Jiale Song
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiale Song has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Xiangdong Xing
School of Metallurgical Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
2 shared publications - Donghui Wei
School of Metallurgical Engineering, Xi’an University of Architecture and Technology, Xi’an, People’s Republic of China
1 shared publication - Ke Ma
School of Metallurgical Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
1 shared publication - Ming Lv
School of Metallurgical Engineering Xi'an University of Architecture and Technology Xi'an Shaanxi 710055 China
1 shared publication - Penghui Guo
School of Metallurgical Engineering, Xi’an University of Architecture and Technology, Xi’an, People’s Republic of China
1 shared publication - Shan Ren
School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication
Latest Publications
- Open Access
Vanadium Extraction by Acid Leaching from Vanadium Slag Produced by Microwave-Assisted Calcification Roasting: Leaching Behavior and Optimization
Vanadium slag is an important secondary vanadium resource. Although microwave-assisted calcification roasting improves the leachability of vanadium-bearing phases, further extraction can still be limited during acid leaching, making optimization of the leaching process essential for efficient vanadium recovery. Using this slag, leaching was evaluated at different temperatures, times, liquid-to-solid ratios (L/S), sulfuric acid concentrations, and agitation speeds. A Box–Behnken design (BBD) was used to optimize leaching parameters within the selected ranges. Residue phase composition and microstructure were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). Leaching efficiency increased with temperature, L/S, and acid concentration, but plateaued above 60 °C, 6 mL·g−1, and 14 wt.%, respectively; increases beyond 50 min or 200 rpm gave marginal improvements. Analysis of variance (ANOVA) of the BBD model ranked the statistical effects of the four linear terms within the investigated BBD range as sulfuric acid concentration > L/S > leaching time > temperature. Within the selected BBD parameter ranges, optimization yielded 64.95 °C, 55.21 min, 6.56 mL·g−1, and 15.17 wt.% sulfuric acid, with agitation fixed at 200 rpm. Validation gave an average leaching efficiency of 92.92%, with a relative error of 0.205% compared with the model prediction. After leaching, Mn2V2O7 was undetected. The residue mainly contained irregular particles, 10–30 μm acicular or plate-like CaSO4·2H2O crystals, and minor residual vanadium-bearing CrVO3 and CaVH2Si4O12 phases. Surface CaSO4·2H2O deposition and refractory-phase encapsulation of vanadium-bearing constituents increased mass-transfer resistance and limited further leaching. This study clarified the relative effects of the investigated leaching conditions on vanadium leaching efficiency within the design range and the interactions among these conditions, and provided microstructural evidence related to the factors limiting further vanadium leaching, thereby providing theoretical guidance for the efficient extraction of vanadium from vanadium slag.
Open AccessVanadium Extraction by Acid Leaching from Vanadium Slag Produced by Microwave-Assisted Calcification Roasting: Leaching Behavior and Optimization
Vanadium slag is an important secondary vanadium resource. Although microwave-assisted calcification roasting improves the leachability of vanadium-bearing phases, further extraction can still be limited during acid leaching, making optimization of the leaching process essential for efficient vanadium recovery. Using this slag, leaching was evaluated at different temperatures, times, liquid-to-solid ratios (L/S), sulfuric acid concentrations, and agitation speeds. A Box–Behnken design (BBD) was used to optimize leaching parameters within the selected ranges. Residue phase composition and microstructure were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). Leaching efficiency increased with temperature, L/S, and acid concentration, but plateaued above 60 °C, 6 mL·g−1, and 14 wt.%, respectively; increases beyond 50 min or 200 rpm gave marginal improvements. Analysis of variance (ANOVA) of the BBD model ranked the statistical effects of the four linear terms within the investigated BBD range as sulfuric acid concentration > L/S > leaching time > temperature. Within the selected BBD parameter ranges, optimization yielded 64.95 °C, 55.21 min, 6.56 mL·g−1, and 15.17 wt.% sulfuric acid, with agitation fixed at 200 rpm. Validation gave an average leaching efficiency of 92.92%, with a relative error of 0.205% compared with the model prediction. After leaching, Mn2V2O7 was undetected. The residue mainly contained irregular particles, 10–30 μm acicular or plate-like CaSO4·2H2O crystals, and minor residual vanadium-bearing CrVO3 and CaVH2Si4O12 phases. Surface CaSO4·2H2O deposition and refractory-phase encapsulation of vanadium-bearing constituents increased mass-transfer resistance and limited further leaching. This study clarified the relative effects of the investigated leaching conditions on vanadium leaching efficiency within the design range and the interactions among these conditions, and provided microstructural evidence related to the factors limiting further vanadium leaching, thereby providing theoretical guidance for the efficient extraction of vanadium from vanadium slag.
- Open Access
Prediction of Silicon Content in the Hot Metal of a Blast Furnace Based on FPA-BP Model
In the process of blast furnace smelting, the stability of the hearth thermal state is essential. According to the analysis of silicon content in hot metal and its change trend, the operation status of the blast furnace can be judged to ensure the stable and smooth operation of the blast furnace. Based on the error back-propagation neural network (BP), the flower pollination algorithm (FPA) is used to optimize the weight and threshold of the BP neural network, and the prediction model of silicon content is established. At the same time, the principal component analysis method is used to reduce the dimension of the input sequence to obtain relevant indicators. The relevant indicators are used as the input, and silicon content in the hot metal is used as the output, which is substituted into the model for training and utilizes the trained model to predict. The results show that the hit rate of the prediction model is 16% higher than the non-optimized BP prediction model. At the same time, the evaluation indicators and operation speed of the model are improved compared with the BP prediction model, which can be more accurately applied to predict the silicon content of the hot metal.
Open AccessPrediction of Silicon Content in the Hot Metal of a Blast Furnace Based on FPA-BP Model
In the process of blast furnace smelting, the stability of the hearth thermal state is essential. According to the analysis of silicon content in hot metal and its change trend, the operation status of the blast furnace can be judged to ensure the stable and smooth operation of the blast furnace. Based on the error back-propagation neural network (BP), the flower pollination algorithm (FPA) is used to optimize the weight and threshold of the BP neural network, and the prediction model of silicon content is established. At the same time, the principal component analysis method is used to reduce the dimension of the input sequence to obtain relevant indicators. The relevant indicators are used as the input, and silicon content in the hot metal is used as the output, which is substituted into the model for training and utilizes the trained model to predict. The results show that the hit rate of the prediction model is 16% higher than the non-optimized BP prediction model. At the same time, the evaluation indicators and operation speed of the model are improved compared with the BP prediction model, which can be more accurately applied to predict the silicon content of the hot metal.