Chuang Han
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chuang Han has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Tao Shen
School of Measurement-Control Technology and Communication Engineering, Harbin University of Science and Technology, Harbin 150080, China
5 shared publications - Chengli Guo
Sunny Group Co., Ltd., Yuyao 315400, China
4 shared publications - Bowen Xing
College of Engineering Science and Technology, Shanghai Ocean University, Shanghai, China
2 shared publications - Min Sun
College of Engineering Science and Technology, Shanghai Ocean University, Shanghai 201306, China
2 shared publications Minyang Ding
Marine Design & Research Institute of China
2 shared publications- Abdur Rouf
School of Electronics and Information Engineering, Hebei University of Technology, Tianjin 300130, China
1 shared publication
Latest Publications
- Open Access
3D Perception-Based Adaptive Point Cloud Simplification and Slicing for Soil Compaction Pit Volume Calculation
In the field of subgrade compaction quality assessment, accurate volume measurement of excavated pits is hindered by non-uniform point cloud distribution, environmental noise interference, and complex irregular boundary features. To address these challenges, this paper proposes a robust volume detection framework that integrates adaptive point cloud refinement and morphological discrimination. First, a pose normalization method employing RANSAC plane fitting and rigid body transformation corrects the spatial orientation of the raw point clouds. To balance data redundancy removal with feature preservation, a gradient adaptive simplification strategy based on local density feedback and K-nearest neighbor estimation is developed. Subsequently, a cross-sectional area calculation model utilizing piecewise-cubic polynomial fitting is proposed to mitigate boundary noise and accurately reconstruct irregular contours. Furthermore, a dynamic outlier removal mechanism based on the Median Absolute Deviation (MAD) and sliding windows is introduced to eliminate non-physical geometric fluctuations. Finally, the total volume is aggregated using a hybrid strategy of Simpson’s rule and a frustum compensation operator. Experimental results on simulated pits with typical topological defects demonstrate that the proposed algorithm outperforms traditional methods, achieving an average relative volume error of less than 0.8%. This approach significantly improves the robustness and precision of sensor-based automated subgrade compaction quality measurement.
Open Access3D Perception-Based Adaptive Point Cloud Simplification and Slicing for Soil Compaction Pit Volume Calculation
In the field of subgrade compaction quality assessment, accurate volume measurement of excavated pits is hindered by non-uniform point cloud distribution, environmental noise interference, and complex irregular boundary features. To address these challenges, this paper proposes a robust volume detection framework that integrates adaptive point cloud refinement and morphological discrimination. First, a pose normalization method employing RANSAC plane fitting and rigid body transformation corrects the spatial orientation of the raw point clouds. To balance data redundancy removal with feature preservation, a gradient adaptive simplification strategy based on local density feedback and K-nearest neighbor estimation is developed. Subsequently, a cross-sectional area calculation model utilizing piecewise-cubic polynomial fitting is proposed to mitigate boundary noise and accurately reconstruct irregular contours. Furthermore, a dynamic outlier removal mechanism based on the Median Absolute Deviation (MAD) and sliding windows is introduced to eliminate non-physical geometric fluctuations. Finally, the total volume is aggregated using a hybrid strategy of Simpson’s rule and a frustum compensation operator. Experimental results on simulated pits with typical topological defects demonstrate that the proposed algorithm outperforms traditional methods, achieving an average relative volume error of less than 0.8%. This approach significantly improves the robustness and precision of sensor-based automated subgrade compaction quality measurement.
- Open Access
Underwater Acoustic Source DOA Estimation for Non-Uniform Circular Arrays Based on EMD and PWLS Correction
Uniform circular arrays (UCAs) are widely used in underwater source localization due to their omnidirectional coverage. However, random sensor position errors caused by installation inaccuracies and environmental disturbances convert UCAs into non-uniform circular arrays (NCAs), severely degrading the performance of high-resolution direction of arrival (DOA) estimation algorithms. To address this issue, this paper proposes a robust DOA estimation method that integrates empirical mode decomposition (EMD) denoising with prior-weighted iterative least squares (PWLS) correction. The method first applies EMD to adaptively denoise received signals by selecting intrinsic mode functions based on a combined energy-correlation criterion. An initial DOA estimate is then obtained using the MUSIC algorithm. Finally, a PWLS correction algorithm leverages prior knowledge of deviated sensors to iteratively fit the circle center and gradually pull sensor positions toward the ideal circumference, using a differentiated relaxation mechanism to suppress outliers while preserving geometric features. Systematic Monte Carlo simulations compare five correction algorithms under multi-frequency and wideband signals. The results show that both multi-frequency and wideband signals reduce estimation errors to below 0.1°, with the proposed PWLS achieving the best accuracy under multi-frequency signals, while all algorithms approach zero error under wideband signals. The PWLS algorithm converges in about 10 iterations with high computational efficiency, providing a reliable solution for practical underwater NCA applications.
Open AccessUnderwater Acoustic Source DOA Estimation for Non-Uniform Circular Arrays Based on EMD and PWLS Correction
Uniform circular arrays (UCAs) are widely used in underwater source localization due to their omnidirectional coverage. However, random sensor position errors caused by installation inaccuracies and environmental disturbances convert UCAs into non-uniform circular arrays (NCAs), severely degrading the performance of high-resolution direction of arrival (DOA) estimation algorithms. To address this issue, this paper proposes a robust DOA estimation method that integrates empirical mode decomposition (EMD) denoising with prior-weighted iterative least squares (PWLS) correction. The method first applies EMD to adaptively denoise received signals by selecting intrinsic mode functions based on a combined energy-correlation criterion. An initial DOA estimate is then obtained using the MUSIC algorithm. Finally, a PWLS correction algorithm leverages prior knowledge of deviated sensors to iteratively fit the circle center and gradually pull sensor positions toward the ideal circumference, using a differentiated relaxation mechanism to suppress outliers while preserving geometric features. Systematic Monte Carlo simulations compare five correction algorithms under multi-frequency and wideband signals. The results show that both multi-frequency and wideband signals reduce estimation errors to below 0.1°, with the proposed PWLS achieving the best accuracy under multi-frequency signals, while all algorithms approach zero error under wideband signals. The PWLS algorithm converges in about 10 iterations with high computational efficiency, providing a reliable solution for practical underwater NCA applications.
- Open Access
- 20 March 2026
- Published by MDPI AG in Journal of Imaging
- Vol. 12 (3) , 140
Real-Time Small UAV Detection in Complex Airspace Using YOLOv11 with Residual Attention and High-Resolution Feature Enhancement
Detecting small unmanned aerial vehicles (UAVs) in complex airspace presents significant challenges due to their minimal pixel footprint, resemblance to birds, and frequent occlusion. To address these issues, we propose YOLOv11-ResCBAM, a novel real-time detection framework that integrates a Residual Convolutional Block Attention Module (ResCBAM) and a high-resolution P2 detection head into the YOLOv11 architecture. ResCBAM enhances channel and spatial feature refinement while preserving original feature contexts through residual connections, and the P2 head maintains fine spatial details crucial for small-object localization. Evaluated on a custom dataset of 4917 images (11,733 after augmentation) across three classes (drone, bird, airplane), our model achieves a mean average precision at the 0.5–0.95 IoU threshold (mAP@0.5–0.95) of 0.845, representing a 7.9% improvement over the baseline YOLOv11n, while maintaining real-time inference at 50.51 FPS. Cross-dataset validation on VisDrone2019-DET and UAVDT benchmarks demonstrates promising generalization trends. This work demonstrates the effectiveness of the proposed approach for UAV surveillance systems, balancing detection accuracy with computational efficiency for deployment in security-critical environments.
- 20 March 2026
- Published by MDPI AG in Journal of Imaging
- Vol. 12 (3) , 140
Open AccessReal-Time Small UAV Detection in Complex Airspace Using YOLOv11 with Residual Attention and High-Resolution Feature Enhancement
Detecting small unmanned aerial vehicles (UAVs) in complex airspace presents significant challenges due to their minimal pixel footprint, resemblance to birds, and frequent occlusion. To address these issues, we propose YOLOv11-ResCBAM, a novel real-time detection framework that integrates a Residual Convolutional Block Attention Module (ResCBAM) and a high-resolution P2 detection head into the YOLOv11 architecture. ResCBAM enhances channel and spatial feature refinement while preserving original feature contexts through residual connections, and the P2 head maintains fine spatial details crucial for small-object localization. Evaluated on a custom dataset of 4917 images (11,733 after augmentation) across three classes (drone, bird, airplane), our model achieves a mean average precision at the 0.5–0.95 IoU threshold (mAP@0.5–0.95) of 0.845, representing a 7.9% improvement over the baseline YOLOv11n, while maintaining real-time inference at 50.51 FPS. Cross-dataset validation on VisDrone2019-DET and UAVDT benchmarks demonstrates promising generalization trends. This work demonstrates the effectiveness of the proposed approach for UAV surveillance systems, balancing detection accuracy with computational efficiency for deployment in security-critical environments.
- Open Access
Research on AUV Underwater Localization Method Based on an n-Shaped Array
During continuous navigation of the mother ship, an autonomous underwater vehicle (AUV) can be recovered through an underwater hangar, and the accurate localization of the AUV relative to the mother ship is a key step in the recovery process. To address the AUV localization problem, an n-shaped hydrophone array is designed based on the spatial configuration of the underwater hangar. Since underwater acoustic signals are susceptible to multipath propagation, co-channel interference, and other transmission impairments, the signals received by the array often exhibit coherence. Accordingly, a far-field sound source localization method based on the n-shaped array is proposed. The proposed algorithm first applies spatial smoothing to the x-axis and y-axis subarrays and jointly constructs a received data vector, followed by eigenvalue decomposition of the corresponding covariance matrix. The Multiple Signal Classification (MUSIC) algorithm is then employed to obtain coarse estimates of the source angles. These coarse estimates are subsequently used as initial values for the Space-Alternating Generalized Expectation-maximization (SAGE) algorithm, which performs refined optimization of the angular parameters in a continuous parameter space, thereby effectively improving estimation accuracy. Furthermore, the proposed algorithm is extended from far-field scenarios to near-field localization. Simulation results demonstrate that the proposed method achieves good parameter estimation performance.
Open AccessResearch on AUV Underwater Localization Method Based on an n-Shaped Array
During continuous navigation of the mother ship, an autonomous underwater vehicle (AUV) can be recovered through an underwater hangar, and the accurate localization of the AUV relative to the mother ship is a key step in the recovery process. To address the AUV localization problem, an n-shaped hydrophone array is designed based on the spatial configuration of the underwater hangar. Since underwater acoustic signals are susceptible to multipath propagation, co-channel interference, and other transmission impairments, the signals received by the array often exhibit coherence. Accordingly, a far-field sound source localization method based on the n-shaped array is proposed. The proposed algorithm first applies spatial smoothing to the x-axis and y-axis subarrays and jointly constructs a received data vector, followed by eigenvalue decomposition of the corresponding covariance matrix. The Multiple Signal Classification (MUSIC) algorithm is then employed to obtain coarse estimates of the source angles. These coarse estimates are subsequently used as initial values for the Space-Alternating Generalized Expectation-maximization (SAGE) algorithm, which performs refined optimization of the angular parameters in a continuous parameter space, thereby effectively improving estimation accuracy. Furthermore, the proposed algorithm is extended from far-field scenarios to near-field localization. Simulation results demonstrate that the proposed method achieves good parameter estimation performance.
- Open Access
MBACA-YOLO: A High-Precision Underwater Target Detection Algorithm for Unmanned Underwater Vehicles
This paper addresses the issue of low detection accuracy in underwater optical images for unmanned underwater vehicles (UUVs) during practical operations, caused by factors such as uneven lighting, blur, complex backgrounds, and target occlusion. To enhance the autonomous perception and control capabilities of UUVs, a high-precision algorithm named MBACA-YOLO is proposed based on the YOLOv13n model. Firstly, the convolutional layers in the backbone network of YOLOv13n are optimized by replacing stride-2 convolutions with stride-1 and embedding SPD layers to enable richer feature extraction. Secondly, the newly proposed MBACA attention mechanism is integrated into the final layer of the backbone network, enhancing effective features and suppressing background noise interference. Thirdly, traditional upsampling in the neck network is replaced with CARAFE upsampling to mitigate noise pollution. Finally, an Alpha-Focal-CIoU loss function is designed to improve the accuracy of bounding box regression for underwater targets. To validate the algorithm’s effectiveness, experiments were conducted on the URPC dataset with the following evaluation protocol: 640 × 640 input resolution, batch size 1, FP32 precision, and standard NMS. All results are from a single random seed with 300 epochs of training. The proposed MBACA-YOLO algorithm outperforms the baseline YOLOv13n model, improving mAP@0.5 and mAP@0.5:0.95 by 3.1% and 2.8% respectively, while adding only 0.49M parameters and 1.0 GFLOPs, with an FPS drop of just 2 frames. This makes it an efficient, deployable perception solution for automated Unmanned Underwater Vehicles (UUVs), significantly advancing intelligent underwater systems.
Open AccessMBACA-YOLO: A High-Precision Underwater Target Detection Algorithm for Unmanned Underwater Vehicles
This paper addresses the issue of low detection accuracy in underwater optical images for unmanned underwater vehicles (UUVs) during practical operations, caused by factors such as uneven lighting, blur, complex backgrounds, and target occlusion. To enhance the autonomous perception and control capabilities of UUVs, a high-precision algorithm named MBACA-YOLO is proposed based on the YOLOv13n model. Firstly, the convolutional layers in the backbone network of YOLOv13n are optimized by replacing stride-2 convolutions with stride-1 and embedding SPD layers to enable richer feature extraction. Secondly, the newly proposed MBACA attention mechanism is integrated into the final layer of the backbone network, enhancing effective features and suppressing background noise interference. Thirdly, traditional upsampling in the neck network is replaced with CARAFE upsampling to mitigate noise pollution. Finally, an Alpha-Focal-CIoU loss function is designed to improve the accuracy of bounding box regression for underwater targets. To validate the algorithm’s effectiveness, experiments were conducted on the URPC dataset with the following evaluation protocol: 640 × 640 input resolution, batch size 1, FP32 precision, and standard NMS. All results are from a single random seed with 300 epochs of training. The proposed MBACA-YOLO algorithm outperforms the baseline YOLOv13n model, improving mAP@0.5 and mAP@0.5:0.95 by 3.1% and 2.8% respectively, while adding only 0.49M parameters and 1.0 GFLOPs, with an FPS drop of just 2 frames. This makes it an efficient, deployable perception solution for automated Unmanned Underwater Vehicles (UUVs), significantly advancing intelligent underwater systems.
- Open Access
- 7 June 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (6) , 964
Sonar Fish School Detection and Counting Method Based on Improved YOLOv8 and BoT-SORT
Fish object detection and counting in pelagic fisheries face many challenges in complex environments. Sonar imaging technology offers a solution because it generates high-resolution images underwater. In this paper, we propose a sonar-based fish object detection and counting method using an improved YOLOv8 combined with BoT-SORT to address issues such as missed detection, false detection, and low accuracy caused by complex factors such as equipment motion, light changes, and background noise in pelagic environments. The algorithm utilizes the techniques of lightweight upsampling operator CARAFE, generalized feature pyramid network GFPN, and partial convolution. It integrates with the BoT-SORT tracking algorithm to propose a new region detection method that detects and tracks the schools of fish, providing stable real-time fish counts in the designated area. The experimental results indicate that while focusing on maintaining a lightweight design, the improved algorithm achieved a 3.8% increase in recall and a 2.4% increase in mAP0.5 compared to the original algorithm. This significantly impacts scientific and rational fishery planning, marine resource protection, and improved productivity. At the same time, it provides important data support for marine ecological monitoring, environmental protection, and fishery management, contributing to sustainable fishery development and marine ecology preservation.
- 7 June 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (6) , 964
Open AccessSonar Fish School Detection and Counting Method Based on Improved YOLOv8 and BoT-SORT
Fish object detection and counting in pelagic fisheries face many challenges in complex environments. Sonar imaging technology offers a solution because it generates high-resolution images underwater. In this paper, we propose a sonar-based fish object detection and counting method using an improved YOLOv8 combined with BoT-SORT to address issues such as missed detection, false detection, and low accuracy caused by complex factors such as equipment motion, light changes, and background noise in pelagic environments. The algorithm utilizes the techniques of lightweight upsampling operator CARAFE, generalized feature pyramid network GFPN, and partial convolution. It integrates with the BoT-SORT tracking algorithm to propose a new region detection method that detects and tracks the schools of fish, providing stable real-time fish counts in the designated area. The experimental results indicate that while focusing on maintaining a lightweight design, the improved algorithm achieved a 3.8% increase in recall and a 2.4% increase in mAP0.5 compared to the original algorithm. This significantly impacts scientific and rational fishery planning, marine resource protection, and improved productivity. At the same time, it provides important data support for marine ecological monitoring, environmental protection, and fishery management, contributing to sustainable fishery development and marine ecology preservation.
- Open Access
- 27 September 2023
- Published by Springer Nature in Research Square
Fish Sonar Image Recognition Algorithm Based on Improved YOLOv5
Fish stock assessment is crucial for sustainable marine fisheries management in rangeland ecosystems. To address the challenges posed by overfishing of offshore fish species and to facilitate comprehensive deep-sea resource evaluation, this paper introduces an improved fish sonar image detection algorithm based on You Only Look Once version 5 (YOLOv5). Sonar image noise often results in blurred targets and indistinct features, thereby reducing the precision of object detection. Thus, the C3N module is designed in the neck component, where depth-separable convolution and an inverse bottleneck layer structure are integrated to lessen feature information loss during downsampling and forward propagation. Furthermore, A shallow feature layer is introduced in the network prediction layer to enhance feature extraction for pixels larger than 4x4. Additionally, Normalized Weighted Distance (NWD) based on a Gaussian distribution is combined with Intersection over Union (IOU) during gradient descent to improve small target detection and mitigate IOU's scale sensitivity. Finally, Traditional Non-Maximum Suppression (NMS) is replaced with Soft-NMS, reducing missed detections due to occlusion and overlapping fish targets common in sonar datasets. Experiments show the improved model surpasses the original model and YOLOv3 with gains in precision, recall, and mean average precision (mAP) of 2.3%, 4.7%, and 2.7%, respectively, and 2.5%, 6.3%, and 6.7%, respectively. These findings confirm the method's effectiveness in raising sonar image detection accuracy, consistent with model comparisons. With Unmanned Underwater Vehicles (UUV) advancements, this method holds the potential to support fish culture decision-making and facilitate fish stock resource assessment.
- 27 September 2023
- Published by Springer Nature in Research Square
Open AccessFish Sonar Image Recognition Algorithm Based on Improved YOLOv5
Fish stock assessment is crucial for sustainable marine fisheries management in rangeland ecosystems. To address the challenges posed by overfishing of offshore fish species and to facilitate comprehensive deep-sea resource evaluation, this paper introduces an improved fish sonar image detection algorithm based on You Only Look Once version 5 (YOLOv5). Sonar image noise often results in blurred targets and indistinct features, thereby reducing the precision of object detection. Thus, the C3N module is designed in the neck component, where depth-separable convolution and an inverse bottleneck layer structure are integrated to lessen feature information loss during downsampling and forward propagation. Furthermore, A shallow feature layer is introduced in the network prediction layer to enhance feature extraction for pixels larger than 4x4. Additionally, Normalized Weighted Distance (NWD) based on a Gaussian distribution is combined with Intersection over Union (IOU) during gradient descent to improve small target detection and mitigate IOU's scale sensitivity. Finally, Traditional Non-Maximum Suppression (NMS) is replaced with Soft-NMS, reducing missed detections due to occlusion and overlapping fish targets common in sonar datasets. Experiments show the improved model surpasses the original model and YOLOv3 with gains in precision, recall, and mean average precision (mAP) of 2.3%, 4.7%, and 2.7%, respectively, and 2.5%, 6.3%, and 6.7%, respectively. These findings confirm the method's effectiveness in raising sonar image detection accuracy, consistent with model comparisons. With Unmanned Underwater Vehicles (UUV) advancements, this method holds the potential to support fish culture decision-making and facilitate fish stock resource assessment.
- 25 April 2023
- Published by Springer Nature in Signal, Image and Video Processing
- Vol. 17 (7) , 3265-3273
DCU-Net transient noise suppression based on joint spectrum estimation
- 25 April 2023
- Published by Springer Nature in Signal, Image and Video Processing
- Vol. 17 (7) , 3265-3273
DCU-Net transient noise suppression based on joint spectrum estimation
- Open Access
- 1 January 2023
- Published by American Institute of Mathematical Sciences (AIMS) in Mathematical Biosciences and Engineering
- Vol. 21 (1) , 1321-1341
Fish sonar image recognition algorithm based on improved YOLOv5
Fish stock assessment is crucial for sustainable marine fisheries management in rangeland ecosystems. To address the challenges posed by the overfishing of offshore fish species and facilitate comprehensive deep-sea resource evaluation, this paper introduces an improved fish sonar image detection algorithm based on the you only look once algorithm, version 5 (YOLOv5). Sonar image noise often results in blurred targets and indistinct features, thereby reducing the precision of object detection. Thus, a C3N module is incorporated into the neck component, where depth-separable convolution and an inverse bottleneck layer structure are integrated to lessen feature information loss during downsampling and forward propagation. Furthermore, lowercase shallow feature layer is introduced in the network prediction layer to enhance feature extraction for pixels larger than $ 4 \times 4 $. Additionally, normalized weighted distance based on a Gaussian distribution is combined with Intersection over Union (IoU) during gradient descent to improve small target detection and mitigate the IoU's scale sensitivity. Finally, traditional non-maximum suppression (NMS) is replaced with soft-NMS, reducing missed detections due to occlusion and overlapping fish targets that are common in sonar datasets. Experiments show that the improved model surpasses the original model and YOLOv3 with gains in precision, recall and mean average precision of 2.3%, 4.7% and 2.7%, respectively, and 2.5%, 6.3% and 6.7%, respectively. These findings confirm the method's effectiveness in raising sonar image detection accuracy, which is consistent with model comparisons. Given Unmanned Underwater Vehicle advancements, this method holds the potential to support fish culture decision-making and facilitate fish stock resource assessment.- 1 January 2023
- Published by American Institute of Mathematical Sciences (AIMS) in Mathematical Biosciences and Engineering
- Vol. 21 (1) , 1321-1341
Open AccessFish sonar image recognition algorithm based on improved YOLOv5
Fish stock assessment is crucial for sustainable marine fisheries management in rangeland ecosystems. To address the challenges posed by the overfishing of offshore fish species and facilitate comprehensive deep-sea resource evaluation, this paper introduces an improved fish sonar image detection algorithm based on the you only look once algorithm, version 5 (YOLOv5). Sonar image noise often results in blurred targets and indistinct features, thereby reducing the precision of object detection. Thus, a C3N module is incorporated into the neck component, where depth-separable convolution and an inverse bottleneck layer structure are integrated to lessen feature information loss during downsampling and forward propagation. Furthermore, lowercase shallow feature layer is introduced in the network prediction layer to enhance feature extraction for pixels larger than $ 4 \times 4 $. Additionally, normalized weighted distance based on a Gaussian distribution is combined with Intersection over Union (IoU) during gradient descent to improve small target detection and mitigate the IoU's scale sensitivity. Finally, traditional non-maximum suppression (NMS) is replaced with soft-NMS, reducing missed detections due to occlusion and overlapping fish targets that are common in sonar datasets. Experiments show that the improved model surpasses the original model and YOLOv3 with gains in precision, recall and mean average precision of 2.3%, 4.7% and 2.7%, respectively, and 2.5%, 6.3% and 6.7%, respectively. These findings confirm the method's effectiveness in raising sonar image detection accuracy, which is consistent with model comparisons. Given Unmanned Underwater Vehicle advancements, this method holds the potential to support fish culture decision-making and facilitate fish stock resource assessment.