Pep Bruguera
Pep Bruguera has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Claudia Delgado Simao
Centre Tecnolgic de Catalunya, Parc Cientfic i de la Innovaci Tecno Campus, Matar, Eurecat, Spain
2 shared publications - Ferran Martin
Universitat Autónoma de Barcelona
2 shared publications - Ferran Paredes
Universitat Autónoma de Barcelona
2 shared publications - Ana Moya
Campus Universitat Autónoma de Barcelona
1 shared publication - Ana Moya
Eurecat, Centre Tecnològic de Catalunya, Parc Científic i de la Innovació TecnoCampus, 08302 Mataró, Spain
1 shared publication - Cristian Herrojo
CIMITEC, Departament d’Enginyeria Electrònica, Universitat Autònoma de Barcelona, 08193 Bellaterra, Spain
1 shared publication
Latest Publications
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-12
Motion Control System for Industrial Scenarios Based on Electromagnetic Encoders
In this paper, a complete system useful for the measurement of the absolute position, velocity, and acceleration of moving objects in industrial scenarios (such as conveyor transport devices, elevators, escalators, and other mechanical systems) is presented. The proposed system contains an electromagnetic encoder consisting of a pair of chains of metallic patches screen-printed on a rubber belt. In one of the chains (designated as clock/velocity chain), the patches are printed at predefined periodic positions. Such clock chain generates also the clock signal necessary to read the other chain (position chain), with patches either present (binary state ‘1’) or absent (binary state ‘0’) at their predefined positions. The system includes a reader based on a transmission line with three resonators etched on the ground plane and fed with three harmonic signals. Such three elements are complementary split ring resonators (CSRRs), which are sensitive to the presence of patches at short distance on top of them, and therefore they are used to detect the patches as the encoder moves with regard to the reader. By encoder motion, the patches generate three amplitude modulation (AM) signals, providing the velocity (and acceleration), the absolute encoder position, and the motion direction. A prototype system, including the encoder, the reader and the associated electronics is designed, fabricated and validated.
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-12
Motion Control System for Industrial Scenarios Based on Electromagnetic Encoders
In this paper, a complete system useful for the measurement of the absolute position, velocity, and acceleration of moving objects in industrial scenarios (such as conveyor transport devices, elevators, escalators, and other mechanical systems) is presented. The proposed system contains an electromagnetic encoder consisting of a pair of chains of metallic patches screen-printed on a rubber belt. In one of the chains (designated as clock/velocity chain), the patches are printed at predefined periodic positions. Such clock chain generates also the clock signal necessary to read the other chain (position chain), with patches either present (binary state ‘1’) or absent (binary state ‘0’) at their predefined positions. The system includes a reader based on a transmission line with three resonators etched on the ground plane and fed with three harmonic signals. Such three elements are complementary split ring resonators (CSRRs), which are sensitive to the presence of patches at short distance on top of them, and therefore they are used to detect the patches as the encoder moves with regard to the reader. By encoder motion, the patches generate three amplitude modulation (AM) signals, providing the velocity (and acceleration), the absolute encoder position, and the motion direction. A prototype system, including the encoder, the reader and the associated electronics is designed, fabricated and validated.
- Open Access
Electromagnetic Encoders Screen-Printed on Rubber Belts for Absolute Measurement of Position and Velocity
This paper presents, for the first time, an absolute linear electromagnetic encoder consisting of a rubber belt with two chains of screen-printed metallic inclusions (rectangular patches). The position, velocity, and direction of the belt (the moving part) is determined by detecting the inclusions when they cross the stator (the static part). The stator is a microstrip line loaded with three complementary split ring resonators (CSRRs), resonant elements exhibiting a resonance frequency perturbed by the presence of inclusions on top of them (contactless). The line is fed by three harmonic signals tuned to the resonance frequencies of the CSRRs. Such signals are generated by a voltage-controlled oscillator (VCO) managed by a microcontroller. The sensed data are retrieved from the pulses contained in the envelope functions of the respective amplitude modulated (AM) signals (caused by the belt motion) generated at the output port of the line. One of the signals provides the absolute belt position, determined by one of the chains, the encoded one. The information relative to the velocity and motion direction is contained in the other AM signals generated by the motion of the other chain, periodic, and thereby, uncoded. The spatial resolution of the system, a figure of merit, is 4 mm. Special emphasis is devoted to the printing process of the belt inclusions.
Open AccessElectromagnetic Encoders Screen-Printed on Rubber Belts for Absolute Measurement of Position and Velocity
This paper presents, for the first time, an absolute linear electromagnetic encoder consisting of a rubber belt with two chains of screen-printed metallic inclusions (rectangular patches). The position, velocity, and direction of the belt (the moving part) is determined by detecting the inclusions when they cross the stator (the static part). The stator is a microstrip line loaded with three complementary split ring resonators (CSRRs), resonant elements exhibiting a resonance frequency perturbed by the presence of inclusions on top of them (contactless). The line is fed by three harmonic signals tuned to the resonance frequencies of the CSRRs. Such signals are generated by a voltage-controlled oscillator (VCO) managed by a microcontroller. The sensed data are retrieved from the pulses contained in the envelope functions of the respective amplitude modulated (AM) signals (caused by the belt motion) generated at the output port of the line. One of the signals provides the absolute belt position, determined by one of the chains, the encoded one. The information relative to the velocity and motion direction is contained in the other AM signals generated by the motion of the other chain, periodic, and thereby, uncoded. The spatial resolution of the system, a figure of merit, is 4 mm. Special emphasis is devoted to the printing process of the belt inclusions.