Christiana Odumah Hood
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Christiana Odumah Hood has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Francis Nkrumah
University of Cape Coast School of Physical Sciences
3 shared publicationsAaron Tettey Asare
Department of Molecular Biology and Biotechnology, College of Agriculture and Natural Sciences University of Cape Coast Cape Coast Ghana
2 shared publications- Rosemond Godbless Dadzie
Department of Agricultural Engineering, School of Agricultural Sciences, College of Agriculture and Natural Sciences University of Cape Coast Cape Coast Ghana
2 shared publications Sarah Amoah
University of Cape Coast School of Biological Sciences
2 shared publicationsAaron Antwi
University of Cape Coast School of Physical Sciences
1 shared publicationAgnes Tutuwaa
Regional Water & Environmental Sanitation Center Kumasi (RWESCK) Laboratories Kwame Nkrumah University of Science and Technology (KNUST) Kumasi Ghana
1 shared publication
Latest Publications
- Open Access
- 18 November 2026
- Published by Springer Nature in Research Square
Assessment of Particulate Matter Emissions from Corn-Milling Sites in Cape Coast Metropolitan, Southern Ghana
Food milling operations in informal urban markets of Sub-Saharan Africa generate substantial particulate matter (PM) emissions, yet longitudinal, size-resolved data on PM dynamics and associated occupational health risks remain scarce for Ghanaians. A 10-month longitudinal observational study (March–December 2024) was conducted at two commercial milling markets in Cape Coast, Ghana: Kotokoroba and Kingsway. IQAir AirVisual Outdoor monitors deployed at breathing height (1.5 m) recorded PM₁, PM₂.₅, and PM₁₀ continuously at 5-minute intervals. Data were analysed using descriptive statistics, Pearson correlations, t-tests, time-series decomposition, and occupational health risk assessment (ADD and HQ) following U.S. EPA methodology. Mean PM₂.₅ were 27.0 µg/m³ (Kotokoroba) and 28.9 µg/m³ (Kingsway), exceeding the WHO 24-hour guideline (15 µg/m³) on 61% and 92% of monitored days, and the Ghana EPA standard (25 µg/m³) on 44% and 78% of days. Mean PM₁₀ of 53.5 and 57.5 µg/m³ exceeded WHO limits on 50% and 43% of days. Seasonal peaks were observed during grain milling (June–August) at Kotokoroba (~ 30 µg/m³ PM₂.₅) and spice milling (December) at Kingsway (~ 35 µg/m³ PM₂.₅). Hazard Quotients exceeded 1.0 for PM₂.₅ (1.80 and 1.93) and PM₁₀ at both sites. Strong inter-fraction correlations ( r = 0.82–0.95, p-value ≤ 0.00) confirm shared milling emission sources. PM concentrations persistently exceed national and international guidelines, posing chronic occupational health risks. Wet processing, local exhaust ventilation, and staggered milling schedules are recommended. The study highlights the need for industry-specific PM standards. Limitations include absence of chemical composition analysis, no indoor–outdoor comparison, and no humidity correction for OPC readings.
- 18 November 2026
- Published by Springer Nature in Research Square
Open AccessAssessment of Particulate Matter Emissions from Corn-Milling Sites in Cape Coast Metropolitan, Southern Ghana
Food milling operations in informal urban markets of Sub-Saharan Africa generate substantial particulate matter (PM) emissions, yet longitudinal, size-resolved data on PM dynamics and associated occupational health risks remain scarce for Ghanaians. A 10-month longitudinal observational study (March–December 2024) was conducted at two commercial milling markets in Cape Coast, Ghana: Kotokoroba and Kingsway. IQAir AirVisual Outdoor monitors deployed at breathing height (1.5 m) recorded PM₁, PM₂.₅, and PM₁₀ continuously at 5-minute intervals. Data were analysed using descriptive statistics, Pearson correlations, t-tests, time-series decomposition, and occupational health risk assessment (ADD and HQ) following U.S. EPA methodology. Mean PM₂.₅ were 27.0 µg/m³ (Kotokoroba) and 28.9 µg/m³ (Kingsway), exceeding the WHO 24-hour guideline (15 µg/m³) on 61% and 92% of monitored days, and the Ghana EPA standard (25 µg/m³) on 44% and 78% of days. Mean PM₁₀ of 53.5 and 57.5 µg/m³ exceeded WHO limits on 50% and 43% of days. Seasonal peaks were observed during grain milling (June–August) at Kotokoroba (~ 30 µg/m³ PM₂.₅) and spice milling (December) at Kingsway (~ 35 µg/m³ PM₂.₅). Hazard Quotients exceeded 1.0 for PM₂.₅ (1.80 and 1.93) and PM₁₀ at both sites. Strong inter-fraction correlations ( r = 0.82–0.95, p-value ≤ 0.00) confirm shared milling emission sources. PM concentrations persistently exceed national and international guidelines, posing chronic occupational health risks. Wet processing, local exhaust ventilation, and staggered milling schedules are recommended. The study highlights the need for industry-specific PM standards. Limitations include absence of chemical composition analysis, no indoor–outdoor comparison, and no humidity correction for OPC readings.
- Open Access
- 18 November 2026
- Published by Springer Nature in Research Square
Assessment of Particulate Matter Pollution in Mining Communities in Southwestern Ghana
This study analyzed the concentrations of PM 10 , PM 2.5 , and PM 1.0 across three distinct sites (Mile 7, Agric Hill, and Akoon) over a 6- to 9-month period to investigate the influence of local sources and meteorology using an IQAir Quality Monitor. Results revealed a consistent spatial hierarchy: Akoon, a community gold mining site, exhibited the highest concentrations (e.g., PM 10 up to 121 µg/m³), followed by Mile 7 and background Agric Hill. This confirms that local source strength is the primary determinant of pollution. Temporally, high humidity (> 87%) and stable high-pressure conditions promoted PM hygroscopic growth and atmospheric stagnation, exacerbating pollution episodes. A notable November anomaly, with peak concentrations across all sites despite favourable dispersion meteorology, demonstrating how intense emission events can overwhelm regional dispersive capacity. PM 2.5 /PM 10 and PM 1.0 /PM 2.5 ratios indicated a significant contribution from derived fine and ultrafine particles. The high PM 1.0 fraction poses a serious health risk due to its potential for systemic inflammation and extra-pulmonary effects. Three-way ANOVA showed significant effects of Month, Site, and PM Size on PM concentrations, and regression analysis indicated that temperature increased while humidity and pressure decreased PM levels, together explaining 51–62% of the variability. The study concludes that effective mitigation requires a dual strategy: stringent, source-specific controls at identified hotspots and a regional early warning system that triggers actions during forecasted meteorological stagnation and seasonal burning periods.
- 18 November 2026
- Published by Springer Nature in Research Square
Open AccessAssessment of Particulate Matter Pollution in Mining Communities in Southwestern Ghana
This study analyzed the concentrations of PM 10 , PM 2.5 , and PM 1.0 across three distinct sites (Mile 7, Agric Hill, and Akoon) over a 6- to 9-month period to investigate the influence of local sources and meteorology using an IQAir Quality Monitor. Results revealed a consistent spatial hierarchy: Akoon, a community gold mining site, exhibited the highest concentrations (e.g., PM 10 up to 121 µg/m³), followed by Mile 7 and background Agric Hill. This confirms that local source strength is the primary determinant of pollution. Temporally, high humidity (> 87%) and stable high-pressure conditions promoted PM hygroscopic growth and atmospheric stagnation, exacerbating pollution episodes. A notable November anomaly, with peak concentrations across all sites despite favourable dispersion meteorology, demonstrating how intense emission events can overwhelm regional dispersive capacity. PM 2.5 /PM 10 and PM 1.0 /PM 2.5 ratios indicated a significant contribution from derived fine and ultrafine particles. The high PM 1.0 fraction poses a serious health risk due to its potential for systemic inflammation and extra-pulmonary effects. Three-way ANOVA showed significant effects of Month, Site, and PM Size on PM concentrations, and regression analysis indicated that temperature increased while humidity and pressure decreased PM levels, together explaining 51–62% of the variability. The study concludes that effective mitigation requires a dual strategy: stringent, source-specific controls at identified hotspots and a regional early warning system that triggers actions during forecasted meteorological stagnation and seasonal burning periods.
- Open Access
- 23 February 2026
- Published by Wiley in Starch - Stärke
- Vol. 78 (2)
Characterization of Starch From Four Cassava Varieties Using Fourier Transform Infrared Spectroscopy, Powder x‐ray Diffraction, and Scanning Electron Microscopy
Cassava ( Manihot esculenta Crantz) is an important crop for food security in tropical and subtropical regions as it is an important source of starch. However, the physicochemical, morphological, and structural properties of cassava starch vary significantly among cultivars, which affects its functional applications in food, pharmaceutical, and industrial sectors. In this study, the physico‐chemical, morphological, and structural properties of starch samples extracted from four different cassava varieties were studied. x‐ray powder diffraction analyses showed that the cassava samples possess A‐type starch with crystallinities ranging from 27.41 ± 3.35% to 28.85 ± 2.20% and crystallite sizes of 10.08 ± 1.15 nm to 11.41 ± 1.33 nm. FTIR analyses also revealed important functional groups that are present in starch macromolecules. Scanning electron microscope (SEM) images showed a spherical granular morphology. The energy dispersive x‐ray analysis (EDX) data showed that the starch samples were predominantly composed of carbon and oxygen atoms by weight. The swelling power and water solubility index assessment show a competitive advantage for use in industries such as pharmaceuticals, food, and cosmetics.
- 23 February 2026
- Published by Wiley in Starch - Stärke
- Vol. 78 (2)
Open AccessCharacterization of Starch From Four Cassava Varieties Using Fourier Transform Infrared Spectroscopy, Powder x‐ray Diffraction, and Scanning Electron Microscopy
Cassava ( Manihot esculenta Crantz) is an important crop for food security in tropical and subtropical regions as it is an important source of starch. However, the physicochemical, morphological, and structural properties of cassava starch vary significantly among cultivars, which affects its functional applications in food, pharmaceutical, and industrial sectors. In this study, the physico‐chemical, morphological, and structural properties of starch samples extracted from four different cassava varieties were studied. x‐ray powder diffraction analyses showed that the cassava samples possess A‐type starch with crystallinities ranging from 27.41 ± 3.35% to 28.85 ± 2.20% and crystallite sizes of 10.08 ± 1.15 nm to 11.41 ± 1.33 nm. FTIR analyses also revealed important functional groups that are present in starch macromolecules. Scanning electron microscope (SEM) images showed a spherical granular morphology. The energy dispersive x‐ray analysis (EDX) data showed that the starch samples were predominantly composed of carbon and oxygen atoms by weight. The swelling power and water solubility index assessment show a competitive advantage for use in industries such as pharmaceuticals, food, and cosmetics.
- Open Access
- 19 August 2025
- Published by Wiley in Legume Science
- Vol. 7 (3)
Effects of Sprouting and Fermentation on the Physicochemical Properties and Nutritional Composition of Cowpea Flour, and Consumer Acceptability of Composite Doughnuts Made Thereof
The widespread demand for cowpea in Ghana and West Africa warrants not only the development of climate‐resilient varieties to enhance yield and ensure sustainable supply but also to remove limitations, such as the beany aroma, that restricts its use for food. In this study, various processing methods: sprouting (S), fermentation (F), and a combination of sprouting and fermentation (S + F), were assessed for reducing the beany aroma of cowpea. For this, an advanced climate‐smart cowpea breeding line, UCC15‐03, was used. Composite flour comprising wheat and the control or treated cowpea flours were prepared, used to make doughnuts, and the nutritional quality and consumer acceptability assessed. The flour from the S + F process showed the highest protein content (35.65 ± 0.25 g/100 g), followed by the S (32.26 ± 0.06 g/100 g), F (31.03 ± 0.03 g/100 g), and the control (24.91 ± 0.02 g/100 g). Processing significantly decreased the content of hexanal, which contributes to the beany flavor, from 44.41 ± 0.67 μg/100 g (control) to 24.36 ± 2.40 μg/100 g (S), 19.52 ± 0.18 μg/100 g (F), and 14.40 ± 0.66 μg/100 g (S + F). All the treatments decreased the oxalate, tannins, flavonoids, and polyphenolic contents as well as the crystallization and decomposition temperatures. Sensory evaluation revealed a higher preference for doughnuts made from the fermented cowpea, which had particulate, rough, and brown characteristics than the control, which showed beany, sweet, and gritty attributes. This demonstrates the potential for using fermentation to decrease the beany flavor, to enhance the utilization of cowpea in novel products.
- 19 August 2025
- Published by Wiley in Legume Science
- Vol. 7 (3)
Open AccessEffects of Sprouting and Fermentation on the Physicochemical Properties and Nutritional Composition of Cowpea Flour, and Consumer Acceptability of Composite Doughnuts Made Thereof
The widespread demand for cowpea in Ghana and West Africa warrants not only the development of climate‐resilient varieties to enhance yield and ensure sustainable supply but also to remove limitations, such as the beany aroma, that restricts its use for food. In this study, various processing methods: sprouting (S), fermentation (F), and a combination of sprouting and fermentation (S + F), were assessed for reducing the beany aroma of cowpea. For this, an advanced climate‐smart cowpea breeding line, UCC15‐03, was used. Composite flour comprising wheat and the control or treated cowpea flours were prepared, used to make doughnuts, and the nutritional quality and consumer acceptability assessed. The flour from the S + F process showed the highest protein content (35.65 ± 0.25 g/100 g), followed by the S (32.26 ± 0.06 g/100 g), F (31.03 ± 0.03 g/100 g), and the control (24.91 ± 0.02 g/100 g). Processing significantly decreased the content of hexanal, which contributes to the beany flavor, from 44.41 ± 0.67 μg/100 g (control) to 24.36 ± 2.40 μg/100 g (S), 19.52 ± 0.18 μg/100 g (F), and 14.40 ± 0.66 μg/100 g (S + F). All the treatments decreased the oxalate, tannins, flavonoids, and polyphenolic contents as well as the crystallization and decomposition temperatures. Sensory evaluation revealed a higher preference for doughnuts made from the fermented cowpea, which had particulate, rough, and brown characteristics than the control, which showed beany, sweet, and gritty attributes. This demonstrates the potential for using fermentation to decrease the beany flavor, to enhance the utilization of cowpea in novel products.
- Open Access
- 1 January 2024
- Published by Wiley in Indoor Air
- Vol. 2024 (1)
Indoor Radon Monitoring in Building Types of a Periurban Area in Cape Coast Metropolis, Southern Ghana
Radon is a source of ionizing radiation that shows a carcinogenic potential. Thus, tracking radon exposure levels in the environment and managing exposure conditions is necessary for reducing the hazards such as lung cancer, which is known to be the second largest impact of radon on humans worldwide. A LR‐115 Type II strippable detector for monitoring radon radiation was installed in 30 mud and 26 block houses in the periurban (Duakor) areas in the Cape Coast Metropolis, Central Region, for 3 months to determine the exposure levels. The results showed that block houses (n = 26) had a radon ionization concentration in a range of 125–356 Bq m−3 and mean of 221 ± 61.4 Bq m−3, which was significantly higher than that of mud houses (n = 30), which ranged from 50.8 to 349 Bq m−3, with a mean of 186 ± 13.3 Bq m−3. About 80% and 10% of both types of houses showed levels that were above WHO’s lower (100 Bq m−3) and upper (300 Bq m−3) limits of the annual residential guidelines. Moreover, over 70% of both building types showed annual effective doses of indoor radon levels that were within the action levels (3–10 mSv year−1). The data shows that the occupants have lived in their apartments for more than 10 years, while only about 3.0% have ever received some education on radon. Additional steps to manage indoor radon exposure in the community to avoid lung cancer are necessary.
- 1 January 2024
- Published by Wiley in Indoor Air
- Vol. 2024 (1)
Open AccessIndoor Radon Monitoring in Building Types of a Periurban Area in Cape Coast Metropolis, Southern Ghana
Radon is a source of ionizing radiation that shows a carcinogenic potential. Thus, tracking radon exposure levels in the environment and managing exposure conditions is necessary for reducing the hazards such as lung cancer, which is known to be the second largest impact of radon on humans worldwide. A LR‐115 Type II strippable detector for monitoring radon radiation was installed in 30 mud and 26 block houses in the periurban (Duakor) areas in the Cape Coast Metropolis, Central Region, for 3 months to determine the exposure levels. The results showed that block houses (n = 26) had a radon ionization concentration in a range of 125–356 Bq m−3 and mean of 221 ± 61.4 Bq m−3, which was significantly higher than that of mud houses (n = 30), which ranged from 50.8 to 349 Bq m−3, with a mean of 186 ± 13.3 Bq m−3. About 80% and 10% of both types of houses showed levels that were above WHO’s lower (100 Bq m−3) and upper (300 Bq m−3) limits of the annual residential guidelines. Moreover, over 70% of both building types showed annual effective doses of indoor radon levels that were within the action levels (3–10 mSv year−1). The data shows that the occupants have lived in their apartments for more than 10 years, while only about 3.0% have ever received some education on radon. Additional steps to manage indoor radon exposure in the community to avoid lung cancer are necessary.
- 22 April 2023
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 195 (5) , 1-20
Spatial distribution of Hg in Pra River Basin, Southwestern Ghana using HF acid combination method
The study assessed the spatial distribution of total mercury (THg) in soils, sediments, mining wastes, and Au-rich Hg-contaminated tailings from artisanal and small-scale gold mining (ASGM) from Offin, Lower and Upper Pra, Birim, and Anum Rivers, Pra River Basin, Southwestern Ghana. THg measurement using Cold Vapor Atomic Absorption Spectrometry (CVAAS) after acid digestion with HNO3/HCl/HF and k0-INAA, as a reference method, and both provided comparable results. A digestion method, HNO3/HClO2/H2SO4 acid mixture before CVAAS provided lower results, which indicates that the use of HF is of fundamental importance in THg analysis based on acid digestion and its omission may significantly underestimate the presence of Hg in soils and sediments. THg in soils, sediments, Au-rich Hg-contaminated tailings, and mining wastes from the river basin were liberated into a solution for measurement using HNO3/HCl/HF. The study revealed Offin and Lower Pra Rivers showed high distribution (ranges; mg Hg kg−1) of THg in soils (103–770) and sediments (0.20–20.8), respectively; Upper Pra and Anum rivers showed the lowest THg in soils (2.20–3.20) and sediments (0.004–0.02), respectively. About 76.0% of THg in sediments was lower than the USEPA guideline of 0.2 mg Hg kg−1. The highest mean THg (mg Hg kg−1) in Au-rich Hg-contaminated tailings (1673 ± 4.8, n = 4) and mining wastes (17.3–21.5) were from the river Offin. The study showed Offin (Dunkwa-on-Offin site 1) and Lower Pra (Beposo Township) rivers are Hg hotspots that need attention.
- 22 April 2023
- Published by Springer Nature in Environmental Monitoring and Assessment
- Vol. 195 (5) , 1-20
Spatial distribution of Hg in Pra River Basin, Southwestern Ghana using HF acid combination method
The study assessed the spatial distribution of total mercury (THg) in soils, sediments, mining wastes, and Au-rich Hg-contaminated tailings from artisanal and small-scale gold mining (ASGM) from Offin, Lower and Upper Pra, Birim, and Anum Rivers, Pra River Basin, Southwestern Ghana. THg measurement using Cold Vapor Atomic Absorption Spectrometry (CVAAS) after acid digestion with HNO3/HCl/HF and k0-INAA, as a reference method, and both provided comparable results. A digestion method, HNO3/HClO2/H2SO4 acid mixture before CVAAS provided lower results, which indicates that the use of HF is of fundamental importance in THg analysis based on acid digestion and its omission may significantly underestimate the presence of Hg in soils and sediments. THg in soils, sediments, Au-rich Hg-contaminated tailings, and mining wastes from the river basin were liberated into a solution for measurement using HNO3/HCl/HF. The study revealed Offin and Lower Pra Rivers showed high distribution (ranges; mg Hg kg−1) of THg in soils (103–770) and sediments (0.20–20.8), respectively; Upper Pra and Anum rivers showed the lowest THg in soils (2.20–3.20) and sediments (0.004–0.02), respectively. About 76.0% of THg in sediments was lower than the USEPA guideline of 0.2 mg Hg kg−1. The highest mean THg (mg Hg kg−1) in Au-rich Hg-contaminated tailings (1673 ± 4.8, n = 4) and mining wastes (17.3–21.5) were from the river Offin. The study showed Offin (Dunkwa-on-Offin site 1) and Lower Pra (Beposo Township) rivers are Hg hotspots that need attention.