Yaoju Tarn
Yaoju Tarn has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Yijun Yu
SLAC National Accelerator Laboratory
5 shared publications - Harold Y. Hwang
SLAC National Accelerator Laboratory
3 shared publications - Lopa Bhatt
School of Applied and Engineering Physics, Cornell University, Ithaca, USA
3 shared publications Vivek Thampy
Stanford Synchrotron Radiation Lightsource SLAC National Accelerator Laboratory Menlo Park California USA
3 shared publications- Yidi Liu
Stanford Institute for Materials and Energy Sciences, SLAC National Accelerator Laboratory, Menlo Park, USA
3 shared publications Berit H. Goodge
Max Planck Institute for Chemical Physics of Solids
2 shared publications
Latest Publications
- 12 September 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (37) , 12409-12416
Superconducting Weak Links at Substrate Steps in Bilayer Nickelate Films
Ambient-pressure superconductivity above 40 K has been realized in bilayer nickelate thin films on SrLaAlO4 (001), yet resistive measurements often exhibit incomplete zero-resistance states and/or two-step superconducting transitions of unresolved origin. We show that these features arise from superconducting weak links at substrate step-terrace structures. A direct correlation between the azimuthal-angle-dependent two-step transition and step-terrace orientation establishes this connection, further supported by atomic-scale visualization of structurally disrupted regions at step terraces. Modeling the films as pristine (weak-link) regions with higher (lower) transition temperature reproduces essential features of the two-step transition using both a simple model and finite-element simulations. Transport measurements further reveal a strong dependence of transition characteristics (and even the occurrence of superconductivity itself) on average terrace width. These results identify step-induced weak links as the microscopic origin of two-step transitions in bilayer nickelate films, providing a framework for understanding anisotropic and percolative transport, and a route to superconducting devices.
- 12 September 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (37) , 12409-12416
Superconducting Weak Links at Substrate Steps in Bilayer Nickelate Films
Ambient-pressure superconductivity above 40 K has been realized in bilayer nickelate thin films on SrLaAlO4 (001), yet resistive measurements often exhibit incomplete zero-resistance states and/or two-step superconducting transitions of unresolved origin. We show that these features arise from superconducting weak links at substrate step-terrace structures. A direct correlation between the azimuthal-angle-dependent two-step transition and step-terrace orientation establishes this connection, further supported by atomic-scale visualization of structurally disrupted regions at step terraces. Modeling the films as pristine (weak-link) regions with higher (lower) transition temperature reproduces essential features of the two-step transition using both a simple model and finite-element simulations. Transport measurements further reveal a strong dependence of transition characteristics (and even the occurrence of superconductivity itself) on average terrace width. These results identify step-induced weak links as the microscopic origin of two-step transitions in bilayer nickelate films, providing a framework for understanding anisotropic and percolative transport, and a route to superconducting devices.
- Open Access
- 20 August 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (34)
What controls the superconducting dome of electron-doped FeSe?
Superconducting domes are conspicuous features of the phase diagrams of most unconventional and high-temperature superconductors. The superconducting transition temperature ( T c ) of FeSe can be dramatically enhanced with electron doping, but unlike all other high-temperature and unconventional superconductors, its full phase diagram and superconducting dome has yet to be fully explored. Here, we employ a combination of molecular beam epitaxy synthesis, alkali surface doping, in-vacuum electrical transport, and angle-resolved photoemission spectroscopy to investigate the entire superconducting dome of electron-doped FeSe, achieving a fully metallic state where superconductivity is suppressed in the heavily overdoped regime. We identify a robust scaling between T c and the residual resistivity (ρ 0 ) which holds across the entire superconducting dome, suggesting that the evolution of T c is heavily influenced by the evolution of the elastic scattering rate in the high- T c electron-doped phase. This in turn suggests that the superconducting dome in electron-doped FeSe appears to be fundamentally different than that of other unconventional superconductors where doping plays the primary role, and may instead be driven primarily by the sensitivity of the superconductivity to disorder.
- 20 August 2026
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 123 (34)
Open AccessWhat controls the superconducting dome of electron-doped FeSe?
Superconducting domes are conspicuous features of the phase diagrams of most unconventional and high-temperature superconductors. The superconducting transition temperature ( T c ) of FeSe can be dramatically enhanced with electron doping, but unlike all other high-temperature and unconventional superconductors, its full phase diagram and superconducting dome has yet to be fully explored. Here, we employ a combination of molecular beam epitaxy synthesis, alkali surface doping, in-vacuum electrical transport, and angle-resolved photoemission spectroscopy to investigate the entire superconducting dome of electron-doped FeSe, achieving a fully metallic state where superconductivity is suppressed in the heavily overdoped regime. We identify a robust scaling between T c and the residual resistivity (ρ 0 ) which holds across the entire superconducting dome, suggesting that the evolution of T c is heavily influenced by the evolution of the elastic scattering rate in the high- T c electron-doped phase. This in turn suggests that the superconducting dome in electron-doped FeSe appears to be fundamentally different than that of other unconventional superconductors where doping plays the primary role, and may instead be driven primarily by the sensitivity of the superconductivity to disorder.
- Top Cited PapersOpen Access
- 10 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Fermi-liquid transport beyond the upper critical field in superconducting La2PrNi2O7 thin films
Unconventional superconductivity typically emerges out of a strongly correlated normal state, manifesting as a highly renormalised Fermi liquid or a strange metal with T-linear resistivity. In Ruddlesden-Popper bilayer nickelates, superconductivity with a critical temperature Tc exceeding 80 and 40 K has been respectively realised in pressurised bulk crystals and epitaxially strained thin films. These advancements call for the characterisation of fundamental normal-state and superconducting parameters in these new materials platforms of high-Tc superconductivity. Here we report detailed magnetotransport experiments on superconducting La2PrNi2O7 (LPNO) thin films under pulsed magnetic fields up to 64 T and access the normal-state behaviour over a wide temperature range between 1.5 and 300 K. We find that the normal state of thin-film LPNO exhibits the hallmarks of Fermi-liquid transport, including T2 temperature dependence of resistivity and Hall angle, and H2 magnetoresistance obeying Kohler scaling. Using the empirical Kadowaki-Woods ratio, we estimate a quasiparticle effective mass m*/me ≃ 10, thereby revealing the highly renormalised Fermi liquid state therein. Our results demonstrate that thin-film LPNO follows the same Tc/TF scaling observed across a myriad of strongly correlated superconductors and establish key normal-state characteristics of strained bilayer superconducting nickelates.
- 10 March 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Top Cited PapersOpen AccessFermi-liquid transport beyond the upper critical field in superconducting La2PrNi2O7 thin films
Unconventional superconductivity typically emerges out of a strongly correlated normal state, manifesting as a highly renormalised Fermi liquid or a strange metal with T-linear resistivity. In Ruddlesden-Popper bilayer nickelates, superconductivity with a critical temperature Tc exceeding 80 and 40 K has been respectively realised in pressurised bulk crystals and epitaxially strained thin films. These advancements call for the characterisation of fundamental normal-state and superconducting parameters in these new materials platforms of high-Tc superconductivity. Here we report detailed magnetotransport experiments on superconducting La2PrNi2O7 (LPNO) thin films under pulsed magnetic fields up to 64 T and access the normal-state behaviour over a wide temperature range between 1.5 and 300 K. We find that the normal state of thin-film LPNO exhibits the hallmarks of Fermi-liquid transport, including T2 temperature dependence of resistivity and Hall angle, and H2 magnetoresistance obeying Kohler scaling. Using the empirical Kadowaki-Woods ratio, we estimate a quasiparticle effective mass m*/me ≃ 10, thereby revealing the highly renormalised Fermi liquid state therein. Our results demonstrate that thin-film LPNO follows the same Tc/TF scaling observed across a myriad of strongly correlated superconductors and establish key normal-state characteristics of strained bilayer superconducting nickelates.
- Top Cited Papers
- 12 February 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (16) , e20724
Reducing the Strain Required for Ambient‐Pressure Superconductivity in Ruddlesden‐Popper Bilayer Nickelates
The discovery of high‐temperature superconductivity in pressurized bulk Ruddlesden‐Popper (RP) bilayer nickelates has prompted the conjecture that epitaxial compressive strain might mimic essential aspects of hydrostatic pressure. The realization of superconductivity in films on SrLaAlO 4 (001) (SLAO) supports this correspondence, yet it remains unclear whether the pressure–temperature phase diagram of RP bilayer nickelates can be systematically mapped (and studied at ambient pressure) as a function of epitaxial strain. To this end, experimental access near the elusive edge of the superconducting phase boundary would provide invaluable insight into the nature of the superconducting state and the ground state from which it emerges. Here we report superconducting RP bilayer nickelates grown on LaAlO 3 (001) (LAO), where the compressive strain required for ambient‐pressure superconductivity is nearly halved to −1.2%. These films exhibit a superconducting onset above 10 K and reach zero resistance at 3 K, with normal‐state transport properties differing from those of films grown on SLAO. Our comparative study shows that strain–rather than interfacial structure is the primary factor governing the superconductivity and normal‐state properties. This work offers a new opportunity to probe emergent phenomena near the superconducting phase boundary in the strain–temperature phase diagram of RP bilayer nickelates.
- 12 February 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (16) , e20724
Top Cited PapersReducing the Strain Required for Ambient‐Pressure Superconductivity in Ruddlesden‐Popper Bilayer Nickelates
The discovery of high‐temperature superconductivity in pressurized bulk Ruddlesden‐Popper (RP) bilayer nickelates has prompted the conjecture that epitaxial compressive strain might mimic essential aspects of hydrostatic pressure. The realization of superconductivity in films on SrLaAlO 4 (001) (SLAO) supports this correspondence, yet it remains unclear whether the pressure–temperature phase diagram of RP bilayer nickelates can be systematically mapped (and studied at ambient pressure) as a function of epitaxial strain. To this end, experimental access near the elusive edge of the superconducting phase boundary would provide invaluable insight into the nature of the superconducting state and the ground state from which it emerges. Here we report superconducting RP bilayer nickelates grown on LaAlO 3 (001) (LAO), where the compressive strain required for ambient‐pressure superconductivity is nearly halved to −1.2%. These films exhibit a superconducting onset above 10 K and reach zero resistance at 3 K, with normal‐state transport properties differing from those of films grown on SLAO. Our comparative study shows that strain–rather than interfacial structure is the primary factor governing the superconductivity and normal‐state properties. This work offers a new opportunity to probe emergent phenomena near the superconducting phase boundary in the strain–temperature phase diagram of RP bilayer nickelates.
- Open Access
- 10 October 2025
- Published by Springer Nature in Nature Materials
- Vol. 24 (12) , 2032
Author Correction: Superconductivity and normal-state transport in compressively strained La2PrNi2O7 thin films
- 10 October 2025
- Published by Springer Nature in Nature Materials
- Vol. 24 (12) , 2032
Open AccessAuthor Correction: Superconductivity and normal-state transport in compressively strained La2PrNi2O7 thin films
- Top Cited Papers
- 29 May 2025
- Published by Springer Nature in Nature Materials
- Vol. 24 (8) , 1221-1227
Superconductivity and normal-state transport in compressively strained La2PrNi2O7 thin films
The discovery of superconductivity under high pressure in Ruddlesden–Popper phases of bulk nickelates has sparked great interest in stabilizing ambient-pressure superconductivity in the thin-film form using epitaxial strain. Recently, signs of superconductivity have been observed in compressively strained bilayer nickelate thin films with an onset temperature exceeding 40 K, although with broad, two-step-like transitions. Here we report the intrinsic superconductivity and normal-state transport properties in compressively strained La2PrNi2O7 thin films, achieved through a combination of isovalent Pr substitution, growth optimization and precision ozone annealing. The superconducting onset occurs above 48 K, with zero resistance reached above 30 K, and the critical current density at 1.4 K is 100-fold larger than previous reports. The normal-state resistivity exhibits quadratic temperature dependence indicative of Fermi liquid behaviour, and other phenomenological similarities to transport in overdoped cuprates suggest parallels in their emergent properties.
- 29 May 2025
- Published by Springer Nature in Nature Materials
- Vol. 24 (8) , 1221-1227
Top Cited PapersSuperconductivity and normal-state transport in compressively strained La2PrNi2O7 thin films
The discovery of superconductivity under high pressure in Ruddlesden–Popper phases of bulk nickelates has sparked great interest in stabilizing ambient-pressure superconductivity in the thin-film form using epitaxial strain. Recently, signs of superconductivity have been observed in compressively strained bilayer nickelate thin films with an onset temperature exceeding 40 K, although with broad, two-step-like transitions. Here we report the intrinsic superconductivity and normal-state transport properties in compressively strained La2PrNi2O7 thin films, achieved through a combination of isovalent Pr substitution, growth optimization and precision ozone annealing. The superconducting onset occurs above 48 K, with zero resistance reached above 30 K, and the critical current density at 1.4 K is 100-fold larger than previous reports. The normal-state resistivity exhibits quadratic temperature dependence indicative of Fermi liquid behaviour, and other phenomenological similarities to transport in overdoped cuprates suggest parallels in their emergent properties.