Lukas Fara
Research Subjects
Research Interests
Lukas Fara has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- František Lopot
Department of Designing and Machine Components, Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, Prague 6, 160 00 Dejvice, Czech Republic
4 shared publications - Karel Jelen
Department of Anatomy and Biomechanics, Charles University, 162 52 Prague, Czech Republic
4 shared publications - Lubos Tomsovsky
Department of Sport Sciences and Biomedicine, Charles University, Prague, Czech Republic
4 shared publications - Petr Kubovy
Department of Anatomy and Biomechanics, Charles University, 162 52 Prague, Czech Republic
4 shared publications - Hynek Purs
Advanced Engineering s.r.o., Prague, Czech Republic
3 shared publications - Martin Novák
J.E.Purkyně University
3 shared publications
Latest Publications
- 9 February 2024
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2678 (9) , 196-202
Tram-Pedestrian Collision Modeling Using Experimental Data—Its Validation, Repeatability, and Challenges: A Pilot Study
To satisfy the needs of growing urban populations, mitigate the impacts of climate change, and improve the environmental conditions and quality of life in cities, there has been an increasing demand for public transport, especially effective and economically beneficial trams. As a consequence, the issue of pedestrians’ safety has become more important because of a higher risk of tram-pedestrian collisions. The article is focused on the development of a computational model that can accurately simulate such collisions, and its challenges and limitations. Experiments were conducted using various types of trams, different impact speeds, and an anthropomorphic test device (dummy). Computational models of the tram front ends were created based on CAD geometry supplied by VÚKV a.s. The finite-element mesh itself used a combination of 1D, 2D, and 3D elements. Depending on the shape of the individual components, TRIA, QUAD, HEX, PENTA, and TETRA elements were used for modeling. The results showed that the consequences of these collisions are sensitive to small differences in the posture of the dummies. Therefore, it is difficult to identify a generally more pedestrian-friendly shape for trams using the dummy-tram crash test method.
- 9 February 2024
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 2678 (9) , 196-202
Tram-Pedestrian Collision Modeling Using Experimental Data—Its Validation, Repeatability, and Challenges: A Pilot Study
To satisfy the needs of growing urban populations, mitigate the impacts of climate change, and improve the environmental conditions and quality of life in cities, there has been an increasing demand for public transport, especially effective and economically beneficial trams. As a consequence, the issue of pedestrians’ safety has become more important because of a higher risk of tram-pedestrian collisions. The article is focused on the development of a computational model that can accurately simulate such collisions, and its challenges and limitations. Experiments were conducted using various types of trams, different impact speeds, and an anthropomorphic test device (dummy). Computational models of the tram front ends were created based on CAD geometry supplied by VÚKV a.s. The finite-element mesh itself used a combination of 1D, 2D, and 3D elements. Depending on the shape of the individual components, TRIA, QUAD, HEX, PENTA, and TETRA elements were used for modeling. The results showed that the consequences of these collisions are sensitive to small differences in the posture of the dummies. Therefore, it is difficult to identify a generally more pedestrian-friendly shape for trams using the dummy-tram crash test method.
- Open Access
- 6 December 2023
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 23 (5) , 717-724
Head Impacts during the Direct Frontal (Forehead) and Side (Temple) Collision - Human vs. Hybrid III Dummy
The paper is focused on the dynamic response of Hybrid III crash-test dummy during low-severity frontal (forehead) and side (temple) head impacts. The measurements used a pedestrian dummy (Hybrid III 50th percentile male dummy, Jasti Co., ltd., Tokyo, Japan) and a unique pendulum impact testing machine (impactor) of own design and construction. The tests were conducted at two various impact intensities (velocities) that did not exceed the speed of 1.6 m/s. The primary outcome variable was a resultant magnitude of acceleration measured on the vertex of dummy's head and the results were compared to 11 human volunteers. The goal of the study was to analyse the biofidelity of Hybrid III Dummy in a pedestrian setting during low-severity frontal and side head impacts by comparing the dynamics and kinematics of the dummy's head to human volunteers.
- 6 December 2023
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 23 (5) , 717-724
Open AccessHead Impacts during the Direct Frontal (Forehead) and Side (Temple) Collision - Human vs. Hybrid III Dummy
The paper is focused on the dynamic response of Hybrid III crash-test dummy during low-severity frontal (forehead) and side (temple) head impacts. The measurements used a pedestrian dummy (Hybrid III 50th percentile male dummy, Jasti Co., ltd., Tokyo, Japan) and a unique pendulum impact testing machine (impactor) of own design and construction. The tests were conducted at two various impact intensities (velocities) that did not exceed the speed of 1.6 m/s. The primary outcome variable was a resultant magnitude of acceleration measured on the vertex of dummy's head and the results were compared to 11 human volunteers. The goal of the study was to analyse the biofidelity of Hybrid III Dummy in a pedestrian setting during low-severity frontal and side head impacts by comparing the dynamics and kinematics of the dummy's head to human volunteers.
- Open Access
- 5 September 2023
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 23 (4) , 418-425
Experimental Validation of the Biomechanical Response of an Anthropo-morphic Testing Device (Dummy) at Low Impact Velocities
The paper describes the experimental validation of the biomechanical response of the Hybrid III 50th Percentile Male Pedestrian Dummy (JASTI, Tokyo, Japan) at low impact velocity (up to 2.2 m/s) in comparison with that of human probands. The paper is based on previous research that was focused on the tram-pedestrian crash tests using the same dummy. The biofidelity of dummy was analysed in two collision scenarios: the anteroposterior impact (chest impact) and lateral impact (shoulder impact) using a unique pendulum impact testing machine of own design and construction. The primary outcome variable was the peak resultant acceleration of the head and chest during the impact. Based on the labbased measurements, the unique impact testing machine was found adequate and precise for the purposes of future crash-test analyses in the area of automotive industry. The proposed methodology and measurement protocol were shown proper to compare the data between the dummy and human participants. Following the pilot experiments, the kinematic and dynamic data between the dummy and human participants were analysed to assess the biofidelity of dummy for the frontal and side impact during tram-pedestrian collisions at low impact velocities.
- 5 September 2023
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 23 (4) , 418-425
Open AccessExperimental Validation of the Biomechanical Response of an Anthropo-morphic Testing Device (Dummy) at Low Impact Velocities
The paper describes the experimental validation of the biomechanical response of the Hybrid III 50th Percentile Male Pedestrian Dummy (JASTI, Tokyo, Japan) at low impact velocity (up to 2.2 m/s) in comparison with that of human probands. The paper is based on previous research that was focused on the tram-pedestrian crash tests using the same dummy. The biofidelity of dummy was analysed in two collision scenarios: the anteroposterior impact (chest impact) and lateral impact (shoulder impact) using a unique pendulum impact testing machine of own design and construction. The primary outcome variable was the peak resultant acceleration of the head and chest during the impact. Based on the labbased measurements, the unique impact testing machine was found adequate and precise for the purposes of future crash-test analyses in the area of automotive industry. The proposed methodology and measurement protocol were shown proper to compare the data between the dummy and human participants. Following the pilot experiments, the kinematic and dynamic data between the dummy and human participants were analysed to assess the biofidelity of dummy for the frontal and side impact during tram-pedestrian collisions at low impact velocities.
- Open Access
- 5 July 2023
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 23 (3) , 298-306
The Biomechanics of Head Injuries during Tram-Pedestrian Accidents
The goal of the study was to analyse the kinematic and dynamic response of the human head during the primary impact of tram-pedestrian collisions. The anthropomorphic test device (dummy) was used for two collision scenarios: the frontal (dummy facing the approaching tram) and side impact (dummy standing with its shoulder towards the tram). The crash tests were conducted with four different types of tram, typical for the Prague's public transportation, and at four different impact speeds (5, 10, 15, 20 km/h). The primary outcome variable was the resultant head acceleration. The risk and severity of possible head injuries were analysed using the head injury criterion (HIC15) and the corresponding level of injury on the Abbreviated Injury Scale (AIS). The results of kinematic analysis showed that during the primary impact, the head of dummy always got hit by trams' front ends in the case of frontal impact while in the case of side impact, the head got only hit at higher speeds (15 and 20 km/h) with modern tram types. The results of dynamic analysis showed an increasing trend of head impacts with higher speeds for all tram types and collision scenarios. However, the head acceleration was higher in the case of frontal impacts compared to side impacts. The HIC15 did not exceed the value of 300 in any case and the probability of AIS3+ did not exceed 10%. The results suggest that the outcomes of tram-pedestrian collisions can be influenced by the tram type (its front-end design), impact speed, collision scenario, and the site of initial contact.
- 5 July 2023
- Published by Jan Evangelista Purkyne University in Usti nad Labem in Manufacturing Technology
- Vol. 23 (3) , 298-306
Open AccessThe Biomechanics of Head Injuries during Tram-Pedestrian Accidents
The goal of the study was to analyse the kinematic and dynamic response of the human head during the primary impact of tram-pedestrian collisions. The anthropomorphic test device (dummy) was used for two collision scenarios: the frontal (dummy facing the approaching tram) and side impact (dummy standing with its shoulder towards the tram). The crash tests were conducted with four different types of tram, typical for the Prague's public transportation, and at four different impact speeds (5, 10, 15, 20 km/h). The primary outcome variable was the resultant head acceleration. The risk and severity of possible head injuries were analysed using the head injury criterion (HIC15) and the corresponding level of injury on the Abbreviated Injury Scale (AIS). The results of kinematic analysis showed that during the primary impact, the head of dummy always got hit by trams' front ends in the case of frontal impact while in the case of side impact, the head got only hit at higher speeds (15 and 20 km/h) with modern tram types. The results of dynamic analysis showed an increasing trend of head impacts with higher speeds for all tram types and collision scenarios. However, the head acceleration was higher in the case of frontal impacts compared to side impacts. The HIC15 did not exceed the value of 300 in any case and the probability of AIS3+ did not exceed 10%. The results suggest that the outcomes of tram-pedestrian collisions can be influenced by the tram type (its front-end design), impact speed, collision scenario, and the site of initial contact.