Wentao Qian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wentao Qian has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Linwei Yu
Nanjing University
9 shared publications - Junzhuan Wang
School of Electronic Science and Engineering, Nanjing University, Nanjing 210093, China
6 shared publications Junzhuan Wang
Nanjing University
3 shared publications- Le Weng
Nanjing University
3 shared publications - Wei Liao
Nanjing University
3 shared publications - Guanqiao Sang
Nanjing University
2 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (11) , 6866-6870
Low-Temperature Nanoscale Additive Manufacturing of High Performance Gate-All-Around Field Effect Transistors
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (11) , 6866-6870
Low-Temperature Nanoscale Additive Manufacturing of High Performance Gate-All-Around Field Effect Transistors
- 28 October 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (44) , 30329-30337
Exceptionally Matched p-SiNW/n-IGZO Complementary Field-Effect Transistors for Monolithic 3D Logic
Monolithic three-dimensional (M3D) complementary field-effect transistors (CFETs) provide a route toward a higher logic density by vertically stacking complementary devices within the same footprint. Their realization through heterogeneous integration requires p- and n-channel transistors that are both individually high-performing and electrically matched. Here, we demonstrate high-performance heterogeneous Si/oxide M3D CFETs by vertically integrating p-type silicon nanowire (p-SiNW) FETs with n-type indium gallium zinc oxide (n-IGZO) transistors. The site-controlled p-SiNWs are formed through a scalable in-plane solid–liquid–solid (IPSLS) process without postgrowth hydrogen passivation, facilitating subsequent oxide–semiconductor integration. The vertically integrated p- and n-channel devices exhibit closely matched current-driving capabilities, near-zero threshold voltages, and subthreshold swings of 120 and 133 mV dec–1, respectively. This exceptional p/n matching enables sharp and well-balanced switching, yielding a peak voltage gain of 103 V/V at VDD = 5 V, a normalized gain of 20.6 V–1, and large, nearly symmetric noise margins (NML = 0.45 VDD and NMH = 0.44 VDD). The architecture is further extended to NOR, NAND, and OR gates with experimentally verified logic operations. These results establish a high-performance heterogeneous Si/oxide integration platform for dense and robust M3D complementary logic.
- 28 October 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (44) , 30329-30337
Exceptionally Matched p-SiNW/n-IGZO Complementary Field-Effect Transistors for Monolithic 3D Logic
Monolithic three-dimensional (M3D) complementary field-effect transistors (CFETs) provide a route toward a higher logic density by vertically stacking complementary devices within the same footprint. Their realization through heterogeneous integration requires p- and n-channel transistors that are both individually high-performing and electrically matched. Here, we demonstrate high-performance heterogeneous Si/oxide M3D CFETs by vertically integrating p-type silicon nanowire (p-SiNW) FETs with n-type indium gallium zinc oxide (n-IGZO) transistors. The site-controlled p-SiNWs are formed through a scalable in-plane solid–liquid–solid (IPSLS) process without postgrowth hydrogen passivation, facilitating subsequent oxide–semiconductor integration. The vertically integrated p- and n-channel devices exhibit closely matched current-driving capabilities, near-zero threshold voltages, and subthreshold swings of 120 and 133 mV dec–1, respectively. This exceptional p/n matching enables sharp and well-balanced switching, yielding a peak voltage gain of 103 V/V at VDD = 5 V, a normalized gain of 20.6 V–1, and large, nearly symmetric noise margins (NML = 0.45 VDD and NMH = 0.44 VDD). The architecture is further extended to NOR, NAND, and OR gates with experimentally verified logic operations. These results establish a high-performance heterogeneous Si/oxide integration platform for dense and robust M3D complementary logic.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (10) , 2063-2066
High-Performance S/D-First IGZO TFTs Integrated With p-Type Si Nanowire FETs for Complementary Logic
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 47 (10) , 2063-2066
High-Performance S/D-First IGZO TFTs Integrated With p-Type Si Nanowire FETs for Complementary Logic
- Open Access
- 7 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (72) , e77601
Polarity‐Addressed Reset Stabilizes Schottky SiNW‐FET Reservoir Computing for Continuous Event‐Stream Inference
In‐materia reservoir computing is typically benchmarked in segmented regimes where implicit re‐initialization masks long‐term state accumulation. Under continuous, nonstationary drive, however, multi‐timescale device dynamics can retain activity‐dependent residuals that fail to relax to a reproducible baseline, leading to drift and accuracy loss. We introduce reset‐aware physical reservoir computing, where electrical reset is promoted to an addressable, input‐decoupled system operation that can be sparsely triggered by online drift statistics. Trap‐engineered Schottky silicon nanowire FETs (SiNW‐FETs) realize this concept: interfacial trap kinetics and Schottky‐barrier modulation yield multi‐timescale fading memory, while source–drain polarity reversal provides a device‐native erase path independent of gate updates. Using the in‐plane solid–liquid–solid (IPSLS) growth mechanism, aligned SiNW arrays with diameters of ∼20 nm are obtained and integrated into a complementary metal‐oxide semiconductor (CMOS) compatible, addressable 4×4 top‐gated SiNW‐FET array. On a standard event‐based gesture‐recognition benchmark under continuous streaming inference, sparse reverse‐bias erase suppresses drift and sustains >90% accuracy, whereas erase‐free streaming drops abruptly by ∼20% during prolonged operation. These results establish a CMOS‐compatible in‐materia reservoir with explicit, controllable state management for robust continuous event‐driven inference.
- 7 August 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (72) , e77601
Open AccessPolarity‐Addressed Reset Stabilizes Schottky SiNW‐FET Reservoir Computing for Continuous Event‐Stream Inference
In‐materia reservoir computing is typically benchmarked in segmented regimes where implicit re‐initialization masks long‐term state accumulation. Under continuous, nonstationary drive, however, multi‐timescale device dynamics can retain activity‐dependent residuals that fail to relax to a reproducible baseline, leading to drift and accuracy loss. We introduce reset‐aware physical reservoir computing, where electrical reset is promoted to an addressable, input‐decoupled system operation that can be sparsely triggered by online drift statistics. Trap‐engineered Schottky silicon nanowire FETs (SiNW‐FETs) realize this concept: interfacial trap kinetics and Schottky‐barrier modulation yield multi‐timescale fading memory, while source–drain polarity reversal provides a device‐native erase path independent of gate updates. Using the in‐plane solid–liquid–solid (IPSLS) growth mechanism, aligned SiNW arrays with diameters of ∼20 nm are obtained and integrated into a complementary metal‐oxide semiconductor (CMOS) compatible, addressable 4×4 top‐gated SiNW‐FET array. On a standard event‐based gesture‐recognition benchmark under continuous streaming inference, sparse reverse‐bias erase suppresses drift and sustains >90% accuracy, whereas erase‐free streaming drops abruptly by ∼20% during prolonged operation. These results establish a CMOS‐compatible in‐materia reservoir with explicit, controllable state management for robust continuous event‐driven inference.
- 23 April 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (20) , 6611-6618
̀ Nanoscale Additive Manufacturing of Sub-24 nm Spacing Silicon Nanowire Arrays and High-Performance GAA FET Based on SiO 2 /SiN x Stacked Multilayers
Deploying gate-all-around (GAA) field effect transistors (FETs) in the back-end-of-line (BEOL) represents a promising pathway to extend Moore's law. Although the in-plane solid-liquid-solid (IPSLS) approach can produce planar silicon nanowires (SiNWs) with precise positions and alignment at low temperatures, the SiNW density should be further enhanced for higher integration density. Here, we employed SiO2/SiNx stacked multilayers to fabricate ultranarrow guiding steps with controllable widths of 30-75 nm via conventional lithography, followed by producing dense ordered SiNWs with diameters of 25.9 ± 2.0 nm, horizontal pitches of 21.3 ± 2.3 nm, and vertical spacing of 107 and a steep subthreshold swing of ∼63.3 mV/dec. These results underscore the potential of IPSLS growth as a wafer-free additive manufacturing route in BEOL for monolithic 3D integration.
- 23 April 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (20) , 6611-6618
̀ Nanoscale Additive Manufacturing of Sub-24 nm Spacing Silicon Nanowire Arrays and High-Performance GAA FET Based on SiO 2 /SiN x Stacked Multilayers
Deploying gate-all-around (GAA) field effect transistors (FETs) in the back-end-of-line (BEOL) represents a promising pathway to extend Moore's law. Although the in-plane solid-liquid-solid (IPSLS) approach can produce planar silicon nanowires (SiNWs) with precise positions and alignment at low temperatures, the SiNW density should be further enhanced for higher integration density. Here, we employed SiO2/SiNx stacked multilayers to fabricate ultranarrow guiding steps with controllable widths of 30-75 nm via conventional lithography, followed by producing dense ordered SiNWs with diameters of 25.9 ± 2.0 nm, horizontal pitches of 21.3 ± 2.3 nm, and vertical spacing of 107 and a steep subthreshold swing of ∼63.3 mV/dec. These results underscore the potential of IPSLS growth as a wafer-free additive manufacturing route in BEOL for monolithic 3D integration.
- 2 October 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (43) , 25044-25049
Enhanced stretchability and stability of micro-hole-mesh electrodes via a crack-guiding notch design
This novel hole-mesh electrode with crack-guiding notches disperses and releases localized stress controllably, maintaining structural and electrical integrity under 26.7% stretch and stable conductivity over 170 cycles at 20% strain.
- 2 October 2025
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (43) , 25044-25049
Enhanced stretchability and stability of micro-hole-mesh electrodes via a crack-guiding notch design
This novel hole-mesh electrode with crack-guiding notches disperses and releases localized stress controllably, maintaining structural and electrical integrity under 26.7% stretch and stable conductivity over 170 cycles at 20% strain.
- 2 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (22)
Diameter scaling limit of catalytic silicon nanowires confined by optimized ultrafine sidewall grooves
The fabrication of quasi-one-dimensional silicon nanowires (SiNWs) with ultrathin diameters below 10 nm is crucial for enhancing field-effect control in state-of-the-art transistors and is beneficial for building high-performance optoelectronics and biosensors. In this study, we explore the limits of diameter control during the catalytic growth of SiNWs by using an in-plane solid–liquid–solid (IPSLS) mechanism, where SiNWs are guided and confined within narrow sidewall grooves. To achieve tighter growth confinement, a selective etching strategy was developed to produce stable and significantly finer guiding grooves, with heights, depths, and pitches of 15, 16, and 10 nm, respectively. Notably, this innovative groove design enables the production of parallel arrays of ultrathin, monocrystalline-like SiNWs, achieving critical cross-sectional dimensions smaller than 6 nm in one direction or less than 10 nm in both directions. Additionally, we propose a driving-energy-parity model that establishes a lower-bound diameter limit for IPSLS-grown SiNWs at approximately 2.5–4.2 nm. This finding indicates that further dimensional scaling remains feasible by employing even finer sidewall grooves. These results underscore the potential for scaling down ultrathin SiNWs, which is vital for exploring high-performance microelectronics based on a catalytic growth integration strategy.
- 2 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (22)
Diameter scaling limit of catalytic silicon nanowires confined by optimized ultrafine sidewall grooves
The fabrication of quasi-one-dimensional silicon nanowires (SiNWs) with ultrathin diameters below 10 nm is crucial for enhancing field-effect control in state-of-the-art transistors and is beneficial for building high-performance optoelectronics and biosensors. In this study, we explore the limits of diameter control during the catalytic growth of SiNWs by using an in-plane solid–liquid–solid (IPSLS) mechanism, where SiNWs are guided and confined within narrow sidewall grooves. To achieve tighter growth confinement, a selective etching strategy was developed to produce stable and significantly finer guiding grooves, with heights, depths, and pitches of 15, 16, and 10 nm, respectively. Notably, this innovative groove design enables the production of parallel arrays of ultrathin, monocrystalline-like SiNWs, achieving critical cross-sectional dimensions smaller than 6 nm in one direction or less than 10 nm in both directions. Additionally, we propose a driving-energy-parity model that establishes a lower-bound diameter limit for IPSLS-grown SiNWs at approximately 2.5–4.2 nm. This finding indicates that further dimensional scaling remains feasible by employing even finer sidewall grooves. These results underscore the potential for scaling down ultrathin SiNWs, which is vital for exploring high-performance microelectronics based on a catalytic growth integration strategy.
- Open Access
- 24 April 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (17)
Converging-guiding-track design enables 100% growth deployment rate of ultrathin monocrystalline silicon nanowire channels
A low temperature catalytic growth of orderly ultrathin silicon nanowires (SiNWs) is desirable for the construction of monolithic 3D stacked electronics but usually suffers a large diameter fluctuation and a low growth deployment rate (GDR). In this work, the ultra-confined growth dynamics of in-plane solid–liquid–solid SiNWs within narrow groove tracks has been systematically investigated, and a converging-guiding-track strategy is proposed and testified to accomplish 100% GDR of ultra-dense and uniform SiNW array, with diameter and spacing of only Dnw = 22.5±3.5 nm and 25 nm, respectively. Despite a low temperature growth at 350 °C, the SiNWs are found to be all monocrystalline and Si⟨100⟩ oriented, while prototype Schottky barrier tunneling field effect transistors built on the SiNW channels demonstrate a high Ion/off ratio and subthreshold swing of >105 and 197 mV dec−1. This new strategy complements a long-missing key capability of catalytic growth approach to serve a reliable integration technology of ultrafine high quality 1D c-Si channels, without the need of preexisting wafer substrate, for a wide range of 3D electronics, neuromorphic, and logic-in-memory functionalities.
- 24 April 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (17)
Open AccessConverging-guiding-track design enables 100% growth deployment rate of ultrathin monocrystalline silicon nanowire channels
A low temperature catalytic growth of orderly ultrathin silicon nanowires (SiNWs) is desirable for the construction of monolithic 3D stacked electronics but usually suffers a large diameter fluctuation and a low growth deployment rate (GDR). In this work, the ultra-confined growth dynamics of in-plane solid–liquid–solid SiNWs within narrow groove tracks has been systematically investigated, and a converging-guiding-track strategy is proposed and testified to accomplish 100% GDR of ultra-dense and uniform SiNW array, with diameter and spacing of only Dnw = 22.5±3.5 nm and 25 nm, respectively. Despite a low temperature growth at 350 °C, the SiNWs are found to be all monocrystalline and Si⟨100⟩ oriented, while prototype Schottky barrier tunneling field effect transistors built on the SiNW channels demonstrate a high Ion/off ratio and subthreshold swing of >105 and 197 mV dec−1. This new strategy complements a long-missing key capability of catalytic growth approach to serve a reliable integration technology of ultrafine high quality 1D c-Si channels, without the need of preexisting wafer substrate, for a wide range of 3D electronics, neuromorphic, and logic-in-memory functionalities.