Yulin Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yulin Wang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Yingjie Wei
School of Astronautics, Harbin Institute of Technology , Harbin 150001
6 shared publications - Cong Wang
Harbin Institute of Technology
5 shared publications Fuchen Wang
2 shared publicationsCong Wang
1 shared publicationGuilin Wang
School of Astronautics, Harbin Institute of Technology, Harbin 150001, China
1 shared publicationJiawen Yin
1 shared publication
Latest Publications
- 4 February 2025
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 186
Study on cavity evolution of asynchronous parallel high-speed vertical water entry of cylinders
- 4 February 2025
- Published by Elsevier in International Journal of Multiphase Flow
- Vol. 186
Study on cavity evolution of asynchronous parallel high-speed vertical water entry of cylinders
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Experimental study on the collapse of partially immersed axisymmetric granular columns
An experimental study on the collapse of partially immersed granular columns is investigated, mainly considering the effects of aspect ratio and water depth on the granular dynamic and final deposit. According to the dimensionless time of collapse, two asymptotic regimes of the partially immersed granular column collapse were found, which are a regime similar to the free fall flow regime and a regime similar to the completely immersed inertial flow regime. Due to the incomplete impregnation of the granular materials and the evolution of the free fluid surface, the fluid resistance generated by the fluid covering the granular materials surface was discovered, which led to the difference between the partially immersed case and the completely dry or immersed case. In addition, we analyze the effect of water depth on the dynamics of granular collapse and deposit properties. Finally, a prediction model for the final runout distance of partially immersed granular collapse in relation to the water depth and aspect ratio was established and validated with the experimental data.
- 1 January 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Experimental study on the collapse of partially immersed axisymmetric granular columns
An experimental study on the collapse of partially immersed granular columns is investigated, mainly considering the effects of aspect ratio and water depth on the granular dynamic and final deposit. According to the dimensionless time of collapse, two asymptotic regimes of the partially immersed granular column collapse were found, which are a regime similar to the free fall flow regime and a regime similar to the completely immersed inertial flow regime. Due to the incomplete impregnation of the granular materials and the evolution of the free fluid surface, the fluid resistance generated by the fluid covering the granular materials surface was discovered, which led to the difference between the partially immersed case and the completely dry or immersed case. In addition, we analyze the effect of water depth on the dynamics of granular collapse and deposit properties. Finally, a prediction model for the final runout distance of partially immersed granular collapse in relation to the water depth and aspect ratio was established and validated with the experimental data.
- 1 December 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (12)
Experimental study on the trajectory characteristics of cylinders during asynchronous parallel high-speed vertical water entry
This study conducted asynchronous parallel high-speed vertical water entry experiments, acquiring trajectory for dual cylinders under varying lateral spacings and time intervals. The findings reveal that instability and tail slap phenomena are predominantly observed within the range of dimensionless time intervals less than 1 for the first cylinder. Instability manifests primarily as rotational instability. During the clockwise rotation of the first cylinder, the deflection angle exhibits an inverse relationship with the increasing time interval. When the first cylinder rotates anticlockwise, the deflection angle is proportional to the increase in the time interval. Regarding the second cylinder, the instability manifests primarily in three forms: collision instability, pressure difference instability, and puncture instability. As both lateral spacing and time interval increase, the second cylinder exhibits enhanced ballistic stability, concomitant with a diminished likelihood of tail slap occurrence. While the puncture process contributes to drag reduction for the second cylinder, it simultaneously introduces unpredictable forces acting upon the cylinder, potentially inducing instability. Furthermore, this study delineates the critical conditions of lateral spacings, and time intervals associated with the onset of puncture instability in the second cylinder. The research further revealed that the second cylinder consistently exhibits a lower drag coefficient than the first one, with a reduction of approximately 6.3%. Notably, during the puncture phenomenon of the second cylinder, the drag coefficient experiences its maximum reduction, decreasing by approximately 56.6%.
- 1 December 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (12)
Experimental study on the trajectory characteristics of cylinders during asynchronous parallel high-speed vertical water entry
This study conducted asynchronous parallel high-speed vertical water entry experiments, acquiring trajectory for dual cylinders under varying lateral spacings and time intervals. The findings reveal that instability and tail slap phenomena are predominantly observed within the range of dimensionless time intervals less than 1 for the first cylinder. Instability manifests primarily as rotational instability. During the clockwise rotation of the first cylinder, the deflection angle exhibits an inverse relationship with the increasing time interval. When the first cylinder rotates anticlockwise, the deflection angle is proportional to the increase in the time interval. Regarding the second cylinder, the instability manifests primarily in three forms: collision instability, pressure difference instability, and puncture instability. As both lateral spacing and time interval increase, the second cylinder exhibits enhanced ballistic stability, concomitant with a diminished likelihood of tail slap occurrence. While the puncture process contributes to drag reduction for the second cylinder, it simultaneously introduces unpredictable forces acting upon the cylinder, potentially inducing instability. Furthermore, this study delineates the critical conditions of lateral spacings, and time intervals associated with the onset of puncture instability in the second cylinder. The research further revealed that the second cylinder consistently exhibits a lower drag coefficient than the first one, with a reduction of approximately 6.3%. Notably, during the puncture phenomenon of the second cylinder, the drag coefficient experiences its maximum reduction, decreasing by approximately 56.6%.
- 1 May 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
Experimental study on synchronous high-speed vertical water entry of cylinders
This paper studied the synchronous parallel high-speed vertical water entry of cylinders through experimental methods. The study found that the double cavity exhibited favorable symmetry characteristics during the synchronous parallel vertical water entry of cylinders at the same speed. The outside of the double cavity develops freely, consistent with the single cavity. The lateral spacing deforms the inside contour of the double cavity. The diameter of the inside cavity increases as the lateral spacing increases and gradually approaches that of a single cavity. The cavity length increases with decreasing lateral spacing. In addition, the maximum diameter and length of the cavity increase with the increase in water entry speed under the same lateral spacing. This paper uses the deformation index β to present the double cavity contour prediction model for the water entry process. The model accurately predicts the cavity contour of a synchronous parallel vertical water entry. Additionally, it is deduced that the critical lateral spacing without mutual influence between cavities in this speed range is approximately 7–8D0. The “grass sprouting” splashing development rules were discovered during the synchronous parallel high-speed vertical water entry.
- 1 May 2024
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (5)
Experimental study on synchronous high-speed vertical water entry of cylinders
This paper studied the synchronous parallel high-speed vertical water entry of cylinders through experimental methods. The study found that the double cavity exhibited favorable symmetry characteristics during the synchronous parallel vertical water entry of cylinders at the same speed. The outside of the double cavity develops freely, consistent with the single cavity. The lateral spacing deforms the inside contour of the double cavity. The diameter of the inside cavity increases as the lateral spacing increases and gradually approaches that of a single cavity. The cavity length increases with decreasing lateral spacing. In addition, the maximum diameter and length of the cavity increase with the increase in water entry speed under the same lateral spacing. This paper uses the deformation index β to present the double cavity contour prediction model for the water entry process. The model accurately predicts the cavity contour of a synchronous parallel vertical water entry. Additionally, it is deduced that the critical lateral spacing without mutual influence between cavities in this speed range is approximately 7–8D0. The “grass sprouting” splashing development rules were discovered during the synchronous parallel high-speed vertical water entry.
- 6 March 2024
- Published by Elsevier in Applied Ocean Research
- Vol. 146
Experimental study on asynchronous parallel high-speed oblique water entry of cylinders
- 6 March 2024
- Published by Elsevier in Applied Ocean Research
- Vol. 146
Experimental study on asynchronous parallel high-speed oblique water entry of cylinders
- 1 August 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (8) , 086106
Theoretical and numerical simulation study on aerodynamics of V configuration high-pressure capture wing (HCW-V)
The high-pressure capture wing (HCW) configuration has excellent aerodynamic characteristics verified by theoretical, experimental, and numerical simulation methods. It has a good effect on improving vehicle lift at hypersonic speed. A HCW-V configuration based on the HCW was proposed in this paper. This configuration further increased the vehicle's lift by increasing the wedge angle of the capture wing and forming a compression plane on the lower surface. We obtained the pressure ratio relationship between the upper and lower surfaces of the HCW-V configuration concerning the free-stream airflow Mach number, the body compression angle, and the captive wing wedge angle based on theoretical derivation. It was nearly 60% higher than the HCW configuration pressure ratio. In addition, the influence of the HCW-V configuration on the vehicle's aerodynamic characteristics at different Mach numbers and body compression angles was studied through numerical simulation methods. The HCW-V configuration improved the lift-to-drag ratio by at least 25% compared with the HCW configuration. The expression of the lift coefficient of the vehicle CL = −0.095Ma∞tanδ + 2.352tanδ + 0.031θ + 0.010 under the model presented was obtained in this study. Meanwhile, the adaptability of this configuration to varied Mach number and attack angle was investigated further. The average lift-to-drag ratio of HCW-V was increased by 23.7% and 7.09% at varying Mach numbers and angles of attack. The lift-to-drag ratio of the three-dimensional HCW-V configuration is 14% higher than that of the HCW configuration when the wedge angle is 4.19°.
- 1 August 2022
- Published by AIP Publishing in Physics of Fluids
- Vol. 34 (8) , 086106
Theoretical and numerical simulation study on aerodynamics of V configuration high-pressure capture wing (HCW-V)
The high-pressure capture wing (HCW) configuration has excellent aerodynamic characteristics verified by theoretical, experimental, and numerical simulation methods. It has a good effect on improving vehicle lift at hypersonic speed. A HCW-V configuration based on the HCW was proposed in this paper. This configuration further increased the vehicle's lift by increasing the wedge angle of the capture wing and forming a compression plane on the lower surface. We obtained the pressure ratio relationship between the upper and lower surfaces of the HCW-V configuration concerning the free-stream airflow Mach number, the body compression angle, and the captive wing wedge angle based on theoretical derivation. It was nearly 60% higher than the HCW configuration pressure ratio. In addition, the influence of the HCW-V configuration on the vehicle's aerodynamic characteristics at different Mach numbers and body compression angles was studied through numerical simulation methods. The HCW-V configuration improved the lift-to-drag ratio by at least 25% compared with the HCW configuration. The expression of the lift coefficient of the vehicle CL = −0.095Ma∞tanδ + 2.352tanδ + 0.031θ + 0.010 under the model presented was obtained in this study. Meanwhile, the adaptability of this configuration to varied Mach number and attack angle was investigated further. The average lift-to-drag ratio of HCW-V was increased by 23.7% and 7.09% at varying Mach numbers and angles of attack. The lift-to-drag ratio of the three-dimensional HCW-V configuration is 14% higher than that of the HCW configuration when the wedge angle is 4.19°.