Saeid Kamal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Saeid Kamal has a total of 135 co-authors. Here are the top co-authors by number of shared publications:
- Allan K. Bertram
University of British Columbia
7 shared publications - Marek B. Majewski
Department of Chemistry and Biochemistry and Centre for NanoScience Research, Concordia University, 7141 Sherbrooke Street West, Montreal, Quebec, Canada, H4B 1R6
5 shared publications - Jessica Toigo
Department of Chemistry, University of British Columbia, Vancouver, British Columbia V6T 1Z1, Canada
4 shared publications - Ka-Ming Tong
University of British Columbia
4 shared publications - Michael O. Wolf
University of British Columbia
4 shared publications - Brian O. Patrick
University of British Columbia
3 shared publications
Latest Publications
- 6 November 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Excited-State Dynamics of Platinum(II) Complexes with Flexible Lewis Pair Ligands
Excited-state dynamics of platinum(II) complexes coordinated with stimuli-responsive flexible Lewis pair (FlexLP) and 4,4′-di-tert-butyl-2,2′-bipyridine (tBu2bpy), 1,2-bis(diphenylphosphino)ethane (dppe), or triphenylphosphine (PPh3) ligands were investigated by ultrafast transient absorption spectroscopy. Spectroscopic studies reveal that the platinum(II) bipyridine complex exhibits faster intersystem crossing (ISC) and triplet excited-state decay than the complexes with phosphine ligands, attributed to the higher contribution of charge-transfer (CT) and metal character in the excited states. The triplet excited-state lifetimes of the complexes are also influenced by the conformation of the FlexLP ligands, with the closed-form complexes showing longer lifetimes than the open-form complexes.
- 6 November 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Excited-State Dynamics of Platinum(II) Complexes with Flexible Lewis Pair Ligands
Excited-state dynamics of platinum(II) complexes coordinated with stimuli-responsive flexible Lewis pair (FlexLP) and 4,4′-di-tert-butyl-2,2′-bipyridine (tBu2bpy), 1,2-bis(diphenylphosphino)ethane (dppe), or triphenylphosphine (PPh3) ligands were investigated by ultrafast transient absorption spectroscopy. Spectroscopic studies reveal that the platinum(II) bipyridine complex exhibits faster intersystem crossing (ISC) and triplet excited-state decay than the complexes with phosphine ligands, attributed to the higher contribution of charge-transfer (CT) and metal character in the excited states. The triplet excited-state lifetimes of the complexes are also influenced by the conformation of the FlexLP ligands, with the closed-form complexes showing longer lifetimes than the open-form complexes.
- Open Access
- 15 October 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (39) , 18915-18923
Excited state distortions reverse the decay lifetime trend in Fe( ii ) phenanthroline complexes
Excited state geometric distortions in iron( ii ) phenanthroline NHC complexes show an unexpected excited state decay lifetime trend.
- 15 October 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (39) , 18915-18923
Open AccessExcited state distortions reverse the decay lifetime trend in Fe( ii ) phenanthroline complexes
Excited state geometric distortions in iron( ii ) phenanthroline NHC complexes show an unexpected excited state decay lifetime trend.
- Open Access
- 7 October 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (38) , 18312-18325
Imidazophenothiazine-based photocatalysts enable the organocatalyzed atom-transfer radical polymerization of styrene
Organocatalyzed atom transfer radical polymerization (O-ATRP) represents a powerful, metal-free strategy for precision polymer synthesis.
- 7 October 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (38) , 18312-18325
Open AccessImidazophenothiazine-based photocatalysts enable the organocatalyzed atom-transfer radical polymerization of styrene
Organocatalyzed atom transfer radical polymerization (O-ATRP) represents a powerful, metal-free strategy for precision polymer synthesis.
- 25 September 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (39) , 28975-28992
Disruption of Lignin-Emissive Domains: Deciphering Fiber–Cement Interfacial Reactions by EEM Fluorescence and DUV Raman Spectroscopy
Deciphering the fiber–cement interfacial reaction without chemical labeling and digestion remains a significant challenge in vibrational and fluorescence spectroscopy. Herein, we have elucidated the reaction between lignin and calcium hydroxide (Ca(OH)2) utilizing excitation emission matrix (EEM) fluorescence and deep ultraviolet (DUV) Raman spectroscopy. Tracking lignin photoluminescence via excitation–emission maxima (EX–EM max) reveals emission governed by both classical aromatic chromophores and supramolecular clusteroluminogen networks. In unbleached Kraft pulp (UBKP) fibers, the excitation-dependent shift in emission maxima reflects multiple coexisting emissive cluster populations. Cement matrix-induced chemical degradation disrupts lignin emissive domains and drives a characteristic hypsochromic shift in EX–EM max, which depends on fiber size fraction. We highlight the diagnostic advantage of selecting a single 330 nm excitation wavelength to concurrently probe phenolic (∼415 nm) and nonphenolic (∼540 nm) lignin domains. The observed fluorescence spectral evolution is consistent with the progressive lignin–Ca(OH)2 reaction. Spectral tracking over 2 years demonstrates that this reaction follows diffusion-controlled kinetics, culminating in progressive fiber mineralization. Incorporation of a rock dust blend (RDB) as a solid-state pH modifier preserves composite flexural strength across 5–20 wt % cement replacement, suppressing phenolic degradation while reducing the hypsochromic shift of nonphenolic emissions by ∼50%. Aqueous alkaline model systems (NaOH, pH 11–13) further support these findings, showing that phenolic reactivity (I415) increases with alkalinity. DUV Raman spectroscopy confirms that hydroxide ions from Ca(OH)2 preferentially attack ether (C–O) and carbonyl (C═O) linkages, causing structural breakdown of the lignin. In agreement with fluorescence tracking, the overall extent of the fiber–cement interfacial reaction strongly depends on both fiber size fraction and fiber content.
- 25 September 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (39) , 28975-28992
Disruption of Lignin-Emissive Domains: Deciphering Fiber–Cement Interfacial Reactions by EEM Fluorescence and DUV Raman Spectroscopy
Deciphering the fiber–cement interfacial reaction without chemical labeling and digestion remains a significant challenge in vibrational and fluorescence spectroscopy. Herein, we have elucidated the reaction between lignin and calcium hydroxide (Ca(OH)2) utilizing excitation emission matrix (EEM) fluorescence and deep ultraviolet (DUV) Raman spectroscopy. Tracking lignin photoluminescence via excitation–emission maxima (EX–EM max) reveals emission governed by both classical aromatic chromophores and supramolecular clusteroluminogen networks. In unbleached Kraft pulp (UBKP) fibers, the excitation-dependent shift in emission maxima reflects multiple coexisting emissive cluster populations. Cement matrix-induced chemical degradation disrupts lignin emissive domains and drives a characteristic hypsochromic shift in EX–EM max, which depends on fiber size fraction. We highlight the diagnostic advantage of selecting a single 330 nm excitation wavelength to concurrently probe phenolic (∼415 nm) and nonphenolic (∼540 nm) lignin domains. The observed fluorescence spectral evolution is consistent with the progressive lignin–Ca(OH)2 reaction. Spectral tracking over 2 years demonstrates that this reaction follows diffusion-controlled kinetics, culminating in progressive fiber mineralization. Incorporation of a rock dust blend (RDB) as a solid-state pH modifier preserves composite flexural strength across 5–20 wt % cement replacement, suppressing phenolic degradation while reducing the hypsochromic shift of nonphenolic emissions by ∼50%. Aqueous alkaline model systems (NaOH, pH 11–13) further support these findings, showing that phenolic reactivity (I415) increases with alkalinity. DUV Raman spectroscopy confirms that hydroxide ions from Ca(OH)2 preferentially attack ether (C–O) and carbonyl (C═O) linkages, causing structural breakdown of the lignin. In agreement with fluorescence tracking, the overall extent of the fiber–cement interfacial reaction strongly depends on both fiber size fraction and fiber content.
- 14 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (37) , 39452-39460
Overriding Nitrogen-Centered Reactivity of Sulfinamidyl Radicals Enables Sulfoximine Synthesis
The synthesis of sulfoximines under mild, modular conditions remains a challenge, reflecting broader limitations in controlling sulfur-centered radical reactivity. Here, we show that sulfinamides, previously associated primarily with nitrogen-centered radical pathways, can instead engage in productive sulfur-centered radical chemistry. This enables a photoredox strategy to access vinyl sulfoximines from readily prepared sulfinamides and vinyl bromides by diverting ambident sulfinamidyl radicals toward sulfur-centered C–S bond formation. Mechanistic experiments and DFT calculations support a pathway in which reversible sulfur addition is rendered productive by rapid subsequent β-scission of the halogen atom, thereby overriding thermodynamically favored nitrogen reactivity. The method provides broad access to diverse sulfoximines and tolerates varied vinyl halides, aryl and heteroaryl sulfinamides, and N-acyl substituents. In a representative enantioenriched example, excellent enantioretention is observed, consistent with an enantiospecific radical addition–elimination mechanism enabled by the configurational stability of the chiral sulfinamidyl radical, as supported by computed inversion barriers. These findings exemplify how rapid follow-on chemistry can override thermodynamic preference in reactions of ambident radicals.
- 14 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (37) , 39452-39460
Overriding Nitrogen-Centered Reactivity of Sulfinamidyl Radicals Enables Sulfoximine Synthesis
The synthesis of sulfoximines under mild, modular conditions remains a challenge, reflecting broader limitations in controlling sulfur-centered radical reactivity. Here, we show that sulfinamides, previously associated primarily with nitrogen-centered radical pathways, can instead engage in productive sulfur-centered radical chemistry. This enables a photoredox strategy to access vinyl sulfoximines from readily prepared sulfinamides and vinyl bromides by diverting ambident sulfinamidyl radicals toward sulfur-centered C–S bond formation. Mechanistic experiments and DFT calculations support a pathway in which reversible sulfur addition is rendered productive by rapid subsequent β-scission of the halogen atom, thereby overriding thermodynamically favored nitrogen reactivity. The method provides broad access to diverse sulfoximines and tolerates varied vinyl halides, aryl and heteroaryl sulfinamides, and N-acyl substituents. In a representative enantioenriched example, excellent enantioretention is observed, consistent with an enantiospecific radical addition–elimination mechanism enabled by the configurational stability of the chiral sulfinamidyl radical, as supported by computed inversion barriers. These findings exemplify how rapid follow-on chemistry can override thermodynamic preference in reactions of ambident radicals.
- 11 August 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (33) , 23270-23284
Brightly Fluorescent Self-Assembled Supra-J-Aggregate Nanoparticles for Bioanalysis and Imaging
J-aggregates of molecular dyes have the potential to serve as bright fluorophores with spectrally narrow emission for bioanalysis and imaging; however, this potential is largely untapped due to challenges in developing an architecture that stabilizes the J-aggregates, minimizes nonspecific binding interactions, and facilitates bioconjugation. Here, we develop and deploy colloidal supra-nanoparticle assemblies of J-aggregates as fluorescent labels. The assemblies, denoted as (Supra-J)-Dex, form via the spontaneous layer-by-layer assembly of a polycation, a cyanine dye (TDBC), and a dextran amphiphile on a silica nanoparticle scaffold. The (Supra-J)-Dex, which are characterized at both the ensemble and single-particle levels, are many-fold brighter than a benchmark monomeric fluorophore (rhodamine B) and far narrower in emission bandwidth. The minuscule Stokes shift associated with J-aggregates is neither an obstacle to one-photon-excitation fluorescence microscopy nor to imaging with a smartphone-based device equipped with an LED light source. It is also outrightly avoidable by two-photon excitation of fluorescence. (Supra-J)-Dex outperformed rhodamine B-labeled dextran and a semiconductor quantum dot in a mock lateral flow assay and in the immunofluorescent labeling of breast cancer cells via tetrameric antibody complexes. The assembly method appears generally applicable to cyanine dyes with anionic side chains, where future work will need to identify dye structural features that lead to bright fluorescence on par with supra-nanoparticle assemblies of TDBC dye. Overall, the (Supra-J)-Dex architecture simply and effectively harnessed J-aggregates for sensitive and selective fluorescent detection in bioanalysis.
- 11 August 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (33) , 23270-23284
Brightly Fluorescent Self-Assembled Supra-J-Aggregate Nanoparticles for Bioanalysis and Imaging
J-aggregates of molecular dyes have the potential to serve as bright fluorophores with spectrally narrow emission for bioanalysis and imaging; however, this potential is largely untapped due to challenges in developing an architecture that stabilizes the J-aggregates, minimizes nonspecific binding interactions, and facilitates bioconjugation. Here, we develop and deploy colloidal supra-nanoparticle assemblies of J-aggregates as fluorescent labels. The assemblies, denoted as (Supra-J)-Dex, form via the spontaneous layer-by-layer assembly of a polycation, a cyanine dye (TDBC), and a dextran amphiphile on a silica nanoparticle scaffold. The (Supra-J)-Dex, which are characterized at both the ensemble and single-particle levels, are many-fold brighter than a benchmark monomeric fluorophore (rhodamine B) and far narrower in emission bandwidth. The minuscule Stokes shift associated with J-aggregates is neither an obstacle to one-photon-excitation fluorescence microscopy nor to imaging with a smartphone-based device equipped with an LED light source. It is also outrightly avoidable by two-photon excitation of fluorescence. (Supra-J)-Dex outperformed rhodamine B-labeled dextran and a semiconductor quantum dot in a mock lateral flow assay and in the immunofluorescent labeling of breast cancer cells via tetrameric antibody complexes. The assembly method appears generally applicable to cyanine dyes with anionic side chains, where future work will need to identify dye structural features that lead to bright fluorescence on par with supra-nanoparticle assemblies of TDBC dye. Overall, the (Supra-J)-Dex architecture simply and effectively harnessed J-aggregates for sensitive and selective fluorescent detection in bioanalysis.
- Open Access
- 15 January 2026
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (6) , 2337-2347
Photophysical properties of Co( iii ) photosensitizers with phenothiazine-based ligands
The ultrafast decay inherent to metal complexes with a 3d6 configuration limits their application as photosensitizers. Despite recent advances in improving the photophysical properties of these complexes, existing ligand designs restrict further modification and are often synthetically challenging. Here, we show how sulfur-bridged ligands can be used to tune the structural and photophysical properties in Co(III) photosensitizers. Two complexes, CoS ([Co(PTZIm2)2]PF6) and CoSO2 ([Co(PTZO2Im2)2]PF6), adopt facial geometries due to a less rigid ligand backbone compared to other pincer-type ligands. The lowest-lying absorption bands of both CoS and CoSO2 display metal/ligand-to-ligand charge-transfer (M + L)LCT character with different contributions from the sulfur-bridged ligand. TD-DFT analysis indicates that CoSO2 has a lower contribution from the phenothiazine moiety to the band at 400 nm. The sulfur oxidation state also affects the electronic density at the metal center, with CoS showing a lower MIV/III oxidation potential. Transient absorption experiments reveal that fast non-radiative decay channels are facilitated in CoS. However, a photoactive long-lived component (8.0 ns) is also observed. Oxidation of phenothiazine extends the lifetimes of short-lived components in CoSO2, where both electronic and structural effects may be playing a role. These findings demonstrate that the photophysical properties of Co(III) complexes can be modulated by variation of the sulfur oxidation state to achieve different photophysical properties of the complexes.
- 15 January 2026
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 13 (6) , 2337-2347
Open AccessPhotophysical properties of Co( iii ) photosensitizers with phenothiazine-based ligands
The ultrafast decay inherent to metal complexes with a 3d6 configuration limits their application as photosensitizers. Despite recent advances in improving the photophysical properties of these complexes, existing ligand designs restrict further modification and are often synthetically challenging. Here, we show how sulfur-bridged ligands can be used to tune the structural and photophysical properties in Co(III) photosensitizers. Two complexes, CoS ([Co(PTZIm2)2]PF6) and CoSO2 ([Co(PTZO2Im2)2]PF6), adopt facial geometries due to a less rigid ligand backbone compared to other pincer-type ligands. The lowest-lying absorption bands of both CoS and CoSO2 display metal/ligand-to-ligand charge-transfer (M + L)LCT character with different contributions from the sulfur-bridged ligand. TD-DFT analysis indicates that CoSO2 has a lower contribution from the phenothiazine moiety to the band at 400 nm. The sulfur oxidation state also affects the electronic density at the metal center, with CoS showing a lower MIV/III oxidation potential. Transient absorption experiments reveal that fast non-radiative decay channels are facilitated in CoS. However, a photoactive long-lived component (8.0 ns) is also observed. Oxidation of phenothiazine extends the lifetimes of short-lived components in CoSO2, where both electronic and structural effects may be playing a role. These findings demonstrate that the photophysical properties of Co(III) complexes can be modulated by variation of the sulfur oxidation state to achieve different photophysical properties of the complexes.
- 6 October 2025
- Published by American Chemical Society (ACS) in ACS ES&T Air
- Vol. 2 (11) , 2669-2679
Viscosity Variability from Smoldering Eucalyptus Smoke: From High Viscosity Tar Balls to Low Viscosity Organic Aerosol
- 6 October 2025
- Published by American Chemical Society (ACS) in ACS ES&T Air
- Vol. 2 (11) , 2669-2679
Viscosity Variability from Smoldering Eucalyptus Smoke: From High Viscosity Tar Balls to Low Viscosity Organic Aerosol
- 3 September 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
C–H Bond Activation via Photolysis of a Mn Nitride Ligand Radical Complex
We report the thermal and photoactivation of a solution-stable Mn nitride ligand radical complex [MnV(SalNMe2•)N]+, which facilitates N-N bond homocoupling to generate N2, a reaction commonly observed in MnVI nitrides. Theoretical calculations suggest that the nitride is ambiphilic, facilitating the N-N bond formation. Notably, photoactivation of the MnV ligand radical at room temperature enables rapid C-H bond activation, leading to the formation of C-N insertion products, excluding dihydroanthracene where a desaturation product is observed. This study presents a rare example of photochemically driven intermolecular N atom transfer to a C-H bond mediated by a first-row Mn terminal nitride complex, made possible by the unique stability and turn-on reactivity of the oxidized ligand radical electronic structure.
- 3 September 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
C–H Bond Activation via Photolysis of a Mn Nitride Ligand Radical Complex
We report the thermal and photoactivation of a solution-stable Mn nitride ligand radical complex [MnV(SalNMe2•)N]+, which facilitates N-N bond homocoupling to generate N2, a reaction commonly observed in MnVI nitrides. Theoretical calculations suggest that the nitride is ambiphilic, facilitating the N-N bond formation. Notably, photoactivation of the MnV ligand radical at room temperature enables rapid C-H bond activation, leading to the formation of C-N insertion products, excluding dihydroanthracene where a desaturation product is observed. This study presents a rare example of photochemically driven intermolecular N atom transfer to a C-H bond mediated by a first-row Mn terminal nitride complex, made possible by the unique stability and turn-on reactivity of the oxidized ligand radical electronic structure.
- 25 August 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (35) , 14551-14560
Hydration-Driven Surface Engineering of Nanocellulose Films for Iridescent Structural Colors
- 25 August 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (35) , 14551-14560
Hydration-Driven Surface Engineering of Nanocellulose Films for Iridescent Structural Colors