Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yi Zeng has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    In Situ Damage Detection Method for Metallic Shear Plate Dampers Based on the Active Sensing Method and Machine Learning Algorithms

    by Yunfei Li, Feng Xiong, Hong Liu, Xiongfei Li, Huanlong Ding, Yi Liao, Yi Zeng

    Metallic Shear Plate Dampers (MSPDs) are essential components in passive vibration control systems and require rapid post-earthquake inspection to assess damage and determine replacement needs. Traditional visual inspection methods suffer from low efficiency and limited ability to detect concealed damage. This study proposes a novel MSPD damage detection method based on active sensing and the k-nearest neighbor (KNN) algorithm, featuring high accuracy, efficiency, and low cost. Quasi-static tests were conducted to simulate various damage states. Sweep-frequency excitation was applied using a charge amplifier, and piezoelectric sensors were employed to generate and receive stress wave signals corresponding to different damage conditions. The acquired signals were processed using wavelet packet transform (WPT) and energy spectrum analysis to extract discriminative time–frequency features, which were used to train and validate the KNN model. Results show that the model achieved a validation accuracy of 98.9% using all valid data and 98.1% using a single excitation-sensing channel. When tested on an MSPD with a similar overall structure but lacking stiffeners, the model achieved an accuracy of 92.6% in distinguishing between healthy and damaged states. This indicates that the proposed method has good robustness and practical potential for MSPDs with similar damage evolution and failure modes despite certain structural variations.


  • Open Access

    DamageYOLO: An In Situ Damage Detection Framework for Rubber Bearings Using the Active‐Sensing Method and an Attention‐Enhanced YOLO Network

    by Chubing Deng, Feng Xiong, Yunfei Li, Xiaoting Wang, Yi Zeng

    During long‐term service, the mechanical properties of laminated rubber bearings are altered by earthquakes, sustained loads, temperature variations, and other factors, thereby reducing their seismic isolation performance. To address the limitation that existing methods cannot achieve in situ, high‐precision detection of bearing mechanical properties, this study proposes an innovative detection framework, DamageYOLO. This framework integrates active sensing, the Continuous Wavelet Transform (CWT), and a pretrained YOLOv5s model enhanced with attention mechanisms. The pretrained YOLOv5s model is fine‐tuned to adapt to the bearing damage detection task, and the Squeeze‐and‐Excitation (SE) and Multihead Attention (MHA) modules are introduced to enhance the model’s feature representation capability. To validate the effectiveness of the DamageYOLO framework, a database containing 2880 samples was established through accelerated aging and active‐sensing experiments. The corresponding detection signals were converted into two‐dimensional wavelet scalograms using CWT and used as input features for the model. The results show that, on the test set, the developed model, DamageYOLO–shear, achieved a coefficient of determination ( R 2 ) of 0.9996 and a mean absolute error (MAE) of 0.8 N/mm. Furthermore, the proposed model exhibits superior predictive performance compared with deep learning models developed using time‐domain images and wavelet packet energy spectra. This suggests that the DamageYOLO framework provides a new and effective approach for damage detection in laminated rubber bearings.

  • Detection of void damage in laminated rubber bearings based on a fine-tuned YOLOv5s model

    by Xiangliang Tang, Chubing Deng, Haodong Xu, Lei Li, Feng Xiong, Yi Zeng

    As a seismic isolation device, laminated rubber bearings are widely used in bridges. With increasing service life and under the effects of vehicular vibrations, earthquakes, and construction quality issues, these bearings frequently develop void damage, which poses risks to structural safety. However, manual inspection suffers from untimely detection, heavy workload, limited accuracy, and safety hazards. To rapidly and accurately detect the degree of void damage in bearings, this study proposes an innovative detection method combining the active sensing method, continuous wavelet transform (CWT), and a fine-tuned YOLOv5s model. A total of 2064 sets of detection signals from laminated rubber bearings in different void degrees were obtained using the active sensing method, and CWT was applied to convert the one-dimensional signals into two-dimensional time–frequency images. Subsequently, the pre-trained YOLOv5s model was fine-tuned to optimize its adaptability for void degree detection. Building on this foundation, a high-accuracy detection model was established. Across the training, validation, and test sets, all four metrics are identical, with accuracy = 100% and precision = recall = F1-score = 1.0. This indicates that the model’s predictions perfectly match the true labels. Compared with models trained on one-dimensional data or on two-dimensional time–frequency images, the proposed model exhibits a significant improvement in predictive performance. The proposed method shows strong potential for void damage detection in bridge bearings, enabling timely and high-accuracy diagnosis and thereby contributing to the safety of bridge structures.

  • Void damage detection of rubber bearings in bridge structures under laboratory conditions using the active sensing method and BO-XGBoost algorithm

    by Chubing Deng, Yunfei Li, Feng Xiong, Yi Zeng

    In bridge engineering, void damage in rubber bearings refers to the phenomenon where gaps occur between the rubber bearing and the bridge structure due to factors such as aging, overloading, and earthquakes. Void damage can lead to abnormal stress distribution, bearing deformation failure, and uneven load transfer, thereby affecting the overall stability and safety of the bridge. Consequently, long-term monitoring of void damage is essential. However, methods such as manual inspection and computer vision have disadvantages, including high costs, lengthy processes, and limited monitoring scope. To address these challenges in void damage detection, this paper proposes a novel method that combines the active sensing approach with the Bayesian optimization (BO)-optimized Extreme Gradient Boosting (XGBoost) algorithm. A total of 1200 sets of experimental data under different void conditions were obtained through the active sensing method, and a high-precision void damage detection model based on the BO-XGBoost algorithm was proposed. The study found that the proposed void damage detection model achieved an Accuracy value of 95.0% on the test set, indicating that the combination of the active sensing method with the BO-XGBoost algorithm can effectively solve the problem of void damage detection in laminated rubber bearings.


  • Top Cited Papers
    Open Access

    Detection of Rupture Damage Degree in Laminated Rubber Bearings Using a Piezoelectric‐Based Active Sensing Method and Hybrid Machine Learning Algorithms

    by Chubing Deng, Yunfei Li, Feng Xiong, Hong Liu, Xiongfei Li, Yi Zeng

    Laminated rubber bearings may exhibit rupture damage due to factors such as temperature variations and seismic activity, which can reduce their isolation performance. Current detection methods, including human‐vision inspection and computer‐vision inspection, have certain limitations in accurately assessing the degree of rupture damage. This study attempts to combine the piezoelectric‐based active sensing method with a machine learning algorithm to detect rupture damage in laminated rubber bearings. A series of laminated rubber bearings with varying degrees of rupture damage were fabricated, and 1440 sets of detection signals were obtained through experiments using the active sensing method. This study proposes a hybrid machine learning algorithm that integrates a one‐dimensional convolutional neural network (1DCNN), long short–term memory (LSTM) network, Bayesian optimization (BO) algorithm, and extreme gradient boosting (XGB) algorithm. The algorithm involves using the 1DCNN and LSTM algorithms to extract the deep features from the wavelet packet energy spectra of the detection signals, and then employing the XGB algorithm optimized by the BO algorithm to construct the prediction model. The research results indicate that the proposed 1DCNN–LSTM–BO–XGB model achieved an accuracy value of 98.6% on the test set, outperforming the 1DCNN–LSTM (91.7%), 1DCNN (88.9%), LSTM (25.0%), XGB (90.3%), and SVM (66.7%) algorithms. Therefore, the combination of the active sensing method and machine learning algorithm shows promising application prospects in detecting the degree of rupture damage in laminated rubber bearings.


  • A multitask framework with self-attention mechanism for simultaneous detection of axial pressure, shear deformation, and rupture damage in rubber bearings

    by Yi Zeng, Yunfei Li, Feng Xiong, Yaoqing Xiong, Tengfei Xu, Kailai Deng

    Base-isolated structures can effectively control structural response, of which rubber bearings are key components. To ensure the proper functioning of rubber bearings, it is important to accurately detect their state. In previous studies, a smart rubber bearing has been proposed to monitor the axial pressure, shear deformation, and rupture damage of rubber bearings. However, owing to the small dataset and limited ability of the prediction model, two problems exist in previous research: (1) the axial pressure, shear deformation, and rupture damage cannot be detected simultaneously and (2) the detection accuracy is not sufficiently high for practical applications. This study solves these problems in three aspects. First, it addresses the issue of limited data by researching and comparing three data augmentation methods. Second, a multitask framework with a self-attention mechanism is established to simultaneously detect axial compression, shear deformation, and rupture damage. Finally, we introduce a two-stage optimization method based on Bayesian optimization and a grid search for the network structure and optimization. The root-mean-square errors for predicting the axial pressure and shear deformation in the test set are 0.19 MPa and 2.04%, which reduced the error by up to 56.8% and 73.0%, respectively, compared to conventional deep neural network models. In addition, the accuracy of rupture damage detection reached 100%.

  • Predicting the degree of rubber rupture damage using a GAN-enhanced Bayesian-optimized 1DCNN network

    by Yi Zeng, Chubing Deng, Feng Xiong, Hong Liu, Xiongfei Li, Ye Liu

    Influenced by factors such as temperature, aging, and overloading, rubber bearings may undergo rupture during prolonged usage, leading to severe consequences such as bearing failure and structural damage. To accurately assess the degree of rubber rupture damage, this study proposed a novel generative adversarial network (GAN)-enhanced Bayesian-optimized one-dimensional convolutional neural network (1DCNN) framework (GAN-BCNN). In the GAN-BCNN framework, GAN is used to enhance the proportion of damaged data in the database, while Bayesian optimization is utilized to optimize crucial hyperparameters in the 1DCNN network. The predictive results indicate that the proposed GAN-BCNN model accurately predicts the degree of rubber rupture damage, achieving high classification accuracies of 99.1, 95.5, 92.9, and 98.0% for the categories of no damage, slight damage, moderate damage, and severe damage, respectively. When compared to the linear discriminant analysis model and the BCNN model without GAN enhancement, the proposed GAN-BCNN model exhibits a significant improvement in predictive accuracy, with an increase in Accuracy values of 52.4 and 6.0%, respectively. These results indicate that the GAN-BCNN model holds promising practical applications, and the GAN algorithm contributes to improving the prediction accuracy of the model.


  • A deep learning method to monitor axial pressure and shear deformation of rubber bearings under coupled compression and shear loading

    by Yi Zeng, Zhizhou He, Peng Pan

    Laminated rubber bearings are the key components of base isolated structures. It is important to effectively monitor the axial pressure and shear deformation in rubber bearings. In previous studies, the axial pressure and shear deformation of rubber bearings have been monitored separately using wavelet‐packet‐based method. However, when the axial pressure and deformation of rubber bearings change at the same time, the prediction error of the above method is large. Therefore, this paper proposed a new deep neural network architecture, named P&D‐NET to monitor the axial pressure and shear deformation simultaneously. The P&D‐NET combines wavelet packet decomposition method and fully connected neural network. In this study, the coupling effects of axial pressure and shear deformation monitoring are studied by full‐scale experiments. The details of P&D‐NET are also introduced. Three full‐scale smart rubber bearings (SRB) were tested under different axial pressure and shear deformation to form a real measured dataset. The influence of feature extraction methods, network structures, and weighting coefficient in loss function was investigated to optimize the network. By using the optimal hyperparameters, the root‐mean‐square error (RMSE) of axial pressure prediction and shear deformation prediction in the test set is 1.41 MPa and 17.6%, which has reduced the error by up to 68.8% compared to the previous wavelet‐packet‐based method.