Youhong Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Youhong Xiao has a total of 76 co-authors. Here are the top co-authors by number of shared publications:
- Huabing Lu
College of Power and Energy Engineering 1 , Harbin Engineering University, Harbin 150001
6 shared publications - Ye Yuan
College of Power and Energy Engineering 1 , Harbin Engineering University, Harbin 150001
6 shared publications - Chenyu Zhang
College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001, People’s Republic of China
5 shared publications Zhigang Liu
5 shared publications- Liang Yu
Northwestern Polytechnical University
4 shared publications - Peilin Zhou
University of Strathclyde
4 shared publications
Latest Publications
- 14 May 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Theoretical and Computational Acoustics
- Vol. 34 (03)
Row-Sparse Bayesian Integrated Detection of Duct Acoustic Modes in the Presence of Faulty Microphones
Duct acoustic mode identification is easily biased by faulty microphones, whose abnormal channel deviations degrade the performance of traditional discrete Fourier transform and compressive-sensing methods. To address this issue, this paper proposes a row-sparse Bayesian integrated detection (RBID) method for simultaneous faulty-microphone localization and duct mode identification. In the proposed framework, abnormal channel deviations and mode coefficients are jointly modeled under a multi-snapshot row-sparse hierarchical prior, and their posterior estimates are inferred within a Bayesian framework. Faulty microphones are then automatically localized from the estimated abnormal deviations, after which a second-stage Bayesian compressive-sensing identification is performed using the remaining healthy channels. Numerical simulations show that, when the proportion of faulty microphones does not exceed 10%, the proposed method achieves fault-detection accuracies above 90% and dominant-mode amplitude errors below 1 dB. Experiments on a 1.5-stage axial compressor further show that, after excluding the detected faulty channels, the dominant-mode amplitude error is around 0.5 dB. The proposed method is effective for duct mode identification under a relatively small proportion of persistent or quasi-persistent faulty microphones, while reducing the need for case-by-case tuning of regularization coefficients.
- 14 May 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Theoretical and Computational Acoustics
- Vol. 34 (03)
Row-Sparse Bayesian Integrated Detection of Duct Acoustic Modes in the Presence of Faulty Microphones
Duct acoustic mode identification is easily biased by faulty microphones, whose abnormal channel deviations degrade the performance of traditional discrete Fourier transform and compressive-sensing methods. To address this issue, this paper proposes a row-sparse Bayesian integrated detection (RBID) method for simultaneous faulty-microphone localization and duct mode identification. In the proposed framework, abnormal channel deviations and mode coefficients are jointly modeled under a multi-snapshot row-sparse hierarchical prior, and their posterior estimates are inferred within a Bayesian framework. Faulty microphones are then automatically localized from the estimated abnormal deviations, after which a second-stage Bayesian compressive-sensing identification is performed using the remaining healthy channels. Numerical simulations show that, when the proportion of faulty microphones does not exceed 10%, the proposed method achieves fault-detection accuracies above 90% and dominant-mode amplitude errors below 1 dB. Experiments on a 1.5-stage axial compressor further show that, after excluding the detected faulty channels, the dominant-mode amplitude error is around 0.5 dB. The proposed method is effective for duct mode identification under a relatively small proportion of persistent or quasi-persistent faulty microphones, while reducing the need for case-by-case tuning of regularization coefficients.
- 30 April 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (19)
Physically Informed Complex Neural Network for Sound Source Localization in Reverberant Environments
Accurate localization of acoustic sources in reverberant environments is important for low-noise mechanical design, yet remains challenging due to multipath reflections and environmental uncertainty. In this study, a physically informed complex neural network is proposed, in which acoustic transfer functions derived from the image source method or the free-field Green's function are used as input features. By preserving both magnitude and phase information through complex-domain operations, the model incorporates physical priors while leveraging the representation capability of deep learning to reduce reverberation-induced distortions. Unlike conventional methods that rely heavily on idealized assumptions, the proposed approach learns to compensate for discrepancies between physically modeled and observed acoustic responses. The model is evaluated under different reverberation times and source frequencies. The results show more favorable localization accuracy and sidelobe suppression than those of conventional deconvolution methods and recent deep-learning baselines such as FISTA-Net within the tested conditions. Additional ablation studies further demonstrate the contributions of complex-valued learning and physically informed modeling to the observed performance. Experimental validation in a controlled enclosed acoustic space also supports the feasibility of the proposed framework.
- 30 April 2026
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 37 (19)
Physically Informed Complex Neural Network for Sound Source Localization in Reverberant Environments
Accurate localization of acoustic sources in reverberant environments is important for low-noise mechanical design, yet remains challenging due to multipath reflections and environmental uncertainty. In this study, a physically informed complex neural network is proposed, in which acoustic transfer functions derived from the image source method or the free-field Green's function are used as input features. By preserving both magnitude and phase information through complex-domain operations, the model incorporates physical priors while leveraging the representation capability of deep learning to reduce reverberation-induced distortions. Unlike conventional methods that rely heavily on idealized assumptions, the proposed approach learns to compensate for discrepancies between physically modeled and observed acoustic responses. The model is evaluated under different reverberation times and source frequencies. The results show more favorable localization accuracy and sidelobe suppression than those of conventional deconvolution methods and recent deep-learning baselines such as FISTA-Net within the tested conditions. Additional ablation studies further demonstrate the contributions of complex-valued learning and physically informed modeling to the observed performance. Experimental validation in a controlled enclosed acoustic space also supports the feasibility of the proposed framework.
- 1 March 2026
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 159 (3) , 1973-1986
Physics-aware graph learning for sound-field reconstruction from sparse measurements
A graph neural network (GNN) framework is presented for reconstructing room-acoustic sound fields from sparse microphone measurements. Microphones, sources, and candidate field points are represented as a graph whose node and edge embeddings encode geometric priors and physics-aware features related to wave propagation. A principal neighbourhood aggregation architecture performs message passing and readout to estimate complex acoustic pressure at unobserved locations. Experiments on the MeshRIR dataset demonstrate robust reconstruction across a wide range of sampling sparsities and frequencies. Compared with cylindrical harmonics and plane wave expansion with regularized least squares, the proposed GNN yields consistently lower reconstruction error and higher spatial correlation, with gains most evident under very sparse sampling and at higher frequencies. These results indicate that graph-based learning, equipped with geometric and physics-aware representations, provides an effective and physically consistent approach to sound-field reconstruction for room acoustics.
- 1 March 2026
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 159 (3) , 1973-1986
Physics-aware graph learning for sound-field reconstruction from sparse measurements
A graph neural network (GNN) framework is presented for reconstructing room-acoustic sound fields from sparse microphone measurements. Microphones, sources, and candidate field points are represented as a graph whose node and edge embeddings encode geometric priors and physics-aware features related to wave propagation. A principal neighbourhood aggregation architecture performs message passing and readout to estimate complex acoustic pressure at unobserved locations. Experiments on the MeshRIR dataset demonstrate robust reconstruction across a wide range of sampling sparsities and frequencies. Compared with cylindrical harmonics and plane wave expansion with regularized least squares, the proposed GNN yields consistently lower reconstruction error and higher spatial correlation, with gains most evident under very sparse sampling and at higher frequencies. These results indicate that graph-based learning, equipped with geometric and physics-aware representations, provides an effective and physically consistent approach to sound-field reconstruction for room acoustics.
- 1 February 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (2)
Comparative analysis of source and radiation characteristics of acoustic perturbation equations in hybrid aeroacoustic predictions
This study systematically investigates the coupling between acoustic sources and radiated sound in the acoustic perturbation equations (APE1 and APE2), where the acoustic source terms are constructed from incompressible flow simulations, as well as the influence of source truncation and mesh resolution on the accuracy of acoustic predictions. Both formulations are implemented in the open-source platform OpenFOAM and validated using a canonical two-dimensional circular–cylinder flow at Re=150. The flow field is obtained by solving the incompressible Navier–Stokes equations, while the acoustic field is computed through APE1 and APE2. Modal analysis, Helmholtz decomposition, and beamforming are employed to separate the acoustic and hydrodynamic pressure components and to identify the radiation characteristics of spurious sources. To suppress artificial radiation caused by abrupt source truncation, a smooth Hanning-based truncation approach is proposed and quantitatively assessed. In addition, a systematic mesh resolution study is conducted, leading to the establishment of non-dimensional accuracy criteria for both formulations. Results indicate that APE1 provides stable and accurate acoustic predictions even on moderately refined grids when smooth truncation is applied, whereas APE2 effectively suppresses hydrodynamic contamination, exhibits compact source localization near the wall, and therefore requires no truncation but finer spatial resolution. The proposed truncation and resolution strategies are further validated through simulations of tandem square cylinders, demonstrating good generality for multi-bluff-body configurations. These findings provide practical guidelines for balancing computational cost and acoustic accuracy in incompressible hybrid aeroacoustic simulations.
- 1 February 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (2)
Comparative analysis of source and radiation characteristics of acoustic perturbation equations in hybrid aeroacoustic predictions
This study systematically investigates the coupling between acoustic sources and radiated sound in the acoustic perturbation equations (APE1 and APE2), where the acoustic source terms are constructed from incompressible flow simulations, as well as the influence of source truncation and mesh resolution on the accuracy of acoustic predictions. Both formulations are implemented in the open-source platform OpenFOAM and validated using a canonical two-dimensional circular–cylinder flow at Re=150. The flow field is obtained by solving the incompressible Navier–Stokes equations, while the acoustic field is computed through APE1 and APE2. Modal analysis, Helmholtz decomposition, and beamforming are employed to separate the acoustic and hydrodynamic pressure components and to identify the radiation characteristics of spurious sources. To suppress artificial radiation caused by abrupt source truncation, a smooth Hanning-based truncation approach is proposed and quantitatively assessed. In addition, a systematic mesh resolution study is conducted, leading to the establishment of non-dimensional accuracy criteria for both formulations. Results indicate that APE1 provides stable and accurate acoustic predictions even on moderately refined grids when smooth truncation is applied, whereas APE2 effectively suppresses hydrodynamic contamination, exhibits compact source localization near the wall, and therefore requires no truncation but finer spatial resolution. The proposed truncation and resolution strategies are further validated through simulations of tandem square cylinders, demonstrating good generality for multi-bluff-body configurations. These findings provide practical guidelines for balancing computational cost and acoustic accuracy in incompressible hybrid aeroacoustic simulations.
- 22 December 2025
- Published by Elsevier in Neural Networks
- Vol. 197, 108476
Frequency-domain physics-informed neural network for accurate reconstruction of 3D acoustic fields under sparse and multi-frequency measurements
- 22 December 2025
- Published by Elsevier in Neural Networks
- Vol. 197, 108476
Frequency-domain physics-informed neural network for accurate reconstruction of 3D acoustic fields under sparse and multi-frequency measurements
- 22 November 2025
- Published by Elsevier in Applied Acoustics
- Vol. 244
Numerical investigation of the impeller blockage effect on centrifugal fan noise using a hybrid prediction approach with rotating system
- 22 November 2025
- Published by Elsevier in Applied Acoustics
- Vol. 244
Numerical investigation of the impeller blockage effect on centrifugal fan noise using a hybrid prediction approach with rotating system
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
Large eddy simulation on aerodynamic noise mechanism of variable-pitch axial fan
This paper deeply discusses the differences between the internal flow and noise generation mechanism of the variable-pitch axial fan caused by the existence of the rotor root gap and that of the traditional fan from three aspects: internal flow, aerodynamic noise source, and flow-noise synergy. The numerical results show that the third-generation vortex identification method can identify blade root vortex V1 and blade root gap vortex V2 that are not found in traditional rotating machinery, as well as their impact on the stator hub to produce V5, a rotor–stator interaction that cannot be ignored. The distribution of time derivative of pressure and Lamb vector shows that the noise mechanism of the variable-pitch axial fan also includes the interference of V1 with the hub and adjacent rotors during the development process, in addition to the above interference and the tip leakage vortex V4 and stator interference that exist in traditional fan outside. The new flow interference effects and corresponding noise mechanisms within the variable-pitch axial fan are elaborated upon, revealing characteristics that are entirely distinct from those of the traditional fan. Finally, the synergistic relationship between flow velocity and acoustic pressure is examined to elucidate the connection between the flow field and the radiated noise.
- 1 October 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (10)
Large eddy simulation on aerodynamic noise mechanism of variable-pitch axial fan
This paper deeply discusses the differences between the internal flow and noise generation mechanism of the variable-pitch axial fan caused by the existence of the rotor root gap and that of the traditional fan from three aspects: internal flow, aerodynamic noise source, and flow-noise synergy. The numerical results show that the third-generation vortex identification method can identify blade root vortex V1 and blade root gap vortex V2 that are not found in traditional rotating machinery, as well as their impact on the stator hub to produce V5, a rotor–stator interaction that cannot be ignored. The distribution of time derivative of pressure and Lamb vector shows that the noise mechanism of the variable-pitch axial fan also includes the interference of V1 with the hub and adjacent rotors during the development process, in addition to the above interference and the tip leakage vortex V4 and stator interference that exist in traditional fan outside. The new flow interference effects and corresponding noise mechanisms within the variable-pitch axial fan are elaborated upon, revealing characteristics that are entirely distinct from those of the traditional fan. Finally, the synergistic relationship between flow velocity and acoustic pressure is examined to elucidate the connection between the flow field and the radiated noise.
- 1 October 2025
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 158 (4) , 2963-2978
Bayesian-driven cyclic-cross-spectral matrix completion: Non-synchronous measurements for cyclostationary acoustic sources
Accurate identification of cyclostationary acoustic sources, such as those generated by rotating machinery, is critical for noise control and fault diagnosis. Non-synchronous measurement (NSM) techniques using microphone arrays offer a cost-effective solution to overcome hardware limitations like insufficient aperture and spatial aliasing. However, existing methods, particularly fast iterative shrinkage-thresholding algorithm (FISTA)-based matrix completion algorithms, face two major challenges: (1) cumbersome parameter tuning due to reliance on empirical regularization and (2) lack of theoretical validation for cyclostationary scenarios where the low-rankness of cyclic-cross-spectral matrices (CCSMs) remains unproven. To address these issues, this paper proposes a Bayesian matrix completion framework tailored for cyclostationary NSM. The low-rank property of CCSM is rigorously established under cyclostationary conditions, and spatial continuity constraints are derived from frequency-shifted Green's function bases. A hierarchical Bayesian model is developed to automate parameter inference, eliminating manual tuning while integrating physical constraints. Numerical simulations demonstrate superior performance over FISTA, with lower matrix completion errors and source reconstruction errors under low signal-to-noise ratios and high-frequency regimes. Experimental validations, including loudspeaker localization and high-pressure pump noise mapping, confirm the method's ability to suppress aliasing artifacts, narrow main-lobewidth, and enhance spatial resolution.
- 1 October 2025
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 158 (4) , 2963-2978
Bayesian-driven cyclic-cross-spectral matrix completion: Non-synchronous measurements for cyclostationary acoustic sources
Accurate identification of cyclostationary acoustic sources, such as those generated by rotating machinery, is critical for noise control and fault diagnosis. Non-synchronous measurement (NSM) techniques using microphone arrays offer a cost-effective solution to overcome hardware limitations like insufficient aperture and spatial aliasing. However, existing methods, particularly fast iterative shrinkage-thresholding algorithm (FISTA)-based matrix completion algorithms, face two major challenges: (1) cumbersome parameter tuning due to reliance on empirical regularization and (2) lack of theoretical validation for cyclostationary scenarios where the low-rankness of cyclic-cross-spectral matrices (CCSMs) remains unproven. To address these issues, this paper proposes a Bayesian matrix completion framework tailored for cyclostationary NSM. The low-rank property of CCSM is rigorously established under cyclostationary conditions, and spatial continuity constraints are derived from frequency-shifted Green's function bases. A hierarchical Bayesian model is developed to automate parameter inference, eliminating manual tuning while integrating physical constraints. Numerical simulations demonstrate superior performance over FISTA, with lower matrix completion errors and source reconstruction errors under low signal-to-noise ratios and high-frequency regimes. Experimental validations, including loudspeaker localization and high-pressure pump noise mapping, confirm the method's ability to suppress aliasing artifacts, narrow main-lobewidth, and enhance spatial resolution.
- 25 September 2025
- Published by Elsevier in Applied Acoustics
- Vol. 242
Deconvolution model for the cyclostationary acoustic source beamforming with high spatial resolution
- 25 September 2025
- Published by Elsevier in Applied Acoustics
- Vol. 242
Deconvolution model for the cyclostationary acoustic source beamforming with high spatial resolution
- 4 July 2025
- Published by Springer Nature
- p. 381-389
Process Simulation and Absorbent Optimization of Marine Carbon Capture Systems Based on Aspen Plus
- 4 July 2025
- Published by Springer Nature
- p. 381-389
Process Simulation and Absorbent Optimization of Marine Carbon Capture Systems Based on Aspen Plus