicle operate at an ultra-low Reynolds number, which in turn introduces a complex flow field. In this paper, to find a proper computational fluid dynamics (CFD) method with which to better understand the aerodynamics of rotor-type aircraft under Martian air conditions, the aerodynamic performance of a rotor with rectangular blades under ultra-low density Martian air conditions is studied. A simulation scheme using a large eddy simulation solver and sliding meshing technology is established, and the method is verified based on experimental results from a Mars Air Simulator (MAS). In addition, the influence of the test bench and chamber is investigated through flow field analysis. The results show that the established method can predict lift in a very accurate manner, but that the torque prediction is not so promising. The study also determines that the fixture and the chamber wall of an MAS has little influence on the prediction of aerodynamic performance due to the quickly decreasing of flow speed and dissipation of vortexes. The test bench has about 5% influence on lift prediction, possibly due to the ground effect of the bench. In addition, simulation under actual Martian air conditions shows that the results agree well with the MAS experiment’s results, indicating that the temperature difference has little influence on the lift performance, and therefore that the MAS is a good tool for the lift prediction of Martian helicopters.
- 18 April 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (8) , 5058
Open AccessNumerical Investigation on Aerodynamics of a Rectangular Blade Rotor under Mars Air Conditions Using Large Eddy Simulation
The study of the aerodynamics of a flight vehicle under Martian air conditions is experimentally difficult due to its characteristics such as low air density and temperature, making the vehicle operate at an ultra-low Reynolds number, which in turn introduces a complex flow field. In this paper, to find a proper computational fluid dynamics (CFD) method with which to better understand the aerodynamics of rotor-type aircraft under Martian air conditions, the aerodynamic performance of a rotor with rectangular blades under ultra-low density Martian air conditions is studied. A simulation scheme using a large eddy simulation solver and sliding meshing technology is established, and the method is verified based on experimental results from a Mars Air Simulator (MAS). In addition, the influence of the test bench and chamber is investigated through flow field analysis. The results show that the established method can predict lift in a very accurate manner, but that the torque prediction is not so promising. The study also determines that the fixture and the chamber wall of an MAS has little influence on the prediction of aerodynamic performance due to the quickly decreasing of flow speed and dissipation of vortexes. The test bench has about 5% influence on lift prediction, possibly due to the ground effect of the bench. In addition, simulation under actual Martian air conditions shows that the results agree well with the MAS experiment’s results, indicating that the temperature difference has little influence on the lift performance, and therefore that the MAS is a good tool for the lift prediction of Martian helicopters.