Nour Ahmed Marey
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nour Ahmed Marey has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Amman Ali Ali
Arab Academy for Science, Technology and Maritime Transport (AASTMT)
2 shared publicationsAhmed Abdul Salam Taha
Arab Academy for Science, Technology and Maritime Transport (AASTMT)
1 shared publicationAmman A Ali
1 shared publication- Amman A. Ali
Institute of Maritime Upgrading Studies, Arab Academy for Science, Technology and Maritime Transport
1 shared publication - Amman Ali
Arab Academy for Science, Technology and Maritime Transport
1 shared publication - El-Sayed H. Hegazy
Port Said University
1 shared publication
Latest Publications
- 17 January 2024
- Published by Springer Nature
- p. 763-777
Examining the Behaviour of Lubricating Oil Film Within Marine Journal Bearing Under Emergency and Critical Operational Conditions
- 17 January 2024
- Published by Springer Nature
- p. 763-777
Examining the Behaviour of Lubricating Oil Film Within Marine Journal Bearing Under Emergency and Critical Operational Conditions
- 12 November 2023
- Published by Egyptian Knowledge Bank in Port-Said Engineering Research Journal
Experimental and Theoretical Investigation for Shaft Journal Bearing Lubrication Performance
Hydrodynamic lubrication is definitely one of the foremost factors upon which the load carrying capacity within journal bearing mainly rely. Therefore, maintaining journal bearing lubrication away from boundary and transient lubrication regions is so instrumental in avoiding journal bearing wear. Accordingly, Universal Journal Bearing Test Rig (UJBTR) was specifically used for conducting wide range tests related to the versatile operational parameters utilizing different oil grades. Those were examined at the variable shaft speeds from 300 rpm up to 600 rpm, under the different applied loads from 50 〖kg〗_f up to 510 〖kg〗_f. The derived results were verified theoretically, where the error percentage hasn't exceeded 5.9 %. In light of the conducted study, oil film pressure was assured to rise with the increase of oil viscosity, loads, and speeds. For more detailed discussion, a dimensionless analysis was carried out to identify the impact percentage for viscosity, speed, and load on the hydrodynamic lubrication. It is observed that increasing load by 60 % had a considerable impact regarding the coefficient of friction where it reduced by 89 %. However, it turned out to have very negative impacts on hydrodynamic lubrication, where the hydrodynamic lubrication has moved into the hazardous boundary lubrication region. Based on the derived outcomes, operational factors are crucial impacts that shape journal bearing behavior considerably in real operating conditions either positively or negatively. Consequently, much consideration must be given to the selection of such factors so as to maintain and possibly enhance journal bearing performance.
- 12 November 2023
- Published by Egyptian Knowledge Bank in Port-Said Engineering Research Journal
Experimental and Theoretical Investigation for Shaft Journal Bearing Lubrication Performance
Hydrodynamic lubrication is definitely one of the foremost factors upon which the load carrying capacity within journal bearing mainly rely. Therefore, maintaining journal bearing lubrication away from boundary and transient lubrication regions is so instrumental in avoiding journal bearing wear. Accordingly, Universal Journal Bearing Test Rig (UJBTR) was specifically used for conducting wide range tests related to the versatile operational parameters utilizing different oil grades. Those were examined at the variable shaft speeds from 300 rpm up to 600 rpm, under the different applied loads from 50 〖kg〗_f up to 510 〖kg〗_f. The derived results were verified theoretically, where the error percentage hasn't exceeded 5.9 %. In light of the conducted study, oil film pressure was assured to rise with the increase of oil viscosity, loads, and speeds. For more detailed discussion, a dimensionless analysis was carried out to identify the impact percentage for viscosity, speed, and load on the hydrodynamic lubrication. It is observed that increasing load by 60 % had a considerable impact regarding the coefficient of friction where it reduced by 89 %. However, it turned out to have very negative impacts on hydrodynamic lubrication, where the hydrodynamic lubrication has moved into the hazardous boundary lubrication region. Based on the derived outcomes, operational factors are crucial impacts that shape journal bearing behavior considerably in real operating conditions either positively or negatively. Consequently, much consideration must be given to the selection of such factors so as to maintain and possibly enhance journal bearing performance.
- Open Access
- 24 September 2023
- Published by Elsevier in Alexandria Engineering Journal
- Vol. 81, 532-547
Experimental study on hydro- thermal behavior of journal bearing oil film profile in a slow speed diesel engine
- 24 September 2023
- Published by Elsevier in Alexandria Engineering Journal
- Vol. 81, 532-547
Open AccessExperimental study on hydro- thermal behavior of journal bearing oil film profile in a slow speed diesel engine
- Open Access
- 27 April 2023
- Published by Elsevier in Alexandria Engineering Journal
- Vol. 73, 11-26
Novel measurement and control system of universal journal bearing test rig for marine applications
- 27 April 2023
- Published by Elsevier in Alexandria Engineering Journal
- Vol. 73, 11-26
Open AccessNovel measurement and control system of universal journal bearing test rig for marine applications
- 10 April 2023
- Published by Egyptian Knowledge Bank in Port-Said Engineering Research Journal
Experimental Evaluation of the Effect of Oil Supply Pressure related to Marine Slow Speed Diesel Engine on Oil Film Pressure and Temperature Profiles within Journal Bearing
Marine journal bearing is so often subject to the risk resulting from the loss of lubricating oil pressure, which negatively affects its performance. The inevitable result of such a condition is the complete failure of the main journal bearing of marine slow speed diesel engine. The study at hand introduces an experimental investigation aiming at better identifying the impact of oil supply pressure in relation to the pressure and temperature distribution within circumferential grooved bearing. Test trials have involved tracing those two critical profiles in case of optimal supply pressure as well as when it is either decreased or increased by 25%. The experimental procedures have also extended to cover the influence of two different oil grades on the outcomes derived for the previously mentioned operational conditions. All of the conducted experimental test trials were carried out with observation to the loading program of marine slow speed diesel engine involving different speeds and loads. It was concluded that maximum oil film pressure is seriously affected when oil supply pressure is decreased especially under high loads. In regard to the oil film temperature profile, it was observed that it is slightly affected under such operational conditions in which speeds are slow and range from 32 rpm up to 102 rpm.
- 10 April 2023
- Published by Egyptian Knowledge Bank in Port-Said Engineering Research Journal
Experimental Evaluation of the Effect of Oil Supply Pressure related to Marine Slow Speed Diesel Engine on Oil Film Pressure and Temperature Profiles within Journal Bearing
Marine journal bearing is so often subject to the risk resulting from the loss of lubricating oil pressure, which negatively affects its performance. The inevitable result of such a condition is the complete failure of the main journal bearing of marine slow speed diesel engine. The study at hand introduces an experimental investigation aiming at better identifying the impact of oil supply pressure in relation to the pressure and temperature distribution within circumferential grooved bearing. Test trials have involved tracing those two critical profiles in case of optimal supply pressure as well as when it is either decreased or increased by 25%. The experimental procedures have also extended to cover the influence of two different oil grades on the outcomes derived for the previously mentioned operational conditions. All of the conducted experimental test trials were carried out with observation to the loading program of marine slow speed diesel engine involving different speeds and loads. It was concluded that maximum oil film pressure is seriously affected when oil supply pressure is decreased especially under high loads. In regard to the oil film temperature profile, it was observed that it is slightly affected under such operational conditions in which speeds are slow and range from 32 rpm up to 102 rpm.
- Open Access
- 30 August 2022
- Published by Arab Academy for Science, Technology, and Maritime Transport (AASTMT) in International Maritime Transport and Logistic Journal
- Vol. 11, 39-51
Universal journal bearing test rig uncertainty and validation measurement to enhance marine shafting performance
Universal journal bearing test rig uncertainty and validation measurement to enhance marine shafting performance
- 30 August 2022
- Published by Arab Academy for Science, Technology, and Maritime Transport (AASTMT) in International Maritime Transport and Logistic Journal
- Vol. 11, 39-51
Open AccessUniversal journal bearing test rig uncertainty and validation measurement to enhance marine shafting performance
Universal journal bearing test rig uncertainty and validation measurement to enhance marine shafting performance
- 28 October 2021
- Published by Egyptian Knowledge Bank in Port-Said Engineering Research Journal
Development of A Universal Journal Bearing Test Rig (UJBTR) and Experimental Setup for Oil Film Lubrication Enhancement Regarding Marine Applications.
In fact, attaining the final most beneficial target of improving the oil film lubrication for marine purposes can be said to have passed through several main stages up till now. The first stage has involved the initial design and construction of the journal bearing test rig marked by sufficient validity for embracing the potential experimental studies. Those studies were concerned with the lubricating oil within the journal bearing [1]. Notwithstanding, the need has then arisen for the second stage which involved carrying out a comprehensive modification and conversion in regard to the journal bearing test rig, aiming at enlarging its capacity and range to endure more sophisticated experiments. The modification has involved adding a hydraulic loading system as well as full monitoring process via SCADA system, for the sake of facilitating conducting all potential experiments relating the critical operating factors that might otherwise affect the journal bearing performance. This paper is representing the second step in the long uninterrupted series of efforts seeking to outline the results of a proposed research program for marine applications under the title of “Theoretical and Experimental Analysis of the Performance of Journal Bearing”. The program will deal with different design and construction aspects of journal bearing, with special reference to marine applications.
- 28 October 2021
- Published by Egyptian Knowledge Bank in Port-Said Engineering Research Journal
Development of A Universal Journal Bearing Test Rig (UJBTR) and Experimental Setup for Oil Film Lubrication Enhancement Regarding Marine Applications.
In fact, attaining the final most beneficial target of improving the oil film lubrication for marine purposes can be said to have passed through several main stages up till now. The first stage has involved the initial design and construction of the journal bearing test rig marked by sufficient validity for embracing the potential experimental studies. Those studies were concerned with the lubricating oil within the journal bearing [1]. Notwithstanding, the need has then arisen for the second stage which involved carrying out a comprehensive modification and conversion in regard to the journal bearing test rig, aiming at enlarging its capacity and range to endure more sophisticated experiments. The modification has involved adding a hydraulic loading system as well as full monitoring process via SCADA system, for the sake of facilitating conducting all potential experiments relating the critical operating factors that might otherwise affect the journal bearing performance. This paper is representing the second step in the long uninterrupted series of efforts seeking to outline the results of a proposed research program for marine applications under the title of “Theoretical and Experimental Analysis of the Performance of Journal Bearing”. The program will deal with different design and construction aspects of journal bearing, with special reference to marine applications.