Matteo Trobinger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Matteo Trobinger has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Gian Pietro Picco
Department of Information Engineering and Computer Science, University of Trento, Trento, Italy
4 shared publications - Davide Vecchia
Department of Information Engineering and Computer Science, University of Trento, Trento, Italy
2 shared publications - Enrico Soprana
Department of Information Engineering and Computer Science (DISI), University of Trento, Italy
2 shared publications - Amy Lynn Murphy
DIGIS, Fondazione Bruno Kessler, Trento, Italy
1 shared publication - Timofei Istomin
Univ. of Trento, Trento, Italy
1 shared publication
Latest Publications
- Open Access
- 20 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. PP (15) , 1
samu: A Flexible and Efficient Framework for Ultra-wideband Concurrent Transmissions
Concurrent transmissions (CTX) are a state-of-the-art technique for low-power wireless networking, enabling performance unmatched by conventional routing-based approaches. However, their use is notoriously complex, as it hinges on many low-level system aspects distracting developers from the protocol logic. This is exacerbated in ultra-wideband (UWB) radios, recently shown to enable higher CTX performance than IEEE 802.15.4 and BLE, but significantly more energy-hungry, posing new problems to developers. A case in point is the deep sleep mode in popular UWB radios: it yields negligible consumption (50 nA) in periods of inactivity—crucial in real-world deployments—during which, however, clock drifts may disrupt the tight time synchronization required by CTX. Existing systems avoid the complexity of reconciling these conflicting needs via solutions with significantly higher consumption, hampering real-world applicability. We address these challenges with SAMU, a novel framework allowing developers to fully exploit the advantages of CTX over UWB via simple, expressive, and flexible abstractions removing the underlying complexity, embodied in an optimized and efficient runtime support. A distinctive trait of SAMU is the fine-grained control it provides over individual CTX, unlocking design opportunities unavailable in existing frameworks offering only high-level building blocks (e.g., CTX-based floods). We illustrate the power of SAMU by showing how existing CTX protocols can be easily built atop it, and evaluate the resulting performance in a large-scale testbed. Our results confirm that SAMU successfully combines high-level programming with a low-latency, energy-efficient, and reliable runtime support, providing a foundation for the protocol design and real-world deployment of CTX-based systems.
- 20 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. PP (15) , 1
Open Accesssamu: A Flexible and Efficient Framework for Ultra-wideband Concurrent Transmissions
Concurrent transmissions (CTX) are a state-of-the-art technique for low-power wireless networking, enabling performance unmatched by conventional routing-based approaches. However, their use is notoriously complex, as it hinges on many low-level system aspects distracting developers from the protocol logic. This is exacerbated in ultra-wideband (UWB) radios, recently shown to enable higher CTX performance than IEEE 802.15.4 and BLE, but significantly more energy-hungry, posing new problems to developers. A case in point is the deep sleep mode in popular UWB radios: it yields negligible consumption (50 nA) in periods of inactivity—crucial in real-world deployments—during which, however, clock drifts may disrupt the tight time synchronization required by CTX. Existing systems avoid the complexity of reconciling these conflicting needs via solutions with significantly higher consumption, hampering real-world applicability. We address these challenges with SAMU, a novel framework allowing developers to fully exploit the advantages of CTX over UWB via simple, expressive, and flexible abstractions removing the underlying complexity, embodied in an optimized and efficient runtime support. A distinctive trait of SAMU is the fine-grained control it provides over individual CTX, unlocking design opportunities unavailable in existing frameworks offering only high-level building blocks (e.g., CTX-based floods). We illustrate the power of SAMU by showing how existing CTX protocols can be easily built atop it, and evaluate the resulting performance in a large-scale testbed. Our results confirm that SAMU successfully combines high-level programming with a low-latency, energy-efficient, and reliable runtime support, providing a foundation for the protocol design and real-world deployment of CTX-based systems.
- Open Access
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (24) , 39651-39664
A Case for Ultrawideband Concurrent Transmissions in Wireless Control
Wireless networked control systems (WNCS) are at the forefront of academic and industrial efforts, due to the high deployment flexibility and low cost offered by their untethered multihop operation. However, they pose the unavoidable challenge of matching the reliability and latency of wired systems, exacerbated by energy efficiency constraints. Mainstream solutions, in industry and academia alike, largely rely on the routing-based protocol stacks for IEEE 802.15.4 narrowband radios. We identify an alternative to the status quo in the unexplored synergy between concurrent transmissions (CTX) and ultra-wideband (UWB) radios. Low-power wireless stacks based on CTX are known to offer order-of-magnitude improvements w.r.t. mainstream ones in reliability, latency, and energy-efficiency—i.e., the key WNCS requirements above. UWB is very popular in localization applications but rarely considered in multihop networking despite its high data rate and resilience to interference, yielding a beneficial impact on the requirements above. We elicit the potential of this synergy via a novel UWB stack based on a state-of-the-art CTX design. We quantitatively demonstrate its effectiveness in supporting different closed-loop control strategies in a realistic scenario via experiments in a 36-node, 6-hop cyber-physical testbed enabling direct comparison between the original narrowband system and our UWB one. Results show that the UWB stack achieves$10\times $ higher reliability and$3\times $ lower latency with half the energy consumption, pushing the envelope of low-power networking support for wireless control.- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (24) , 39651-39664
Open AccessA Case for Ultrawideband Concurrent Transmissions in Wireless Control
Wireless networked control systems (WNCS) are at the forefront of academic and industrial efforts, due to the high deployment flexibility and low cost offered by their untethered multihop operation. However, they pose the unavoidable challenge of matching the reliability and latency of wired systems, exacerbated by energy efficiency constraints. Mainstream solutions, in industry and academia alike, largely rely on the routing-based protocol stacks for IEEE 802.15.4 narrowband radios. We identify an alternative to the status quo in the unexplored synergy between concurrent transmissions (CTX) and ultra-wideband (UWB) radios. Low-power wireless stacks based on CTX are known to offer order-of-magnitude improvements w.r.t. mainstream ones in reliability, latency, and energy-efficiency—i.e., the key WNCS requirements above. UWB is very popular in localization applications but rarely considered in multihop networking despite its high data rate and resilience to interference, yielding a beneficial impact on the requirements above. We elicit the potential of this synergy via a novel UWB stack based on a state-of-the-art CTX design. We quantitatively demonstrate its effectiveness in supporting different closed-loop control strategies in a realistic scenario via experiments in a 36-node, 6-hop cyber-physical testbed enabling direct comparison between the original narrowband system and our UWB one. Results show that the UWB stack achieves$10\times $ higher reliability and$3\times $ lower latency with half the energy consumption, pushing the envelope of low-power networking support for wireless control. - Open Access
- 9 May 2023
- Published by Association for Computing Machinery (ACM)
- p. 261-273
Network On or Off? Instant Global Binary Decisions over UWB with Flick
In many low-power wireless systems, a condition occurring at some nodes (e.g., an anomalous sensor sample, an aperiodic packet to transmit, a new joining node) determines whether the entire network should be awake (e.g., to react to the anomaly, deliver the packet, update the node group) or enter sleep. State-of-the-art protocols exploit periodic network-wide floods based on concurrent transmissions (e.g., via Glossy) to establish the global decision quickly, reliably, and efficiently. Still, time is of the essence: the faster the network agrees, the faster it either reacts or enters sleep. Flick achieves this global decision with order-of-magnitude latency improvements and 5-nines reliability by detecting and disseminating a binary on/off vote via the preamble of a packet instead of its full content. The actual realization of this simple idea entails several techniques on the ultra-wideband (UWB) radios we use. We evaluate Flick over a 78-node network in the Cloves testbed showing that, e.g., a single node can globally flick the switch to on across a 10-hop diameter in < 500U+03BC;s , i.e., roughly the time for a Glossy packet to go across a single hop, and with 4.4 × less energy. We demonstrate the potential of Flick by integrating it into staple protocols and evaluating the performance improvements it enables.
- 9 May 2023
- Published by Association for Computing Machinery (ACM)
- p. 261-273
Open AccessNetwork On or Off? Instant Global Binary Decisions over UWB with Flick
In many low-power wireless systems, a condition occurring at some nodes (e.g., an anomalous sensor sample, an aperiodic packet to transmit, a new joining node) determines whether the entire network should be awake (e.g., to react to the anomaly, deliver the packet, update the node group) or enter sleep. State-of-the-art protocols exploit periodic network-wide floods based on concurrent transmissions (e.g., via Glossy) to establish the global decision quickly, reliably, and efficiently. Still, time is of the essence: the faster the network agrees, the faster it either reacts or enters sleep. Flick achieves this global decision with order-of-magnitude latency improvements and 5-nines reliability by detecting and disseminating a binary on/off vote via the preamble of a packet instead of its full content. The actual realization of this simple idea entails several techniques on the ultra-wideband (UWB) radios we use. We evaluate Flick over a 78-node network in the Cloves testbed showing that, e.g., a single node can globally flick the switch to on across a 10-hop diameter in < 500U+03BC;s , i.e., roughly the time for a Glossy packet to go across a single hop, and with 4.4 × less energy. We demonstrate the potential of Flick by integrating it into staple protocols and evaluating the performance improvements it enables.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 84-95
Interference-Resilient Ultra-Low Power Aperiodic Data Collection
Aperiodic data collection received little attention in wireless sensor networks, compared to its periodic counterpart. The recent Crystal system uses synchronous transmissions to support aperiodic traffic with near-perfect reliability, low latency, and ultra-low power consumption. However, its performance is known under mild interference-a concern, as Crystal relies heavily on the (noise-sensitive) capture effect and targets aperiodic traffic where "every packet counts". We exploit a 49-node indoor testbed where, in contrast to existing evaluations using only naturally present interference to evaluate synchronous systems, we rely on JamLab to generate noise patterns that are not only more disruptive and extensive, but also reproducible. We show that a properly configured, unmodified Crystal yields perfect reliability (unlike Glossy) in several noise scenarios, but cannot sustain extreme ones (e.g., an emulated microwave oven near the sink) that instead are handled by routing-based approaches. We extend Crystal with techniques known to mitigate interference-channel hopping and noise detection-and demonstrate that these allow Crystal to achieve performance akin to the original even under multiple sources of strong interference.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 84-95
Interference-Resilient Ultra-Low Power Aperiodic Data Collection
Aperiodic data collection received little attention in wireless sensor networks, compared to its periodic counterpart. The recent Crystal system uses synchronous transmissions to support aperiodic traffic with near-perfect reliability, low latency, and ultra-low power consumption. However, its performance is known under mild interference-a concern, as Crystal relies heavily on the (noise-sensitive) capture effect and targets aperiodic traffic where "every packet counts". We exploit a 49-node indoor testbed where, in contrast to existing evaluations using only naturally present interference to evaluate synchronous systems, we rely on JamLab to generate noise patterns that are not only more disruptive and extensive, but also reproducible. We show that a properly configured, unmodified Crystal yields perfect reliability (unlike Glossy) in several noise scenarios, but cannot sustain extreme ones (e.g., an emulated microwave oven near the sink) that instead are handled by routing-based approaches. We extend Crystal with techniques known to mitigate interference-channel hopping and noise detection-and demonstrate that these allow Crystal to achieve performance akin to the original even under multiple sources of strong interference.