Wenbo Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wenbo Wang has a total of 154 co-authors. Here are the top co-authors by number of shared publications:
- Aiqin Wang
Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences
11 shared publications - Fang Guo
Inner Mongolia Key Laboratory of Rare Earth Catalysis, College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot, 010021, PR China
9 shared publications Hang Lu
Inner Mongolia University
7 shared publicationsHuan Zhang
Inner Mongolia University
7 shared publicationsXiangyu Liu
Inner Mongolia Key Laboratory of Rare Earth Catalysis, College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot, 010021, PR China
7 shared publicationsYue Yin
Inner Mongolia Key Laboratory of Rare Earth Catalysis, College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot, 010021, PR China
7 shared publications
Latest Publications
- 25 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (35) , 10302-10308
Theoretical Insights into 4f–3d Synergistic Catalysis in Fe–Light Rare-Earth Atomic-Scale Catalysts for Oxygen Reduction
Sluggish oxygen reduction reaction (ORR) kinetics limit energy conversion efficiency, driving research interest in atomic-level catalysts. This work employs density functional theory calculations to investigate the ORR activity of Fe-based light rare-earth catalysts. Six Fe–light rare-earth configurations are constructed to reveal how 4f orbitals modulate the electronic structure of the Fe sites. Gibbs free energy analyses reveal synergistic catalysis between Fe and light rare-earth elements, enabling catalysts to optimize the reaction pathway and lower energy barriers of intermediates compared to single-atom catalysts. Among these, Fe–Nd–NC exhibits an ORR performance with an overpotential of only 0.55 V, an improvement over Fe–N–C and Nd–N–C. Electronic state analyses identify Fe atoms as active sites and Nd atoms as modulation centers. The 4f–3d coupling yields an optimal structure, optimizing the configuration of Fe sites and tuning the adsorption strength of intermediates. This study elucidates the origin of synergistic catalysis in Fe–light rare-earth catalysts, offering theoretical guidance for the design of ORR electrocatalysts.
- 25 August 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (35) , 10302-10308
Theoretical Insights into 4f–3d Synergistic Catalysis in Fe–Light Rare-Earth Atomic-Scale Catalysts for Oxygen Reduction
Sluggish oxygen reduction reaction (ORR) kinetics limit energy conversion efficiency, driving research interest in atomic-level catalysts. This work employs density functional theory calculations to investigate the ORR activity of Fe-based light rare-earth catalysts. Six Fe–light rare-earth configurations are constructed to reveal how 4f orbitals modulate the electronic structure of the Fe sites. Gibbs free energy analyses reveal synergistic catalysis between Fe and light rare-earth elements, enabling catalysts to optimize the reaction pathway and lower energy barriers of intermediates compared to single-atom catalysts. Among these, Fe–Nd–NC exhibits an ORR performance with an overpotential of only 0.55 V, an improvement over Fe–N–C and Nd–N–C. Electronic state analyses identify Fe atoms as active sites and Nd atoms as modulation centers. The 4f–3d coupling yields an optimal structure, optimizing the configuration of Fe sites and tuning the adsorption strength of intermediates. This study elucidates the origin of synergistic catalysis in Fe–light rare-earth catalysts, offering theoretical guidance for the design of ORR electrocatalysts.
- 3 August 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (5)
Gd2O3-induced electronic modulation of Cu for efficient oxygen reduction in aluminum–air batteries
A Gd2O3-modified copper-based composite catalyst (Gd2O3–Cu/C) was developed via solvothermal preassembly and high-temperature pyrolysis to overcome the sluggish oxygen reduction reaction (ORR) kinetics of aluminum–air batteries (AABs) and the limitations of Pt-based catalysts. The strong electronic interaction between Gd2O3 and Cu active sites efficiently regulates the electronic structure of the catalyst, reducing its work function and charge transfer resistance; this results in an increase in the valence band electron density, thus promoting a nearly four-electron ORR pathway and ultimately enhancing the overall ORR kinetics. The catalyst exhibited a half-wave potential of 0.82 V, a Tafel slope of 67 mV dec−1, a 90% current retention after 500 min, and outstanding methanol tolerance, demonstrating superior ORR kinetics and durability in alkaline electrolyte. When assembled into an AAB, the Gd2O3–Cu/C catalyst delivered an open-circuit potential of 1.521 V, a peak power density of 65.7 mW cm−2, and a specific capacity of 578.8 mAh g−1, outperforming the commercial Pt/C-based counterpart. Density functional theory calculations revealed that Gd-induced electronic modulation of Cu facilitates electron transfer from Gd2O3 to Cu, positively shifting the d-band center of Cu toward the Fermi level, optimizing the adsorption of ORR species, and thus enhancing the ORR performance. This work introduces a cost-effective and high-performance non-precious metal catalyst for ORR, with application in AABs for emergency power supplies.
- 3 August 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (5)
Gd2O3-induced electronic modulation of Cu for efficient oxygen reduction in aluminum–air batteries
A Gd2O3-modified copper-based composite catalyst (Gd2O3–Cu/C) was developed via solvothermal preassembly and high-temperature pyrolysis to overcome the sluggish oxygen reduction reaction (ORR) kinetics of aluminum–air batteries (AABs) and the limitations of Pt-based catalysts. The strong electronic interaction between Gd2O3 and Cu active sites efficiently regulates the electronic structure of the catalyst, reducing its work function and charge transfer resistance; this results in an increase in the valence band electron density, thus promoting a nearly four-electron ORR pathway and ultimately enhancing the overall ORR kinetics. The catalyst exhibited a half-wave potential of 0.82 V, a Tafel slope of 67 mV dec−1, a 90% current retention after 500 min, and outstanding methanol tolerance, demonstrating superior ORR kinetics and durability in alkaline electrolyte. When assembled into an AAB, the Gd2O3–Cu/C catalyst delivered an open-circuit potential of 1.521 V, a peak power density of 65.7 mW cm−2, and a specific capacity of 578.8 mAh g−1, outperforming the commercial Pt/C-based counterpart. Density functional theory calculations revealed that Gd-induced electronic modulation of Cu facilitates electron transfer from Gd2O3 to Cu, positively shifting the d-band center of Cu toward the Fermi level, optimizing the adsorption of ORR species, and thus enhancing the ORR performance. This work introduces a cost-effective and high-performance non-precious metal catalyst for ORR, with application in AABs for emergency power supplies.
- 9 July 2026
- Published by Mineralogical Society in Clay Minerals
- p. 1-24
Attapulgite-enabled multifunctional protective coatings: structure, functionalization and applications
Multifunctional coatings represent the most widely used strategy for extending the service life of metallic materials in harsh environments. However, coating performance is determined by the designed functional fillers, or the micro/nano-containers. Attapulgite (ATP) has attracted increasing attention in multifunctional coating systems because it can simultaneously improve barrier performance, act as a micro/nano-container for active agents, form surface micro- and nanostructures and regulate interfacial properties. These features enable its broad use in superhydrophobic, anti-corrosion, anti-bacterial/anti-fouling, self-cleaning/anti-smudge and anti-icing coatings. This review provides a comprehensive overview of recent progress in ATP-based multifunctional protective coatings. It examines the main pretreatment strategies for ATP, including thermal treatment, acid/alkali activation, hydrothermal treatment and solvothermal treatment, together with their influence on channel characteristics, surface activity, dispersibility and matrix compatibility. The diverse roles of ATP in coating systems are further discussed, ranging from barrier-phase reinforcement and micro/nano-container construction to roughness generation and interfacial functional regulation, as well as the corresponding protective mechanisms. By integrating the discussion of passive barrier enhancement and active functional protection, this review offers a unified perspective on the design of ATP-based multifunctional coatings. In addition, current challenges and future research directions are briefly outlined to promote the practical development of high-performance ATP-enabled protective coatings.
- 9 July 2026
- Published by Mineralogical Society in Clay Minerals
- p. 1-24
Attapulgite-enabled multifunctional protective coatings: structure, functionalization and applications
Multifunctional coatings represent the most widely used strategy for extending the service life of metallic materials in harsh environments. However, coating performance is determined by the designed functional fillers, or the micro/nano-containers. Attapulgite (ATP) has attracted increasing attention in multifunctional coating systems because it can simultaneously improve barrier performance, act as a micro/nano-container for active agents, form surface micro- and nanostructures and regulate interfacial properties. These features enable its broad use in superhydrophobic, anti-corrosion, anti-bacterial/anti-fouling, self-cleaning/anti-smudge and anti-icing coatings. This review provides a comprehensive overview of recent progress in ATP-based multifunctional protective coatings. It examines the main pretreatment strategies for ATP, including thermal treatment, acid/alkali activation, hydrothermal treatment and solvothermal treatment, together with their influence on channel characteristics, surface activity, dispersibility and matrix compatibility. The diverse roles of ATP in coating systems are further discussed, ranging from barrier-phase reinforcement and micro/nano-container construction to roughness generation and interfacial functional regulation, as well as the corresponding protective mechanisms. By integrating the discussion of passive barrier enhancement and active functional protection, this review offers a unified perspective on the design of ATP-based multifunctional coatings. In addition, current challenges and future research directions are briefly outlined to promote the practical development of high-performance ATP-enabled protective coatings.
- 3 July 2026
- Published by Mineralogical Society in Clay Minerals
- p. 1-39
Multi-scale structural regulation of a low-grade mixed-dimensional attapulgite clay intergrowth for sites-synergistic Pb 2+ capture
Low-grade attapulgite clay intergrowths, composed mainly of attapulgite, illite, calcite and quartz, are abundant. The intimate intergrowth among these phases buries active surfaces under inert components, limiting performance and hindering value-added utilization. Herein, a multi-scale structural regulation strategy was employed. Sieving and water washing removed inert components for compositional regulation. High-speed shearing and ultrasonic treatment broke soft agglomerates and exposed active surfaces, achieving aggregation state regulation. Controlled thermal treatment removed channel water, activated exchangeable sites and enhanced negative surface charge, thereby regulating structural and surface chemistry. These steps progressively modified the material from its macroscopic composition down to its atomic-level surface properties. After the regulation, Pb 2+ adsorption capacity increased from 153.1 to 237.5 mg g –1 . The material remained effective even at pH 1 and reduced Pb 2+ from 1000 to 0.83 μg L –1 , well below the World Health Organization (WHO) guideline of 10 μg L –1 . X-ray diffraction, X-ray photoelectron spectroscopy and quantitative cation release analysis were performed to elucidate the adsorption mechanism. Ion exchange dominated by Ca-rich mineral serves as the primary pathway. Cation exchange on silicate surfaces, forming PbSiO 3 , provides a key supplementary contribution. Electrostatic attraction and in situ precipitation participate synergistically. This work establishes a theoretical foundation and offers a reagent-free, industrially feasible route for the value-added utilization of low-grade intergrown clay resources in environmental remediation.
- 3 July 2026
- Published by Mineralogical Society in Clay Minerals
- p. 1-39
Multi-scale structural regulation of a low-grade mixed-dimensional attapulgite clay intergrowth for sites-synergistic Pb 2+ capture
Low-grade attapulgite clay intergrowths, composed mainly of attapulgite, illite, calcite and quartz, are abundant. The intimate intergrowth among these phases buries active surfaces under inert components, limiting performance and hindering value-added utilization. Herein, a multi-scale structural regulation strategy was employed. Sieving and water washing removed inert components for compositional regulation. High-speed shearing and ultrasonic treatment broke soft agglomerates and exposed active surfaces, achieving aggregation state regulation. Controlled thermal treatment removed channel water, activated exchangeable sites and enhanced negative surface charge, thereby regulating structural and surface chemistry. These steps progressively modified the material from its macroscopic composition down to its atomic-level surface properties. After the regulation, Pb 2+ adsorption capacity increased from 153.1 to 237.5 mg g –1 . The material remained effective even at pH 1 and reduced Pb 2+ from 1000 to 0.83 μg L –1 , well below the World Health Organization (WHO) guideline of 10 μg L –1 . X-ray diffraction, X-ray photoelectron spectroscopy and quantitative cation release analysis were performed to elucidate the adsorption mechanism. Ion exchange dominated by Ca-rich mineral serves as the primary pathway. Cation exchange on silicate surfaces, forming PbSiO 3 , provides a key supplementary contribution. Electrostatic attraction and in situ precipitation participate synergistically. This work establishes a theoretical foundation and offers a reagent-free, industrially feasible route for the value-added utilization of low-grade intergrown clay resources in environmental remediation.
- 22 May 2026
- Published by Elsevier in Carbohydrate Polymers
- Vol. 387, 125477
Molecular engineering of cellulose-rich Caragana fiber with phytic acid construct high-energy phosphate sites for efficient rare earth capture
- 22 May 2026
- Published by Elsevier in Carbohydrate Polymers
- Vol. 387, 125477
Molecular engineering of cellulose-rich Caragana fiber with phytic acid construct high-energy phosphate sites for efficient rare earth capture
- 21 April 2026
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 362, 152170
Caragana fiber and natural clay-integrated multifunctional superabsorbent hydrogel for water-fertilizer-pollution regulation
- 21 April 2026
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 362, 152170
Caragana fiber and natural clay-integrated multifunctional superabsorbent hydrogel for water-fertilizer-pollution regulation
- 4 March 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (10) , 3569-3578
Activating Anionic Redox of Li-Rich Mn-Based Layered Oxide in All-Solid-State Batteries by Tailoring the Cathode Microstructure
Lithium-rich manganese-based layered oxides (LRMOs) are promising cathodes for high-energy-density Li-ion batteries. However, their cycle life is highly limited by gas release and Mn dissolution in liquid electrolytes. All-solid-state batteries (ASSBs) could overcome these issues by using solid electrolytes, provided that a stable cathode-catholyte interface is maintained. A key challenge is that the capacity of conventional polycrystalline LRMOs is difficult to activate in ASSBs due to the sluggish kinetics of anionic redox-limiting Li diffusivity. We demonstrate here that, by using monolithic LRMO particles without any surface modification, oxygen redox can be largely activated, enabling a capacity of 268.4 mAh g-1, in stark contrast with ∼70 mAh g-1 of conventional polycrystalline particles. We attribute this enhancement to improved cathode-electrolyte contact and a shortened Li+ diffusion pathway in the monolithic cathode microstructure. Our work provides a crucial step toward practical LRMO-based ASSBs by tailoring cathode microstructure in addition to interface engineering.
- 4 March 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (10) , 3569-3578
Activating Anionic Redox of Li-Rich Mn-Based Layered Oxide in All-Solid-State Batteries by Tailoring the Cathode Microstructure
Lithium-rich manganese-based layered oxides (LRMOs) are promising cathodes for high-energy-density Li-ion batteries. However, their cycle life is highly limited by gas release and Mn dissolution in liquid electrolytes. All-solid-state batteries (ASSBs) could overcome these issues by using solid electrolytes, provided that a stable cathode-catholyte interface is maintained. A key challenge is that the capacity of conventional polycrystalline LRMOs is difficult to activate in ASSBs due to the sluggish kinetics of anionic redox-limiting Li diffusivity. We demonstrate here that, by using monolithic LRMO particles without any surface modification, oxygen redox can be largely activated, enabling a capacity of 268.4 mAh g-1, in stark contrast with ∼70 mAh g-1 of conventional polycrystalline particles. We attribute this enhancement to improved cathode-electrolyte contact and a shortened Li+ diffusion pathway in the monolithic cathode microstructure. Our work provides a crucial step toward practical LRMO-based ASSBs by tailoring cathode microstructure in addition to interface engineering.