Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuanxu Fu has a total of 3 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mutual Coupling Reduction of a Multiple-Input Multiple-Output Antenna Using an Absorber Wall and a Combline Filter for V2X Communication

    by Yuanxu Fu, Tao Shen, Jiangling Dou

    This paper presents an MIMO antenna for vehicle-to-everything (V2X) communication, which adopts two ways of combline filters and absorption wall decoupling. A combline filter and an absorption wall are used, respectively, for internal and external decoupling. The combline filter is incorporated between the ground of the two adjacent antennas, which reduces the mutual coupling between them. Additionally, the mutual coupling of radiation between adjacent antennas is significantly reduced by the absorber wall. These combline filters and absorber walls use the method of electromagnetic field distribution to explain the reduction in the mutual coupling between the adjacent antennas. The transmission coefficient and surface current distribution explain the effectiveness of the decoupling structure. When the frequency is between 3.8 and 4.8 GHz, the simulation and measurement results show that S11 is less than −10 dB, the bandwidth is 25% and the peak gain is 7.8 dBi. In addition, the proposed MIMO antenna has a high isolation between antenna units (>37 dB), and the envelop correlation coefficient (ECC) is less than 0.005.


  • Open Access

    Absorbing Material of Button Antenna with Directional Radiation of High Gain for P2V Communication

    by Yuanxu Fu, Tao Shen, Jiangling Dou, Zhe Chen

    Vehicular communication systems can be used to enhance the safety level of road users by exchanging safety/warning messages. In this paper, an absorbing material on a button antenna is proposed for pedestrian-to-vehicle (P2V) communication, which provides safety service to road workers on the highway or in a road environment. The button antenna is small in size and is easy to carry for carriers. This antenna is fabricated and tested in an anechoic chamber; it can achieve a maximum gain of 5.5 dBi and an absorption of 92% at 7.6 GHz. The maximum distance of measurement between the absorbing material of the button antenna and the test antenna is less than 150 m. The advantage of the button antenna is that the absorption surface is used in the radiation layer of the antenna so that the antenna can improve the radiation direction and gain. The absorption unit size is 15 × 15 × 5 mm3.


  • Open Access

    Stereoscopic UWB Yagi–Uda Antenna with Stable Gain by Metamaterial for Vehicular 5G Communication

    by Yuanxu Fu, Tao Shen, Jiangling Dou, Zhe Chen

    In this paper, a stereoscopic ultra-wideband (UWB) Yagi–Uda (SUY) antenna with stable gain by near-zero-index metamaterial (NZIM) has been proposed for vehicular 5G communication. The proposed antenna consists of magneto-electric (ME) dipole structure and coaxial feed patch antenna. The combination of patch antenna and ME structure allows the proposed antenna can work as a Yagi–Uda antenna, which enhances its gain and bandwidth. NZIM removes a pair of C-notches on the surface of the ME structure to make it absorb energy, which results in two radiation nulls on both sides of the gain passband. At the same time, the bandwidth can be enhanced effectively. In order to further improve the stable gain, impedance matching is achieved by removing the patch diagonally; thus, it is able to tune the antenna gain of the suppression boundary and open the possibility to reach the most important characteristic: a very stable gain in a wide frequency range. The SUY antenna is fabricated and measured, which has a measured −10 dBi impedance bandwidth of approximately 40% (3.5–5.5 GHz). Within it, the peak gain of the antenna reaches 8.5 dBi, and the flat in-band gain has a ripple lower than 0.5 dBi.