Nan Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nan Li has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Hang Yang
College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China
10 shared publications - Hongqi Zhang
College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China
10 shared publications - Xianbin Yu
Zhejiang University
10 shared publications - Zuomin Yang
College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China
10 shared publications - Lu Zhang
Zhejiang University
9 shared publications - Zhidong Lyu
College of Information Science and Electronic Engineering, Zhejiang University, Hangzhou, China
8 shared publications
Latest Publications
- 26 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (9) , 4322-4330
Metasurface-Based Dual-Mode Bright-Field and Spiral Phase Contrast THz Imaging With Enhanced Focal Depth
Bright-field imaging and spiral phase contrast imaging are the two foremost imaging modes in microscopy, that provide entire and edge-enhanced information about target objects, respectively. However, conventional microscopes usually suffer from limited depth-of-focus, making them support high-resolution imaging only at a fixed distance. In order to solve the problem, we present a versatile imaging system that allows for simultaneous bright-field imaging and edge-enhanced imaging within the long focal depth range at 0.1 THz. The system is based on a 3D printed dielectric metasurface of which a phase profile is a sum of the $l=+1$ spiral phase, axicon phase, and deflection phase. Owing to powerful ability in manipulating electromagnetic waves of the multifunctional metasurface, the metasurface-based imaging system is compact, without resorting to the complex and bulky $4f$ Fourier filtering system. Experimental results show that the system can present both bright-field image and edge-enhanced image of the object in the same field of view, with a resolution of up to 4 mm. In addition, the system is capable of dual-mode imaging over an extended depth-of-focus range. Capitalizing on compactness and high-resolution characteristics, it is believed that the scheme may shed new light on optical imaging and information processing, and open new doors to machine vision and microscopy.
- 26 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (9) , 4322-4330
Metasurface-Based Dual-Mode Bright-Field and Spiral Phase Contrast THz Imaging With Enhanced Focal Depth
Bright-field imaging and spiral phase contrast imaging are the two foremost imaging modes in microscopy, that provide entire and edge-enhanced information about target objects, respectively. However, conventional microscopes usually suffer from limited depth-of-focus, making them support high-resolution imaging only at a fixed distance. In order to solve the problem, we present a versatile imaging system that allows for simultaneous bright-field imaging and edge-enhanced imaging within the long focal depth range at 0.1 THz. The system is based on a 3D printed dielectric metasurface of which a phase profile is a sum of the $l=+1$ spiral phase, axicon phase, and deflection phase. Owing to powerful ability in manipulating electromagnetic waves of the multifunctional metasurface, the metasurface-based imaging system is compact, without resorting to the complex and bulky $4f$ Fourier filtering system. Experimental results show that the system can present both bright-field image and edge-enhanced image of the object in the same field of view, with a resolution of up to 4 mm. In addition, the system is capable of dual-mode imaging over an extended depth-of-focus range. Capitalizing on compactness and high-resolution characteristics, it is believed that the scheme may shed new light on optical imaging and information processing, and open new doors to machine vision and microscopy.
- 3 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (3) , 1289-1298
Metasurface-Based Enhanced Orbital Angular Momentum Index Modulation for High Spectral Efficiency and Energy Efficiency
With the advantages of providing numerous multiplexing channels and transmitting index symbols without energy consumption, orbital angular momentum (OAM) technology and the index modulation (IM) scheme have become increasingly prominent in improving spectral efficiency (SE) and energy efficiency (EE). In this paper, an enhanced OAM-IM communication system based on the metasurface is proposed for improving both SE and EE. As the generator and demultiplexer for multiplexing OAM beams, the metasurface can not only improve the system bandwidth and reduce system complexity, but also avoid the mode degeneracy problem in traditional OAM-IM systems, thereby significantly increasing the number of available modes. Moreover, the improvement in index rules enabled the increase in the index symbol information and multiplexing channels, further exploiting the potential of the OAM-IM scheme to improve SE. The countermeasures adapted to different modulation formats have been discussed, while the advantages of the enhanced OAM-IM scheme in improving capacity and EE have been verified by simulations. At last, with the joint support of the metasurface and photonics-aided THz communication links, the feasibility and generality of the enhanced OAM-IM schemes have been demonstrated through high-speed communication experiments.
- 3 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (3) , 1289-1298
Metasurface-Based Enhanced Orbital Angular Momentum Index Modulation for High Spectral Efficiency and Energy Efficiency
With the advantages of providing numerous multiplexing channels and transmitting index symbols without energy consumption, orbital angular momentum (OAM) technology and the index modulation (IM) scheme have become increasingly prominent in improving spectral efficiency (SE) and energy efficiency (EE). In this paper, an enhanced OAM-IM communication system based on the metasurface is proposed for improving both SE and EE. As the generator and demultiplexer for multiplexing OAM beams, the metasurface can not only improve the system bandwidth and reduce system complexity, but also avoid the mode degeneracy problem in traditional OAM-IM systems, thereby significantly increasing the number of available modes. Moreover, the improvement in index rules enabled the increase in the index symbol information and multiplexing channels, further exploiting the potential of the OAM-IM scheme to improve SE. The countermeasures adapted to different modulation formats have been discussed, while the advantages of the enhanced OAM-IM scheme in improving capacity and EE have been verified by simulations. At last, with the joint support of the metasurface and photonics-aided THz communication links, the feasibility and generality of the enhanced OAM-IM schemes have been demonstrated through high-speed communication experiments.
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (11) , 6669-6677
Simultaneous Monitoring of Multichannel Terahertz Communication Signals Based on a Photoconductive Sampling
Wavelength division multiplexing (WDM) technology has been ubiquitously employed in terahertz (THz) communication systems to boost the transmission capacity. However, exploring large bandwidth in WDM-based THz systems pose challenges for the currently existing signal monitoring techniques using either electronic mixers or opto-electronic devices. In this article, a THz sequential equivalent-time sampling (SETS) system using a photoconductive antenna (PCA) for simultaneously capturing multichannel THz communication signals is proposed. A broadband PCA, illuminated by the ultrashort optical pulses from a mode-locked laser (MLL), enables the optical sampling of THz signals. Based on the SETS technique, multichannel THz signals can be equivalently sampled into the low-frequency domain. In a proof-of-concept experiment, three-channel THz quadrature-phase shift-keying (QPSK) signals ( $\sim$ 62 GHz bandwidth) at 100–170 GHz are simultaneously sampled, monitored, and evaluated with a $\sim$ 100 MHz sampling rate, and small waveform distortion (DT) of 2.47%, 2.66%, and 3.1% for in-phase components, and 2.5%, 2.74%, and 3.83% for quadrature components have been achieved for three-channel. The proposed THz SETS system brings a new opportunity for exploring more THz bandwidth for wireless communications, and provides a simple, convenient method for simultaneously monitoring multichannel THz signals with beyond 40 GHz bandwidth.
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (11) , 6669-6677
Simultaneous Monitoring of Multichannel Terahertz Communication Signals Based on a Photoconductive Sampling
Wavelength division multiplexing (WDM) technology has been ubiquitously employed in terahertz (THz) communication systems to boost the transmission capacity. However, exploring large bandwidth in WDM-based THz systems pose challenges for the currently existing signal monitoring techniques using either electronic mixers or opto-electronic devices. In this article, a THz sequential equivalent-time sampling (SETS) system using a photoconductive antenna (PCA) for simultaneously capturing multichannel THz communication signals is proposed. A broadband PCA, illuminated by the ultrashort optical pulses from a mode-locked laser (MLL), enables the optical sampling of THz signals. Based on the SETS technique, multichannel THz signals can be equivalently sampled into the low-frequency domain. In a proof-of-concept experiment, three-channel THz quadrature-phase shift-keying (QPSK) signals ( $\sim$ 62 GHz bandwidth) at 100–170 GHz are simultaneously sampled, monitored, and evaluated with a $\sim$ 100 MHz sampling rate, and small waveform distortion (DT) of 2.47%, 2.66%, and 3.1% for in-phase components, and 2.5%, 2.74%, and 3.83% for quadrature components have been achieved for three-channel. The proposed THz SETS system brings a new opportunity for exploring more THz bandwidth for wireless communications, and provides a simple, convenient method for simultaneously monitoring multichannel THz signals with beyond 40 GHz bandwidth.
- 22 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (11) , 3981-3988
Multi-Channel Photonic THz-ISAC System Based on Integrated LFM-QAM Waveform
The integrated sensing and communication (ISAC) has been envisioned as a promising technology to simultaneously perform high-capacity communication and high-accuracy sensing with efficient resource utilization. Nevertheless, due to the severe mutual constraints between communication and sensing functions, the performance of previously reported ISAC demonstrations notably trails that of individual communication or sensing systems. In this work, an integrated LFM-QAM waveform is proposed and theoretically analyzed by combining linear frequency modulation (LFM) and quadrature amplitude modulation (QAM) formats. Employing the proposed waveform and optical wavelength division multiplexing (WDM) technique, we experimentally implement a multi-channel photonic terahertz (THz)-ISAC wireless system operating at 275 GHz band, simultaneously achieving a communication data rate up to 120 Gbps and a range resolution as high as 2.5 mm. To the best of our knowledge, this is the first time to demonstrate beyond 100 Gbps wireless data rate and mm-scale resolution based on an integrated waveform in the THz region, revealing the potential of THz-ISAC performance.
- 22 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (11) , 3981-3988
Multi-Channel Photonic THz-ISAC System Based on Integrated LFM-QAM Waveform
The integrated sensing and communication (ISAC) has been envisioned as a promising technology to simultaneously perform high-capacity communication and high-accuracy sensing with efficient resource utilization. Nevertheless, due to the severe mutual constraints between communication and sensing functions, the performance of previously reported ISAC demonstrations notably trails that of individual communication or sensing systems. In this work, an integrated LFM-QAM waveform is proposed and theoretically analyzed by combining linear frequency modulation (LFM) and quadrature amplitude modulation (QAM) formats. Employing the proposed waveform and optical wavelength division multiplexing (WDM) technique, we experimentally implement a multi-channel photonic terahertz (THz)-ISAC wireless system operating at 275 GHz band, simultaneously achieving a communication data rate up to 120 Gbps and a range resolution as high as 2.5 mm. To the best of our knowledge, this is the first time to demonstrate beyond 100 Gbps wireless data rate and mm-scale resolution based on an integrated waveform in the THz region, revealing the potential of THz-ISAC performance.
- 4 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (15) , 5080-5087
Metasurface-Based High-Speed Photonic THz OAM Communication System
The terahertz (THz) and orbital angular momentum (OAM) technologies have become increasingly prominent since they can provide broad bandwidth and large amounts of multiplexing channels. In this paper, a high-speed communication system is proposed and demonstrated by employing photonics-aided THz signal generation and metasurface-based OAM multiplexing techniques. To take advantage of the large bandwidth in the THz band and reduce the complexity of the multiplexing device, the wideband unit operating at 100 GHz and the multiplexed metasurface are designed. After the performance is verified by both simulations and experiments, the generated OAM beams are used as multiplexing channels to transmit the communication signals with 16-ary quadrature amplitude modulation (16-QAM) modulation format, and a data rate of up to 48 Gbit/s is achieved. This work indicates that the metasurface can seamlessly bridge the OAM multiplexing and photonics-aided THz system, and is expected to pave the way towards the evolution of next-generation large-capacity wireless communication.
- 4 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (15) , 5080-5087
Metasurface-Based High-Speed Photonic THz OAM Communication System
The terahertz (THz) and orbital angular momentum (OAM) technologies have become increasingly prominent since they can provide broad bandwidth and large amounts of multiplexing channels. In this paper, a high-speed communication system is proposed and demonstrated by employing photonics-aided THz signal generation and metasurface-based OAM multiplexing techniques. To take advantage of the large bandwidth in the THz band and reduce the complexity of the multiplexing device, the wideband unit operating at 100 GHz and the multiplexed metasurface are designed. After the performance is verified by both simulations and experiments, the generated OAM beams are used as multiplexing channels to transmit the communication signals with 16-ary quadrature amplitude modulation (16-QAM) modulation format, and a data rate of up to 48 Gbit/s is achieved. This work indicates that the metasurface can seamlessly bridge the OAM multiplexing and photonics-aided THz system, and is expected to pave the way towards the evolution of next-generation large-capacity wireless communication.
- 12 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (3) , 2161-2170
A Broadband Transmissive Metasurface for Non-Diffractive THz OAM Multiplexing and Communication
Terahertz (THz) orbital angular momentum (OAM) beams have tremendous potential for tackling the capacity crunch in high-speed wireless communication. However, conventional OAM beams suffer from the limitations of beam divergence and stringent alignment requirements in practical wireless communications. In order to cope with the challenge, we propose a broadband Huygens’ transmissive metasurface for the manipulation of non-diffractive OAM beams operating at 0.1 THz, which has the advantages of low profile, simplicity, and ease of fabrication. By virtue of its flexible phase control capability, the metasurface employing a combination of hyperbolic phase, OAM phase, and axicon phase is proposed to multiplex two high-order Bessel beams. Both simulation and measurement results indicate that it generates non-diffractive OAM beams with high purity over a broad bandwidth of 20 GHz. Based on the metasurface, a 112 Gbit/s photonic THz wireless communication link using two non-diffractive OAM beams, with each channel carrying a 14 Gbaud 16-quadrature amplitude modulation (QAM) signal is experimentally demonstrated for the first time. The communication performance of high-order Bessel beams is compared with the conventional OAM beams, and it is found that these high-order Bessel beams are more preferable to increase the signal-to-noise ratio owing to the more stable field distribution. This work provides an effective way to alleviate the diffractive divergence of the OAM waves and extend the achievable link distance in wireless THz OAM communication systems, opening new opportunities for high data rate wireless communications.
- 12 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (3) , 2161-2170
A Broadband Transmissive Metasurface for Non-Diffractive THz OAM Multiplexing and Communication
Terahertz (THz) orbital angular momentum (OAM) beams have tremendous potential for tackling the capacity crunch in high-speed wireless communication. However, conventional OAM beams suffer from the limitations of beam divergence and stringent alignment requirements in practical wireless communications. In order to cope with the challenge, we propose a broadband Huygens’ transmissive metasurface for the manipulation of non-diffractive OAM beams operating at 0.1 THz, which has the advantages of low profile, simplicity, and ease of fabrication. By virtue of its flexible phase control capability, the metasurface employing a combination of hyperbolic phase, OAM phase, and axicon phase is proposed to multiplex two high-order Bessel beams. Both simulation and measurement results indicate that it generates non-diffractive OAM beams with high purity over a broad bandwidth of 20 GHz. Based on the metasurface, a 112 Gbit/s photonic THz wireless communication link using two non-diffractive OAM beams, with each channel carrying a 14 Gbaud 16-quadrature amplitude modulation (QAM) signal is experimentally demonstrated for the first time. The communication performance of high-order Bessel beams is compared with the conventional OAM beams, and it is found that these high-order Bessel beams are more preferable to increase the signal-to-noise ratio owing to the more stable field distribution. This work provides an effective way to alleviate the diffractive divergence of the OAM waves and extend the achievable link distance in wireless THz OAM communication systems, opening new opportunities for high data rate wireless communications.
- 22 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (3) , 1124-1128
A Reflective Metasurface for OAM and Polarization Multiplexing Communication in the W-Band
In this letter, a reflective metasurface for OAM and polarization multiplexing communication is proposed in the W-band. To realize orbital angular momentum (OAM) and polarization multiplexing communication, not only the design principle of the metasurface is studied, but also the reflective unit capable of being modulated in two polarizations and working in broad bandwidth is designed. Experimental results show that it can generate the multiplexed OAM beams in two polarizations with high mode purities. After measuring the great isolation performance provided by different OAM modes and polarizations, the four generated beams are employed as multiplexing channels to transmit the communication signals with quadrature phase shift keying (QPSK) format, and the data rate reaches 64 Gbit/s at last. With the assistance of metasurface, OAM multiplexing technology has shown great potential in large-capacity wireless communication.
- 22 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (3) , 1124-1128
A Reflective Metasurface for OAM and Polarization Multiplexing Communication in the W-Band
In this letter, a reflective metasurface for OAM and polarization multiplexing communication is proposed in the W-band. To realize orbital angular momentum (OAM) and polarization multiplexing communication, not only the design principle of the metasurface is studied, but also the reflective unit capable of being modulated in two polarizations and working in broad bandwidth is designed. Experimental results show that it can generate the multiplexed OAM beams in two polarizations with high mode purities. After measuring the great isolation performance provided by different OAM modes and polarizations, the four generated beams are employed as multiplexing channels to transmit the communication signals with quadrature phase shift keying (QPSK) format, and the data rate reaches 64 Gbit/s at last. With the assistance of metasurface, OAM multiplexing technology has shown great potential in large-capacity wireless communication.
- 10 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (2) , 1302-1311
A Broadband Dual-Polarized Reflective Metasurface for THz OAM Communication
Terahertz (THz) beams with abundant spectrum resources and low beam divergence can be combined with orbital angular momentum (OAM) beams characterized by orthogonal propagation to multifold the capacity of wireless communication systems. However, in order to support the explosive growth of massive communication data traffic, THz OAM must be further enhanced with other multiplexing technologies. Therefore, it is imperative to develop new multifunctional devices. In this article, we propose a novel broadband dual-polarized reflective metasurface, which can generate two coaxially propagating OAM beams with distinct modes for each polarization. Because of the geometric symmetry, the metasurface shows the same electromagnetic response with respect to both x -and y -polarized waves, thus possessing the dual-polarized property. Simulated and measured results verify that the metasurface can realize the incorporation of OAM multiplexing and polarization multiplexing in a broad frequency range of 90–110 GHz. The crosstalks from other OAM modes and polarizations are lower than $-$ 16 dB and $-$ 21 dB, respectively. Based on the metasurface, a THz wireless communication system was demonstrated by multiplexing four independent OAM beams with each channel carrying a 6-Gbaud quaternary phase shift keying (QPSK) signal, so that an aggregate 48 Gbit/s data transmission with bit error rate (BER) below 3.8e-3 was achieved. This work verifies the feasibility of metasurface for multidimensional multiplexing in the THz region, meaning the metasurface may serve as a promising candidate for ultrahigh speed THz communication systems.
- 10 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (2) , 1302-1311
A Broadband Dual-Polarized Reflective Metasurface for THz OAM Communication
Terahertz (THz) beams with abundant spectrum resources and low beam divergence can be combined with orbital angular momentum (OAM) beams characterized by orthogonal propagation to multifold the capacity of wireless communication systems. However, in order to support the explosive growth of massive communication data traffic, THz OAM must be further enhanced with other multiplexing technologies. Therefore, it is imperative to develop new multifunctional devices. In this article, we propose a novel broadband dual-polarized reflective metasurface, which can generate two coaxially propagating OAM beams with distinct modes for each polarization. Because of the geometric symmetry, the metasurface shows the same electromagnetic response with respect to both x -and y -polarized waves, thus possessing the dual-polarized property. Simulated and measured results verify that the metasurface can realize the incorporation of OAM multiplexing and polarization multiplexing in a broad frequency range of 90–110 GHz. The crosstalks from other OAM modes and polarizations are lower than $-$ 16 dB and $-$ 21 dB, respectively. Based on the metasurface, a THz wireless communication system was demonstrated by multiplexing four independent OAM beams with each channel carrying a 6-Gbaud quaternary phase shift keying (QPSK) signal, so that an aggregate 48 Gbit/s data transmission with bit error rate (BER) below 3.8e-3 was achieved. This work verifies the feasibility of metasurface for multidimensional multiplexing in the THz region, meaning the metasurface may serve as a promising candidate for ultrahigh speed THz communication systems.
- Top Cited Papers
- 28 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (11) , 5019-5027
Radar-Centric Photonic Terahertz Integrated Sensing and Communication System Based on LFM-PSK Waveform
The radar-centric terahertz integrated sensing and communication (THz-ISAC) is identified as a significant application in future wireless access networks. Up to date, previously reported demonstrations regarding radar sensing performance lack sufficient support in a complex environment with a strong target masking effect. This work tacks this problem by proposing a radar-centric waveform combining linear frequency modulation (LFM) waveform and phase shift keying (PSK). We first derive sensing metrics of the LFM-PSK waveform through theoretical analysis, including range resolution, peak sidelobe ratio (PSLR), and Cramér-Rao lower bound (CRLB). Then a proof-of-concept experiment on a photonics-assisted integrated sensing and communication (ISAC) system operating at 330 with 18 GHz bandwidth is conducted to verify the performance of the proposed LFM-PSK waveform. In the experiment, the proposed waveform can reach a PSLR of up to 20.9 dB and a range resolution of 1.3 cm, simultaneously accommodating a data transmission of 6 Gbit/s. In addition, the effect of embedding symbols on sensing metrics is also discussed, and by comparing the range solution and PSLR with various data rates, around $\sim$ 6 dB gain in the PSLR without any deterioration of range resolution is observed.
- 28 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (11) , 5019-5027
Top Cited PapersRadar-Centric Photonic Terahertz Integrated Sensing and Communication System Based on LFM-PSK Waveform
The radar-centric terahertz integrated sensing and communication (THz-ISAC) is identified as a significant application in future wireless access networks. Up to date, previously reported demonstrations regarding radar sensing performance lack sufficient support in a complex environment with a strong target masking effect. This work tacks this problem by proposing a radar-centric waveform combining linear frequency modulation (LFM) waveform and phase shift keying (PSK). We first derive sensing metrics of the LFM-PSK waveform through theoretical analysis, including range resolution, peak sidelobe ratio (PSLR), and Cramér-Rao lower bound (CRLB). Then a proof-of-concept experiment on a photonics-assisted integrated sensing and communication (ISAC) system operating at 330 with 18 GHz bandwidth is conducted to verify the performance of the proposed LFM-PSK waveform. In the experiment, the proposed waveform can reach a PSLR of up to 20.9 dB and a range resolution of 1.3 cm, simultaneously accommodating a data transmission of 6 Gbit/s. In addition, the effect of embedding symbols on sensing metrics is also discussed, and by comparing the range solution and PSLR with various data rates, around $\sim$ 6 dB gain in the PSLR without any deterioration of range resolution is observed.
- Top Cited Papers
- 17 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (5) , 4194-4203
A THz-OAM Wireless Communication System Based on Transmissive Metasurface
With the development of various emerging technologies, the capacity of current wireless communication system is gradually saturated, and terahertz (THz) and orbital angular momentum (OAM) have hereby attracted much attention as two key technologies to increase the communication capacity. In this paper, a THz-OAM wireless communication system operating at 100 GHz based on a transmissive metasurface is proposed for the first time to the best of our knowledge. The operation principle of multiplexing metasurface which allows simultaneous generation of two coaxial OAM beams at different modes of l = 1 & –1 is studied. To meet the requirements of wireless communication and OAM multiplexing, a C-shaped transmissive unit is designed with characteristics of broad bandwidth, low transmission loss and insensitive to the change of incident angle. Experimental measurements show that the generated two OAM beams feature high mode purity, providing the excellent orthogonality of modes. The generated two OAM modes are also employed as two OAM channels to transmit two independent communication signals with on-off keying (OOK) modulation, and a data rate of 10 Gbit/s is achieved at a transmission distance of 300 mm (100 λ of 100 GHz) with bit error rates (BERs) below 3.8 × 10 -3 . This work verifies the feasibility of the multiplexing metasurface supporting wireless communication, and makes THz-OAM wireless communication systems potential for future large capacity wireless services.
- 17 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 71 (5) , 4194-4203
Top Cited PapersA THz-OAM Wireless Communication System Based on Transmissive Metasurface
With the development of various emerging technologies, the capacity of current wireless communication system is gradually saturated, and terahertz (THz) and orbital angular momentum (OAM) have hereby attracted much attention as two key technologies to increase the communication capacity. In this paper, a THz-OAM wireless communication system operating at 100 GHz based on a transmissive metasurface is proposed for the first time to the best of our knowledge. The operation principle of multiplexing metasurface which allows simultaneous generation of two coaxial OAM beams at different modes of l = 1 & –1 is studied. To meet the requirements of wireless communication and OAM multiplexing, a C-shaped transmissive unit is designed with characteristics of broad bandwidth, low transmission loss and insensitive to the change of incident angle. Experimental measurements show that the generated two OAM beams feature high mode purity, providing the excellent orthogonality of modes. The generated two OAM modes are also employed as two OAM channels to transmit two independent communication signals with on-off keying (OOK) modulation, and a data rate of 10 Gbit/s is achieved at a transmission distance of 300 mm (100 λ of 100 GHz) with bit error rates (BERs) below 3.8 × 10 -3 . This work verifies the feasibility of the multiplexing metasurface supporting wireless communication, and makes THz-OAM wireless communication systems potential for future large capacity wireless services.