Qingbin Cao
Research Subjects
Qingbin Cao has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Hao Liu
Hefei institute for Public Safety Research Tsinghua University Hefei China
4 shared publications- Kai Liu
Department of Chemical Engineering & State Key Laboratory of Chemical Engineering and Low‐Carbon Technology Tsinghua University Beijing People's Republic of China
4 shared publications - Yang Lu
Tsinghua University
4 shared publications Yu Ou
State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People’s Republic of China
4 shared publicationsPan Zhou
State Key Laboratory of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, People’s Republic of China
3 shared publications- Wenhui Hou
Tsinghua University
3 shared publications
Latest Publications
- 26 January 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (2) , e202501440
Applications of Stimuli‐Responsive Hydrogels in Renewable Energy: A Review
With the surging global demand for renewable energy, stimuli‐responsive hydrogels have emerged asa research hotspot in this field, owing to their unique stimuli‐responsive properties, high water content, and remarkable design flexibility. First, this work systematically introduces the molecular and structural design strategies of stimuli‐responsive hydrogels, encompassing diverse stimulus‐responsive mechanisms. Subsequently, it comprehensively reviews the application progress of stimuli‐responsive hydrogels in emerging energy technologies, including sustainable solar utilization, energy storage and conversion, and intelligent energy management. Additionally, the review analyzes current challenges and explores the future development directions of stimuli‐responsive hydrogels in conjunction with sustainable development needs. This review not only comprehensively presents the application potential of stimuli‐responsive hydrogels in the new energy field but also provides key references for the subsequent development of high‐performance hydrogels and the advancement of renewable energy technologies.
- 26 January 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (2) , e202501440
Applications of Stimuli‐Responsive Hydrogels in Renewable Energy: A Review
With the surging global demand for renewable energy, stimuli‐responsive hydrogels have emerged asa research hotspot in this field, owing to their unique stimuli‐responsive properties, high water content, and remarkable design flexibility. First, this work systematically introduces the molecular and structural design strategies of stimuli‐responsive hydrogels, encompassing diverse stimulus‐responsive mechanisms. Subsequently, it comprehensively reviews the application progress of stimuli‐responsive hydrogels in emerging energy technologies, including sustainable solar utilization, energy storage and conversion, and intelligent energy management. Additionally, the review analyzes current challenges and explores the future development directions of stimuli‐responsive hydrogels in conjunction with sustainable development needs. This review not only comprehensively presents the application potential of stimuli‐responsive hydrogels in the new energy field but also provides key references for the subsequent development of high‐performance hydrogels and the advancement of renewable energy technologies.
- 2 October 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (19) , 19398-19409
Asymmetric Trihalogenated Aromatic Lithium Salt Induced Lithium Halide Rich Interface for Stable Cycling of All-Solid-State Lithium Batteries
Solid polymer electrolytes (SPEs) are the key components for all-solid-state lithium metal batteries with high energy density and intrinsic safety. However, the low lithium ion transference number (t+) of a conventional SPE and its unstable electrolyte/electrode interface cannot guarantee long-term stable operation. Herein, asymmetric trihalogenated aromatic lithium salts, i.e., lithium (3,4,5-trifluorobenzenesulfonyl)(trifluoromethanesulfonyl)imide (LiFFF) and lithium (4-bromo-3,5-difluorobenzenesulfonyl)(trifluoromethanesulfonyl)imide (LiFBF), are synthesized for polymer electrolytes. They exhibit higher t+ values and better compatibility with Li metal than conventional lithium bis(trifluoromethanesulfonyl) imide (LiTFSI). Due to the trihalogenated aromatic anions, LiFFF- and LiFBF-based electrolytes are prone to generate an LiF- and LiBr-rich solid electrolyte interphase (SEI), therefore increasing the stability of the solid electrolyte/anode interface. Particularly, LiFBF could induce a LiF/LiBr hybrid SEI, where LiF shows a high Young's modulus and high surface energy for homogenizing Li ion flux and LiBr exhibits an extremely low Li ion diffusion barrier in the SEI layer. As a result, the Li/Li symmetric cells could remain stable for more than 1200 h without a short circuit and the LiFePO4/Li batteries showed superb electrochemical performance over 1200 cycles at 1 C. This work provides valuable insights from the perspective of lithium salt molecular structures for high-performance all-solid-state lithium metal batteries.
- 2 October 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (19) , 19398-19409
Asymmetric Trihalogenated Aromatic Lithium Salt Induced Lithium Halide Rich Interface for Stable Cycling of All-Solid-State Lithium Batteries
Solid polymer electrolytes (SPEs) are the key components for all-solid-state lithium metal batteries with high energy density and intrinsic safety. However, the low lithium ion transference number (t+) of a conventional SPE and its unstable electrolyte/electrode interface cannot guarantee long-term stable operation. Herein, asymmetric trihalogenated aromatic lithium salts, i.e., lithium (3,4,5-trifluorobenzenesulfonyl)(trifluoromethanesulfonyl)imide (LiFFF) and lithium (4-bromo-3,5-difluorobenzenesulfonyl)(trifluoromethanesulfonyl)imide (LiFBF), are synthesized for polymer electrolytes. They exhibit higher t+ values and better compatibility with Li metal than conventional lithium bis(trifluoromethanesulfonyl) imide (LiTFSI). Due to the trihalogenated aromatic anions, LiFFF- and LiFBF-based electrolytes are prone to generate an LiF- and LiBr-rich solid electrolyte interphase (SEI), therefore increasing the stability of the solid electrolyte/anode interface. Particularly, LiFBF could induce a LiF/LiBr hybrid SEI, where LiF shows a high Young's modulus and high surface energy for homogenizing Li ion flux and LiBr exhibits an extremely low Li ion diffusion barrier in the SEI layer. As a result, the Li/Li symmetric cells could remain stable for more than 1200 h without a short circuit and the LiFePO4/Li batteries showed superb electrochemical performance over 1200 cycles at 1 C. This work provides valuable insights from the perspective of lithium salt molecular structures for high-performance all-solid-state lithium metal batteries.
- 1 September 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (17) , 17169-17179
Tuning and Balancing the Donor Number of Lithium Salts and Solvents for High-Performance Li Metal Anode
The low reversibility of Li deposition/stripping in conventional carbonate electrolytes hinders the development of lithium metal batteries. Herein, we proposed a combination of solvents with a moderate donor number (DN) and LiNO3 as the sole salt, which has rarely been attempted due to its low solubility or dissociation degree in common solvents. It is found that the DN value of solvents is highly correlated to the reversibility of Li deposition behavior when LiNO3 is applied as the sole salt. The combination of LiNO3 and solvents with moderate DN behaves like a quasi-concentrated electrolyte even at a common or moderate concentration, while neither the solvents with poor solubility and low dissociation for LiNO3 (which usually corresponds to a low DN) nor the solvents with high dissociation for LiNO3 (which usually corresponds to an overly high DN) can achieve a high reversibility for low conductivity or excessive solvent decomposition. As a result, a Coulombic efficiency as high as 99.6% for Li deposition/stripping is achieved with the optimized combination. We believe this work will give a better understanding of the role of anions and solvents in the regulation of the solvation structure, and DN can be utilized as an important guideline to sieve suitable solvents for LiNO3 as the main salt to exhibit intriguing properties beyond traditional cognition.
- 1 September 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (17) , 17169-17179
Tuning and Balancing the Donor Number of Lithium Salts and Solvents for High-Performance Li Metal Anode
The low reversibility of Li deposition/stripping in conventional carbonate electrolytes hinders the development of lithium metal batteries. Herein, we proposed a combination of solvents with a moderate donor number (DN) and LiNO3 as the sole salt, which has rarely been attempted due to its low solubility or dissociation degree in common solvents. It is found that the DN value of solvents is highly correlated to the reversibility of Li deposition behavior when LiNO3 is applied as the sole salt. The combination of LiNO3 and solvents with moderate DN behaves like a quasi-concentrated electrolyte even at a common or moderate concentration, while neither the solvents with poor solubility and low dissociation for LiNO3 (which usually corresponds to a low DN) nor the solvents with high dissociation for LiNO3 (which usually corresponds to an overly high DN) can achieve a high reversibility for low conductivity or excessive solvent decomposition. As a result, a Coulombic efficiency as high as 99.6% for Li deposition/stripping is achieved with the optimized combination. We believe this work will give a better understanding of the role of anions and solvents in the regulation of the solvation structure, and DN can be utilized as an important guideline to sieve suitable solvents for LiNO3 as the main salt to exhibit intriguing properties beyond traditional cognition.
- 14 August 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (17) , 17527-17535
Fluorinated Carbamate-Based Electrolyte Enables Anion-Dominated Solid Electrolyte Interphase for Highly Reversible Li Metal Anode
Li metal is regarded as the most promising battery anode to boost energy density. However, being faced with the hostile compatibility between the Li anode and traditional carbonate electrolyte, its large-scale industrialization has been in a distressing circumstance due to severe dendrite growth caused by unsatisfying solid electrolyte interphase (SEI). With this regard, accurate control over the composition of the SEI is urgently desired to tackle the electrochemical and mechanical instability at the electrolyte/anode interface. Herein, we report a rationally designed fluorinated carbamate-based electrolyte employing LiNO3 as one of the main salts to induce the preferable anion decomposition to achieve a homogeneous and inorganic (LiF, Li3N, Li2O)-rich SEI. Thus, this electrolyte achieves a high Coulombic efficiency of 99% of the Li metal anode, a stable cycling over 1000 h for Li|Li symmetric cells, more than 100 cycles in 40-μm-thin Li|high-loading-NCM811 full batteries, and >50 cycles in Cu|LiFePO4 pouch cells, which is a promising electrolyte for highly reversible Li metal batteries.
- 14 August 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (17) , 17527-17535
Fluorinated Carbamate-Based Electrolyte Enables Anion-Dominated Solid Electrolyte Interphase for Highly Reversible Li Metal Anode
Li metal is regarded as the most promising battery anode to boost energy density. However, being faced with the hostile compatibility between the Li anode and traditional carbonate electrolyte, its large-scale industrialization has been in a distressing circumstance due to severe dendrite growth caused by unsatisfying solid electrolyte interphase (SEI). With this regard, accurate control over the composition of the SEI is urgently desired to tackle the electrochemical and mechanical instability at the electrolyte/anode interface. Herein, we report a rationally designed fluorinated carbamate-based electrolyte employing LiNO3 as one of the main salts to induce the preferable anion decomposition to achieve a homogeneous and inorganic (LiF, Li3N, Li2O)-rich SEI. Thus, this electrolyte achieves a high Coulombic efficiency of 99% of the Li metal anode, a stable cycling over 1000 h for Li|Li symmetric cells, more than 100 cycles in 40-μm-thin Li|high-loading-NCM811 full batteries, and >50 cycles in Cu|LiFePO4 pouch cells, which is a promising electrolyte for highly reversible Li metal batteries.
- 1 May 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (10) , 9586-9599
Tuning the Li+ Solvation Structure by a “Bulky Coordinating” Strategy Enables Nonflammable Electrolyte for Ultrahigh Voltage Lithium Metal Batteries
In battery electrolyte design principles, tuning Li+ solvation structure is an effective way to connect electrolyte chemistry with interfacial chemistry. Although recent proposed solvation tuning strategies are able to improve battery cyclability, a comprehensive strategy for electrolyte design remains imperative. Here, we report a solvation tuning strategy by utilizing molecular steric effect to create a "bulky coordinating" structure. Based on this strategy, the designed electrolyte generates an inorganic-rich solid electrolyte interphase (SEI) and cathode-electrolyte interphase (CEI), leading to excellent compatibility with both Li metal anodes and high-voltage cathodes. Under an ultrahigh voltage of 4.6 V, Li/NMC811 full-cells (N/P = 2.0) hold an 84.1% capacity retention over 150 cycles and industrial Li/NMC811 pouch cells realize an energy density of 495 Wh kg-1. This study provides innovative insights into Li+ solvation tuning for electrolyte engineering and offers a promising path toward developing high-energy Li metal batteries.
- 1 May 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (10) , 9586-9599
Tuning the Li+ Solvation Structure by a “Bulky Coordinating” Strategy Enables Nonflammable Electrolyte for Ultrahigh Voltage Lithium Metal Batteries
In battery electrolyte design principles, tuning Li+ solvation structure is an effective way to connect electrolyte chemistry with interfacial chemistry. Although recent proposed solvation tuning strategies are able to improve battery cyclability, a comprehensive strategy for electrolyte design remains imperative. Here, we report a solvation tuning strategy by utilizing molecular steric effect to create a "bulky coordinating" structure. Based on this strategy, the designed electrolyte generates an inorganic-rich solid electrolyte interphase (SEI) and cathode-electrolyte interphase (CEI), leading to excellent compatibility with both Li metal anodes and high-voltage cathodes. Under an ultrahigh voltage of 4.6 V, Li/NMC811 full-cells (N/P = 2.0) hold an 84.1% capacity retention over 150 cycles and industrial Li/NMC811 pouch cells realize an energy density of 495 Wh kg-1. This study provides innovative insights into Li+ solvation tuning for electrolyte engineering and offers a promising path toward developing high-energy Li metal batteries.