Rosdiana Rosdiana
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rosdiana Rosdiana has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Selamat Meliala
Universitas Malikussaleh
5 shared publications - Dedi Satria
Universitas Serambi Mekkah
3 shared publications - Saifuddin Muhammad Jalil
Universitas Malikussaleh
3 shared publications - Arnawan Hasibuan
Malikussaleh University
1 shared publication Arya Wiyangga Pradana
Universitas Malikussaleh
1 shared publicationAsri
Universitas Malikussaleh
1 shared publication
Latest Publications
- Open Access
- 29 July 2026
- Published by Universitas Islam Sumatera Utara in JET (Journal of Electrical Technology)
- Vol. 11 (2) , 57-66
Analisis Eksperimental Pengaruh Plat Konduktor terhadap Kinerja Thermoelectric Generator Berbasis Limbah Panas
Pemanfaatan energi alternatif menjadi salah satu upaya penting dalam meningkatkan efisiensi energi dan mengurangi ketergantungan terhadap sumber energi konvensional. Salah satu potensi energi yang belum dimanfaatkan secara optimal adalah panas buangan dari peralatan, mesin, maupun proses industri. Penelitian ini membahas pemanfaatan panas buangan sebagai sumber energi listrik melalui sistem Thermoelectric Generator (TEG). TEG bekerja berdasarkan perbedaan temperatur antara sisi panas dan sisi dingin modul yang menghasilkan tegangan listrik melalui efek Seebeck. Fokus penelitian ini adalah menganalisis pengaruh jenis pelat konduktor terhadap kinerja TEG. Material pelat yang diuji meliputi tembaga, aluminium, dan stainless steel. Pengujian dilakukan menggunakan dua modul TEC1-12706 sebagai sumber panas dan satu modul TEG SP1848 sebagai penghasil listrik. Parameter yang diamati meliputi perbedaan suhu, tegangan, arus, daya keluaran, dan efisiensi konversi energi. Hasil pengujian menunjukkan bahwa tembaga menghasilkan ΔT tertinggi sebesar 63,8 °C, namun efisiensinya paling rendah. Aluminium menunjukkan kinerja yang lebih stabil dengan ΔT sebesar 62,4 °C dan arus tertinggi 2,0 µA. Stainless steel menghasilkan ΔT sebesar 62,2 °C, tetapi memiliki efisiensi konversi tertinggi serta respons termal paling cepat. Hasil ini menunjukkan bahwa kinerja TEG tidak hanya ditentukan oleh besar ΔT, tetapi juga dipengaruhi oleh kestabilan distribusi panas dan karakteristik termal material pelat konduktor
- 29 July 2026
- Published by Universitas Islam Sumatera Utara in JET (Journal of Electrical Technology)
- Vol. 11 (2) , 57-66
Open AccessAnalisis Eksperimental Pengaruh Plat Konduktor terhadap Kinerja Thermoelectric Generator Berbasis Limbah Panas
Pemanfaatan energi alternatif menjadi salah satu upaya penting dalam meningkatkan efisiensi energi dan mengurangi ketergantungan terhadap sumber energi konvensional. Salah satu potensi energi yang belum dimanfaatkan secara optimal adalah panas buangan dari peralatan, mesin, maupun proses industri. Penelitian ini membahas pemanfaatan panas buangan sebagai sumber energi listrik melalui sistem Thermoelectric Generator (TEG). TEG bekerja berdasarkan perbedaan temperatur antara sisi panas dan sisi dingin modul yang menghasilkan tegangan listrik melalui efek Seebeck. Fokus penelitian ini adalah menganalisis pengaruh jenis pelat konduktor terhadap kinerja TEG. Material pelat yang diuji meliputi tembaga, aluminium, dan stainless steel. Pengujian dilakukan menggunakan dua modul TEC1-12706 sebagai sumber panas dan satu modul TEG SP1848 sebagai penghasil listrik. Parameter yang diamati meliputi perbedaan suhu, tegangan, arus, daya keluaran, dan efisiensi konversi energi. Hasil pengujian menunjukkan bahwa tembaga menghasilkan ΔT tertinggi sebesar 63,8 °C, namun efisiensinya paling rendah. Aluminium menunjukkan kinerja yang lebih stabil dengan ΔT sebesar 62,4 °C dan arus tertinggi 2,0 µA. Stainless steel menghasilkan ΔT sebesar 62,2 °C, tetapi memiliki efisiensi konversi tertinggi serta respons termal paling cepat. Hasil ini menunjukkan bahwa kinerja TEG tidak hanya ditentukan oleh besar ΔT, tetapi juga dipengaruhi oleh kestabilan distribusi panas dan karakteristik termal material pelat konduktor
- Open Access
- 15 February 2025
- Published by Yayasan Kita Menulis in Journal of Artificial Intelligence and Engineering Applications (JAIEA)
- Vol. 4 (2) , 1417-1426
Design of Gelugur Acid (Garnicia Antroviridis) Dryer Using ESP32 Based on Internet of Things (IoT)
This research aims to design a system for gelugur tamarind dryer and test gelugur tamarind dryer using ESP32 microcontroller. This research uses an experimental method by using ESP32 as a data processing tool given by the DHT22 temperature sensor, then designing temperature and time controls, as well as designing mechanical and electronic devices for the gelugur tamarind dryer. Gelugur acid is dried to be used as a mixture of food or spices. In this tool, the temperature for drying can be adjusted as desired, each temperature set then gets different results. In this drying process is done for hours, in order to get optimal results. The results showed that the original weight of 500 grams of gelugur acid had been dried and sampled within 4 hours with a temperature of 60ºC that had been programmed, and when dry the weight of the acid was reduced to 140 grams if the percentage was 28%. The conclusion that the longer the drying, the less the weight of the acid that was originally wet. The presence of a temperature and time control system shows that this dryer can dry various raw materials, not limited to gelugur acid.
- 15 February 2025
- Published by Yayasan Kita Menulis in Journal of Artificial Intelligence and Engineering Applications (JAIEA)
- Vol. 4 (2) , 1417-1426
Open AccessDesign of Gelugur Acid (Garnicia Antroviridis) Dryer Using ESP32 Based on Internet of Things (IoT)
This research aims to design a system for gelugur tamarind dryer and test gelugur tamarind dryer using ESP32 microcontroller. This research uses an experimental method by using ESP32 as a data processing tool given by the DHT22 temperature sensor, then designing temperature and time controls, as well as designing mechanical and electronic devices for the gelugur tamarind dryer. Gelugur acid is dried to be used as a mixture of food or spices. In this tool, the temperature for drying can be adjusted as desired, each temperature set then gets different results. In this drying process is done for hours, in order to get optimal results. The results showed that the original weight of 500 grams of gelugur acid had been dried and sampled within 4 hours with a temperature of 60ºC that had been programmed, and when dry the weight of the acid was reduced to 140 grams if the percentage was 28%. The conclusion that the longer the drying, the less the weight of the acid that was originally wet. The presence of a temperature and time control system shows that this dryer can dry various raw materials, not limited to gelugur acid.
- Open Access
- 1 December 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 14 (6) , 7158-7168
Control and monitoring of 1 phase generator automatic voltage regulator internet of things
This research focuses on the importance of maintaining generator output voltage stabilization using automatic voltage regulator (AVR), especially in dealing with load impacts and environmental changes. Through the implementation of internet of things (IoT), this system can be controlled and monitored remotely, enabling real-time monitoring without physical presence at the generator location. The main objective of this research is to increase energy efficiency by optimizing generator operation. System development methods include design, prototyping and testing stages. Test results show that the automatic voltage regulator is effective in maintaining a stable output voltage of around 220 V, even though the current varies according to the existing load. The power produced ranges from 23 to 670 W, with a power factor between 0.7 and 1. Despite a slight voltage drop to 217 V, the power factor increases to 0.93. The system uses NodeMCU to send data to Blynk and Google Spreadsheets servers, as well as servo motors and PZEM-004T sensors for control and monitoring. Overall, this research shows that the internet of things-based automatic voltage regulator system is effective in maintaining stability and increasing generator operational efficiency, with the ability to manage voltage, current, power, and power factor efficiently.
- 1 December 2024
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 14 (6) , 7158-7168
Open AccessControl and monitoring of 1 phase generator automatic voltage regulator internet of things
This research focuses on the importance of maintaining generator output voltage stabilization using automatic voltage regulator (AVR), especially in dealing with load impacts and environmental changes. Through the implementation of internet of things (IoT), this system can be controlled and monitored remotely, enabling real-time monitoring without physical presence at the generator location. The main objective of this research is to increase energy efficiency by optimizing generator operation. System development methods include design, prototyping and testing stages. Test results show that the automatic voltage regulator is effective in maintaining a stable output voltage of around 220 V, even though the current varies according to the existing load. The power produced ranges from 23 to 670 W, with a power factor between 0.7 and 1. Despite a slight voltage drop to 217 V, the power factor increases to 0.93. The system uses NodeMCU to send data to Blynk and Google Spreadsheets servers, as well as servo motors and PZEM-004T sensors for control and monitoring. Overall, this research shows that the internet of things-based automatic voltage regulator system is effective in maintaining stability and increasing generator operational efficiency, with the ability to manage voltage, current, power, and power factor efficiently.
- Open Access
- 13 April 2023
- Published by Universitas Mulia in Multica Science and Technology (MST)
- Vol. 3 (1) , 161-168
LAMP MODIFICATION FROM HPLN TO LED TECHNOLOGY FOR SAVING ELECTRICAL ENERGY IN STREET LIGHTING
Energy Efficiency is a business that is carried out with the aim of reducing the amount of energy needed, in using an equipment or even an energy-related system. In its development in the field of lighting, LED (Light Emitting Diode) lamps are now starting to be used as lighting lamps for homes, industries and factories. In Indonesia, the use of LED lamps in lighting is still rarely used, because the price of LED lamps is quite expensive when compared to ordinary lamps. With the saving of electric power through the use of LED lights, the problem of operational costs will be easy to overcome. Indeed, the price of this LED lamp is a little expensive, but with the research on the comparison of the use of this LED lamp with HPL-N type lamps, the industry will consider using this LED lamp with a generally accepted application method to reduce energy expenditure. The previous conditions for Jalan Dolok Merawan used HPLN 250 Watt lamps with a handlebar angle of 24,920 ornaments, the resulting light intensity was 2189 Candela, the intensity of the resulting lighting was 97.94 Lux and has now been changed to make it more optimal to use 120 Watt LED type lights, the height of the pole used is 4 meterss with an ornament handlebar angle of 24.920, light intensity of 1242 Candella, lighting intensity of 55.33 lux. The results of this illumination intensity are in accordance with the standard determined by BSN SNI regarding Collector road class 3-7 Lux. The results achieved after the process of modifying HPL-N lamps to LEDs are that they can reduce the use of electrical energy in the lighting system and achieve efficiency for electric power consumption so that they can provide added value to the company in reducing the company's operational costs.
- 13 April 2023
- Published by Universitas Mulia in Multica Science and Technology (MST)
- Vol. 3 (1) , 161-168
Open AccessLAMP MODIFICATION FROM HPLN TO LED TECHNOLOGY FOR SAVING ELECTRICAL ENERGY IN STREET LIGHTING
Energy Efficiency is a business that is carried out with the aim of reducing the amount of energy needed, in using an equipment or even an energy-related system. In its development in the field of lighting, LED (Light Emitting Diode) lamps are now starting to be used as lighting lamps for homes, industries and factories. In Indonesia, the use of LED lamps in lighting is still rarely used, because the price of LED lamps is quite expensive when compared to ordinary lamps. With the saving of electric power through the use of LED lights, the problem of operational costs will be easy to overcome. Indeed, the price of this LED lamp is a little expensive, but with the research on the comparison of the use of this LED lamp with HPL-N type lamps, the industry will consider using this LED lamp with a generally accepted application method to reduce energy expenditure. The previous conditions for Jalan Dolok Merawan used HPLN 250 Watt lamps with a handlebar angle of 24,920 ornaments, the resulting light intensity was 2189 Candela, the intensity of the resulting lighting was 97.94 Lux and has now been changed to make it more optimal to use 120 Watt LED type lights, the height of the pole used is 4 meterss with an ornament handlebar angle of 24.920, light intensity of 1242 Candella, lighting intensity of 55.33 lux. The results of this illumination intensity are in accordance with the standard determined by BSN SNI regarding Collector road class 3-7 Lux. The results achieved after the process of modifying HPL-N lamps to LEDs are that they can reduce the use of electrical energy in the lighting system and achieve efficiency for electric power consumption so that they can provide added value to the company in reducing the company's operational costs.
- Open Access
- 9 February 2023
- Published by Universitas Muhammadiyah Buton in Sang Pencerah: Jurnal Ilmiah Universitas Muhammadiyah Buton
- Vol. 9 (1) , 184-191
Analisa Deteksi Tingkat Kualitas Minyak Pada Buah Sawit Berdasarkan Tingkat Kematangan Warna Buah Menggunakan Drone Berbasis Pengolahan Citra Di PTPN Membang Muda Sumut
Dalam penelitian ini, pengolahan citra digital digunakan di bidang pertanian untuk menganalisis tandan buah sawit untuk menentukan kematangannya, khususnya dengan mengidentifikasi atau mengkategorikan Tandan Buah Segar (TBS) dan Tandan Buah Mentah (TBM) berdasarkan teknologi. Citra Tandan Buah Segar (TBS) dan Tandan Buah Mentah (TBM) digunakan dalam penelitian ini. Segmentasi gambar latar belakang dihapus dari citra selama preprocessing dengan menetapkan nilai ambang saturasi 0,2 hingga 0,7, yang akan mengekstraksi fitur RGB. Pada penelitan ini algoritma klasifikasi yang akan digunakan yaitu Jaringan Saraf Tiruan (JST) Backpropagation dan Learning Vektor Quantization (SOM). Hasil matriks ekstrak ciri RGB dipakai sebagai input Jaringan Saraf Tiruan backpropagation dan SOM. Dengan analisis Receiver Operating Characteristic (ROC) hasil penelitian dengan pengujian 20 TBS dan 20 TBM diperoleh tingkat precision =100%, accuracy=100%, sensitivity =100%, dan specificity=100% dengan metode klasifikasi backpropagation dengan threshold saturation 0,4 dan diperoleh hasil precision=95%, accuracy =98%, sensitivity =100%, dan specificity=95% dengan metode klasifikasi SOM dengan threshold saturation 0,4.
- 9 February 2023
- Published by Universitas Muhammadiyah Buton in Sang Pencerah: Jurnal Ilmiah Universitas Muhammadiyah Buton
- Vol. 9 (1) , 184-191
Open AccessAnalisa Deteksi Tingkat Kualitas Minyak Pada Buah Sawit Berdasarkan Tingkat Kematangan Warna Buah Menggunakan Drone Berbasis Pengolahan Citra Di PTPN Membang Muda Sumut
Dalam penelitian ini, pengolahan citra digital digunakan di bidang pertanian untuk menganalisis tandan buah sawit untuk menentukan kematangannya, khususnya dengan mengidentifikasi atau mengkategorikan Tandan Buah Segar (TBS) dan Tandan Buah Mentah (TBM) berdasarkan teknologi. Citra Tandan Buah Segar (TBS) dan Tandan Buah Mentah (TBM) digunakan dalam penelitian ini. Segmentasi gambar latar belakang dihapus dari citra selama preprocessing dengan menetapkan nilai ambang saturasi 0,2 hingga 0,7, yang akan mengekstraksi fitur RGB. Pada penelitan ini algoritma klasifikasi yang akan digunakan yaitu Jaringan Saraf Tiruan (JST) Backpropagation dan Learning Vektor Quantization (SOM). Hasil matriks ekstrak ciri RGB dipakai sebagai input Jaringan Saraf Tiruan backpropagation dan SOM. Dengan analisis Receiver Operating Characteristic (ROC) hasil penelitian dengan pengujian 20 TBS dan 20 TBM diperoleh tingkat precision =100%, accuracy=100%, sensitivity =100%, dan specificity=100% dengan metode klasifikasi backpropagation dengan threshold saturation 0,4 dan diperoleh hasil precision=95%, accuracy =98%, sensitivity =100%, dan specificity=95% dengan metode klasifikasi SOM dengan threshold saturation 0,4.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2431 (1)
Implementation of information systems using SMS gateway on an automatic garden watering system
Plantation in achieving optimal results cannot be separated from the factor of sufficient water availability. Water is a basic resource that is always maintained for a farmer in obtaining maximum and quality results. Farmers as people who manage agricultural land also need technology to increase their agricultural output. One of the important technologies in water problems is the process of watering plants which can be done automatically according to the soil conditions in the plantation. Based on the importance of an automatic garden watering system, this article presents the results of research on the design of an automatic garden watering system that is integrated with an SMS gateway-based notification system. This garden watering system prototype was built using a soil moisture sensor as an input component, an Arduino Mega microcontroller as a processing component, and a relay component as a power source bridge and an electric water pump as an output component, and a GSM module as an output component. From the results of testing the system as a whole, it is found that when the soil moisture is 976 RH and 863 RH, the soil condition is dry, so that the watering decision is active and is followed by the SMS status is sent. From the results of these tests, in general this system has succeeded in making watering in dry soil conditions and providing information to farmers via SMS regarding the watering process that has been carried out by the system.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2431 (1)
Open AccessImplementation of information systems using SMS gateway on an automatic garden watering system
Plantation in achieving optimal results cannot be separated from the factor of sufficient water availability. Water is a basic resource that is always maintained for a farmer in obtaining maximum and quality results. Farmers as people who manage agricultural land also need technology to increase their agricultural output. One of the important technologies in water problems is the process of watering plants which can be done automatically according to the soil conditions in the plantation. Based on the importance of an automatic garden watering system, this article presents the results of research on the design of an automatic garden watering system that is integrated with an SMS gateway-based notification system. This garden watering system prototype was built using a soil moisture sensor as an input component, an Arduino Mega microcontroller as a processing component, and a relay component as a power source bridge and an electric water pump as an output component, and a GSM module as an output component. From the results of testing the system as a whole, it is found that when the soil moisture is 976 RH and 863 RH, the soil condition is dry, so that the watering decision is active and is followed by the SMS status is sent. From the results of these tests, in general this system has succeeded in making watering in dry soil conditions and providing information to farmers via SMS regarding the watering process that has been carried out by the system.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2431 (1)
Implementation of wireless sensor network communication system in fire monitoring information system
Fire is one of the national disaster categories that has been determined by the government. Currently fires often occur in cities, densely populated areas and apartment buildings. Fires are often associated with electricity, kitchen problems and natural disasters. However, the main causes that often occur are always connected to electricity and the kitchen. Firefighters are often rumored to always arrive not on time. Therefore, it is necessary to have a fire detector system that can send notifications and information to firefighters in real-time from the source of the initial fire. Based on these problems, this article aims to present the results of research on the design of a wireless sensor network communication system implementation model in an apartment building fire monitoring system. The research method uses the Software Development Life Cycle (SDLC) model and the materials used for the client prototype are a temperature sensor, fire sensor, ATMEGA2560 microcontroller and a wireless shield module. While the materials on the server prototype are Apache Web Server, PHP Engine and MySQL server. This research produces a client system that sends data on temperature, fire and apartment address to the server system via a wireless communication system that uses the concept of a wireless sensor network. Fire monitoring results are displayed in the form of a web application and real-time data updates.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2431 (1)
Open AccessImplementation of wireless sensor network communication system in fire monitoring information system
Fire is one of the national disaster categories that has been determined by the government. Currently fires often occur in cities, densely populated areas and apartment buildings. Fires are often associated with electricity, kitchen problems and natural disasters. However, the main causes that often occur are always connected to electricity and the kitchen. Firefighters are often rumored to always arrive not on time. Therefore, it is necessary to have a fire detector system that can send notifications and information to firefighters in real-time from the source of the initial fire. Based on these problems, this article aims to present the results of research on the design of a wireless sensor network communication system implementation model in an apartment building fire monitoring system. The research method uses the Software Development Life Cycle (SDLC) model and the materials used for the client prototype are a temperature sensor, fire sensor, ATMEGA2560 microcontroller and a wireless shield module. While the materials on the server prototype are Apache Web Server, PHP Engine and MySQL server. This research produces a client system that sends data on temperature, fire and apartment address to the server system via a wireless communication system that uses the concept of a wireless sensor network. Fire monitoring results are displayed in the form of a web application and real-time data updates.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2431 (1)
Garbage container status notification system with GSM wireless mobile communication system
The current condition of waste production has become a global problem for cleaning agencies in various cities. The problems faced are the increase in waste production and the lack of transportation for transporting waste. Based on these problems, a short-term solution is needed in the form of a waste container status information system that can provide the latest information on the location of full waste containers so that they can provide input to waste transportation officers to make optimal waste transportation priority. This study aims to design and build a waste container status notification system prototype with a GSM wireless mobile communication system. The prototype was built using an ultrasonic sensor as an input component, an Arduino Uno microcontroller as a processing component and a GSM module as an output component. System testing is carried out using a garbage container construction with a height of 30cm. Tests were carried out by simulating the heights of trash at 10cm, 13cm, 17cm, 21cm and 24cm with the results of undelivered SMS. at a height of 27cm, the SMS status shows the result sent with the time that the user received is 4 seconds. In general, the prototype has successfully sent SMS to the user in the preconfigured conditions.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2431 (1)
Open AccessGarbage container status notification system with GSM wireless mobile communication system
The current condition of waste production has become a global problem for cleaning agencies in various cities. The problems faced are the increase in waste production and the lack of transportation for transporting waste. Based on these problems, a short-term solution is needed in the form of a waste container status information system that can provide the latest information on the location of full waste containers so that they can provide input to waste transportation officers to make optimal waste transportation priority. This study aims to design and build a waste container status notification system prototype with a GSM wireless mobile communication system. The prototype was built using an ultrasonic sensor as an input component, an Arduino Uno microcontroller as a processing component and a GSM module as an output component. System testing is carried out using a garbage container construction with a height of 30cm. Tests were carried out by simulating the heights of trash at 10cm, 13cm, 17cm, 21cm and 24cm with the results of undelivered SMS. at a height of 27cm, the SMS status shows the result sent with the time that the user received is 4 seconds. In general, the prototype has successfully sent SMS to the user in the preconfigured conditions.