Shantanu Paul
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shantanu Paul has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Shariful Islam
Department of Civil Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh
7 shared publications Mohammad Shariful Islam
5 shared publicationsJaya Majumder
3 shared publications- Anas Bin Faruque
Department of Civil Engineering , Bangladesh University of Engineering and Technology , Dhaka , Bangladesh , buet.ac.bd
2 shared publications - Promita Chakraborty
Department of Civil Engineering , Bangladesh University of Engineering and Technology , Dhaka , Bangladesh , buet.ac.bd
2 shared publications - Tisha Sikder
Department of Civil Engineering, Bangladesh University of Engineering and Technology
2 shared publications
Latest Publications
- Open Access
- 28 October 2026
- Published by Elsevier in Next Materials
- Vol. 13
Stabilization of sandy soil using soybean-derived EICP and sewage sludge ash
- 28 October 2026
- Published by Elsevier in Next Materials
- Vol. 13
Open AccessStabilization of sandy soil using soybean-derived EICP and sewage sludge ash
- Open Access
- 29 August 2026
- Published by Elsevier in Next Materials
- Vol. 13
Compressed stabilized earth blocks incorporating cement and waste cotton fiber: Mechanical, durability and life-cycle performance
- 29 August 2026
- Published by Elsevier in Next Materials
- Vol. 13
Open AccessCompressed stabilized earth blocks incorporating cement and waste cotton fiber: Mechanical, durability and life-cycle performance
- 1 July 2026
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 38 (7) , 04026209
Optimization of Micromechanical Properties of Compressed Stabilized Earth Blocks Using Cement and Sewage Sludge Ash
This research explores the potential of sewage sludge ash (SSA) as a sustainable substitute option for cement in fabricating compressed stabilized earth blocks (CSEBs), enhancing both envir... Practical ApplicationsThis study presents a practical and eco-friendly solution for enhancing CSEBs by incorporating SSA as a partial replacement for cement. The approach not only improves the mech...
- 1 July 2026
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 38 (7) , 04026209
Optimization of Micromechanical Properties of Compressed Stabilized Earth Blocks Using Cement and Sewage Sludge Ash
This research explores the potential of sewage sludge ash (SSA) as a sustainable substitute option for cement in fabricating compressed stabilized earth blocks (CSEBs), enhancing both envir... Practical ApplicationsThis study presents a practical and eco-friendly solution for enhancing CSEBs by incorporating SSA as a partial replacement for cement. The approach not only improves the mech...
- Open Access
- 30 April 2026
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 30 (8)
Stabilization of expansive soil using rice husk biochar and stimulation of soil-native bacteria: Mechanical and microstructural analysis
- 30 April 2026
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 30 (8)
Open AccessStabilization of expansive soil using rice husk biochar and stimulation of soil-native bacteria: Mechanical and microstructural analysis
- 27 March 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 521
Strength, durability, and life cycle assessment of compressed stabilized earth blocks with ceramic waste powder
- 27 March 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 521
Strength, durability, and life cycle assessment of compressed stabilized earth blocks with ceramic waste powder
- Open Access
- 1 January 2026
- Published by Wiley in Advances in Civil Engineering
- Vol. 2026 (1) , 4943995
Reducing Lime Demand in Expansive Soil Stabilization via MICP Bio‐Stimulation: A Mechanical and Microstructural Assessment
This research explores the stabilization of expansive soils by integrating microbially induced calcite precipitation (MICP) bio‐stimulation with hydraulic lime (HL). Expansive soils, known for substantial volumetric fluctuations due to moisture changes, pose severe geotechnical risks to infrastructure. To reduce reliance on conventional chemical stabilizers, HL was partially substituted with bio‐stimulation of the indigenous microbial community. The research assessed HL contents of 6%, 9%, and 12% combined with MICP mellowing durations of 2, 4, and 6 days. Among the reduced‐lime combinations, M4L9 (9% lime with a 4‐day mellowing period) provided the strongest overall response. Compared with soil stabilized using 12% lime alone, M4L9 increased unconfined compressive strength by 52%, split tensile strength (STS) by 67%, and soaked California bearing ratio (CBR) by 93%. Volumetric stability also improved, with swell strain reduced by 97.0%, free swell index (FSI) by 98.5% relative to the untreated soil, and linear shrinkage (LS) limited to 2.86%. SEM showed a denser, more cohesive matrix with morphologies consistent with carbonate precipitation and lime‐derived hydration products, while FTIR supported the presence of carbonate‐bearing and cementitious reaction products. CaCO 3 ‐equivalent carbonate content increased from 1.30 wt% in the untreated soil to 3.37 wt% after 4 days of bio‐stimulation, confirming carbonate precipitation, while the TGA‐DSC interval mass losses are reported as operationally defined quantities rather than as a ranking of reaction‐product content between treatments. 16S rRNA gene amplicon sequencing showed that the relative abundance of phyla containing previously reported ureolytic taxa was highest after 4 days of mellowing, providing taxonomic evidence consistent with the selected mellowing period. A materials‐stage life cycle assessment showed performance‐normalized CO 2 ‐intensity reductions of 32.6% to 47.1% for M4L9 relative to L12. Under field‐grade reagent assumptions, its material cost was 94.7% of L12. These results indicate that MICP bio‐stimulation can reduce lime demand while maintaining or improving engineering performance.
- 1 January 2026
- Published by Wiley in Advances in Civil Engineering
- Vol. 2026 (1) , 4943995
Open AccessReducing Lime Demand in Expansive Soil Stabilization via MICP Bio‐Stimulation: A Mechanical and Microstructural Assessment
This research explores the stabilization of expansive soils by integrating microbially induced calcite precipitation (MICP) bio‐stimulation with hydraulic lime (HL). Expansive soils, known for substantial volumetric fluctuations due to moisture changes, pose severe geotechnical risks to infrastructure. To reduce reliance on conventional chemical stabilizers, HL was partially substituted with bio‐stimulation of the indigenous microbial community. The research assessed HL contents of 6%, 9%, and 12% combined with MICP mellowing durations of 2, 4, and 6 days. Among the reduced‐lime combinations, M4L9 (9% lime with a 4‐day mellowing period) provided the strongest overall response. Compared with soil stabilized using 12% lime alone, M4L9 increased unconfined compressive strength by 52%, split tensile strength (STS) by 67%, and soaked California bearing ratio (CBR) by 93%. Volumetric stability also improved, with swell strain reduced by 97.0%, free swell index (FSI) by 98.5% relative to the untreated soil, and linear shrinkage (LS) limited to 2.86%. SEM showed a denser, more cohesive matrix with morphologies consistent with carbonate precipitation and lime‐derived hydration products, while FTIR supported the presence of carbonate‐bearing and cementitious reaction products. CaCO 3 ‐equivalent carbonate content increased from 1.30 wt% in the untreated soil to 3.37 wt% after 4 days of bio‐stimulation, confirming carbonate precipitation, while the TGA‐DSC interval mass losses are reported as operationally defined quantities rather than as a ranking of reaction‐product content between treatments. 16S rRNA gene amplicon sequencing showed that the relative abundance of phyla containing previously reported ureolytic taxa was highest after 4 days of mellowing, providing taxonomic evidence consistent with the selected mellowing period. A materials‐stage life cycle assessment showed performance‐normalized CO 2 ‐intensity reductions of 32.6% to 47.1% for M4L9 relative to L12. Under field‐grade reagent assumptions, its material cost was 94.7% of L12. These results indicate that MICP bio‐stimulation can reduce lime demand while maintaining or improving engineering performance.
- Open Access
- 1 January 2026
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2026 (1) , 2024022
Sustainable Stabilization of Expansive Clay Using Lime and Steel Slag
Expansive clays undergo moisture‐induced swelling and shrinkage that can cause serviceability loss in lightly loaded structures and pavements. In Bangladesh, stabilization of such clay is a geotechnical concern, while steel slag generated from local steel industries remains an underutilized calcium‐rich by‐product. Although lime is a well‐established calcium‐based stabilizer, its energy‐intensive production motivates evaluation of steel slag as a complementary stabilizing agent. This study evaluates lime, steel slag, and equal‐mass lime–steel slag blends for stabilizing a high‐plastic expansive clay from Char Bishwanath, Sirajdikhan, Munshiganj, classified as fat clay (CH) according to the Unified Soil Classification System (USCS). A dosage‐resolved, replicate‐based program included index and shrinkage tests, free swell index (FSI), one‐dimensional swelling up to 90 days, unconfined compressive strength (UCS), pH, and scanning electron microscopy (SEM). Additives were mixed at 3%–15% by dry soil mass. UCS and one‐dimensional swell specimens were compacted at the untreated soil’s optimum moisture content and maximum dry density, sealed, and cured at 25°C ± 2°C; FSI was measured separately on uncured oven‐dried mixtures after 24 h immersion. Results are reported as mean ± standard deviation from three replicates, with untreated soil as the control. The FSI decreased from 90.0% ± 5.0% to 7.1% ± 0.8% with 15% lime, 21.4% ± 2.5% with 9% steel slag, and 9.1% ± 1.0% with the 6% total lime–steel slag blend (3% lime + 3% steel slag). After 90 days, treated specimens reached swell strains of 0.1%–0.2% and swell pressures of 1.71–5.85 kPa, compared with 53.07% and 96.47 kPa for untreated soil. UCS improved relative to untreated clay but varied nonmonotonically with curing time. SEM showed densification, aggregation, pore filling, and gel‐like products morphologically consistent with cementitious bonding. Lime most consistently reduced FSI at high dosage, steel slag minimized long‐term swell pressure, and optimized blends provided balanced performance.
- 1 January 2026
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2026 (1) , 2024022
Open AccessSustainable Stabilization of Expansive Clay Using Lime and Steel Slag
Expansive clays undergo moisture‐induced swelling and shrinkage that can cause serviceability loss in lightly loaded structures and pavements. In Bangladesh, stabilization of such clay is a geotechnical concern, while steel slag generated from local steel industries remains an underutilized calcium‐rich by‐product. Although lime is a well‐established calcium‐based stabilizer, its energy‐intensive production motivates evaluation of steel slag as a complementary stabilizing agent. This study evaluates lime, steel slag, and equal‐mass lime–steel slag blends for stabilizing a high‐plastic expansive clay from Char Bishwanath, Sirajdikhan, Munshiganj, classified as fat clay (CH) according to the Unified Soil Classification System (USCS). A dosage‐resolved, replicate‐based program included index and shrinkage tests, free swell index (FSI), one‐dimensional swelling up to 90 days, unconfined compressive strength (UCS), pH, and scanning electron microscopy (SEM). Additives were mixed at 3%–15% by dry soil mass. UCS and one‐dimensional swell specimens were compacted at the untreated soil’s optimum moisture content and maximum dry density, sealed, and cured at 25°C ± 2°C; FSI was measured separately on uncured oven‐dried mixtures after 24 h immersion. Results are reported as mean ± standard deviation from three replicates, with untreated soil as the control. The FSI decreased from 90.0% ± 5.0% to 7.1% ± 0.8% with 15% lime, 21.4% ± 2.5% with 9% steel slag, and 9.1% ± 1.0% with the 6% total lime–steel slag blend (3% lime + 3% steel slag). After 90 days, treated specimens reached swell strains of 0.1%–0.2% and swell pressures of 1.71–5.85 kPa, compared with 53.07% and 96.47 kPa for untreated soil. UCS improved relative to untreated clay but varied nonmonotonically with curing time. SEM showed densification, aggregation, pore filling, and gel‐like products morphologically consistent with cementitious bonding. Lime most consistently reduced FSI at high dosage, steel slag minimized long‐term swell pressure, and optimized blends provided balanced performance.
- Open Access
- 1 January 2026
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2026 (1) , 3723729
Strength and Volume Change Behavior of Expansive Subgrade Soil Treated With Cement, Sugarcane Bagasse, and Nylon Fibers
Expansive subgrade soils pose persistent challenges to pavement and foundation engineering due to their pronounced shrink–swell behavior and limited load‐bearing capacity. This study investigates a hybrid stabilization strategy that combines ordinary Portland cement with sugarcane bagasse fibers and synthetic nylon fibers to simultaneously enhance strength and suppress volumetric deformation in expansive clay. The coarse, uneven surface of bagasse fibers promotes interfacial bonding with the cementitious matrix, while the high tensile capacity, low moisture affinity, and ductility of nylon fibers provide post–peak load transfer and crack bridging. To rigorously isolate the synergistic contribution of the hybrid system, single‐fiber control mixtures were tested alongside the hybrid mixtures. Laboratory characterization included unconfined compressive strength (UCS), split tensile strength (STS), free swell index, one‐dimensional swell, and linear shrinkage tests, with microstructural and spectroscopic confirmation through scanning electron microscopy and Fourier transform infrared spectroscopy. Cement and hybrid‐fiber treatment yielded strength gains of up to 636% in UCS and 380% in STS and reduced linear shrinkage by up to 98% relative to the untreated soil. At equal cement content and total fiber dosage, the hybrid bagasse and nylon system outperformed both single‐fiber controls in UCS, STS, and swelling suppression, providing direct quantitative evidence of synergistic reinforcement rather than a merely additive contribution. Although the highest UCS was obtained at the lower hybrid‐fiber dosage in the 8% OPC series, the mixture containing 0.5% bagasse and 0.5% nylon delivered the most balanced tensile and shrink–swell performance. These findings establish hybrid natural and synthetic fiber reinforcement as a robust and sustainable strategy for stabilizing expansive subgrade soils.
- 1 January 2026
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2026 (1) , 3723729
Open AccessStrength and Volume Change Behavior of Expansive Subgrade Soil Treated With Cement, Sugarcane Bagasse, and Nylon Fibers
Expansive subgrade soils pose persistent challenges to pavement and foundation engineering due to their pronounced shrink–swell behavior and limited load‐bearing capacity. This study investigates a hybrid stabilization strategy that combines ordinary Portland cement with sugarcane bagasse fibers and synthetic nylon fibers to simultaneously enhance strength and suppress volumetric deformation in expansive clay. The coarse, uneven surface of bagasse fibers promotes interfacial bonding with the cementitious matrix, while the high tensile capacity, low moisture affinity, and ductility of nylon fibers provide post–peak load transfer and crack bridging. To rigorously isolate the synergistic contribution of the hybrid system, single‐fiber control mixtures were tested alongside the hybrid mixtures. Laboratory characterization included unconfined compressive strength (UCS), split tensile strength (STS), free swell index, one‐dimensional swell, and linear shrinkage tests, with microstructural and spectroscopic confirmation through scanning electron microscopy and Fourier transform infrared spectroscopy. Cement and hybrid‐fiber treatment yielded strength gains of up to 636% in UCS and 380% in STS and reduced linear shrinkage by up to 98% relative to the untreated soil. At equal cement content and total fiber dosage, the hybrid bagasse and nylon system outperformed both single‐fiber controls in UCS, STS, and swelling suppression, providing direct quantitative evidence of synergistic reinforcement rather than a merely additive contribution. Although the highest UCS was obtained at the lower hybrid‐fiber dosage in the 8% OPC series, the mixture containing 0.5% bagasse and 0.5% nylon delivered the most balanced tensile and shrink–swell performance. These findings establish hybrid natural and synthetic fiber reinforcement as a robust and sustainable strategy for stabilizing expansive subgrade soils.
- Open Access
- 21 August 2025
- Published by Elsevier in Results in Engineering
- Vol. 27
Effect of cement and sugarcane bagasse ash on the micro-mechanical characteristics of expansive soil
- 21 August 2025
- Published by Elsevier in Results in Engineering
- Vol. 27
Open AccessEffect of cement and sugarcane bagasse ash on the micro-mechanical characteristics of expansive soil