Fong-Zhi Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fong-Zhi Chen has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Wei-Chun Chen
National Center for Instrumentation Research, National Institutes of Applied Research, Hsinchu, Taiwan
4 shared publications Yu-Wei Lin
National Center for Instrumentation Research, National Institutes of Applied Research, Hsinchu, Taiwan
4 shared publicationsAowen Li
Institute of Engineering Innovation, the University of Tokyo, Tokyo, JAPAN
3 shared publicationsChang-Hsun Huang
Department of Materials Science and Engineering, National Taiwan University, Taipei, Taiwan
3 shared publicationsChien-Chih Tseng
Department of Chemical System Engineering, School of Engineering, The University of Tokyo, Tokyo, Japan
3 shared publicationsChih-Zong Deng
Research Center for Electronic and Optical Materials, National Institute for Materials Science (NIMS), Tsukuba, Japan
3 shared publications
Latest Publications
- 14 October 2026
- Published by Springer Nature in Nature
- Vol. 658 (8138) , E11
Author Correction: Wafer-scale epitaxy growth of high-mobility p-type boron carbon nitride
- 14 October 2026
- Published by Springer Nature in Nature
- Vol. 658 (8138) , E11
Author Correction: Wafer-scale epitaxy growth of high-mobility p-type boron carbon nitride
- 30 September 2026
- Published by Springer Nature in Nature
- Vol. 658 (8135) , 380-387
Wafer-scale epitaxy growth of high-mobility p-type boron carbon nitride
A long-standing bottleneck in realizing two-dimensional (2D) CMOS technology lies in the lack of high-performance p-type semiconductors1,2,3,4. Strong electron-doping tendencies, orbital localization and pronounced hole scattering have collectively impeded the development of stable, efficient p-type 2D materials. Here we report the epitaxy growth of boron carbon nitride (BCN) as a high-performance p-type semiconductor. By engineering the dehydrogenation and surface reaction pathways of monomethyl ammonia borane (MMAB) and ammonia borane (AB), we overcome a crucial barrier: the spatial and temporal mismatch in the delivery of boron (B), carbon (C) and nitrogen (N) atoms, which disrupts lattice uniformity. The result is a wafer-scale, monolayer 2D BCN in which C atoms and dimers primarily substitute for N sites within a continuously crystallized, locally distorted boron nitride lattice, leading to a sizable bandgap of 1.90 eV. Wafer-scale arrays of p-type BCN FETs exhibit benchmark performance, with a field-effect hole mobility of 100 cm2 V−1 s−1, on-current >0.9 mA μm−1, on–off ratio of 108 and threshold voltage of −0.45 V, surpassing current state-of-the-art p-type 2D semiconductors. Our findings establish BCN as a scalable and stable p-type platform, bridging a critical gap in the materials palette for three-dimensional monolithic integration of complementary electronics.
- 30 September 2026
- Published by Springer Nature in Nature
- Vol. 658 (8135) , 380-387
Wafer-scale epitaxy growth of high-mobility p-type boron carbon nitride
A long-standing bottleneck in realizing two-dimensional (2D) CMOS technology lies in the lack of high-performance p-type semiconductors1,2,3,4. Strong electron-doping tendencies, orbital localization and pronounced hole scattering have collectively impeded the development of stable, efficient p-type 2D materials. Here we report the epitaxy growth of boron carbon nitride (BCN) as a high-performance p-type semiconductor. By engineering the dehydrogenation and surface reaction pathways of monomethyl ammonia borane (MMAB) and ammonia borane (AB), we overcome a crucial barrier: the spatial and temporal mismatch in the delivery of boron (B), carbon (C) and nitrogen (N) atoms, which disrupts lattice uniformity. The result is a wafer-scale, monolayer 2D BCN in which C atoms and dimers primarily substitute for N sites within a continuously crystallized, locally distorted boron nitride lattice, leading to a sizable bandgap of 1.90 eV. Wafer-scale arrays of p-type BCN FETs exhibit benchmark performance, with a field-effect hole mobility of 100 cm2 V−1 s−1, on-current >0.9 mA μm−1, on–off ratio of 108 and threshold voltage of −0.45 V, surpassing current state-of-the-art p-type 2D semiconductors. Our findings establish BCN as a scalable and stable p-type platform, bridging a critical gap in the materials palette for three-dimensional monolithic integration of complementary electronics.
- 31 July 2026
- Published by Springer Nature in Nature Electronics
- Vol. 9 (9) , 1036-1045
High-transconductance molybdenum disulfide top-gate transistors using epitaxial interface engineering
- 31 July 2026
- Published by Springer Nature in Nature Electronics
- Vol. 9 (9) , 1036-1045
High-transconductance molybdenum disulfide top-gate transistors using epitaxial interface engineering
- Open Access
- 23 May 2026
- Published by Elsevier in Results in Optics
- Vol. 24
Relative illumination engineering of near infrared metalens based on mixed-pitch meta-atom
- 23 May 2026
- Published by Elsevier in Results in Optics
- Vol. 24
Open AccessRelative illumination engineering of near infrared metalens based on mixed-pitch meta-atom
- Open Access
- 28 August 2025
- Published by Springer Nature in Research Square
High-Mobility P-Type Boron Carbon Nitride with Wafer-Scale Uniformity
A long-standing bottleneck in realizing two-dimensional (2D) CMOS technology lies in the lack of high-performance p-type semiconductors. Strong electron-doping tendencies, orbital localization, and pronounced hole scattering have collectively impeded the development of stable, efficient p-type 2D materials. Here, we report the epitaxy growth of boron carbon nitride (BCN) as a high-performance p-type semiconductor. By engineering the dehydrogenation and surface reaction pathways of monomethyl ammonia borane (MMAB) and ammonia borane (AB), we overcome a critical barrier: the spatial and temporal mismatch in the delivery of B, C, and N atoms, which disrupts lattice uniformity. The result is a wafer-scale, monolayer 2D BCN with atomically substituted carbon and dimers interspersed between continuously crystallized and locally distorted boron nitride lattices, leading to a sizable bandgap of 1.90 eV. Wafer-scale arrays of p-type BCN FETs exhibit benchmark performance, with a field-effect hole mobility of 100 cm² V⁻¹s⁻¹, on-current of 0.9 mAμm⁻¹, on/off ratio of 10⁸, and threshold voltage of −0.45 V, surpassing current state-of-the-art p-type 2D semiconductors. Our findings establish BCN as a scalable and stable p-type platform, bridging a critical gap in the materials palette for 3D monolithic integration of complementary electronics.
- 28 August 2025
- Published by Springer Nature in Research Square
Open AccessHigh-Mobility P-Type Boron Carbon Nitride with Wafer-Scale Uniformity
A long-standing bottleneck in realizing two-dimensional (2D) CMOS technology lies in the lack of high-performance p-type semiconductors. Strong electron-doping tendencies, orbital localization, and pronounced hole scattering have collectively impeded the development of stable, efficient p-type 2D materials. Here, we report the epitaxy growth of boron carbon nitride (BCN) as a high-performance p-type semiconductor. By engineering the dehydrogenation and surface reaction pathways of monomethyl ammonia borane (MMAB) and ammonia borane (AB), we overcome a critical barrier: the spatial and temporal mismatch in the delivery of B, C, and N atoms, which disrupts lattice uniformity. The result is a wafer-scale, monolayer 2D BCN with atomically substituted carbon and dimers interspersed between continuously crystallized and locally distorted boron nitride lattices, leading to a sizable bandgap of 1.90 eV. Wafer-scale arrays of p-type BCN FETs exhibit benchmark performance, with a field-effect hole mobility of 100 cm² V⁻¹s⁻¹, on-current of 0.9 mAμm⁻¹, on/off ratio of 10⁸, and threshold voltage of −0.45 V, surpassing current state-of-the-art p-type 2D semiconductors. Our findings establish BCN as a scalable and stable p-type platform, bridging a critical gap in the materials palette for 3D monolithic integration of complementary electronics.
- Open Access
- 17 June 2025
- Published by IOP Publishing in 2D Materials
- Vol. 12 (3) , 035014
Unveiling the CVD growth mechanism of MoS2: exploring precursors, promoters, and evolution of reaction pathways
Transition metal dichalcogenides (TMDCs) have garnered significant attention as promising next-generation semiconductor materials due to their unique physical properties at the atomic scale. However, current synthesis techniques face challenges in achieving large-area uniformity and compatibility with integrated circuit processes, limiting their practical adoption in industry. In this study, we conduct a comprehensive investigation into the decomposition and phase evolution of the molybdenum precursor, MoO3, during MoS2 synthesis using H2S as the sulfur source. Our approach introduces water vapor (H2O) as a promoter, which plays a crucial role in enhancing the growth efficiency and crystallinity of MoS2. Through systematic characterizations, including Raman spectroscopy, photoluminescence, atomic force microscopy, and x-ray diffraction, we demonstrate that the introduction of water vapor significantly improves MoS2 growth by suppressing excessive reduction of MoO3 and forming volatile Mo2(OH)2 intermediates. This promotes large-area, high-crystallinity MoS2 growth under milder conditions. These findings provide a promising strategy for the scalable and high-quality synthesis of TMDCs, paving the way for their integration into high-performance electronic devices.
- 17 June 2025
- Published by IOP Publishing in 2D Materials
- Vol. 12 (3) , 035014
Open AccessUnveiling the CVD growth mechanism of MoS2: exploring precursors, promoters, and evolution of reaction pathways
Transition metal dichalcogenides (TMDCs) have garnered significant attention as promising next-generation semiconductor materials due to their unique physical properties at the atomic scale. However, current synthesis techniques face challenges in achieving large-area uniformity and compatibility with integrated circuit processes, limiting their practical adoption in industry. In this study, we conduct a comprehensive investigation into the decomposition and phase evolution of the molybdenum precursor, MoO3, during MoS2 synthesis using H2S as the sulfur source. Our approach introduces water vapor (H2O) as a promoter, which plays a crucial role in enhancing the growth efficiency and crystallinity of MoS2. Through systematic characterizations, including Raman spectroscopy, photoluminescence, atomic force microscopy, and x-ray diffraction, we demonstrate that the introduction of water vapor significantly improves MoS2 growth by suppressing excessive reduction of MoO3 and forming volatile Mo2(OH)2 intermediates. This promotes large-area, high-crystallinity MoS2 growth under milder conditions. These findings provide a promising strategy for the scalable and high-quality synthesis of TMDCs, paving the way for their integration into high-performance electronic devices.
- 29 July 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (5)
Broadband achromatic thermal metalens with a wide field of view based on wafer-level monolithic processes
We present a monolithic metalens free of chromatic aberration over the 8–12 μm wavelength range for thermal imaging. The metalens consists of nano-donut-pillars for dispersion engineering. The proposed metalens design is based on a telecentric optical system, which effectively eliminates off-focus distortion and aberration, enhancing overall imaging quality. Offering a 90° field of view, the metalens ensures uniform focal spot sizes within a 45° field angle across the working wavelength. This enables the capture of high-quality thermal images with sharp images and minimal distortion. With a diameter of 5.75 mm, the metalens is suitable for integration into commercial thermal imaging cameras. The nano-donut-pillar structure of the metalens allows for relatively straightforward mass production, involving i-line stepper lithography and silicon deep etching processes.
- 29 July 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (5)
Broadband achromatic thermal metalens with a wide field of view based on wafer-level monolithic processes
We present a monolithic metalens free of chromatic aberration over the 8–12 μm wavelength range for thermal imaging. The metalens consists of nano-donut-pillars for dispersion engineering. The proposed metalens design is based on a telecentric optical system, which effectively eliminates off-focus distortion and aberration, enhancing overall imaging quality. Offering a 90° field of view, the metalens ensures uniform focal spot sizes within a 45° field angle across the working wavelength. This enables the capture of high-quality thermal images with sharp images and minimal distortion. With a diameter of 5.75 mm, the metalens is suitable for integration into commercial thermal imaging cameras. The nano-donut-pillar structure of the metalens allows for relatively straightforward mass production, involving i-line stepper lithography and silicon deep etching processes.
- 27 April 2023
- Published by IOP Publishing in Surface Topography: Metrology and Properties
- Vol. 11 (2) , 024002
Effects of growth temperature on structural and electrical properties of in-rich InAlN–GaN heterostructures by radio-frequency metal–organic molecular beam epitaxy
In-rich InAlN is a promising nitride semiconductor alloy for high-efficiency solar cells and wide-range light-emitting diodes due to its tunable bandgap from 0.7 to 6.2 eV. However, incomplete characterization has led to inconsistent fundamental properties in some studies. The aim of this study was to comprehensively investigate the structural, optical, and electrical properties of In-rich InAlN films grown on GaN/Al2O3 templates by RF-MOMBE at various temperatures. The methodology involved state-of-the-art metrology techniques, such as high-resolution x-ray diffraction (HRXRD), scanning electron microscopy (FE-SEM), Hall effect measurements, and transmission electron microscopy (TEM). The results showed that all InxAl1-xN films were epitaxially grown on the GaN/Al2O3 template, with the indium composition (x) decreasing with increasing growth temperature. Furthermore, phase separation of the In-rich InAlN films occurred at high growth temperatures(>550 °C), resulting in a relatively smooth surface. The optical absorption method measured the band-gap of the InxAl1-xN films, which ranged from 1.7 to 1.9 eV for x values between 0.77 and 0.91. The mobility and carrier concentrations of all In-rich InAlN films were measured at ∼60−277 cm2 V−1-s−1 and 2–7 × 1019 cm3 in the growth temperature of range 450 °C–610 °C, respectively. In conclusion, our comprehensive characterization using advanced metrology methods provides valuable insights into the properties of In-rich InAlN films, which can inform future optimization of these materials for various applications.
- 27 April 2023
- Published by IOP Publishing in Surface Topography: Metrology and Properties
- Vol. 11 (2) , 024002
Effects of growth temperature on structural and electrical properties of in-rich InAlN–GaN heterostructures by radio-frequency metal–organic molecular beam epitaxy
In-rich InAlN is a promising nitride semiconductor alloy for high-efficiency solar cells and wide-range light-emitting diodes due to its tunable bandgap from 0.7 to 6.2 eV. However, incomplete characterization has led to inconsistent fundamental properties in some studies. The aim of this study was to comprehensively investigate the structural, optical, and electrical properties of In-rich InAlN films grown on GaN/Al2O3 templates by RF-MOMBE at various temperatures. The methodology involved state-of-the-art metrology techniques, such as high-resolution x-ray diffraction (HRXRD), scanning electron microscopy (FE-SEM), Hall effect measurements, and transmission electron microscopy (TEM). The results showed that all InxAl1-xN films were epitaxially grown on the GaN/Al2O3 template, with the indium composition (x) decreasing with increasing growth temperature. Furthermore, phase separation of the In-rich InAlN films occurred at high growth temperatures(>550 °C), resulting in a relatively smooth surface. The optical absorption method measured the band-gap of the InxAl1-xN films, which ranged from 1.7 to 1.9 eV for x values between 0.77 and 0.91. The mobility and carrier concentrations of all In-rich InAlN films were measured at ∼60−277 cm2 V−1-s−1 and 2–7 × 1019 cm3 in the growth temperature of range 450 °C–610 °C, respectively. In conclusion, our comprehensive characterization using advanced metrology methods provides valuable insights into the properties of In-rich InAlN films, which can inform future optimization of these materials for various applications.