DSDominik Scheurenberg

Dominik Scheurenberg

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dominik Scheurenberg has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Data-driven modelling of the fume emission rate for gas metal arc welding

    by Dominik Scheurenberg, Samuel Mann, Benjamin Ebert, Mark P. Sanders, Mohamed Behery, Gerhard Lakemeyer, Robert H. Schmitt, Rahul Sharma, Sebastian Stemmler

    Gas metal arc welding (GMAW) is used across various industries due to its versatility. However, it carries significant health risks, particularly from the inhalation of fumes. While noise and radiation are also concerns, the focus on fume emission rates (FER) has been increasing in importance. Despite extensive research, the effects of various welding process variables on FER are not yet fully understood. Traditional methods for measuring these emissions are time-intensive and expensive, especially when considering the plethora of available materials and welding techniques. To address this topic, several FER models are being discussed in this paper, based on transient electrical and optical process data. For this task, an extensive database of FER measurements has been acquired with the respective electrical and optical time series, with 240 welds for model training and an additional 28 welds for validation. This database has been used to train different machine learning (ML) algorithms with varying transparency regarding the correlation between the transient process data and the FER. The investigation revealed that basic statistical modeling, using multiple linear regression, can achieve an average FER prediction accuracy of $${\pm 25}{\%}$$ ± 25 % across the FER operating range, measured by the average deviation of the predicted FER value from the measured value over the entire test data set. This applies to a broad range of wire feed rates, from $${5}{\text {m} \, \text {min}^{-1}}$$ 5 m min - 1 up to $${12}{\text {m} \, \text {min}^{-1}}$$ 12 m min - 1 . Deep learning algorithms can improve the average FER prediction accuracy even further, reaching up to $${\pm 12}{\%}$$ ± 12 % using neural networks. However, they may lack the correlation insights provided by other ML approaches. A correlation analysis of the data revealed that further investigations of different filler materials, etc., can be reduced to a few significant FER measurements. The implications of these findings are far-reaching. By incorporating these predictive models into modern welding equipment, we can create virtual FER sensors or observers on-site. This not only improves process efficiency but also reduces welders’ exposure to harmful fumes while enabling a more comprehensive analysis of FER within the broader manufacturing context.

  • Open Access

    Early Stopping Bayesian Optimization for Controller Tuning

    by David Stenger, Dominik Scheurenberg, Heike Vallery, Sebastian Trimpe

    Manual tuning of performance-critical controller parameters can be tedious and sub-optimal. Bayesian Optimization (BO) is an increasingly popular practical alternative to automatically optimize controller parameters from few experiments. Standard BO practice is to evaluate the closed-loop performance of parameters proposed during optimization on an episode with a fixed length. However, fixed-length episodes can be wasteful. For example, continuing an episode where already the start shows undesirable behavior such as strong oscillations seems pointless. Therefore, we propose a BO method that stops an episode early if suboptimality becomes apparent before an episode is completed. Such early stopping results in partial observations of the controller's performance, which cannot directly be included in standard BO. We propose three heuristics to facilitate partially observed episodes in BO. Through five numerical and one hardware experiment, we demonstrate that early stopping BO can substantially reduce the time needed for optimization.

  • Open Access

    Local Bayesian optimization for controller tuning with crash constraints

    by Alexander von Rohr, David Stenger, Dominik Scheurenberg, Sebastian Trimpe

    Controller tuning is crucial for closed-loop performance but often involves manual adjustments. Although Bayesian optimization (BO) has been established as a data-efficient method for automated tuning, applying it to large and high-dimensional search spaces remains challenging. We extend a recently proposed local variant of BO to include crash constraints, where the controller can only be successfully evaluated in an a-priori unknown feasible region. We demonstrate the efficiency of the proposed method through simulations and hardware experiments. Our findings showcase the potential of local BO to enhance controller performance and reduce the time and resources necessary for tuning.


  • Open Access

    Model-Based Controlling Approaches for Manufacturing Processes

    by Adrian Karl Rüppel, Muzaffer Ay, Benedikt Biernat, Ike Kunze, Markus Landwehr, Samuel Mann, Jan Pennekamp, Pascal Rabe, Mark P. Sanders, Dominik Scheurenberg, et al.

    The main objectives in production technology are quality assurance, cost reduction, and guaranteed process safety and stability. Digital shadows enable a more comprehensive understanding and monitoring of processes on shop floor level. Thus, process information becomes available between decision levels, and the aforementioned criteria regarding quality, cost, or safety can be included in control decisions for production processes. The contextual data for digital shadows typically arises from heterogeneous sources. At shop floor level, the proximity to the process requires usage of available data as well as domain knowledge. Data sources need to be selected, synchronized, and processed. Especially high-frequency data requires algorithms for intelligent distribution and efficient filtering of the main information using real-time devices and in-network computing. Real-time data is enriched by simulations, metadata from product planning, and information across the whole process chain. Well-established analytical and empirical models serve as the base for new hybrid, gray box approaches. These models are then applied to optimize production process control by maximizing the productivity under given quality and safety constraints. To store and reuse the developed models, ontologies are developed and a data lake infrastructure is utilized and constantly enlarged laying the basis for a World Wide Lab (WWL). Finally, closing the control loop requires efficient quality assessment, immediately after the process and directly on the machine. This chapter addresses works in a connected job shop to acquire data, identify and optimize models, and automate systems and their deployment in the Internet of Production (IoP).


  • Open Access

    Model-Based Controlling Approaches for Manufacturing Processes

    by Adrian Karl Rüppel, Muzaffer Ay, Benedikt Biernat, Ike Kunze, Markus Landwehr, Samuel Mann, Jan Pennekamp, Pascal Rabe, Mark P. Sanders, Dominik Scheurenberg, et al.

    The main objectives in production technology are quality assurance, cost reduction, and guaranteed process safety and stability. Digital shadows enable a more comprehensive understanding and monitoring of processes on shop floor level. Thus, process information becomes available between decision levels, and the aforementioned criteria regarding quality, cost, or safety can be included in control decisions for production processes. The contextual data for digital shadows typically arises from heterogeneous sources. At shop floor level, the proximity to the process requires usage of available data as well as domain knowledge. Data sources need to be selected, synchronized, and processed. Especially high-frequency data requires algorithms for intelligent distribution and efficient filtering of the main information using real-time devices and in-network computing. Real-time data is enriched by simulations, metadata from product planning, and information across the whole process chain. Well-established analytical and empirical models serve as the base for new hybrid, gray box approaches. These models are then applied to optimize production process control by maximizing the productivity under given quality and safety constraints. To store and reuse the developed models, ontologies are developed and a data lake infrastructure is utilized and constantly enlarged laying the basis for a World Wide Lab (WWL). Finally, closing the control loop requires efficient quality assessment, immediately after the process and directly on the machine. This chapter addresses works in a connected job shop to acquire data, identify and optimize models, and automate systems and their deployment in the Internet of Production (IoP).


  • Open Access

    Model-Based Controlling Approaches for Manufacturing Processes

    by Adrian Karl Rüppel, Muzaffer Ay, Benedikt Biernat, Ike Kunze, Markus Landwehr, Samuel Mann, Jan Pennekamp, Pascal Rabe, Mark P. Sanders, Dominik Scheurenberg, et al.

    The main objectives in production technology are quality assurance, cost reduction, and guaranteed process safety and stability. Digital shadows enable a more comprehensive understanding and monitoring of processes on shop floor level. Thus, process information becomes available between decision levels, and the aforementioned criteria regarding quality, cost, or safety can be included in control decisions for production processes. The contextual data for digital shadows typically arises from heterogeneous sources. At shop floor level, the proximity to the process requires usage of available data as well as domain knowledge. Data sources need to be selected, synchronized, and processed. Especially high-frequency data requires algorithms for intelligent distribution and efficient filtering of the main information using real-time devices and in-network computing. Real-time data is enriched by simulations, metadata from product planning, and information across the whole process chain. Well-established analytical and empirical models serve as the base for new hybrid, gray box approaches. These models are then applied to optimize production process control by maximizing the productivity under given quality and safety constraints. To store and reuse the developed models, ontologies are developed and a data lake infrastructure is utilized and constantly enlarged laying the basis for a World Wide Lab (WWL). Finally, closing the control loop requires efficient quality assessment, immediately after the process and directly on the machine. This chapter addresses works in a connected job shop to acquire data, identify and optimize models, and automate systems and their deployment in the Internet of Production (IoP).