Jingyang Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jingyang Cao has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Jia Dong
China Mobile Research Institute, Beijing, China
2 shared publications - Nan Li
China Mobile Research Institute
2 shared publications Zhe Shao
China Mobile Research Institute, Beijing, China
2 shared publications- Fan Wu
Southeast University
1 shared publication - Haiyu Ding
China Mobile Research Institute, Beijing 100053, China
1 shared publication Hao Chen
State Key Laboratory of Millimeter Waves, School of Information Science and Engineering, Southeast University, Nanjing, China
1 shared publication
Latest Publications
- 3 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (1) , 84-88
Compact Leakage-Wave Antenna Design and Measurement Analysis in Highway Tunnel at N41 band
In this letter, to meet the small wind load area requirement in a highway tunnel scenario, a compact leakywave antennas (LWA) end-fire array is designed and machined. The LWA utilizes an offset double-sided parallel strip-line (DSPSL) structure as leaky waveguides, and two short vias at the end are used for impedance matching instead of port loading. The effect of the via parameters are analyzed. Moreover, the average reference signal received power (RSRP) at N41 band (2.496GHz-2.69GHz) in a realistic highway tunnel at Fujian are measured by a handheld terminal device. The coverage performances between traditional leaky cables (LC) and different polarized LWA are compared under the highway tunnel environment. The path loss, shadow fading and secondorder statistics channel parameters are extracted and analyzed. It shows that the high gain LWA owns a higher RSRP compared to LC. Dual-antenna polarization diversity reduces small-scale fading. Distributed antenna diversity shows RSRP is more sensitive to distributed distance, and the coverage enhancement of dual-polarization distributed diversity is not significant.
- 3 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (1) , 84-88
Compact Leakage-Wave Antenna Design and Measurement Analysis in Highway Tunnel at N41 band
In this letter, to meet the small wind load area requirement in a highway tunnel scenario, a compact leakywave antennas (LWA) end-fire array is designed and machined. The LWA utilizes an offset double-sided parallel strip-line (DSPSL) structure as leaky waveguides, and two short vias at the end are used for impedance matching instead of port loading. The effect of the via parameters are analyzed. Moreover, the average reference signal received power (RSRP) at N41 band (2.496GHz-2.69GHz) in a realistic highway tunnel at Fujian are measured by a handheld terminal device. The coverage performances between traditional leaky cables (LC) and different polarized LWA are compared under the highway tunnel environment. The path loss, shadow fading and secondorder statistics channel parameters are extracted and analyzed. It shows that the high gain LWA owns a higher RSRP compared to LC. Dual-antenna polarization diversity reduces small-scale fading. Distributed antenna diversity shows RSRP is more sensitive to distributed distance, and the coverage enhancement of dual-polarization distributed diversity is not significant.
- Open Access
- 14 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (10) , 2929-2933
Antenna Deployment Optimization for Coverage Performance Improvement in High-Speed Railway Communications
This letter presents a low-cost antenna deployment optimization method for the coverage performance improvement in high-speed railway (HSR) communications. The installation status of the base station antenna is optimized to realize the best projection of the antenna gain pattern on the line-type coverage area for the railway dedicated network. Detailed analysis of the optimized antenna deployment is conducted for different range of the engineering parameters of the sites. Moreover, a simplified deployment method is presented and verified, suitable for both the discrete antenna with a flexible azimuth angle and integrated antennas with a fixed included angle. The field test is carried out to validate the superior coverage performance of the proposed antenna deployment solution in comparison with traditional antenna solutions.
- 14 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23 (10) , 2929-2933
Open AccessAntenna Deployment Optimization for Coverage Performance Improvement in High-Speed Railway Communications
This letter presents a low-cost antenna deployment optimization method for the coverage performance improvement in high-speed railway (HSR) communications. The installation status of the base station antenna is optimized to realize the best projection of the antenna gain pattern on the line-type coverage area for the railway dedicated network. Detailed analysis of the optimized antenna deployment is conducted for different range of the engineering parameters of the sites. Moreover, a simplified deployment method is presented and verified, suitable for both the discrete antenna with a flexible azimuth angle and integrated antennas with a fixed included angle. The field test is carried out to validate the superior coverage performance of the proposed antenna deployment solution in comparison with traditional antenna solutions.
- 6 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (5) , 1144-1148
A Dual-CP Multibeam Transmit-Array Antenna Based on Anisotropic Impedance Surfaces and Hybrid Phase Compensation
In this paper, a dual-circularly-polarized (dual-CP) multi-beam transmit-array (TA) antenna is proposed and demonstrated based on anisotropic impedance surfaces (AISs) and hybrid phase compensation strategy. A set of eight fully-planarized TA cells based on cascaded AISs are designed with a constant dynamic phase difference between each other, possessing a periodicity of 0.48 λ 0 × 0.48 λ 0 and a total thickness of 0.71 λ 0 , where λ 0 is the free-space wavelength at center frequency. By introducing Berry phase determined rotation angles on the eight designed cells, dual-CP transmissive phase delays can be achieved independently. Moreover, planar dual-CP antenna arrays are designed and utilized as the feed cluster of the multi-beam TA. The bifocal dual-CP multi-beam TA antenna generates eight RHCP beams and eight LHCP beams. The measured peak gain values are between 21.1 and 23.7 dBic, while the AR values are all below 3 dB for all the beams.
- 6 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 22 (5) , 1144-1148
A Dual-CP Multibeam Transmit-Array Antenna Based on Anisotropic Impedance Surfaces and Hybrid Phase Compensation
In this paper, a dual-circularly-polarized (dual-CP) multi-beam transmit-array (TA) antenna is proposed and demonstrated based on anisotropic impedance surfaces (AISs) and hybrid phase compensation strategy. A set of eight fully-planarized TA cells based on cascaded AISs are designed with a constant dynamic phase difference between each other, possessing a periodicity of 0.48 λ 0 × 0.48 λ 0 and a total thickness of 0.71 λ 0 , where λ 0 is the free-space wavelength at center frequency. By introducing Berry phase determined rotation angles on the eight designed cells, dual-CP transmissive phase delays can be achieved independently. Moreover, planar dual-CP antenna arrays are designed and utilized as the feed cluster of the multi-beam TA. The bifocal dual-CP multi-beam TA antenna generates eight RHCP beams and eight LHCP beams. The measured peak gain values are between 21.1 and 23.7 dBic, while the AR values are all below 3 dB for all the beams.