Andrii Glebov
Research Subjects
Andrii Glebov has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Sergey V. Prokunin
Russian Metrological Institute of Technical Physics and Radio Engineering
2 shared publications - Vladimir I. Dobrovolskiy
Russian Metrological Institute of Technical Physics and Radio Engineering
2 shared publications A. N. Shchipunov
Russian Metrological Institute of Technical Physics and Radio Engineering
1 shared publication- A. N. Shchipunov
Russian Metrological Institute of Technical Physics and Radio Engineering, Mendeleevo, Russian Federation
1 shared publication Olga Dengub
State Enterprise «All-Ukrainian State Research and Production Center for Standardization, Metrology, Certification and Consumers’ Rights Protection», Kyiv, Ukraine
1 shared publicationT. E. Alimova
Russian Metrological Institute of Technical Physics and Radio Engineering
1 shared publication
Latest Publications
- 13 January 2025
- Published by Federal Budgetary Institution "Research Center for Applied Metrology - Rostest" in Izmeritel`naya Tekhnika
- Vol. 73 (12) , 63-70
Experimental implementation of a measuring electrode for determining the hydrogen index in strongly acidic environments
The work is aimed at finding ways to solve the issue of metrological support for measurements of the hydrogen index pH in a highly acidic environment, which requires the presence of corrosion-resistant measuring electrodes with a stable potential, and for use in medical purposes – with an additional requirement – the absence of toxic substances on the working surface of the electrodes. Non-toxic and relatively corrosion-resistant metallic bismuth with the addition of modified graphite was chosen as the material for the electrode production. Optimal ratios of the main substance of the electrode (bismuth) and the modifying additive (graphite) have been selected, a binding solution has been proposed to increase the degree of homogeneity of the working surface of the electrode, and a method for manufacturing measuring electrodes has been described. An experimental setup has been developed to measure the potential of the manufactured electrodes relative to the potential of a normal hydrogen electrode. The setup includes a set of technical means, including a hydrogen generator, a hydrogen electrode used under standard conditions, acting as an anode, and a measuring electrode acting as a cathode, which was made up of various electrodes manufactured within the framework of this work. Electrode functions have been constructed for antimony and bismuth electrodes of different modifications. The results of measuring the potential of the manufactured bismuth and antimony electrodes, which are used as pH probes in medical equipment, have been compared. The results of studies of the influence of carbon additive on the electrode potential of measuring electrodes and their corrosion resistance are presented. Ways of further studies are proposed to optimize the composition of the working surface of electrodes for use in a strongly acidic environment.
- 13 January 2025
- Published by Federal Budgetary Institution "Research Center for Applied Metrology - Rostest" in Izmeritel`naya Tekhnika
- Vol. 73 (12) , 63-70
Experimental implementation of a measuring electrode for determining the hydrogen index in strongly acidic environments
The work is aimed at finding ways to solve the issue of metrological support for measurements of the hydrogen index pH in a highly acidic environment, which requires the presence of corrosion-resistant measuring electrodes with a stable potential, and for use in medical purposes – with an additional requirement – the absence of toxic substances on the working surface of the electrodes. Non-toxic and relatively corrosion-resistant metallic bismuth with the addition of modified graphite was chosen as the material for the electrode production. Optimal ratios of the main substance of the electrode (bismuth) and the modifying additive (graphite) have been selected, a binding solution has been proposed to increase the degree of homogeneity of the working surface of the electrode, and a method for manufacturing measuring electrodes has been described. An experimental setup has been developed to measure the potential of the manufactured electrodes relative to the potential of a normal hydrogen electrode. The setup includes a set of technical means, including a hydrogen generator, a hydrogen electrode used under standard conditions, acting as an anode, and a measuring electrode acting as a cathode, which was made up of various electrodes manufactured within the framework of this work. Electrode functions have been constructed for antimony and bismuth electrodes of different modifications. The results of measuring the potential of the manufactured bismuth and antimony electrodes, which are used as pH probes in medical equipment, have been compared. The results of studies of the influence of carbon additive on the electrode potential of measuring electrodes and their corrosion resistance are presented. Ways of further studies are proposed to optimize the composition of the working surface of electrodes for use in a strongly acidic environment.
- Open Access
- 5 May 2023
- Published by SE Ukrmetrteststandart in Measurements infrastructure
- Vol. 5
The interlaboratory comparisons role in the Ukrainian metrology system functioning
It is considered the usage of interlaboratory comparisons for the assuring of national metrology system functioning in the part of national measurement standards recognition (international standards comparisons), development and support the system of the units dissemination (the measurements methods evaluation and reference materials certification by interlaboratory experiment) and the calibration, testing and medical laboratories competence confirmation while their accreditation (proficiency testing). The information on valid European Proficiency Testing System EPTIS is presented. The programs for different types of laboratory studies are considered. The approaches to participants functioning evaluation are presented for the proficiency testing while calibration programs. The recommendations by international documents concerning laboratory activities monitoring reliability are presented. Розглянуто питання застосування міжлабораторних звірень для забезпечення функціонування національної метрологічної системи в частині міжнародного визнання національних еталонів (міжнародні звірення еталонів), створення та підтримки системи передачі розмірів одиниць вимірювань (оцінка характеристик методик вимірювань та сертифікація стандартних зразків методом міжлабораторного експерименту), підтвердження компетентності калібрувальних, випробувальних та медичних лабораторій під час їх акредитації (перевірка кваліфікації). Надано інформацію про діючу європейську інформаційну систему з перевірок кваліфікації EPTIS. Розглянуто програми перевірки кваліфікації, що різняться за типом лабораторних досліджень. Запропоновано підходи до оцінки характеристик функціонування учасників для програм перевірки кваліфікації при калібруванні. Наведено рекомендації міжнародних документів щодо моніторингу достовірності результатів діяльності лабораторії.
- 5 May 2023
- Published by SE Ukrmetrteststandart in Measurements infrastructure
- Vol. 5
Open AccessThe interlaboratory comparisons role in the Ukrainian metrology system functioning
It is considered the usage of interlaboratory comparisons for the assuring of national metrology system functioning in the part of national measurement standards recognition (international standards comparisons), development and support the system of the units dissemination (the measurements methods evaluation and reference materials certification by interlaboratory experiment) and the calibration, testing and medical laboratories competence confirmation while their accreditation (proficiency testing). The information on valid European Proficiency Testing System EPTIS is presented. The programs for different types of laboratory studies are considered. The approaches to participants functioning evaluation are presented for the proficiency testing while calibration programs. The recommendations by international documents concerning laboratory activities monitoring reliability are presented. Розглянуто питання застосування міжлабораторних звірень для забезпечення функціонування національної метрологічної системи в частині міжнародного визнання національних еталонів (міжнародні звірення еталонів), створення та підтримки системи передачі розмірів одиниць вимірювань (оцінка характеристик методик вимірювань та сертифікація стандартних зразків методом міжлабораторного експерименту), підтвердження компетентності калібрувальних, випробувальних та медичних лабораторій під час їх акредитації (перевірка кваліфікації). Надано інформацію про діючу європейську інформаційну систему з перевірок кваліфікації EPTIS. Розглянуто програми перевірки кваліфікації, що різняться за типом лабораторних досліджень. Запропоновано підходи до оцінки характеристик функціонування учасників для програм перевірки кваліфікації при калібруванні. Наведено рекомендації міжнародних документів щодо моніторингу достовірності результатів діяльності лабораторії.