Meridian Haas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Meridian Haas has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Shima Nazari
University of California, Davis
6 shared publications - Armin Abdolmohammadi
Department of Mechanical and Aerospace Engineering, University of California at Davis, Davis, CA, USA
2 shared publications Abhigyan Majumdar
1 shared publication- Alireza Nemati
Qingdao University
1 shared publication Armin Abdolmohammadi
1 shared publicationIsabella Elliot
1 shared publication
Latest Publications
- Open Access
Battery Health Aware Nonlinear Model Predictive Control of a Parallel Electric–Hydraulic Hybrid Wheel Loader
Parallel electric–hydraulic hybrid (PEHH) powertrains offer benefits of lower energy consumption and increased battery lifetime compared to pure electric ones. These merits can be extended with advanced control methods that optimally deploy on-board energy sources. This paper proposes a nonlinear model predictive control (NMPC) energy management strategy (EMS) for a PEHH wheel loader. The optimization minimizes energy usage and battery degradation by selecting the optimal power ratio between the electric and hydraulic subsystems. The state prediction is based on a discrete nonlinear dynamic model and an estimate of the future exogenous inputs developed from a high-fidelity digital-twin model of a wheel loader. The NMPC formulation is compared to a baseline rule-based EMS inspired by offline optimal control. The proposed NMPC results in 31.7% less battery degradation and 9.14% energy consumption reduction even with a 20% error in the preview information. Hardware-in-the-loop (HiL) experiments validate our results and show that the NMPC EMS can be implemented in real time even with higher prediction error increasing the maximum computational time.
Open AccessBattery Health Aware Nonlinear Model Predictive Control of a Parallel Electric–Hydraulic Hybrid Wheel Loader
Parallel electric–hydraulic hybrid (PEHH) powertrains offer benefits of lower energy consumption and increased battery lifetime compared to pure electric ones. These merits can be extended with advanced control methods that optimally deploy on-board energy sources. This paper proposes a nonlinear model predictive control (NMPC) energy management strategy (EMS) for a PEHH wheel loader. The optimization minimizes energy usage and battery degradation by selecting the optimal power ratio between the electric and hydraulic subsystems. The state prediction is based on a discrete nonlinear dynamic model and an estimate of the future exogenous inputs developed from a high-fidelity digital-twin model of a wheel loader. The NMPC formulation is compared to a baseline rule-based EMS inspired by offline optimal control. The proposed NMPC results in 31.7% less battery degradation and 9.14% energy consumption reduction even with a 20% error in the preview information. Hardware-in-the-loop (HiL) experiments validate our results and show that the NMPC EMS can be implemented in real time even with higher prediction error increasing the maximum computational time.
- 6 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (3) , 4231-4240
Combined Control and Design Optimization of a Parallel Electric–Hydraulic Hybrid Wheel Loader to Prolong Battery Lifetime
Electric off-road vehicles reduce noise pollution and tailpipe emissions. In addition, hybridizing the electric powertrain with a hydraulic accumulator as a secondary power source can increase the battery life and reduce energy consumption with appropriate control. The complex interactions between powertrain component sizing and optimal operation are key to enhancing the overall system operation. Co-design or combined control and design optimization creates an optimal solution that considers this coupling, superior to the traditional sequential design approach. This work formulates and solves the control co-design problem for a wheel loader with a parallel electric–hydraulic hybrid (PEHH) powertrain. A verified digital-twin wheel loader model that captures the bucket rigid-body dynamics, lifting mechanism, and soil particle mechanics is used to generate diverse working cycles. The co-design methodology minimizes the total operational cost by emphasizing battery life requirements and accounting for powertrain component and energy usage costs. The problem is formulated as a singular optimization problem and solved with the GPOPS-II software for the optimal sizing and control for each sequence. The optimal result decreases the total cost compared to a purely electric wheel loader by requiring a smaller battery and electric motor. Comparison of specified sequences demonstrates that the optimization is robust to material changes and showcases a strong correlation between cycle speed and powertrain component sizes.
- 6 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 12 (3) , 4231-4240
Combined Control and Design Optimization of a Parallel Electric–Hydraulic Hybrid Wheel Loader to Prolong Battery Lifetime
Electric off-road vehicles reduce noise pollution and tailpipe emissions. In addition, hybridizing the electric powertrain with a hydraulic accumulator as a secondary power source can increase the battery life and reduce energy consumption with appropriate control. The complex interactions between powertrain component sizing and optimal operation are key to enhancing the overall system operation. Co-design or combined control and design optimization creates an optimal solution that considers this coupling, superior to the traditional sequential design approach. This work formulates and solves the control co-design problem for a wheel loader with a parallel electric–hydraulic hybrid (PEHH) powertrain. A verified digital-twin wheel loader model that captures the bucket rigid-body dynamics, lifting mechanism, and soil particle mechanics is used to generate diverse working cycles. The co-design methodology minimizes the total operational cost by emphasizing battery life requirements and accounting for powertrain component and energy usage costs. The problem is formulated as a singular optimization problem and solved with the GPOPS-II software for the optimal sizing and control for each sequence. The optimal result decreases the total cost compared to a purely electric wheel loader by requiring a smaller battery and electric motor. Comparison of specified sequences demonstrates that the optimization is robust to material changes and showcases a strong correlation between cycle speed and powertrain component sizes.
- Open Access
- 2 February 2026
- Published by MDPI AG in Preprints.org
Battery Health Aware Nonlinear Model Predictive Control of a Parallel Electric-Hydraulic Hybrid Wheel Loader
Parallel electric-hydraulic hybrid (PEHH) powertrains offer benefits of lower energy consumption and increased battery lifetime compared to pure electric ones. These merits can be extended with advanced control methods that optimally deploy on-board energy sources. This work proposes a nonlinear model predictive control (NMPC) energy management strategy (EMS) for a PEHH wheel loader. The optimization minimizes energy usage and battery degradation by selecting the optimal power ratio between the electric and hydraulic subsystems. The state prediction is based on a discrete nonlinear dynamic model and an estimate of the future exogenous inputs developed from a high-fidelity digital-twin model of a wheel loader. The NMPC formulation is compared to a baseline rule-based EMS inspired by offline optimal control. The proposed NMPC results in 38.8\% less battery degradation and 7.5\% energy consumption reduction, even with 20\% error in the preview information. Hardware-in-the-loop (HiL) experiments validate our results and show that the NMPC EMS can be implemented in real-time, even with higher prediction error increasing the maximum computational time.
- 2 February 2026
- Published by MDPI AG in Preprints.org
Open AccessBattery Health Aware Nonlinear Model Predictive Control of a Parallel Electric-Hydraulic Hybrid Wheel Loader
Parallel electric-hydraulic hybrid (PEHH) powertrains offer benefits of lower energy consumption and increased battery lifetime compared to pure electric ones. These merits can be extended with advanced control methods that optimally deploy on-board energy sources. This work proposes a nonlinear model predictive control (NMPC) energy management strategy (EMS) for a PEHH wheel loader. The optimization minimizes energy usage and battery degradation by selecting the optimal power ratio between the electric and hydraulic subsystems. The state prediction is based on a discrete nonlinear dynamic model and an estimate of the future exogenous inputs developed from a high-fidelity digital-twin model of a wheel loader. The NMPC formulation is compared to a baseline rule-based EMS inspired by offline optimal control. The proposed NMPC results in 38.8\% less battery degradation and 7.5\% energy consumption reduction, even with 20\% error in the preview information. Hardware-in-the-loop (HiL) experiments validate our results and show that the NMPC EMS can be implemented in real-time, even with higher prediction error increasing the maximum computational time.
- Open Access
- 3 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Combined Control and Design Optimization of a Parallel Electric-Hydraulic Hybrid Wheel Loader to Prolong Battery Lifetime
Electric off-road vehicles provide an opportunity for reductions in noise pollution and tailpipe emissions along with increased fuel economy, productivity, and reliability. However, the complex duty cycles, high power requirements, and long operational hours present difficulties toward electrification. Hybridizing the powertrain with the addition of a hydraulic accumulator as a secondary power source increases the battery life and can reduce energy consumption with appropriate control. The complex interactions between powertrain component sizing and optimal operation are key to enhancing the overall system operation. Co-design or combined control and design optimization creates an optimal solution that considers this coupling, superior to the traditional sequential design approach. This work formulates and solves the control co-design problem for a wheel loader with a parallel electric-hydraulic hybrid powertrain. A verified digital-twin wheel loader model that captures the bucket rigid-body dynamics, lifting mechanism, and soil particle mechanics is used to generate diverse working cycles. Our co-design methodology minimizes the total operational cost by emphasizing battery life requirements and accounting for powertrain component and energy usage costs. The optimal result decreases the total cost compared to a purely electric wheel loader. Comparison of specified sequences demonstrates that the optimization is robust to material changes and showcases a strong correlation between cycle speed and powertrain component sizes.
- 3 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessCombined Control and Design Optimization of a Parallel Electric-Hydraulic Hybrid Wheel Loader to Prolong Battery Lifetime
Electric off-road vehicles provide an opportunity for reductions in noise pollution and tailpipe emissions along with increased fuel economy, productivity, and reliability. However, the complex duty cycles, high power requirements, and long operational hours present difficulties toward electrification. Hybridizing the powertrain with the addition of a hydraulic accumulator as a secondary power source increases the battery life and can reduce energy consumption with appropriate control. The complex interactions between powertrain component sizing and optimal operation are key to enhancing the overall system operation. Co-design or combined control and design optimization creates an optimal solution that considers this coupling, superior to the traditional sequential design approach. This work formulates and solves the control co-design problem for a wheel loader with a parallel electric-hydraulic hybrid powertrain. A verified digital-twin wheel loader model that captures the bucket rigid-body dynamics, lifting mechanism, and soil particle mechanics is used to generate diverse working cycles. Our co-design methodology minimizes the total operational cost by emphasizing battery life requirements and accounting for powertrain component and energy usage costs. The optimal result decreases the total cost compared to a purely electric wheel loader. Comparison of specified sequences demonstrates that the optimization is robust to material changes and showcases a strong correlation between cycle speed and powertrain component sizes.
- 19 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 8, 2973-2978
Combined Design and Control Optimization for a Series Hybrid Electric Vehicle With an Opposed Piston Engine
Hybrid electric vehicles (HEV) enable reduction of emissions without sacrificing consumer expected range and drivability. The diversification of the powertrain with multiple power sources allows downsizing the internal combustion engine and implementing optimal energy management strategies. The interaction among components of an HEV are key to the overall efficiency. Therefore, efficiency potential is lost if this interdependence is neglected during the powertrain design by focusing on individual optimization of component specifications. This work formulates and solves a co-design problem by integrating the energy management with the optimal powertrain and drivetrain component sizing for a hybrid powertrain equipped with an opposed piston (OP) engine in a series architecture. Our novel approach develops a model for an OP engine and integrates battery capacity degradation into the co-design problem. The optimal solution allows for a minimally sized engine that accounts for the average power requirements, and a large enough battery to provide fast power dynamics.
- 19 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Control Systems Letters
- Vol. 8, 2973-2978
Combined Design and Control Optimization for a Series Hybrid Electric Vehicle With an Opposed Piston Engine
Hybrid electric vehicles (HEV) enable reduction of emissions without sacrificing consumer expected range and drivability. The diversification of the powertrain with multiple power sources allows downsizing the internal combustion engine and implementing optimal energy management strategies. The interaction among components of an HEV are key to the overall efficiency. Therefore, efficiency potential is lost if this interdependence is neglected during the powertrain design by focusing on individual optimization of component specifications. This work formulates and solves a co-design problem by integrating the energy management with the optimal powertrain and drivetrain component sizing for a hybrid powertrain equipped with an opposed piston (OP) engine in a series architecture. Our novel approach develops a model for an OP engine and integrates battery capacity degradation into the co-design problem. The optimal solution allows for a minimally sized engine that accounts for the average power requirements, and a large enough battery to provide fast power dynamics.
- Open Access
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 157149-157164
Sizing and Life Cycle Assessment of Small-Scale Power Backup Solutions: A Statistical Approach
The increasing frequency of natural disasters, such as floods and wildfires, necessitates enhanced emergency management plans. Reliable backup power for critical infrastructure along evacuation routes is urgent. Using a case study approach, this study investigated small scale power backup solutions for a traffic light. We deployed a statistical approach to study the sizing problem for four alternative solutions: gasoline generator, battery pack, fuel cell system, and photovoltaic (PV) panels with a battery. Leveraging data from the State of California, we constructed probability distribution profiles to model power outage occurrence and duration and considered two representative high and low Global Horizontal Irradiance (GHI) locations. A Monte Carlo simulation, generating 10,000 power outage scenarios, was adopted to size the systems and evaluate their lifetime cost and Global Warming Potential (GWP). Following this approach allowed us to compare different systems and sizes based on the percentage of power outages that they can support, which is superior to sizing and analysis based on a single scenario. Our results show that the PV-battery system is the optimal choice, especially for areas with high GHI. The battery only option is a suitable choice only for short power outage scenarios, but increasing the battery size to cover prolonged outages will be both expensive and ungreen. Fuel cell systems, on the other hand, can be a better choice for the longest events; however, results show that, unlike the conventional belief, cheap gasoline generators can be comparable to fuel cell systems in terms of GWP due to the standby nature of power backup systems and the high CO2 emissions produced during the manufacturing process for fuel cell engine and hydrogen tanks. This study also explored additional factors for gasoline generators and fuel cells, such as PV panel shading, refueling cost and frequency, and the sensitivity of outcomes to component cost assumptions and variations.
- 23 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 157149-157164
Open AccessSizing and Life Cycle Assessment of Small-Scale Power Backup Solutions: A Statistical Approach
The increasing frequency of natural disasters, such as floods and wildfires, necessitates enhanced emergency management plans. Reliable backup power for critical infrastructure along evacuation routes is urgent. Using a case study approach, this study investigated small scale power backup solutions for a traffic light. We deployed a statistical approach to study the sizing problem for four alternative solutions: gasoline generator, battery pack, fuel cell system, and photovoltaic (PV) panels with a battery. Leveraging data from the State of California, we constructed probability distribution profiles to model power outage occurrence and duration and considered two representative high and low Global Horizontal Irradiance (GHI) locations. A Monte Carlo simulation, generating 10,000 power outage scenarios, was adopted to size the systems and evaluate their lifetime cost and Global Warming Potential (GWP). Following this approach allowed us to compare different systems and sizes based on the percentage of power outages that they can support, which is superior to sizing and analysis based on a single scenario. Our results show that the PV-battery system is the optimal choice, especially for areas with high GHI. The battery only option is a suitable choice only for short power outage scenarios, but increasing the battery size to cover prolonged outages will be both expensive and ungreen. Fuel cell systems, on the other hand, can be a better choice for the longest events; however, results show that, unlike the conventional belief, cheap gasoline generators can be comparable to fuel cell systems in terms of GWP due to the standby nature of power backup systems and the high CO2 emissions produced during the manufacturing process for fuel cell engine and hydrogen tanks. This study also explored additional factors for gasoline generators and fuel cells, such as PV panel shading, refueling cost and frequency, and the sensitivity of outcomes to component cost assumptions and variations.
- Top Cited Papers
- 6 May 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (79) , 30621-30641
Control and control-oriented modeling of PEM water electrolyzers: A review
- 6 May 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (79) , 30621-30641
Top Cited PapersControl and control-oriented modeling of PEM water electrolyzers: A review