Fariba Farrokh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fariba Farrokh has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Hossein Torkaman
Faculty of Electrical Engineering, Shahid Beheshti University, Tehran, Iran
6 shared publications - Abolfazl Vahedi
Department of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran
5 shared publications - Mahdi Banejad
Shahrood University of Technology
3 shared publications - Ali Jafer Mahdi
College of Information Technology Engineering, Al-Zahraa University for Women, Karbala, Iraq
2 shared publications Mostafa Shabanpour
Department of Electrical Engineering, Iran University of Science and Technology (IUST), Tehran, Iran
2 shared publicationsVahid Zamani Faradonbeh
2 shared publications
Latest Publications
- Open Access
- 16 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 27059-27071
Analytical Modeling of Interior Permanent Magnet Machines With Auxiliary Notch Rotor
This paper introduces a two-dimensional (2-D) analytical model to predict the performance characteristics of interior permanent magnet (IPM) machines with arbitrary rotor geometry (e.g., auxiliary notch rotor and sinusoidal PM shape). The absence of cylindrical symmetry in such complex rotor structures with auxiliary notch rotor core and rectangular-shaped interior permanent magnets (PMs) poses challenges for solving 2-D boundary conditions and developing the analytical model. To address this issue interior PMs are first mapped to the rotor surface and replaced by sin-shaped PMs. In other words, the original IPM machine with auxiliary notch rotor is transformed into a surface mounted PM machine. Next, sin-shaped PMs are segmented into a number of small pieces to form cylindrical symmetry along the angular length of each piece. Finally, 2-D Maxwell equations are discretely solved in each segment and summated to calculate the resultant flux distribution. Meanwhile, the effects of stator slot’s are modeled with magnetizing current. The accuracy of analytical results are verified by Finite Element (FE), and experimental tests on the motor prototype.
- 16 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 27059-27071
Open AccessAnalytical Modeling of Interior Permanent Magnet Machines With Auxiliary Notch Rotor
This paper introduces a two-dimensional (2-D) analytical model to predict the performance characteristics of interior permanent magnet (IPM) machines with arbitrary rotor geometry (e.g., auxiliary notch rotor and sinusoidal PM shape). The absence of cylindrical symmetry in such complex rotor structures with auxiliary notch rotor core and rectangular-shaped interior permanent magnets (PMs) poses challenges for solving 2-D boundary conditions and developing the analytical model. To address this issue interior PMs are first mapped to the rotor surface and replaced by sin-shaped PMs. In other words, the original IPM machine with auxiliary notch rotor is transformed into a surface mounted PM machine. Next, sin-shaped PMs are segmented into a number of small pieces to form cylindrical symmetry along the angular length of each piece. Finally, 2-D Maxwell equations are discretely solved in each segment and summated to calculate the resultant flux distribution. Meanwhile, the effects of stator slot’s are modeled with magnetizing current. The accuracy of analytical results are verified by Finite Element (FE), and experimental tests on the motor prototype.
- Open Access
- 30 January 2026
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- p. 1–9
Multi-Objective Optimization of a Rectangular Structured Linear, Actuator Based on Taguchi Method
This paper introduces an innovative rectangular structured Linear Oscillating Machine (LOM) featuring an innovative arrangement of permanent magnets (PMs) which are positioned on the mover. A sinusoidal magnet arrangement (SMA) is chosen to minimize PM materials while ensuring the performance parameter, in terms of electromagnetic force, remains unaffected. The focus of the design is to reduce the cogging force and enhance the electromagnetic force to the PM mass ratio. The optimization is accomplished by utilizing design-of-experiment (DOE) Taguchi method optimization for a linear actuator, along with the finite element method (FEM). A multi-objective optimization approach is employed to refine the parameters of the linear actuator, focusing on the maximum force, the force-to-PM-weight ratio, and minimizing cogging force. By identifying the most effective parameters, an appropriate case with high sensitivity and accuracy is selected. The output parameters, like electromagnetic force and stroke of the proposed optimization approach, score very well, while the design is simply structured due to the utilization of a rectangular structured core part. The proposed design significantly reduces the cogging force to an exceptionally low level, enhancing performance and reliability.
- 30 January 2026
- Published by River Publishers in Applied Computational Electromagnetics Society Journal (ACES)
- p. 1–9
Open AccessMulti-Objective Optimization of a Rectangular Structured Linear, Actuator Based on Taguchi Method
This paper introduces an innovative rectangular structured Linear Oscillating Machine (LOM) featuring an innovative arrangement of permanent magnets (PMs) which are positioned on the mover. A sinusoidal magnet arrangement (SMA) is chosen to minimize PM materials while ensuring the performance parameter, in terms of electromagnetic force, remains unaffected. The focus of the design is to reduce the cogging force and enhance the electromagnetic force to the PM mass ratio. The optimization is accomplished by utilizing design-of-experiment (DOE) Taguchi method optimization for a linear actuator, along with the finite element method (FEM). A multi-objective optimization approach is employed to refine the parameters of the linear actuator, focusing on the maximum force, the force-to-PM-weight ratio, and minimizing cogging force. By identifying the most effective parameters, an appropriate case with high sensitivity and accuracy is selected. The output parameters, like electromagnetic force and stroke of the proposed optimization approach, score very well, while the design is simply structured due to the utilization of a rectangular structured core part. The proposed design significantly reduces the cogging force to an exceptionally low level, enhancing performance and reliability.
- Open Access
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 20 (1)
Analytical Modelling and Performance of an Axial Flux Hysteresis Motor With High‐Power Factor and High‐Efficiency
This paper presents the dynamic and transient modelling and analysis of an axial flux hysteresis motor (AFHM) aimed at improving the low efficiency and poor power factor of conventional hysteresis motors. Although conventional hysteresis motors offer advantages such as simple structure and smooth operation, they typically suffer from low torque capability, limited efficiency and poor power factor due to magnetic losses in the core materials. To address these drawbacks, an analytical dynamic model of the AFHM is developed to investigate its behaviour under loading, unloading and starting conditions, as well as during steady‐state operation. The model is implemented in MATLAB/SIMULINK, where the hysteresis characteristics are represented by an elliptical approximation of the B–H loop, and the equivalent circuit parameters are obtained at synchronous speed. In addition, the analytical results are validated and compared with finite element method (FEM) simulations to ensure the accuracy of the proposed model. The comparison confirms close agreement in terms of stator current, electromagnetic torque and rotor speed. The results show that adjusting the supply voltage can significantly improve the efficiency, power factor and operational stability of the AFHM.
- 1 January 2026
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 20 (1)
Open AccessAnalytical Modelling and Performance of an Axial Flux Hysteresis Motor With High‐Power Factor and High‐Efficiency
This paper presents the dynamic and transient modelling and analysis of an axial flux hysteresis motor (AFHM) aimed at improving the low efficiency and poor power factor of conventional hysteresis motors. Although conventional hysteresis motors offer advantages such as simple structure and smooth operation, they typically suffer from low torque capability, limited efficiency and poor power factor due to magnetic losses in the core materials. To address these drawbacks, an analytical dynamic model of the AFHM is developed to investigate its behaviour under loading, unloading and starting conditions, as well as during steady‐state operation. The model is implemented in MATLAB/SIMULINK, where the hysteresis characteristics are represented by an elliptical approximation of the B–H loop, and the equivalent circuit parameters are obtained at synchronous speed. In addition, the analytical results are validated and compared with finite element method (FEM) simulations to ensure the accuracy of the proposed model. The comparison confirms close agreement in terms of stator current, electromagnetic torque and rotor speed. The results show that adjusting the supply voltage can significantly improve the efficiency, power factor and operational stability of the AFHM.
- Open Access
- 29 November 2025
- Published by Elsevier in Results in Engineering
- Vol. 29
A 3D analytical model of rotor-excited axial flux switching machine based on MEC and an accurate mapping approach
- 29 November 2025
- Published by Elsevier in Results in Engineering
- Vol. 29
Open AccessA 3D analytical model of rotor-excited axial flux switching machine based on MEC and an accurate mapping approach
- Open Access
- 11 September 2025
- Published by Elsevier in Results in Engineering
- Vol. 28
Robust hybrid optimization design for axial flux-switching transverse-flux permanent magnet wind generator
- 11 September 2025
- Published by Elsevier in Results in Engineering
- Vol. 28
Open AccessRobust hybrid optimization design for axial flux-switching transverse-flux permanent magnet wind generator
- Open Access
Enhanced Interior PMSM Design for Electric Vehicles Using Ship-Shaped Notching and Advanced Optimization Algorithms
This paper compares two types of interior permanent magnet synchronous motors (IPMSMs) to determine the most effective arrangement for electric vehicle (EV) applications. The comparison is based on torque ripple, power, efficiency, and mechanical objectives. The study introduces a novel technique that optimizes notching parameters in a selected motor topology by inserting a ship-shaped notch into the bridge area between double U-shaped layers. In addition, this study presents two comprehensive approaches of robust combinatorial optimization that are used in machines for the first time. In the first approach, modeling is performed to identify important variables using Pearson Correlation and the mathematical model of the Anisotropic Kriging model from the Surrogate model. Then, in the second approach, the proposed algorithm, Multi-Objective Genetics Algorithm (MOGA), and Surrogate Quadratic Programming (SQP) are combined and implemented on the Anisotropic Kriging model to choose a robust model with minimum error. The algorithm is then verified with FEM results and compared with other conventional optimization algorithms, such as the Genetics Algorithm (GA) and the Particle Swarm Optimization algorithm (PSO). The motor characteristics are analyzed using the Finite Element Method (FEM) and global map analysis to optimize the performance of the IPMSM for EV applications. A comparative study shows that the enhanced PMSM developed through the optimization process demonstrates superior performance indices for EVs.
Open AccessEnhanced Interior PMSM Design for Electric Vehicles Using Ship-Shaped Notching and Advanced Optimization Algorithms
This paper compares two types of interior permanent magnet synchronous motors (IPMSMs) to determine the most effective arrangement for electric vehicle (EV) applications. The comparison is based on torque ripple, power, efficiency, and mechanical objectives. The study introduces a novel technique that optimizes notching parameters in a selected motor topology by inserting a ship-shaped notch into the bridge area between double U-shaped layers. In addition, this study presents two comprehensive approaches of robust combinatorial optimization that are used in machines for the first time. In the first approach, modeling is performed to identify important variables using Pearson Correlation and the mathematical model of the Anisotropic Kriging model from the Surrogate model. Then, in the second approach, the proposed algorithm, Multi-Objective Genetics Algorithm (MOGA), and Surrogate Quadratic Programming (SQP) are combined and implemented on the Anisotropic Kriging model to choose a robust model with minimum error. The algorithm is then verified with FEM results and compared with other conventional optimization algorithms, such as the Genetics Algorithm (GA) and the Particle Swarm Optimization algorithm (PSO). The motor characteristics are analyzed using the Finite Element Method (FEM) and global map analysis to optimize the performance of the IPMSM for EV applications. A comparative study shows that the enhanced PMSM developed through the optimization process demonstrates superior performance indices for EVs.
- Open Access
- 1 January 2025
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 19 (1)
2‐D Electromagnetic Analysis Coupled With 3‐D Thermal Analysis of a Dual‐PM Excited Flux‐Switching Generator With Overhang Structure for Direct Drive Wind Turbines
This study introduces a new outer‐rotor dual‐permanent magnet (PM) excited flux‐switching generator with an overhang structure for direct‐drive wind turbine applications. The proposed generator incorporates flux barriers and ferrite PMs in the stator while utilising neodymium PMs in the rotor segments. Contrary to ferrite PMs, neodymium PMs are prone to demagnetisation in high‐temperature conditions. Given that the operating temperature of the stator is nearly double that of the rotor in this study, ferrite PMs are strategically positioned in the stator to mitigate this issue. The main goal of this paper is to provide a fast and accurate method to study the electromagnetic‐thermal performance of the generator. Hence, a two‐dimensional finite element analysis (2‐D FEA) electromagnetic analysis is coupled with a 3‐D FEA thermal analysis. Moreover, a precise thermal circuit of each generator's element is displayed. Finally, the accuracy of the method is confirmed through a comparison of the simulation results with experimental data, indicating a small margin of error.
- 1 January 2025
- Published by Institution of Engineering and Technology (IET) in IET Electric Power Applications
- Vol. 19 (1)
Open Access2‐D Electromagnetic Analysis Coupled With 3‐D Thermal Analysis of a Dual‐PM Excited Flux‐Switching Generator With Overhang Structure for Direct Drive Wind Turbines
This study introduces a new outer‐rotor dual‐permanent magnet (PM) excited flux‐switching generator with an overhang structure for direct‐drive wind turbine applications. The proposed generator incorporates flux barriers and ferrite PMs in the stator while utilising neodymium PMs in the rotor segments. Contrary to ferrite PMs, neodymium PMs are prone to demagnetisation in high‐temperature conditions. Given that the operating temperature of the stator is nearly double that of the rotor in this study, ferrite PMs are strategically positioned in the stator to mitigate this issue. The main goal of this paper is to provide a fast and accurate method to study the electromagnetic‐thermal performance of the generator. Hence, a two‐dimensional finite element analysis (2‐D FEA) electromagnetic analysis is coupled with a 3‐D FEA thermal analysis. Moreover, a precise thermal circuit of each generator's element is displayed. Finally, the accuracy of the method is confirmed through a comparison of the simulation results with experimental data, indicating a small margin of error.
- Open Access
- 1 January 2025
- Published by Institution of Engineering and Technology (IET) in IET Electrical Systems in Transportation
- Vol. 2025 (1)
Design and Hybrid Analytical Model for Interior Permanent Magnet Generator in an Electric Vehicle Auxiliary Power Unit Application
This study discusses a brushless permanent magnet (PM) generator. A high‐efficiency interior PM (IPM) generator has been designed. It is suggested to use a three‐phase, 12‐/10‐pole generator for the auxiliary power unit application. In this regard, to compute the components of the flux density distribution in the air gap of an IPM generator, a hybrid analytical model is employed. The unique aspects of this work include the development of a 2‐dimensional (2‐D) analytical method to determine the air gap magnetic flux density in the IPM generator, as well as the first‐ever replacement of the stator slot with surface currents without the need for a repetitive loop. The rotor body bore receives 1‐dimensional (1‐D) analytical IPMs first transferred using the magnetic equivalent circuit (MEC) model. After that, the 2‐D analysis is modified to take the stator slot’s impacts into account by adding virtual surface currents (VSCs). Using boundary conditions and the Laplace/Poisson equations, the radial and tangential flux components of the flux density distribution in the air gap IPM generator were computed. The suggested method and the acquired findings have been validated by the finite element method (FEM), analytical model, and experimental results, indicating that the IPM generator is a promising option for electric vehicle (EV) auxiliary power unit applications.
- 1 January 2025
- Published by Institution of Engineering and Technology (IET) in IET Electrical Systems in Transportation
- Vol. 2025 (1)
Open AccessDesign and Hybrid Analytical Model for Interior Permanent Magnet Generator in an Electric Vehicle Auxiliary Power Unit Application
This study discusses a brushless permanent magnet (PM) generator. A high‐efficiency interior PM (IPM) generator has been designed. It is suggested to use a three‐phase, 12‐/10‐pole generator for the auxiliary power unit application. In this regard, to compute the components of the flux density distribution in the air gap of an IPM generator, a hybrid analytical model is employed. The unique aspects of this work include the development of a 2‐dimensional (2‐D) analytical method to determine the air gap magnetic flux density in the IPM generator, as well as the first‐ever replacement of the stator slot with surface currents without the need for a repetitive loop. The rotor body bore receives 1‐dimensional (1‐D) analytical IPMs first transferred using the magnetic equivalent circuit (MEC) model. After that, the 2‐D analysis is modified to take the stator slot’s impacts into account by adding virtual surface currents (VSCs). Using boundary conditions and the Laplace/Poisson equations, the radial and tangential flux components of the flux density distribution in the air gap IPM generator were computed. The suggested method and the acquired findings have been validated by the finite element method (FEM), analytical model, and experimental results, indicating that the IPM generator is a promising option for electric vehicle (EV) auxiliary power unit applications.
- Open Access
- 19 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 102579-102591
Demagnetization and Fault-Tolerance Analysis in Dual-Stator Axial-Field Flux-Switching Permanent Magnet Motor
The increasing concerns surrounding demagnetization risk and fault tolerance in direct-drive in-wheel motor applications prompt a detailed investigation. This paper delves into the demagnetization risk of Permanent Magnets (PM) and fault tolerance for three motor topologies sharing similar characteristics: diameter, volume, output power, and the number of PMs. The three configurations, namely the Internal Single Teeth Rotor (ISTR), Internal Dual Yoke Rotor (IDYR), and External Dual Yoke Rotor (EDYR), are thoroughly analyzed under various operating conditions, providing a comprehensive comparison from the perspectives of PM demagnetization risk and fault tolerance. The analysis encompasses eccentricity rotor fault examinations to assess fault tolerance, thermal analysis to evaluate thermal performance, and an all-encompassing demagnetization assessment under diverse operating conditions for these three topologies. The findings are substantiated through rigorous 3-D finite element method (FEM) validation.
- 19 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 102579-102591
Open AccessDemagnetization and Fault-Tolerance Analysis in Dual-Stator Axial-Field Flux-Switching Permanent Magnet Motor
The increasing concerns surrounding demagnetization risk and fault tolerance in direct-drive in-wheel motor applications prompt a detailed investigation. This paper delves into the demagnetization risk of Permanent Magnets (PM) and fault tolerance for three motor topologies sharing similar characteristics: diameter, volume, output power, and the number of PMs. The three configurations, namely the Internal Single Teeth Rotor (ISTR), Internal Dual Yoke Rotor (IDYR), and External Dual Yoke Rotor (EDYR), are thoroughly analyzed under various operating conditions, providing a comprehensive comparison from the perspectives of PM demagnetization risk and fault tolerance. The analysis encompasses eccentricity rotor fault examinations to assess fault tolerance, thermal analysis to evaluate thermal performance, and an all-encompassing demagnetization assessment under diverse operating conditions for these three topologies. The findings are substantiated through rigorous 3-D finite element method (FEM) validation.
- 18 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (8) , 1-12
Fast 2-D Analytical Model for Axial-Field Flux-Switching Bar-Permanent Magnet Motor
This study introduces a novel hybrid modeling approach that combines magnetic equivalent circuit (MEC) and two-dimensional (2-D) analytical methods. The proposed method involves placing PMs on the stator bore in two forms: virtual permanent magnets (VPMs) or virtual volume currents (VVCs). To account for the effect of rotor teeth, analytical modeling is completed using virtual surface currents (VSCs). This hybrid modeling approach enables the calculation of the air gap magnetic flux density for the first time in an axial-field flux-switching bar-permanent magnet (AFFSBPM) motor. Because of the stator’s inner PM and doubly salient nature, the 2-D analytical model for AFFSBPMs is more difficult to solve. Therefore, the proposed method accurately with fast 2-D analytical by The Laplace/Poisson equations are solved and boundary conditions are applied to calculate the tangential and vertical flux components of the flux density distribution in the air-gap AFFSBPM motor. The 3-D finite element method (FEM) is used to verify the proposed method and the findings obtained.
- 18 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 60 (8) , 1-12
Fast 2-D Analytical Model for Axial-Field Flux-Switching Bar-Permanent Magnet Motor
This study introduces a novel hybrid modeling approach that combines magnetic equivalent circuit (MEC) and two-dimensional (2-D) analytical methods. The proposed method involves placing PMs on the stator bore in two forms: virtual permanent magnets (VPMs) or virtual volume currents (VVCs). To account for the effect of rotor teeth, analytical modeling is completed using virtual surface currents (VSCs). This hybrid modeling approach enables the calculation of the air gap magnetic flux density for the first time in an axial-field flux-switching bar-permanent magnet (AFFSBPM) motor. Because of the stator’s inner PM and doubly salient nature, the 2-D analytical model for AFFSBPMs is more difficult to solve. Therefore, the proposed method accurately with fast 2-D analytical by The Laplace/Poisson equations are solved and boundary conditions are applied to calculate the tangential and vertical flux components of the flux density distribution in the air-gap AFFSBPM motor. The 3-D finite element method (FEM) is used to verify the proposed method and the findings obtained.