Dhena Ria Barleany
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dhena Ria Barleany has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Erizal
Centre for Application of Isotopes and Radiation, Jakarta, Indonesia
2 shared publicationsMeri Yulvianti
Department of Chemical Engineering, Faculty of Engineering, Universitas Sultan Ageng Tirtayasa, Cilegon
2 shared publicationsA Gunawan
Universitas Sultan Ageng Tirtayasa
1 shared publicationA. Gunawan
1 shared publicationA.N. Afifah
1 shared publication- Adam Ruhiatna
Chemical Engineering Department, Universitas Sultan Ageng Tirtayasa, Jalan Jenderal Sudirman km. 3, Cilegon 42435, Indonesia
1 shared publication
Latest Publications
- Open Access
- 31 March 2025
- Published by Universitas Andalas in Jurnal Riset Kimia
- Vol. 16 (1) , 1-13
Green Coconut (Cocos nucifera L.) Husk Extract as Milk Freshness Indicator in Chitosan/ Polyvinyl Alcohol-based Smart Packaging Films
The growing demand for sustainable and eco-friendly food packaging has prompted research into innovative solutions that tackle environmental challenges and consumer health concerns. Food spoilage typically results from microbial activity, which is subsequently influenced by alterations in pH levels within the packaging environment. Plants, such as green coconut husk extract, contain anthocyanin, a water-soluble natural pigment with significant antioxidant and antibacterial properties, whose color changes in response to variations in the surrounding pH. This research focuses on the development of a pH-responsive packaging film utilizing chitosan and polyvinyl alcohol (PVA), integrated with green coconut (Cocos nucifera L.) husk extract, through a casting method to monitor milk freshness. An extraction procedure employing a maceration technique was conducted on green coconut husk utilizing methanol solvent with the incorporation of 1 % HCl (v/v). The thickness, mechanical properties, and pH-responsiveness of the resulting films with varying extract to chitosan volume ratios were examined in detail. The films were subsequently employed to monitor real-time applications concerning milk freshness. The results indicated that the addition of green coconut husk extract resulted in significant variations in the thickness, tensile strength, and elongation at the break of the film samples. The films exhibited thicknesses between 0.28 and 0.38 mm, demonstrating optimal mechanical properties at an extract-to-chitosan ratio of 4:1 (v/v), with tensile strength (TS) and elongation at break (EB) recorded at 4.65 MPa and 3.625%, respectively. The films exhibited a pH-sensitive color change from dark red to brown in acidic conditions. The findings indicate that the PVA/chitosan smart film, which contains green coconut husk extract, has the potential to serve as a deterioration indicator in packaged milk products.
- 31 March 2025
- Published by Universitas Andalas in Jurnal Riset Kimia
- Vol. 16 (1) , 1-13
Open AccessGreen Coconut (Cocos nucifera L.) Husk Extract as Milk Freshness Indicator in Chitosan/ Polyvinyl Alcohol-based Smart Packaging Films
The growing demand for sustainable and eco-friendly food packaging has prompted research into innovative solutions that tackle environmental challenges and consumer health concerns. Food spoilage typically results from microbial activity, which is subsequently influenced by alterations in pH levels within the packaging environment. Plants, such as green coconut husk extract, contain anthocyanin, a water-soluble natural pigment with significant antioxidant and antibacterial properties, whose color changes in response to variations in the surrounding pH. This research focuses on the development of a pH-responsive packaging film utilizing chitosan and polyvinyl alcohol (PVA), integrated with green coconut (Cocos nucifera L.) husk extract, through a casting method to monitor milk freshness. An extraction procedure employing a maceration technique was conducted on green coconut husk utilizing methanol solvent with the incorporation of 1 % HCl (v/v). The thickness, mechanical properties, and pH-responsiveness of the resulting films with varying extract to chitosan volume ratios were examined in detail. The films were subsequently employed to monitor real-time applications concerning milk freshness. The results indicated that the addition of green coconut husk extract resulted in significant variations in the thickness, tensile strength, and elongation at the break of the film samples. The films exhibited thicknesses between 0.28 and 0.38 mm, demonstrating optimal mechanical properties at an extract-to-chitosan ratio of 4:1 (v/v), with tensile strength (TS) and elongation at break (EB) recorded at 4.65 MPa and 3.625%, respectively. The films exhibited a pH-sensitive color change from dark red to brown in acidic conditions. The findings indicate that the PVA/chitosan smart film, which contains green coconut husk extract, has the potential to serve as a deterioration indicator in packaged milk products.
- Open Access
- 3 October 2024
- Published by University of Ilorin in Nigerian Journal of Technological Development
- Vol. 21 (3) , 1-9
Preparation and Characterization of Waste Fish Bone-Derived Gelatin/Chitosan Plastic Film Incorporated with Green Tea Extract
Fish-derived gelatin has recently been spotlighted as an alternative source following the negative issues of mammalian gelatin, but unfortunately it has poor mechanical properties that limit its application. Herein, an environmental-friendly film was prepared from milkfish (Chanos chanos) bone waste-derived gelatin and modified by adding chitosan, glycerol and sorbitol plasticizers as well as green tea extract to improve its mechanical properties. Gelatin was processed from milkfish bone waste using various concentrations of H2SO4 solution (2%, 3%, and 5%) (v/v) and soaking times of 18 h and 36 h for each of the solutions. The measurement test of pH, ash content, and moisture content were conducted on the gelatin product, and the characteristic functional groups were investigated using Fourier- Transform Infrared Spectroscopy (FTIR). The effect of green tea addition was also evaluated on the thickness, tensile strength, and elongation of the resulting films. The results showed that treatment using H2SO4 concentration of 3% with 36 hours of immersion time produced the best gelatin quality with a pH value of 5.9. Water content and ash content were 14.286% and 3.09%, respectively. The plastic film from this study has mechanical properties similar to polypropylene plastic so that it is expected to be a potential material for food packaging applications.
- 3 October 2024
- Published by University of Ilorin in Nigerian Journal of Technological Development
- Vol. 21 (3) , 1-9
Open AccessPreparation and Characterization of Waste Fish Bone-Derived Gelatin/Chitosan Plastic Film Incorporated with Green Tea Extract
Fish-derived gelatin has recently been spotlighted as an alternative source following the negative issues of mammalian gelatin, but unfortunately it has poor mechanical properties that limit its application. Herein, an environmental-friendly film was prepared from milkfish (Chanos chanos) bone waste-derived gelatin and modified by adding chitosan, glycerol and sorbitol plasticizers as well as green tea extract to improve its mechanical properties. Gelatin was processed from milkfish bone waste using various concentrations of H2SO4 solution (2%, 3%, and 5%) (v/v) and soaking times of 18 h and 36 h for each of the solutions. The measurement test of pH, ash content, and moisture content were conducted on the gelatin product, and the characteristic functional groups were investigated using Fourier- Transform Infrared Spectroscopy (FTIR). The effect of green tea addition was also evaluated on the thickness, tensile strength, and elongation of the resulting films. The results showed that treatment using H2SO4 concentration of 3% with 36 hours of immersion time produced the best gelatin quality with a pH value of 5.9. Water content and ash content were 14.286% and 3.09%, respectively. The plastic film from this study has mechanical properties similar to polypropylene plastic so that it is expected to be a potential material for food packaging applications.
- Open Access
- 31 December 2023
- Published by Universitas Mercu Buana in International Journal of Innovation in Mechanical Engineering and Advanced Materials
- Vol. 5 (3) , 109-117
BIOPOLYMER-BASED FILM PREPARATION FOR POTENTIAL SMART FOOD PACKAGING MATERIAL APLLICATION
Public interest in colorimetric films for food freshness monitoring has increased recently. In addition to extending the shelf life of packaged food products, packaging materials are also required to provide current information about the freshness of the food while ensuring food quality and safety. The current work aims to prepare smart biodegradable films based on biopolymer-containing color indicators to monitor the quality of Decapterus spp. The pH-sensing colorimetric film was developed from a chitosan biopolymer modified using polyvinyl alcohol (PVA) and glycerol, as well as methyl red, as an indicator of fish freshness. The effect of using PVA and stirring conditions (temperature and time) on film production was evaluated on its physical appearance, water vapor permeability, and mechanical properties. The results show that the use of PVA can increase the transparency of chitosan films. Incorporating PVA into the film results in brighter and clearer colors compared to films without PVA. The temperature used in the preparation of the film solution has an influence on the mechanical properties and the water vapor permeability. The increasing stirring temperature leads to the enhancement of Young's modulus and the barrier properties against water vapor and moisture, still concurrently impacting a decrease in the film's yield strength and strain. Additionally, the film also exhibits responsiveness to pH during fish spoilage, with a color change that occurs from pink to yellowish. This confirms that the pH-responsive film resulting from this research has great potential to be applied as a real-time indicator of fish freshness during storage.
- 31 December 2023
- Published by Universitas Mercu Buana in International Journal of Innovation in Mechanical Engineering and Advanced Materials
- Vol. 5 (3) , 109-117
Open AccessBIOPOLYMER-BASED FILM PREPARATION FOR POTENTIAL SMART FOOD PACKAGING MATERIAL APLLICATION
Public interest in colorimetric films for food freshness monitoring has increased recently. In addition to extending the shelf life of packaged food products, packaging materials are also required to provide current information about the freshness of the food while ensuring food quality and safety. The current work aims to prepare smart biodegradable films based on biopolymer-containing color indicators to monitor the quality of Decapterus spp. The pH-sensing colorimetric film was developed from a chitosan biopolymer modified using polyvinyl alcohol (PVA) and glycerol, as well as methyl red, as an indicator of fish freshness. The effect of using PVA and stirring conditions (temperature and time) on film production was evaluated on its physical appearance, water vapor permeability, and mechanical properties. The results show that the use of PVA can increase the transparency of chitosan films. Incorporating PVA into the film results in brighter and clearer colors compared to films without PVA. The temperature used in the preparation of the film solution has an influence on the mechanical properties and the water vapor permeability. The increasing stirring temperature leads to the enhancement of Young's modulus and the barrier properties against water vapor and moisture, still concurrently impacting a decrease in the film's yield strength and strain. Additionally, the film also exhibits responsiveness to pH during fish spoilage, with a color change that occurs from pink to yellowish. This confirms that the pH-responsive film resulting from this research has great potential to be applied as a real-time indicator of fish freshness during storage.
- Open Access
- 29 April 2023
- Published by Universitas Gadjah Mada in ASEAN Journal of Chemical Engineering
- Vol. 23 (1) , 28-39
Hydrogel Preparation from Shrimp Shell-Based Chitosan: The Degree of Crosslinking and Swelling Study
Chitosan is a natural polymer derived from different starting materials such as fish scales, crab and shrimp shells. Due to the advantages like biocompatibility and biodegradability, chitosan has been widely used in hydrogel development. This current study aims to make chitosan from shrimp shells, synthesize hydrogel from chitosan, and observe the effect of various chitosan preparation treatments on the properties of the hydrogel. The preparation of chitosan was carried out through demineralization, deproteinization, and deacetylation process. HCl concentration during demineralization and NaOH concentration during deproteinization were varied (1; 1,5; 2) M and (1; 1,5; 2) M, respectively. Chitin deacetylation was conducted using 60% (w/v) of NaOH at the temperature of 90oC for 120 min, and chitosan was resulted. Chitosan based hydrogel was then synthesized with the addition of alginate and glutaraldehyde. The effect of HCl and NaOH concentrations during demineralization and deproteinization on the deacetylation degree of chitosan was observed. The effect of deacetylation degree of chitosan on the degree of crosslinking and swelling property of the hydrogel were also evaluated. Chitosan resulted from this study has the optimum degree of deacetylation at 57.28 %, resulting from demineralization by using HCl 2M and deproteinization with NaOH2 M. Higher deacetilation degree of chitosan causing the increase of the degree of cross-linking and decrease of the swelling capacity of the hydrogel. The highest degree of cross-linking is 78.85 %, and the swelling capacity is 47 %.
- 29 April 2023
- Published by Universitas Gadjah Mada in ASEAN Journal of Chemical Engineering
- Vol. 23 (1) , 28-39
Open AccessHydrogel Preparation from Shrimp Shell-Based Chitosan: The Degree of Crosslinking and Swelling Study
Chitosan is a natural polymer derived from different starting materials such as fish scales, crab and shrimp shells. Due to the advantages like biocompatibility and biodegradability, chitosan has been widely used in hydrogel development. This current study aims to make chitosan from shrimp shells, synthesize hydrogel from chitosan, and observe the effect of various chitosan preparation treatments on the properties of the hydrogel. The preparation of chitosan was carried out through demineralization, deproteinization, and deacetylation process. HCl concentration during demineralization and NaOH concentration during deproteinization were varied (1; 1,5; 2) M and (1; 1,5; 2) M, respectively. Chitin deacetylation was conducted using 60% (w/v) of NaOH at the temperature of 90oC for 120 min, and chitosan was resulted. Chitosan based hydrogel was then synthesized with the addition of alginate and glutaraldehyde. The effect of HCl and NaOH concentrations during demineralization and deproteinization on the deacetylation degree of chitosan was observed. The effect of deacetylation degree of chitosan on the degree of crosslinking and swelling property of the hydrogel were also evaluated. Chitosan resulted from this study has the optimum degree of deacetylation at 57.28 %, resulting from demineralization by using HCl 2M and deproteinization with NaOH2 M. Higher deacetilation degree of chitosan causing the increase of the degree of cross-linking and decrease of the swelling capacity of the hydrogel. The highest degree of cross-linking is 78.85 %, and the swelling capacity is 47 %.
- Open Access
Chitosan-Graft-Poly(acrylic acid) Superabsorbent’s Water Holding in Sandy Soils and Its Application in Agriculture
Sandy soil has a low ability to absorb and store low water, low nutrient content, and a high water evaporation rate, so it is not suitable to be used as agricultural land. Superabsorbents can be used to overcome these weaknesses. The purpose of this study was to measure the abilities of the superabsorbents, including water holding, swelling, and water retention of sandy soil enriched with superabsorbent, and to analyze the chitosan-graft-poly(acrylic acid) superabsorbent characteristics. The superabsorbent was prepared by mixing a chitosan solution with ammonium persulfate as an initiator and acrylic acid, which had been neutralized with KOH. Then, the mixture was cross-linked with N,N′-methylenebisacrylamide (MBA). The resulting superabsorbent gel was dried in an oven and then crushed for analysis. The results showed that an increase in chitosan concentration increased the gel fraction, swelling, reusability, and water holding. Meanwhile, an increase in chitosan concentration decreased water retention in sandy soils. The swelling kinetics can be predicted using the pseudo-second-order model with high accuracy (R2 value of 0.99).
Open AccessChitosan-Graft-Poly(acrylic acid) Superabsorbent’s Water Holding in Sandy Soils and Its Application in Agriculture
Sandy soil has a low ability to absorb and store low water, low nutrient content, and a high water evaporation rate, so it is not suitable to be used as agricultural land. Superabsorbents can be used to overcome these weaknesses. The purpose of this study was to measure the abilities of the superabsorbents, including water holding, swelling, and water retention of sandy soil enriched with superabsorbent, and to analyze the chitosan-graft-poly(acrylic acid) superabsorbent characteristics. The superabsorbent was prepared by mixing a chitosan solution with ammonium persulfate as an initiator and acrylic acid, which had been neutralized with KOH. Then, the mixture was cross-linked with N,N′-methylenebisacrylamide (MBA). The resulting superabsorbent gel was dried in an oven and then crushed for analysis. The results showed that an increase in chitosan concentration increased the gel fraction, swelling, reusability, and water holding. Meanwhile, an increase in chitosan concentration decreased water retention in sandy soils. The swelling kinetics can be predicted using the pseudo-second-order model with high accuracy (R2 value of 0.99).
- 31 March 2022
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1057, 107-115
Fucoxanthin Extraction by Ultrasonic-Assisted from Brown Seaweed (Padina Sp) Origin Pulau Merak Banten
Seaweed is an underutilized resource with great potential in the food industry. Such as cosmetics, agrochemicals, biomass ingredients, bioenergy modifies. Indonesia is a country where two-thirds of its territory is marine. Fucoxanthin is a group of carotenoids found in abundance in marine macroalgae and has various health benefits. Traditional extraction (CE) of such potential biomolecules entails multiple steps that are both laborious and time-consuming. This study used ultrasound-assisted extraction (UAE) to extract high percentages of Fucoxanthin and phenolic compounds from the macroalga Padina sp. This research aims are to identification fucoxanthin compound in Padina Sp, determine the total phenolic content and composition of the pigment of Padina sp. This study also evaluates the effect of the extraction method concerning the time of exposure and solvent concentration on total phenolic content. Extract Padina Sp was further purified and characterized using FTIR. The pigment identification process is carried out by the thin layer chromatography method (TLC) and weigh mol using LC-MS. The results of the analyses present the highest content of TPC in Padina (755.633 mg GAE/mg) on 70 0C at 80% solvent concentration. Based on RSM methodology at 70 0C and 90 % solvent concentration. The active fraction of Fucoxanthin was identified at a Rf 0.96. The results of the RSM (Response Surface Methodology) showed the effect of concentration and temperature on the extraction of Fucoxanthin. The molecular weight of Fucoxanthin was found to be 659.43 m/z
- 31 March 2022
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1057, 107-115
Fucoxanthin Extraction by Ultrasonic-Assisted from Brown Seaweed (Padina Sp) Origin Pulau Merak Banten
Seaweed is an underutilized resource with great potential in the food industry. Such as cosmetics, agrochemicals, biomass ingredients, bioenergy modifies. Indonesia is a country where two-thirds of its territory is marine. Fucoxanthin is a group of carotenoids found in abundance in marine macroalgae and has various health benefits. Traditional extraction (CE) of such potential biomolecules entails multiple steps that are both laborious and time-consuming. This study used ultrasound-assisted extraction (UAE) to extract high percentages of Fucoxanthin and phenolic compounds from the macroalga Padina sp. This research aims are to identification fucoxanthin compound in Padina Sp, determine the total phenolic content and composition of the pigment of Padina sp. This study also evaluates the effect of the extraction method concerning the time of exposure and solvent concentration on total phenolic content. Extract Padina Sp was further purified and characterized using FTIR. The pigment identification process is carried out by the thin layer chromatography method (TLC) and weigh mol using LC-MS. The results of the analyses present the highest content of TPC in Padina (755.633 mg GAE/mg) on 70 0C at 80% solvent concentration. Based on RSM methodology at 70 0C and 90 % solvent concentration. The active fraction of Fucoxanthin was identified at a Rf 0.96. The results of the RSM (Response Surface Methodology) showed the effect of concentration and temperature on the extraction of Fucoxanthin. The molecular weight of Fucoxanthin was found to be 659.43 m/z
- 21 July 2020
- Published by International Journal of Technology in International Journal of Technology
- Vol. 11 (3) , 511-521
Controlled Release of Metformin Hydrogen Chloride from Stimuli-responsive Hydrogel based on Poly(N- Isopropylacrylamide)/Chitosan/Polyvinyl Alcohol Composite
Hydrogels are ideal biomaterials owing to their unique network structure that facilitates considerable hydrophilicity and biocompatibility. At the same time, hydrogels also possess soft physical properties when combined with living tissue. In this study, metformin hydrogen chloride (metformin HCl)-loaded stimuli-responsive poly(N-isopropylacrylamide) (pNIPAAm) –chitosan–polyvinyl alcohol (PVA) hydrogels were synthesized through a freezing and thawing procedure and subsequently subjected to gamma irradiation at room temperature. The gel content and the water absorption capacity of the synthesized hydrogels were analyzed. The polymer interaction in the matrix was observed by Fourier transform infrared spectroscopy, and the release of metformin HCl was studied in different pHs and temperatures. The hydrogels had 85% of the gel content and 373% of the water absorption capacity after 24 h of water immersion. The metformin HCl-loaded (pNIPAAm–chitosan–PVA) hydrogels demonstrated a sustained drug release profile over 7 h. The drug release exhibited pH-dependent and temperature-dependent behavior. The developed hydrogels showed good metformin HCl release ability at pH 3 and pH 6.86 at the temperature of 37oC. The results showed that pNIPAAm–chitosan–PVA hydrogels could be employed for controlled drug release of metformin HCl.
- 21 July 2020
- Published by International Journal of Technology in International Journal of Technology
- Vol. 11 (3) , 511-521
Controlled Release of Metformin Hydrogen Chloride from Stimuli-responsive Hydrogel based on Poly(N- Isopropylacrylamide)/Chitosan/Polyvinyl Alcohol Composite
Hydrogels are ideal biomaterials owing to their unique network structure that facilitates considerable hydrophilicity and biocompatibility. At the same time, hydrogels also possess soft physical properties when combined with living tissue. In this study, metformin hydrogen chloride (metformin HCl)-loaded stimuli-responsive poly(N-isopropylacrylamide) (pNIPAAm) –chitosan–polyvinyl alcohol (PVA) hydrogels were synthesized through a freezing and thawing procedure and subsequently subjected to gamma irradiation at room temperature. The gel content and the water absorption capacity of the synthesized hydrogels were analyzed. The polymer interaction in the matrix was observed by Fourier transform infrared spectroscopy, and the release of metformin HCl was studied in different pHs and temperatures. The hydrogels had 85% of the gel content and 373% of the water absorption capacity after 24 h of water immersion. The metformin HCl-loaded (pNIPAAm–chitosan–PVA) hydrogels demonstrated a sustained drug release profile over 7 h. The drug release exhibited pH-dependent and temperature-dependent behavior. The developed hydrogels showed good metformin HCl release ability at pH 3 and pH 6.86 at the temperature of 37oC. The results showed that pNIPAAm–chitosan–PVA hydrogels could be employed for controlled drug release of metformin HCl.
- Open Access
- 27 March 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 316 (1) , 012007
Degradation Behaviour of Gamma Irradiated Poly(Acrylic Acid)-graft-Chitosan Superabsorbent Hydrogel
- 27 March 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 316 (1) , 012007
Open AccessDegradation Behaviour of Gamma Irradiated Poly(Acrylic Acid)-graft-Chitosan Superabsorbent Hydrogel
- 1 January 2015
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1699, 040008
Swelling properties of cassava starch grafted with poly (potassium acrylate-co-acrylamide) superabsorbent hydrogel prepared by ionizing radiation
Natural and synthetic hydrophylic polymers can be phisically or chemically cross-linked in order to produce hydrogels. Starch based hydrogels grafted with copolymers from acrylic acid or acrylamide have become very popular for water absorbent application. Superabsorbent hydrogels made from Cassava starch grafted with poly (potassium acrylate-co-acrylamide) were prepared by using of ϒ-irradiation method. Various important parameters such as irradiation doses, monomer to Cassava starch ratio and acrylamide content were investigated. The addition of 7,5 % w w−1 acrylamide into the reaction mixture generated a starch graft copolymer with a water absorption in distilled water as high as 460 g g−1 of its dried weight. The effectivity of hydrogel as superabsorbent for aqueous solutions of NaCl and urea was evaluated. The obtained hydrogel showed the maximum absorptions of 317 g g−1 and 523 g g−1 for NaCl and urea solution, respectively (relative to its own dry weight). The structure of the graft copolymer was analyzed by using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM).
- 1 January 2015
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1699, 040008
Swelling properties of cassava starch grafted with poly (potassium acrylate-co-acrylamide) superabsorbent hydrogel prepared by ionizing radiation
Natural and synthetic hydrophylic polymers can be phisically or chemically cross-linked in order to produce hydrogels. Starch based hydrogels grafted with copolymers from acrylic acid or acrylamide have become very popular for water absorbent application. Superabsorbent hydrogels made from Cassava starch grafted with poly (potassium acrylate-co-acrylamide) were prepared by using of ϒ-irradiation method. Various important parameters such as irradiation doses, monomer to Cassava starch ratio and acrylamide content were investigated. The addition of 7,5 % w w−1 acrylamide into the reaction mixture generated a starch graft copolymer with a water absorption in distilled water as high as 460 g g−1 of its dried weight. The effectivity of hydrogel as superabsorbent for aqueous solutions of NaCl and urea was evaluated. The obtained hydrogel showed the maximum absorptions of 317 g g−1 and 523 g g−1 for NaCl and urea solution, respectively (relative to its own dry weight). The structure of the graft copolymer was analyzed by using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM).