Mingshuo Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mingshuo Zhang has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Haiding Sun
University of Science and Technology of China
7 shared publications - Haochen Zhang
GaN Laboratory, School of Microelectronics, University of Science and Technology of China, Hefei, China
7 shared publications - Lei Yang
GaN Laboratory, School of Microelectronics, University of Science and Technology of China, Hefei, China
5 shared publications Hu Wang
School of Microelectronics, iGaN Laboratory, Uni. Sci. Tech China, Hefei, China
4 shared publications- Yi Pei
Dynax Semiconductor Inc, Suzhou, China
4 shared publications - Chengjie Zuo
University of Science and Technology of China
3 shared publications
Latest Publications
- 25 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. PP (07413106) , 1
Regrown-Ohmic-Contacts Enabled GaN HEMTs with Ultra-Low Noise Figures and Superior Power Merits for Wide-Band LNA Applications
Herein, based on MOCVD-regrown ohmic contacts (ROCs), a GaN HEMT with ultra-low noise figure and superior power merit is reported. Thanks to the ROCs, a low contact resistance of 0.13 Ω·mm is achieved, benefiting 26% reduced parasitic source resistance compared to the devices with alloyed ohmic contacts. As such, the ROC-HEMT shows reduced thermal noise and ultra-low minimum noise figures within a wide bandwidth, featuring 0.38/0.71/1.19 dB at 10/18/30 GHz with associated gain of 12.5/9.8/6.6 dB. In addition, remarkable output power and efficiency at Ku-band can be delivered by the ROC-HEMT, verifying the feasibility of MOCVD-ROC techniques to advance noise & power performance of GaN HEMTs towards compact all-GaN RF front-end modules.
- 25 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. PP (07413106) , 1
Regrown-Ohmic-Contacts Enabled GaN HEMTs with Ultra-Low Noise Figures and Superior Power Merits for Wide-Band LNA Applications
Herein, based on MOCVD-regrown ohmic contacts (ROCs), a GaN HEMT with ultra-low noise figure and superior power merit is reported. Thanks to the ROCs, a low contact resistance of 0.13 Ω·mm is achieved, benefiting 26% reduced parasitic source resistance compared to the devices with alloyed ohmic contacts. As such, the ROC-HEMT shows reduced thermal noise and ultra-low minimum noise figures within a wide bandwidth, featuring 0.38/0.71/1.19 dB at 10/18/30 GHz with associated gain of 12.5/9.8/6.6 dB. In addition, remarkable output power and efficiency at Ku-band can be delivered by the ROC-HEMT, verifying the feasibility of MOCVD-ROC techniques to advance noise & power performance of GaN HEMTs towards compact all-GaN RF front-end modules.
- 1 March 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (12)
Thick-AlN-barrier AlN/GaN-based HEMTs with superior power and noise performance for low-voltage RF front-end applications
Herein, we report a thick-AlN-barrier (TAB) based AlN/GaN RF HEMT with remarkable power performance at low voltage for sub-6G applications. Featuring a 7 nm AlN barrier layer and the regrown n+-GaN Ohmic contacts, the device shows low sheet and contact resistances, leading to 1.6-A/mm output current, 3-V knee voltage, and consequent 75% power-added efficiency (PAE) and 1.3-W/mm output power density (Pout) at 2.6 GHz and 6-V drain voltage (VDS). This PAE-Pout result represents the state-of-the-art levels of low-voltage power amplifiers (LV PAs) for sub-6G applications. Meanwhile, the TAB-HEMT is found to exhibit satisfactory linearity and noise performance as well. The OIP3 (output third-order intercept point) value of 35.3 dBm is obtained at 6-V VDS, thanks to the elaborately designed thick AlN barrier. A minimum noise figure (NFmin) as low as 0.32 dB at 2.6 GHz and VDS = 6 V is achieved thanks to the suppressed thermal noise enabled by low channel resistance. These results highlight the potential of the TAB-HEMT as an all-around and compact device platform for LV RF front-end-module applications.
- 1 March 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (12)
Thick-AlN-barrier AlN/GaN-based HEMTs with superior power and noise performance for low-voltage RF front-end applications
Herein, we report a thick-AlN-barrier (TAB) based AlN/GaN RF HEMT with remarkable power performance at low voltage for sub-6G applications. Featuring a 7 nm AlN barrier layer and the regrown n+-GaN Ohmic contacts, the device shows low sheet and contact resistances, leading to 1.6-A/mm output current, 3-V knee voltage, and consequent 75% power-added efficiency (PAE) and 1.3-W/mm output power density (Pout) at 2.6 GHz and 6-V drain voltage (VDS). This PAE-Pout result represents the state-of-the-art levels of low-voltage power amplifiers (LV PAs) for sub-6G applications. Meanwhile, the TAB-HEMT is found to exhibit satisfactory linearity and noise performance as well. The OIP3 (output third-order intercept point) value of 35.3 dBm is obtained at 6-V VDS, thanks to the elaborately designed thick AlN barrier. A minimum noise figure (NFmin) as low as 0.32 dB at 2.6 GHz and VDS = 6 V is achieved thanks to the suppressed thermal noise enabled by low channel resistance. These results highlight the potential of the TAB-HEMT as an all-around and compact device platform for LV RF front-end-module applications.
- 6 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (6) , 5661-5671
Accurate Modeling of GaN HEMTs and MMICs for Cryogenic Electronics Applications Utilizing Artificial Neural Network
The prosperity of quantum computing has boosted the development of cryogenic electronics. The wide bandgap GaN-based devices show the potential to develop such cryogenic systems thanks to their decent characteristics in harsh environments. However, robust and reliable device & circuit models for GaN devices are still absent and urgently in demands. Herein, we report an artificial neural network (ANN) based compact model for both device- and circuit-level characteristics of GaN HEMTs within a wide temperature range from 300 to 4.2 K. Based on the built ANN architecture, the DC and RF device models are produced which can quickly capture and predict the relationship between device performance and multiple variables including ambient temperatures, operating frequencies, biased voltages, and device sizes, with high accuracy over 99%. Furthermore, the ANN models are implemented in the circuit design of a GaN monolithic microwave integrated circuit (MMIC), showing a mean relative error (MRE) value of less than 4% under both 300 K and 4.2 K compared with measured results. These results verified the robustness and generalization abilities of the proposed ANN models in the tape-out production of GaN-based devices and circuits for future quantum and cryogenic electronics applications.
- 6 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 12 (6) , 5661-5671
Accurate Modeling of GaN HEMTs and MMICs for Cryogenic Electronics Applications Utilizing Artificial Neural Network
The prosperity of quantum computing has boosted the development of cryogenic electronics. The wide bandgap GaN-based devices show the potential to develop such cryogenic systems thanks to their decent characteristics in harsh environments. However, robust and reliable device & circuit models for GaN devices are still absent and urgently in demands. Herein, we report an artificial neural network (ANN) based compact model for both device- and circuit-level characteristics of GaN HEMTs within a wide temperature range from 300 to 4.2 K. Based on the built ANN architecture, the DC and RF device models are produced which can quickly capture and predict the relationship between device performance and multiple variables including ambient temperatures, operating frequencies, biased voltages, and device sizes, with high accuracy over 99%. Furthermore, the ANN models are implemented in the circuit design of a GaN monolithic microwave integrated circuit (MMIC), showing a mean relative error (MRE) value of less than 4% under both 300 K and 4.2 K compared with measured results. These results verified the robustness and generalization abilities of the proposed ANN models in the tape-out production of GaN-based devices and circuits for future quantum and cryogenic electronics applications.
- 25 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (8) , 4590-4595
Structural and Electrical Characteristics of GaN HEMTs With In Situ SiN x Gate Dielectrics Grown by Rationally Modulated N2/H2 Carrier Gas
In situ SiNx is recognized as a promising dielectric and passivation layer for GaN high-electron-mobility transistors (HEMTs). Herein, the growth mechanisms and material properties of the in situ SiNx are studied by comparing the dielectrics grown under three different carrier gases including N2 (N2-SiNx), H2 (H2-SiNx), and mixed N2/H2 atmosphere (N/H-SiNx). It is found that the growth rates (GRs) of three types of in situ SiNx always follow the relationship of N2-${\text {SiN}}_{x}~\gt $ N/H-${\text {SiN}}_{x}~\gt $ H2-SiNx, due to the prohibition effect of H2 on the forward SiH4 + NH3 reaction. In addition, thanks to the H2 incorporation, the surface morphologies and interface quality of both H2- and N/H-SiNx are improved compared with those of N2-SiNx, enabled by the uniform in situ H2 etching to the AlGaN barrier. Interestingly, the N/H-SiNx passivated HEMT shows smaller capacitance-voltage dispersion/hysteresis and improved device stability under long-term electrical stress than the H2-SiNx passivated device. This can be attributed to reduced and milder H2 etching to the device, “diluted” by N2 carrier gas, leading to less surface damage. These results provide possible guidance for further modulation of in situ SiNx growth schemes toward the stable operation of GaN HEMTs.- 25 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (8) , 4590-4595
Structural and Electrical Characteristics of GaN HEMTs With In Situ SiN x Gate Dielectrics Grown by Rationally Modulated N2/H2 Carrier Gas
In situ SiNx is recognized as a promising dielectric and passivation layer for GaN high-electron-mobility transistors (HEMTs). Herein, the growth mechanisms and material properties of the in situ SiNx are studied by comparing the dielectrics grown under three different carrier gases including N2 (N2-SiNx), H2 (H2-SiNx), and mixed N2/H2 atmosphere (N/H-SiNx). It is found that the growth rates (GRs) of three types of in situ SiNx always follow the relationship of N2-${\text {SiN}}_{x}~\gt $ N/H-${\text {SiN}}_{x}~\gt $ H2-SiNx, due to the prohibition effect of H2 on the forward SiH4 + NH3 reaction. In addition, thanks to the H2 incorporation, the surface morphologies and interface quality of both H2- and N/H-SiNx are improved compared with those of N2-SiNx, enabled by the uniform in situ H2 etching to the AlGaN barrier. Interestingly, the N/H-SiNx passivated HEMT shows smaller capacitance-voltage dispersion/hysteresis and improved device stability under long-term electrical stress than the H2-SiNx passivated device. This can be attributed to reduced and milder H2 etching to the device, “diluted” by N2 carrier gas, leading to less surface damage. These results provide possible guidance for further modulation of in situ SiNx growth schemes toward the stable operation of GaN HEMTs.- 17 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (7) , 1157-1160
2DEG-Concentration-Modulated High-Power-Density AlGaN/GaN RF HEMTs
Herein, by modulating 2DEG concentration ( n s ), a superior GaN RF HEMT with a high-Al-content AlGaN barrier is reported for high power-density ( P out ) X-band applications. Thanks to a high n s of 1.3×10 13 cm -2 enabled by the Al 0.32 Ga 0.68 N barrier, as well as the regrown n + -GaN ohmic contacts, the device exhibits an output drain current ( I D ) of 1.6 A/mm, an on-resistance ( R ON ) of 1.10 Ω·mm, and maintain a breakdown electric field ( E BC ) of ~0.8 MV/cm. As a result, at 10 GHz, P out of 10.4 W/mm and power-added efficiency (PAE) of 63.2% are obtained at a moderate drain bias ( V D ) of 28 V. Notably, the results of I D – E BC , P out – V D , and the figure-of-merit P out / V D of our device marks one of the best records among X-band GaN HEMTs, showing strong competitiveness of high-Al-content AlGaN/GaN HEMTs for high- P out RF applications.
- 17 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (7) , 1157-1160
2DEG-Concentration-Modulated High-Power-Density AlGaN/GaN RF HEMTs
Herein, by modulating 2DEG concentration ( n s ), a superior GaN RF HEMT with a high-Al-content AlGaN barrier is reported for high power-density ( P out ) X-band applications. Thanks to a high n s of 1.3×10 13 cm -2 enabled by the Al 0.32 Ga 0.68 N barrier, as well as the regrown n + -GaN ohmic contacts, the device exhibits an output drain current ( I D ) of 1.6 A/mm, an on-resistance ( R ON ) of 1.10 Ω·mm, and maintain a breakdown electric field ( E BC ) of ~0.8 MV/cm. As a result, at 10 GHz, P out of 10.4 W/mm and power-added efficiency (PAE) of 63.2% are obtained at a moderate drain bias ( V D ) of 28 V. Notably, the results of I D – E BC , P out – V D , and the figure-of-merit P out / V D of our device marks one of the best records among X-band GaN HEMTs, showing strong competitiveness of high-Al-content AlGaN/GaN HEMTs for high- P out RF applications.
- 25 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (5) , 853-856
GaN-Based HEMT-Type VUV Phototransistors With Superior Triple-Mode Photodetection
In this work, a superior vacuum UV phototransistor (VUV PT) in the form of GaN-based HEMT architecture is demonstrated. With tunable gate/drain bias (VGS/VDS), the HEMT-type VUV PT is switchable among three detection modes including photoconduction (–5/10 V), photovoltaics (±0.05/0 V), and self-powering (0/0 V). Strikingly, the device demonstrates record-high responsivity and detectivity under all the operation modes thanks to structural advantages in AlGaN/GaN heterojunction, including the shallow active region, unique band inclinations, and stable surface conditions. Our work highlights the great abilities of GaN-based HEMT as a promising platform to build multi-functional photoelectric systems.
- 25 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 45 (5) , 853-856
GaN-Based HEMT-Type VUV Phototransistors With Superior Triple-Mode Photodetection
In this work, a superior vacuum UV phototransistor (VUV PT) in the form of GaN-based HEMT architecture is demonstrated. With tunable gate/drain bias (VGS/VDS), the HEMT-type VUV PT is switchable among three detection modes including photoconduction (–5/10 V), photovoltaics (±0.05/0 V), and self-powering (0/0 V). Strikingly, the device demonstrates record-high responsivity and detectivity under all the operation modes thanks to structural advantages in AlGaN/GaN heterojunction, including the shallow active region, unique band inclinations, and stable surface conditions. Our work highlights the great abilities of GaN-based HEMT as a promising platform to build multi-functional photoelectric systems.
- Open Access
- 24 April 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (17)
Effect of in-situ SiNx grown with different carrier gas on structural and electrical properties of GaN-based MISHEMTs
In this work, the effect of in situ SiNx grown with different carrier gas on the structural and electrical properties of the SiNx/AlGaN/GaN MIS-HEMTs is studied. It was found that the growth rate of SiNx grown with N2 as carrier gas (N2-SiNx) is more sensitive to different growth conditions, while the growth rate of SiNx grown with H2 as carrier gas (H2-SiNx) is very stable due to the inhibiting effects of H2 carrier gas on the SiH4–NH3 forward reactions. More importantly, a continuous and smooth SiNx growth at the initial stage can be realized with H2 carrier gas due to its faster surface migration, leading to a decent surface morphology and sharp interface of H2-SiNx. As a result, the SiNx passivated device with H2 as carrier gas shows improved performance compared to that with N2 as carrier gas, featuring ultra-low interface-state density of 2.8 × 1010 cm−2 eV−1, improved on- and off-state current, reduced threshold voltage shift, and mitigated current collapse, especially after long-term electrical stress. These results not only elaborate on the growth mechanisms of in situ SiNx with different carrier gases but also highlight the advances of H2 as carrier gas for in situ SiNx growth, providing an effective strategy to tailor the passivation schemes for GaN-based devices.
- 24 April 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (17)
Open AccessEffect of in-situ SiNx grown with different carrier gas on structural and electrical properties of GaN-based MISHEMTs
In this work, the effect of in situ SiNx grown with different carrier gas on the structural and electrical properties of the SiNx/AlGaN/GaN MIS-HEMTs is studied. It was found that the growth rate of SiNx grown with N2 as carrier gas (N2-SiNx) is more sensitive to different growth conditions, while the growth rate of SiNx grown with H2 as carrier gas (H2-SiNx) is very stable due to the inhibiting effects of H2 carrier gas on the SiH4–NH3 forward reactions. More importantly, a continuous and smooth SiNx growth at the initial stage can be realized with H2 carrier gas due to its faster surface migration, leading to a decent surface morphology and sharp interface of H2-SiNx. As a result, the SiNx passivated device with H2 as carrier gas shows improved performance compared to that with N2 as carrier gas, featuring ultra-low interface-state density of 2.8 × 1010 cm−2 eV−1, improved on- and off-state current, reduced threshold voltage shift, and mitigated current collapse, especially after long-term electrical stress. These results not only elaborate on the growth mechanisms of in situ SiNx with different carrier gases but also highlight the advances of H2 as carrier gas for in situ SiNx growth, providing an effective strategy to tailor the passivation schemes for GaN-based devices.