AMAlessandro Marongiu

Alessandro Marongiu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alessandro Marongiu has a total of 49 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Assessment of Air Quality Impacts from Wood-Fired Pizza Ovens: Comparison with Major Urban Emission Sources

    by Andrea Bergomi, Chiara Veronese, Silvia Luciani, Loris Colombo, Eleonora Cuccia, Guido Giuseppe Lanzani, Matteo Lazzarini, Sara Gemelli, Celeste Damiani, Valentina Urbano, et al.

    Wood-fired ovens used in pizzerias represent a potential source of air pollution in urban areas. Local emission inventories indicate that restaurants and pizzerias with wood-fired ovens have a non-negligible contribution to the emission of several air pollutants, especially particulate matter and polycyclic aromatic hydrocarbons. This study presents an integrated framework combining data-driven source identification, experimentally measured emission factors, atmospheric dispersion modelling, and air quality observations to assess the impact of wood-fired pizza ovens in the urban context of Milan (Italy). To validate and strengthen the robustness of the modelling framework, analogous simulations were also performed for road traffic and heating systems, representing the major urban emission sources, and compared with measurements from the ARPA Lombardia monitoring network. Results showed that wood-fired oven emissions are concentrated in the city center and can contribute appreciably to local primary particulate matter concentrations (0.085–3.34 µg m−3 PM10). While their contribution to NOx concentrations is limited (0.0044–1.75 µg m−3), simulations indicated a measurable influence on biomass-burning tracers, including levoglucosan (19.70%, 34.28%) and benzo(a)pyrene (34.95%, 37.47%). Overall, wood-fired pizza ovens are not a dominant source of urban air pollution but represent a relevant local contributor to particulate matter and combustion-related tracers.

  • Open Access

    Assessment of Air Quality Impacts from Wood-Fired Pizza Ovens: Comparison with Major Urban Emission Sources

    by Andrea Bergomi, Chiara Veronese, Silvia Luciani, Loris Colombo, Eleonora Cuccia, Guido Giuseppe Lanzani, Matteo Lazzarini, Sara Gemelli, Celeste Damiani, Valentina Urbano, et al.

    Wood-fired ovens used in pizzerias represent a potential source of air pollution, particularly in urban areas where they are most concentrated. The combination of wood combustion and cooking operations is a distinctive feature of these appliances and results in a unique emission profile. Local emission inventories indicate that restaurants and pizzerias with wood-fired ovens have a non-negligible contribution to the emission of several air pollutants, especially particulate matter and polycyclic aromatic hydrocarbons. This study presents an integrated framework combining data-driven source identification, experimentally measured emission factors, atmospheric dispersion modelling, and air-quality observations to assess the impact of wood-fired pizza ovens in the urban context of Milan (Italy). To validate and strengthen the robustness of the modelling framework, analogous simulations were also performed for road traffic and heating systems, representing the major urban emission sources, and compared with measurements from the ARPA Lombardia monitoring network. Results showed that wood-fired oven emissions are concentrated in the city center and can contribute appreciably to local primary particulate matter concentrations (0.085 – 3.34 µg m−3 PM10). While their contribution to NOx concentrations is limited (0.0044 - 1.75 µg m−3), simulations indicated a measurable influence on biomass-burning tracers, including levoglucosan (19.70 - 34.28%) and benzo(a)pyrene (34.95 - 37.47%). Overall, wood-fired pizza ovens are not a dominant source of urban air pollution but represent a relevant local contributor to particulate matter and combustion-related tracers.

  • Open Access

    Link-based European road transport emissions for CAMS-REG v8.1 and a comparison to city inventories

    by Tilman Leo Hohenberger, Marya el Malki, Antoon Visschedijk, Marc Guevara, Martin Otto Paul Ramacher, Alessandro Marongiu, Guido Giuseppe Lanzani, Giuseppe Fossati, Anu Kousa, Eleni Athanasopoulou, et al.

    Spatially resolved estimates of road transport emissions are fundamental for tackling challenges of air pollution and greenhouse gas emissions. Emission estimates at 0.05° × 0.1° resolution are provided in the widely used CAMS-REG regional European emissions inventory. Building on previous work by Kuenen et al. (2022) for the road transport sector, several improvement opportunities were identified: Firstly (1) an underestimation of ca. 35 % of NOx emissions in comparison to 8 independent urban inventories; secondly (2), artefacts in the spatial distribution in Eastern European non-EU countries; thirdly (3), the necessity of labour-intense downscaling methodologies to create high-resolution urban inventories from the fixed resolution dataset. To overcome these, emissions for most road links in the domain (n = 59 710 490) were estimated using gap-filled activity data (AADT) from OpenTransportMap, targetting NOx for the base year 2018. Gap filling was performed with random forest models trained on land-use and road information data and with a spatial method for small roads. For non-EU countries, model performance was R2: 0.63, MAE(AADT): 2028, for EU countries it was R2: 0.74, MAE(AADT): 1570, with better performance for larger roads. Up-to-date emission factors for NOx were applied on road links using a novel maximum-speed–based classification. To generate the CAMS-REG v8.1 inventory, the resulting spatial distribution was used as a proxy map, together with national totals. The new dataset is based on OpenStreetMap geometries and lowered the difference to city inventories to 18 % for absolute NOx emissions. It can be flexibly gridded to high resolutions. Some non-EU cities see large increases (Kiev, +84 %, Istanbul, +360 %) in attributed emissions due to the updated spatial distribution. Two case studies (London and Milan) show an increased spatial correlation, from R2≈0.3 using CAMS-REG v4.2 to R2≈0.6, with CAMS-REG v8.1 against the local inventory. Vector and gridded versions of the emission dataset and spatial distribution are available at https://doi.org/10.5281/zenodo.15688722 (Hohenberger et al., 2025).

  • Open Access

    An inter-comparison of bottom-up and satellite-derived emissions for trace gases over agricultural regions in Europe

    by Eleftherios Ioannidis, Jieying Ding, Ronald van der A, Roy Wichink Kruit, Alessandro Marongiu, Michiel van Weele

    Trace gases, such as ammonia (NH3) and nitrogen oxides (NOx), serve as key precursors for secondary inorganic aerosols and play an important role in air quality and the nitrogen cycle. The primary anthropogenic sources of NH3 and NOx in Europe are agriculture, industry and transportation. Additionally, soil NOx emissions contribute significantly to the total NOx budget. Anthropogenic emission reporting is based on “bottom-up” emission inventories, which provide gridded NH3 and NOx emissions, and are widely used for air quality modelling and effective policymaking.However, bottom-up emission inventories rely on statistical information, activity data and emission factors, resulting to uncertainties and significant time lags in data availability. Therefore, in addition to bottom-up emission inventories, “top-down” methods have been developed using various inverse modelling techniques. These techniques make use of satellite data, which provide independent information on emissions and can be used to evaluate bottom-up emission inventories and help to identify potential unknown or unreported sources.In this study we use the Daily Emissions Constrained by Satellite Observations (DECSO) inversion algorithm combined with Cross-track Infrared Sounder (CrIS) and TROPOspheric Monitoring Instrument (TROPOMI) satellite data to derive NH3 and NOx emissions on a spatial resolution of 0.1o x 0.1o. DECSO is coupled to Eulerian regional offline CHIMERE CTM. Our study focuses on BENELUX and Po-Valley, two regions with high agricultural emissions, as part of the Agricultural Atmospheric Emissions (AGATE) ESA project.We validate the DECSO NH3 and NOx emissions by comparing them directly against bottom-up inventories, such as Copernicus Atmosphere Monitoring Service (CAMS) and Emissions Database for Global Atmospheric Research (EDGAR). Satellite-derived emissions are consistent with bottom-up inventories regarding the magnitude of country-region totals.To further validate the DECSO emissions we also perform forward simulations using CHIMERE CTM with DECSO and bottom-up emission inventories. The focus of the validation here is on aerosol precursors, such as nitrogen dioxide (NO2) and NH3, and compare the model results against in-situ observations and independent satellite data. The comparison against observations shows that the model simulations using the DECSO NH3 and NOx emissions perform similarly to simulations using bottom-up inventories providing further confidence on the quality of satellite-derived emissions.

  • Open Access

    Estimating Ammonia Emissions and Nitrogen Mass Balance in the Po-Basin: Models, Tools, and Policy Implications

    by Matteo Balboni, Alessandro Marongiu, Domenico Vito

    Within the LIFE PREPAIR project, the BAT-Tool Plus (released in February 2022) was developed to estimate ammonia (NH3) and greenhouse gas emissions from intensive livestock farming in the Po-basin, a hotspot for agricultural air pollution. The tool applies a nitrogen mass balance approach, considering housing, storage, treatment, and land application phases, integrating EU Best Available Techniques (BAT) standards. The BAT-Tool includes high-resolution and tailored methodologies, allowing single farms and regional-scale simulations. In this study, the BAT-Tool was applied to the Po-basin using 2023 data from the National Livestock Database and regional statistics on manure management. The results show that around one-third of nitrogen excreted by livestock is lost as NH3, confirming livestock as the dominant source of emissions compared to fertilizers. In this paper, ammonia emissions and nitrogen load to fields were estimated, analyzing potential reductions achievable with wider adoption of BAT. The BAT-Tool provides standardized, transparent estimates, supporting regulatory compliance, emission inventories, and policy planning. Its scalability from farms to district scale makes it a reference model for improving nitrogen management and reducing PM2.5 precursors in northern Italy and potentially across the EU.


  • Open Access

    Link-based European road transport emissions for CAMS-REG v8.1 and a comparison to city inventories

    by Tilman Leo Hohenberger, Marya el Malki, Antoon Visschedijk, Marc Guevara, Paul Ramacher, Alessandro Marongiu, Guido Giuseppe Lanzani, Giuseppe Fossati, Anu Kousa, Eleni Athanasopoulou, et al.

    Spatially resolved estimates of road transport emissions are fundamental for tackling challenges of air pollution and greenhouse gas emissions. Emission estimates at 0.05° x 0.1° resolution are provided in the widely used CAMS-REG regional European emissions inventory. For the road transport sector, several improvement opportunities were identified: Firstly (1) an underestimation of ca. 35 % of NOx emissions in comparison to 8 independent urban inventories; secondly (2), artefacts in the spatial distribution in Eastern European non-EU countries; thirdly (3), the necessity of labour-intense downscaling methodologies to create high-resolution urban inventories from the fixed resolution dataset. To overcome these, emissions for all road links in the domain (n=59,710,490) were estimated using gap-filled activity data (AADT) from OpenStreetMap and OpenTransportMap. Gap filling was performed with random forest models trained on land-use and road information data. Model performance was R2: 0.63–0.74 and MAE(AADT): 1570–2028, with better performance for larger roads. Up-to-date emission factors were applied on road links using a novel maximum-speed–based classification. To generate the CAMS-REG v8.1 inventory, the resulting spatial distribution was used as a proxy map, together with national totals. The new dataset lowered the difference-to-city inventories to 19 % for absolute NOx emissions, and can be flexibly gridded to high resolutions. Median increase in urban emission share is 24 % compared to national totals, and non-EU cities see large increases (e.g. Istanbul, +197 %; St. Petersburg, +288 %) in attributed emissions due to the updated spatial distribution. Two case studies (London and Milan) show an increased spatial correlation, from R2 ≈ 0.3 using CAMS-REG v4.2 to R2 ≈ 0.6, with CAMS-REG v8.1 against the local inventory. Vector and gridded versions of the emission dataset and spatial distribution are available at https://doi.org/10.5281/zenodo.15688723 (Hohenberger et al. (2025)).


  • Open Access

    Future Meteorological Impact on Air Quality in the Po Valley

    by Loris Colombo, Alessandro Marongiu, Giulia Malvestiti, Guido Giuseppe Lanzani

    Air quality in the Po Valley (Northern Italy), one of Europe’s most polluted regions, remains a major concern due to its unfavorable orographic setting and intense anthropogenic emissions. Climate change may further hinder progress by modifying meteorological conditions that regulate pollutant dispersion and chemistry. This study applies a modeling framework combining regional climate simulations and chemical transport models to assess the climate penalty, i.e., the adverse impact of climate-driven meteorology on air quality independent of emissions. Three scenarios were analyzed: Baseline Reference Scenario (SRB) (2011–2015), Near-Future Medium Scenario (NF) (2028–2032), and Mid-Future Medium Scenario (2048–2052), with emissions held constant. A mitigation scenario (SC_MF_2050) under the Current Legislation was also tested to accomplish the new EU Ambient Air Quality Directive. Results show that PM10 and NO2 increase under future climates, mainly due to reduced wind speed and precipitation, enhancing pollutant accumulation. Multivariate analyses confirm the strong association between stagnant conditions and higher concentrations. Even with projected emission reductions, compliance with stricter EU targets may not be achieved everywhere. Climate penalty zones, especially in lowland and transport corridors, underscore the need to integrate climate resilience into air quality planning and adopt adaptive strategies for long-term effectiveness.


  • Dynamic emission inventory of ammonia in northern Italy by machine learning

    by Alessandro Marongiu, Loris Colombo, Anna Gilia Collalto


  • Open Access

    Machine Learning Approach for Local Atmospheric Emission Predictions

    by Alessandro Marongiu, Gabriele Giuseppe Distefano, Marco Moretti, Federico Petrosino, Giuseppe Fossati, Anna Gilia Collalto, Elisabetta Angelino

    This paper presents a novel machine learning methodology able to extend the results of detailed local emission inventories to larger domains where emission estimates are not available. The first part of this work consists in the development of an emission inventory of elemental carbon (EC), black carbon (BC), organic carbon (OC), and levoglucosan (LG) obtained from the detailed emission estimates available from the Project LIFE PREPAIR for the Po Basin in north Italy. The emissions of these chemical species in combination with particulate primary emissions and gaseous precursors are very important information in source apportionment and in the impact assessment of the different emission sources in air quality. To gain a better understanding of the origins of atmospheric pollution, it is possible to combine measurements with emission estimates for the particulate matter fractions known as EC, BC, OC, and LG. To identify the sources of emissions, it is usual practice to use the ratio of the measured EC, OC, TC (Total Carbon), and LG. The PREPAIR emission estimates and these new calculations are then used to train the Random Forest (RF) algorithm, considering a large array of local variables, such as taxes, the characteristics of urbanization and dwellings, the number of employees detailed for economic activities, occupation levels and land cover. The outcome of the comparison of the predictions of the machine learning implemented model (ML) with the estimates obtained for the same areas by two independent methods, local disaggregation of the national emission inventory and Copernicus Air Modelling Service (CAMS) emissions estimates, is extremely encouraging and confirms it also as a promising approach in terms of effort saving. The implemented modelling approach identifies the most important variables affecting the spatialization of different pollutants in agreement with the main emission source characteristics and is suitable for harmonization of the results of different local emission inventories with national emission reporting.


  • Open Access

    Application of Machine Learning to Estimate Ammonia Atmospheric Emissions and Concentrations

    by Alessandro Marongiu, Anna Gilia Collalto, Gabriele Giuseppe Distefano, Elisabetta Angelino

    This paper describes an innovative method that recursively applies the machine learning Random Forest to an assumed homogeneous aerographic domain around measurement sites to predict concentrations and emissions of ammonia, an atmospheric pollutant that causes acidification and eutrophication of soil and water and contributes to secondary PM2.5. The methodology was implemented to understand the effects of weather and emission changes on atmospheric ammonia concentrations. The model was trained and tested by hourly measurements of ammonia concentrations and atmospheric turbulence parameters, starting from a constant emission scenario. The initial values of emissions were calculated based on a bottom-up emission inventory detailed at the municipal level and considering a circular area of about 4 km radius centered on measurement sites. By comparing predicted and measured concentrations for each iteration, the emissions were modified, the model’s training and testing were repeated, and the model converged to a very high performance in predicting ammonia concentrations and establishing hourly time-varying emission profiles. The ammonia concentration predictions were extremely accurate and reliable compared to the measured values. The relationship between NH3 concentrations and the calculated emissions rates is compatible with physical atmospheric turbulence parameters. The site-specific emissions profiles, estimated by the proposed methodology, clearly show a nonlinear relation with measured concentrations and allow the identification of the effect of atmospheric turbulence on pollutant accumulation. The proposed methodology is suitable for validating and confirming emission time series and defining highly accurate emission profiles for the improvement of the performances of chemical and transport models (CTMs) in combination with in situ measurements and/or optical depth from satellite observation.