Mo Chen

Seawater conductivity (salinity), temperature, and depth (CTD) are key parameters for characterizing oceanic hydrodynamic processes, climate evolution, underwater acoustics and marine ecosystems. This paper systematically reviews recent research progress on fiber Bragg grating (FBG)-based ocean CTD sensing technologies from both single-parameter and multi-parameter perspectives, analyzing the sensing mechanisms for each of the three parameters, introducing corresponding sensitivity enhancement methods, and systematically summarizing sensor design and decoupling strategies for cross-sensitivity issues in multi-parameter measurements, with critical comparisons and discussions. Additionally, the application of FBG-based CTD sensors in sea trials, including shallow-water buoys, ship-towed systems, and seabed observation networks, is summarized. Finally, the paper discusses the future prospects and challenges of FBG technology in ocean CTD sensing, providing insights for the research, development, and application of high-precision, distributed fiber-optic ocean CTD observation equipment.

In ocean engineering, the demand for fiber-optic vector hydrophones (FOVHs) is increasing. The performance of a FOVH depends on phase consistency between its pressure and acceleration channels, which should match the acoustic field’s properties. Phase polarity, which refers to the alignment of the output signal with the acoustic field direction, is critical. Incorrect phase polarity during sensor assembly can disrupt phase consistency and invalidate directional measurements. This study investigates phase polarity in mandrel FOVHs that use the Phase Generated Carrier (PGC) technique. We develop a theoretical model combining the PGC algorithm with elastic mechanics to analyze the response of acoustic signals. Our model shows that correct demodulated signal polarity requires a specific physical setup: the pressure sensor’s long arm should be on the inner mandrel and the short arm on the outer, while the accelerometer’s positive axis should follow the vector from the long to its short arm. These results are validated through standing wave tube experiments and lake tests. This research provides practical guidelines for the installation and calibration of FOVHs, ensuring phase consistency in underwater acoustic sensing.

Phase consistency among hydrophones in fiber-optic hydrophone (FOH) arrays is crucial for effective beamforming. In this study, we investigate the photoelectric detection phase characteristics of FOHs based on the 3 × 3 coupler demodulation technique. We develop a theoretical model combining the 3 × 3 coupler demodulation algorithm with coupled-mode theory to analyze acoustic signal responses. Our model reveals that phase shifts from coupler-to-photodetector and coupler-to-sensing-arm connections arise from different mechanisms, and both are capable of causing π rad phase inversions in demodulated signals. We demonstrate that distinct connection configurations can be classified into groups yielding identical polarity outcomes, and that the input port selection for incident light does not affect output signal phase polarity. Experimental results validate these theoretical predictions. This work establishes critical hardware-level prerequisites for phase polarity consistency in FOH arrays, complementing existing calibration techniques and enhancing array performance in underwater target detection and localization.

We have conducted a study on a very-low-frequency acoustic-velocity sensor which is based on a cantilever of distributed-feedback (DFB) fiber laser immersed in castor oil. A mathematical model of the frequency dependent response of the proposed sensor to the acoustic pressure signal influenced by the fluid viscosity is established. We have fabricated the proposed sensor and conducted experimental measurements in the standing wave tube. The results show that the sensor has an average phase sensitivity of −179.5 dB (0 dB = 1 rad/μPa) with ±1.45 dB fluctuation over the frequency range of 20–38 Hz. It has good cosine directivity with a directivity index of 32.5 dB and axial maximum asymmetry of 0.4 dB. The sensor presents promising applications for detecting very-low-frequency underwater acoustic signals.