Iskra Z. Koleva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Iskra Z. Koleva has a total of 59 co-authors. Here are the top co-authors by number of shared publications:
- Hristiyan A. Aleksandrov
Faculty of Chemistry and Pharmacy, Sofia University “St. Kliment Ohridski”, 1164 Sofia, Bulgaria
14 shared publications - Georgi N. Vayssilov
Faculty of Chemistry and Pharmacy, University of Sofia, 1126 Sofia, Bulgaria
10 shared publications - Rumen Lyapchev
Faculty of Chemistry and Pharmacy, Sofia University “St. Kliment Ohridski”, 1164 Sofia, Bulgaria
4 shared publications - Francesc Viñes
Departament de Ciència de Materials i Química Física & Institut de Química Teòrica i Computacional (IQTCUB), Universitat de Barcelona, c/ Martí i Franquès 1-11, 08028, Barcelona, Spain
3 shared publications - Maria Ivanova
Faculty of Chemistry and Pharmacy, Sofia University, Bulgaria
3 shared publications - Vesela Lozanova
Department of Medical Chemistry and Biochemistry, Medical Faculty, Medical University-Sofia, 2 Zdrave Str., 1431 Sofia, Bulgaria
3 shared publications
Latest Publications
- 29 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (23) , 8000-8011
Understanding the Structure of Ti-Doped Ceria Nanoparticles and Tuning Their Reducibility
- 29 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (23) , 8000-8011
Understanding the Structure of Ti-Doped Ceria Nanoparticles and Tuning Their Reducibility
- Open Access
Surface-Subsurface Preference of S Species on Transition Metal Nanoparticles: A DFT Study
Sulfur is a well-known catalyst poison, particularly for catalysts based on transition metals. Herein, we studied the adsorption of sulfur species on small nanoparticles (~1 nm in size) of the face centered cubic (fcc) transition metals (Rh, Ir, Ni, Pd, Pt, Cu, Ag, and Au) using density functional theory (DFT) modeling. At low sulfur coverage (one S atom per nanoparticle), sulfur preferentially occupies the surface hollow sites of the nanoparticles. At higher coverage, however, the subsurface diffusion of S in Ni, Pd, and Ag nanoparticles becomes energetically favorable with low activation energies. Among the considered metals, sulfur binds most strongly to Rh and Ir, and most weakly to Ag and Au. The present results shed light on the facility of S-poisoning on such metal nanoparticles, either by surface blocking or by underlying sulfurization of the metal.
Open AccessSurface-Subsurface Preference of S Species on Transition Metal Nanoparticles: A DFT Study
Sulfur is a well-known catalyst poison, particularly for catalysts based on transition metals. Herein, we studied the adsorption of sulfur species on small nanoparticles (~1 nm in size) of the face centered cubic (fcc) transition metals (Rh, Ir, Ni, Pd, Pt, Cu, Ag, and Au) using density functional theory (DFT) modeling. At low sulfur coverage (one S atom per nanoparticle), sulfur preferentially occupies the surface hollow sites of the nanoparticles. At higher coverage, however, the subsurface diffusion of S in Ni, Pd, and Ag nanoparticles becomes energetically favorable with low activation energies. Among the considered metals, sulfur binds most strongly to Rh and Ir, and most weakly to Ag and Au. The present results shed light on the facility of S-poisoning on such metal nanoparticles, either by surface blocking or by underlying sulfurization of the metal.
- Open Access
Synthesis of 2-(2-Methoxyphenyl)-4-methyl-6-nitroquinoline and 2-(2-Methoxyphenyl)-4-methylquinolin-6-amine
A new compound, 2-(2-methoxyphenyl)-4-methyl-6-nitroquinoline, was obtained via Suzuki reaction. An unexpected side product, 2-(2-methoxyphenyl)-4-methylquinolin-6-amine, was isolated. The structures of the novel compounds were confirmed by 1H, 13C and 2D-NMR. Their optical properties were also studied.
Open AccessSynthesis of 2-(2-Methoxyphenyl)-4-methyl-6-nitroquinoline and 2-(2-Methoxyphenyl)-4-methylquinolin-6-amine
A new compound, 2-(2-methoxyphenyl)-4-methyl-6-nitroquinoline, was obtained via Suzuki reaction. An unexpected side product, 2-(2-methoxyphenyl)-4-methylquinolin-6-amine, was isolated. The structures of the novel compounds were confirmed by 1H, 13C and 2D-NMR. Their optical properties were also studied.
- Open Access
Impact of Sm3+ Ions on Oxygen Vacancy Formation in Ceria Systems
DFT calculations have been employed to investigate the impact of Sm dopant(s) on the structure and stability of periodic CeO2(111) slab and Ce140O280 nanoparticle systems. We found that substituting Ce ion(s) with Sm ion(s) in the surface layer yields the most favorable doped configurations in both systems. Further, we evaluated how Sm ion(s) modify the reducibility of the systems—a key process in the catalytic applications of ceria. It has been found that a substantial reduction in oxygen vacancy formation energy occurs due to the presence of Sm ion(s), with values of 1.24 and 0.29 eV for mono- and bi-doped CeO2(111), respectively, which are considerably lower than 2.43 eV obtained for the pristine ceria slab. As the system changes from slab to nanoparticle, mono-doping reduces this energy to 0.25 eV—about four times lower than that calculated for the pristine Ce140O280 nanoparticle. The presence of a second Sm ion within the nanoparticle leads to a dramatic decrease in Evac, making the reduction process exothermic. In either slab or nanoparticle models, the Sm3+ ions prefer to be in close proximity to each other, and the formation of oxygen vacancies is most energetically favorable in the vicinity of Sm3+ ions.
Open AccessImpact of Sm3+ Ions on Oxygen Vacancy Formation in Ceria Systems
DFT calculations have been employed to investigate the impact of Sm dopant(s) on the structure and stability of periodic CeO2(111) slab and Ce140O280 nanoparticle systems. We found that substituting Ce ion(s) with Sm ion(s) in the surface layer yields the most favorable doped configurations in both systems. Further, we evaluated how Sm ion(s) modify the reducibility of the systems—a key process in the catalytic applications of ceria. It has been found that a substantial reduction in oxygen vacancy formation energy occurs due to the presence of Sm ion(s), with values of 1.24 and 0.29 eV for mono- and bi-doped CeO2(111), respectively, which are considerably lower than 2.43 eV obtained for the pristine ceria slab. As the system changes from slab to nanoparticle, mono-doping reduces this energy to 0.25 eV—about four times lower than that calculated for the pristine Ce140O280 nanoparticle. The presence of a second Sm ion within the nanoparticle leads to a dramatic decrease in Evac, making the reduction process exothermic. In either slab or nanoparticle models, the Sm3+ ions prefer to be in close proximity to each other, and the formation of oxygen vacancies is most energetically favorable in the vicinity of Sm3+ ions.
- Open Access
- 23 June 2025
- Published by MDPI AG in Pharmaceuticals
- Vol. 18 (7) , 944
Water-Soluble Formulations of Curcumin and Eugenol Produced by Spray Drying
Background/Objectives: In this study, we present a green, scalable platform for the production of water-dispersible powders co-encapsulating the lipophilic bioactives curcumin (Cur) and eugenol (Eug) within the amphiphilic polymer Soluplus® (SP) via low-temperature spray drying. Methods: The amount of Cur (1%, 5%, and 10%) and Eug (5%, 10%, 15%, and 20%) was varied to achieve single- and double-loaded water-soluble powders with the maximum amount of active substances. The powders containing a higher loading of Cur, 5% and 10% (and Eug), were obtained from water/ethanol mixtures (2:1 and 5:1 v/v ratio), while the formulation with 1% of Cur was spray-dried by using water as a solvent. Results: By leveraging aqueous or aqueous–ethanolic feed systems, we achieved high loading of the bioactive substances—up to 10% Cur and 20% Eug (w/w)—while minimizing organic solvent use. Myo-inositol was incorporated as a stabilizing excipient to modulate particle morphology, improve powder flowability, and enhance redispersibility. Physicochemical characterization revealed nanoscale micellization (53–127 nm), amorphization of both actives as confirmed by XRD and DSC, and the absence of crystalline residue. Encapsulation efficiencies exceeded 95% for Cur and 93% for Eug. Dissolution tests demonstrated a rapid release from the 5% Cur/5% Eug formulation (>85% in 5 min), while higher-loaded single-formulations showed progressively slower release (up to 45 min). Conclusions: This work demonstrates a robust and environmentally responsible encapsulation strategy, suitable for delivering poorly water-soluble phytochemicals with potential applications in oral nutraceuticals and pharmaceutical dosage forms.
- 23 June 2025
- Published by MDPI AG in Pharmaceuticals
- Vol. 18 (7) , 944
Open AccessWater-Soluble Formulations of Curcumin and Eugenol Produced by Spray Drying
Background/Objectives: In this study, we present a green, scalable platform for the production of water-dispersible powders co-encapsulating the lipophilic bioactives curcumin (Cur) and eugenol (Eug) within the amphiphilic polymer Soluplus® (SP) via low-temperature spray drying. Methods: The amount of Cur (1%, 5%, and 10%) and Eug (5%, 10%, 15%, and 20%) was varied to achieve single- and double-loaded water-soluble powders with the maximum amount of active substances. The powders containing a higher loading of Cur, 5% and 10% (and Eug), were obtained from water/ethanol mixtures (2:1 and 5:1 v/v ratio), while the formulation with 1% of Cur was spray-dried by using water as a solvent. Results: By leveraging aqueous or aqueous–ethanolic feed systems, we achieved high loading of the bioactive substances—up to 10% Cur and 20% Eug (w/w)—while minimizing organic solvent use. Myo-inositol was incorporated as a stabilizing excipient to modulate particle morphology, improve powder flowability, and enhance redispersibility. Physicochemical characterization revealed nanoscale micellization (53–127 nm), amorphization of both actives as confirmed by XRD and DSC, and the absence of crystalline residue. Encapsulation efficiencies exceeded 95% for Cur and 93% for Eug. Dissolution tests demonstrated a rapid release from the 5% Cur/5% Eug formulation (>85% in 5 min), while higher-loaded single-formulations showed progressively slower release (up to 45 min). Conclusions: This work demonstrates a robust and environmentally responsible encapsulation strategy, suitable for delivering poorly water-soluble phytochemicals with potential applications in oral nutraceuticals and pharmaceutical dosage forms.
- 9 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (16) , 7704-7716
DFT Study of the Stability and Reducibility of Hf-Doped Ceria Nanoparticles
- 9 April 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 129 (16) , 7704-7716
DFT Study of the Stability and Reducibility of Hf-Doped Ceria Nanoparticles
- Open Access
- 31 August 2024
- Published by MDPI AG in Pharmaceuticals
- Vol. 17 (9) , 1156
Efficient Improvement of Eugenol Water Solubility by Spray Drying Encapsulation in Soluplus® and Lutrol F 127
Herein, we present an elegant and simple method for significant improvement of eugenol water solubility using the polymers Soluplus® and Lutrol F 127 as carriers and spray drying as an encapsulation method. The formulations were optimized by adding myo-inositol—a sweetening agent—and Aerosil® 200 (colloidal, fumed silica)—an anticaking agent. The highest encapsulation efficiency of 97.9–98.2% was found for the samples containing 5% eugenol with respect to the mass of Soluplus®. The encapsulation efficiencies of the spray-dried samples with 15% eugenol are around 90%. Although lowering the yield, the addition of Lutrol F 127 results in a more regular particle shape and enhanced powder flowability. The presence of Aerosil® 200 and myo-inositol also improves the rheological powder properties. The obtained formulations can be used in various dosage forms like powders, granules, capsules, creams, and gels.
- 31 August 2024
- Published by MDPI AG in Pharmaceuticals
- Vol. 17 (9) , 1156
Open AccessEfficient Improvement of Eugenol Water Solubility by Spray Drying Encapsulation in Soluplus® and Lutrol F 127
Herein, we present an elegant and simple method for significant improvement of eugenol water solubility using the polymers Soluplus® and Lutrol F 127 as carriers and spray drying as an encapsulation method. The formulations were optimized by adding myo-inositol—a sweetening agent—and Aerosil® 200 (colloidal, fumed silica)—an anticaking agent. The highest encapsulation efficiency of 97.9–98.2% was found for the samples containing 5% eugenol with respect to the mass of Soluplus®. The encapsulation efficiencies of the spray-dried samples with 15% eugenol are around 90%. Although lowering the yield, the addition of Lutrol F 127 results in a more regular particle shape and enhanced powder flowability. The presence of Aerosil® 200 and myo-inositol also improves the rheological powder properties. The obtained formulations can be used in various dosage forms like powders, granules, capsules, creams, and gels.
- Open Access
2-(2,6-Diisopropylphenyl)-1-methylimidazo[1,5-a]quinolin-2-ium Tetrafluoroborate
A new heterocyclic compound, 2-(2,6-diisopropylphenyl)-1-methylimidazo[1,5-a]quinolin-2-ium tetrafluoroborate 1 was obtained from its precursor, N-(2,6-diisopropylphenyl)-N-(quinolin-2-ylmethyl)acetamide 2, by POCl3-mediated cyclization. For the first time, tertiary acetamide 2, the precursor of 1, was synthesized by using commercially available starting materials. The structure of 1 was unquestionably confirmed by 1H, 13C, 2D-NMR, and IR spectroscopies and mass spectrometry. Its optical properties were also studied.
Open Access2-(2,6-Diisopropylphenyl)-1-methylimidazo[1,5-a]quinolin-2-ium Tetrafluoroborate
A new heterocyclic compound, 2-(2,6-diisopropylphenyl)-1-methylimidazo[1,5-a]quinolin-2-ium tetrafluoroborate 1 was obtained from its precursor, N-(2,6-diisopropylphenyl)-N-(quinolin-2-ylmethyl)acetamide 2, by POCl3-mediated cyclization. For the first time, tertiary acetamide 2, the precursor of 1, was synthesized by using commercially available starting materials. The structure of 1 was unquestionably confirmed by 1H, 13C, 2D-NMR, and IR spectroscopies and mass spectrometry. Its optical properties were also studied.
- Open Access
- 6 August 2024
- Published by MDPI AG in Preprints.org
2-(2,6-Diisopropylphenyl)-1-methylimidazo[1,5-a]quinolin-2-ium tetrafluoroborate
A new heterocyclic compound, 2-(2,6-diisopropylphenyl)-1-methylimidazo[1,5-a]quinolin-2-ium tetrafluoroborate 1 was obtained from its precursor, N-(2,6-diisopropylphenyl)-N-(quinolin-2-ylmethyl)acetamide 2, by POCl3-mediated cyclization. For the first time – the tertiary acetamide 2, precursor of 1, was synthesized by using commercially available starting materials. The structure of 1 was unquestionably confirmed by 1H-, 13C-, 2D-NMR-, IR- spectroscopy and mass-spectrometry. Its optical properties were also studied.
- 6 August 2024
- Published by MDPI AG in Preprints.org
Open Access2-(2,6-Diisopropylphenyl)-1-methylimidazo[1,5-a]quinolin-2-ium tetrafluoroborate
A new heterocyclic compound, 2-(2,6-diisopropylphenyl)-1-methylimidazo[1,5-a]quinolin-2-ium tetrafluoroborate 1 was obtained from its precursor, N-(2,6-diisopropylphenyl)-N-(quinolin-2-ylmethyl)acetamide 2, by POCl3-mediated cyclization. For the first time – the tertiary acetamide 2, precursor of 1, was synthesized by using commercially available starting materials. The structure of 1 was unquestionably confirmed by 1H-, 13C-, 2D-NMR-, IR- spectroscopy and mass-spectrometry. Its optical properties were also studied.