Haiwang Wang
Research Subjects
Haiwang Wang has a total of 101 co-authors. Here are the top co-authors by number of shared publications:
Xinfang Wei
Hebei Provincial Laboratory for Dielectric and Electrolyte Materials, Northeastern University at Qinhuangdao, Qinhuangdao, P. R. China
8 shared publications- Xiwei Qi
School of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang, China
7 shared publications Jinlong Li
Hebei Provincial Laboratory for Dielectric and Electrolyte Materials, Northeastern University at Qinhuangdao, Qinhuangdao, P. R. China
6 shared publicationsLi Chao
Hebei Provincial Laboratory for Dielectric and Electrolyte Materials, Northeastern University at Qinhuangdao, Qinhuangdao, P. R. China
6 shared publications- Bingzhu Wang
Dalian University of Technology
5 shared publications Guanqi Wang
School of Resources and Materials, Northeastern University at Qinhuangdao, Qinhuangdao, Hebei 066004, P. R. China
5 shared publications
Latest Publications
- Open Access
- 1 July 2025
- Published by Tsinghua University Press in Friction
- Vol. 13 (8)
IPN-PUA: An ultra-low density self-lubricating composite with IPN structure–liquid lubricant coupling mechanism
The goal of net zero carbon emission is of a great concern to energy conservation and emission reduction. In aerospace and other industrial fields, one of main energy consumption forms is the friction between the motion pairs despite that energy consumption caused by equipment mass cannot be ignored. Therefore, ultra-low density self-lubricating composites with interpenetrating network (IPN) structure-liquid lubricant coupling mechanism is designed and prepared in this work to meet the pressing requirement of energy saving and emission reduction. The liquid lubricant is in situ locked into polyurethane acrylate (PUA) IPN structures (IPN-PUA structures). The thermodynamic, mechanical, and tribological properties, as well as the density-friction comprehensive properties of the material with IPN-PUA structures was studied. After locking the liquid lubricant into IPN-PUA structures, the material possesses not only excellent self-lubricating properties but also good micro-mechanical properties with the coefficient of friction (COF) of 0.0938, the wear rate of 6.58×10-15 m3/(N•m) and nanoindentation modulus of 4.5 GPa. Such composite materials also possess an ultra-low density of 1.107g/cm3, which contributes to their excellent versatile self-lubrication and low-density characteristics when compared with other polymeric materials.
- 1 July 2025
- Published by Tsinghua University Press in Friction
- Vol. 13 (8)
Open AccessIPN-PUA: An ultra-low density self-lubricating composite with IPN structure–liquid lubricant coupling mechanism
The goal of net zero carbon emission is of a great concern to energy conservation and emission reduction. In aerospace and other industrial fields, one of main energy consumption forms is the friction between the motion pairs despite that energy consumption caused by equipment mass cannot be ignored. Therefore, ultra-low density self-lubricating composites with interpenetrating network (IPN) structure-liquid lubricant coupling mechanism is designed and prepared in this work to meet the pressing requirement of energy saving and emission reduction. The liquid lubricant is in situ locked into polyurethane acrylate (PUA) IPN structures (IPN-PUA structures). The thermodynamic, mechanical, and tribological properties, as well as the density-friction comprehensive properties of the material with IPN-PUA structures was studied. After locking the liquid lubricant into IPN-PUA structures, the material possesses not only excellent self-lubricating properties but also good micro-mechanical properties with the coefficient of friction (COF) of 0.0938, the wear rate of 6.58×10-15 m3/(N•m) and nanoindentation modulus of 4.5 GPa. Such composite materials also possess an ultra-low density of 1.107g/cm3, which contributes to their excellent versatile self-lubrication and low-density characteristics when compared with other polymeric materials.
- Top Cited PapersOpen Access
- 31 March 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (7) , 524
Rich Oxygen Vacancies in Bimetallic MnCo2O4.5 Spheres for Enhancing Lean Methane Catalytic Oxidation
Methane is the second most prevalent greenhouse gas after carbon dioxide in global climate change, and catalytic oxidation technology is a very effective way to eliminate methane. However, the high reaction temperature of methane catalytic oxidation is an urgent problem that needs to be solved. In this work, a series of MnCo2O4.5 catalysts were prepared using carbon spheres as templates, combined with metal ion adsorption and calcination processes. Excitingly, the catalytic oxidation activity of MnCo2O4.5 spherical catalyst with irregular nanoparticles on the surface for lean methane (T90 = 395 °C) is higher than that of pure phase Co3O4 (T90 = 538 °C) and Mo3O4 (T90 = 581 °C) spherical catalysts and even surpasses most precious metal catalysts. The main reasons are as follows: (1) The spherical core with irregular nanoparticle morphology significantly increases the specific surface area, creating abundant active sites; (2) through the optimized distribution of oxygen vacancies, rapid oxygen migration through this structure can quickly enter the catalytic zone; (3) the hierarchical wall structure expands the interface and provides spatial accommodation for the catalytic process. Meanwhile, the structure of the ball wall further expands the reaction interface, providing sufficient space for the occurrence of reactions. Rich and highly active oxygen vacancies are evenly distributed on the surface and inside of the ball. The extraordinary performance of low-temperature methane combustion catalysts has opened a promising new path, which is expected to inject strong impetus into the global energy transition and environmental protection.
- 31 March 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (7) , 524
Top Cited PapersOpen AccessRich Oxygen Vacancies in Bimetallic MnCo2O4.5 Spheres for Enhancing Lean Methane Catalytic Oxidation
Methane is the second most prevalent greenhouse gas after carbon dioxide in global climate change, and catalytic oxidation technology is a very effective way to eliminate methane. However, the high reaction temperature of methane catalytic oxidation is an urgent problem that needs to be solved. In this work, a series of MnCo2O4.5 catalysts were prepared using carbon spheres as templates, combined with metal ion adsorption and calcination processes. Excitingly, the catalytic oxidation activity of MnCo2O4.5 spherical catalyst with irregular nanoparticles on the surface for lean methane (T90 = 395 °C) is higher than that of pure phase Co3O4 (T90 = 538 °C) and Mo3O4 (T90 = 581 °C) spherical catalysts and even surpasses most precious metal catalysts. The main reasons are as follows: (1) The spherical core with irregular nanoparticle morphology significantly increases the specific surface area, creating abundant active sites; (2) through the optimized distribution of oxygen vacancies, rapid oxygen migration through this structure can quickly enter the catalytic zone; (3) the hierarchical wall structure expands the interface and provides spatial accommodation for the catalytic process. Meanwhile, the structure of the ball wall further expands the reaction interface, providing sufficient space for the occurrence of reactions. Rich and highly active oxygen vacancies are evenly distributed on the surface and inside of the ball. The extraordinary performance of low-temperature methane combustion catalysts has opened a promising new path, which is expected to inject strong impetus into the global energy transition and environmental protection.
- Top Cited Papers
- 7 March 2025
- Published by Elsevier in Advances in Colloid and Interface Science
- Vol. 340, 103470
Smart hydrogel: A new platform for cancer therapy
- 7 March 2025
- Published by Elsevier in Advances in Colloid and Interface Science
- Vol. 340, 103470
Top Cited PapersSmart hydrogel: A new platform for cancer therapy
- 6 June 2024
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 672, 497-511
Design and construction of high strength double network hydrogel with flow-induced orientation
- 6 June 2024
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 672, 497-511
Design and construction of high strength double network hydrogel with flow-induced orientation
- 13 December 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (4) , 2349-2358
Defect dipoles and stable dielectric properties improve Nb-doped Ba 0.7 Sr 0.3 TiO 3 photocatalytic H 2 evolution activity
To enhance the photocatalytic hydrogen evolution reaction (HER) activity and stability of barium–strontium–titanate (Ba0.7Sr0.3TiO3, BST), niobium (Nb5+) donor doped BST (Ba0.7Sr0.3Ti1−xNbxO3) photocatalysts were synthesized via a sol–gel assisted solid phase method. It was found that the introduction of Nb5+ expands the lattice and impedes grain growth. In the mechanism of enhancing photocatalytic performance, on one hand, the doped Nb5+ ions generate two types of defects in the lattice of BST, which form defect dipoles to impede electron–hole recombination and improve the stability of photocatalytic performance. On the other hand, the temperature stability test of the dielectric constant shows that appropriate doping of Nb5+ ions will enhance the stability of carrier concentration in BST, thereby exhibiting superior HER activity. In terms of band structure, experiments and Density Functional Theory (DFT) confirmed that the doping of trace amounts of Nb5+ has a very weak influence on the band structure. Additionally, the photocatalytic hydrogen evolution of 1% Nb doped Ba0.7Sr0.3TiO3 was 16.2% higher than that of Ba0.7Sr0.3TiO3.
- 13 December 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (4) , 2349-2358
Defect dipoles and stable dielectric properties improve Nb-doped Ba 0.7 Sr 0.3 TiO 3 photocatalytic H 2 evolution activity
To enhance the photocatalytic hydrogen evolution reaction (HER) activity and stability of barium–strontium–titanate (Ba0.7Sr0.3TiO3, BST), niobium (Nb5+) donor doped BST (Ba0.7Sr0.3Ti1−xNbxO3) photocatalysts were synthesized via a sol–gel assisted solid phase method. It was found that the introduction of Nb5+ expands the lattice and impedes grain growth. In the mechanism of enhancing photocatalytic performance, on one hand, the doped Nb5+ ions generate two types of defects in the lattice of BST, which form defect dipoles to impede electron–hole recombination and improve the stability of photocatalytic performance. On the other hand, the temperature stability test of the dielectric constant shows that appropriate doping of Nb5+ ions will enhance the stability of carrier concentration in BST, thereby exhibiting superior HER activity. In terms of band structure, experiments and Density Functional Theory (DFT) confirmed that the doping of trace amounts of Nb5+ has a very weak influence on the band structure. Additionally, the photocatalytic hydrogen evolution of 1% Nb doped Ba0.7Sr0.3TiO3 was 16.2% higher than that of Ba0.7Sr0.3TiO3.
- Open Access
- 6 March 2023
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 13 (8) , 2566-2584
Advancement of modification engineering in lean methane combustion catalysts based on defect chemistry
This review takes defect chemistry as the starting point and the improvement of material properties as the foothold, and puts forward insights on the application, limitation and prospect of defect engineering in the modification of methane combustion catalysts.
- 6 March 2023
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 13 (8) , 2566-2584
Open AccessAdvancement of modification engineering in lean methane combustion catalysts based on defect chemistry
This review takes defect chemistry as the starting point and the improvement of material properties as the foothold, and puts forward insights on the application, limitation and prospect of defect engineering in the modification of methane combustion catalysts.
- Open Access
- 18 November 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (22) , 4065
A Review on the Application of Cobalt-Based Nanomaterials in Supercapacitors
Among many electrode materials, cobalt-based nanomaterials are widely used in supercapacitors because of their high natural abundance, good electrical conductivity, and high specific capacitance. However, there are still some difficulties to overcome, including poor structural stability and low power density. This paper summarizes the research progress of cobalt-based nanomaterials (cobalt oxide, cobalt hydroxide, cobalt-containing ternary metal oxides, etc.) as electrode materials for supercapacitors in recent years and discusses the preparation methods and properties of the materials. Notably, the focus of this paper is on the strategies to improve the electrochemical properties of these materials. We show that the performance of cobalt-based nanomaterials can be improved by designing their morphologies and, among the many morphologies, the mesoporous structure plays a major role. This is because mesoporous structures can mitigate volume changes and improve the performance of pseudo capacitance. This review is dedicated to the study of several cobalt-based nanomaterials in supercapacitors, and we hope that future scholars will make new breakthroughs in morphology design.
- 18 November 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (22) , 4065
Open AccessA Review on the Application of Cobalt-Based Nanomaterials in Supercapacitors
Among many electrode materials, cobalt-based nanomaterials are widely used in supercapacitors because of their high natural abundance, good electrical conductivity, and high specific capacitance. However, there are still some difficulties to overcome, including poor structural stability and low power density. This paper summarizes the research progress of cobalt-based nanomaterials (cobalt oxide, cobalt hydroxide, cobalt-containing ternary metal oxides, etc.) as electrode materials for supercapacitors in recent years and discusses the preparation methods and properties of the materials. Notably, the focus of this paper is on the strategies to improve the electrochemical properties of these materials. We show that the performance of cobalt-based nanomaterials can be improved by designing their morphologies and, among the many morphologies, the mesoporous structure plays a major role. This is because mesoporous structures can mitigate volume changes and improve the performance of pseudo capacitance. This review is dedicated to the study of several cobalt-based nanomaterials in supercapacitors, and we hope that future scholars will make new breakthroughs in morphology design.
- Open Access
- 14 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (12) , 2042
A Review of Cobalt-Containing Nanomaterials, Carbon Nanomaterials and Their Composites in Preparation Methods and Application
With the increasing demand for sustainable and green energy, electric energy storage technologies have received enough attention and extensive research. Among them, Li-ion batteries (LIBs) are widely used because of their excellent performance, but in practical applications, the electrochemical performance of electrode materials is not satisfactory. Carbon-based materials with high chemical stability, strong conductivity, high specific surface area, and good capacity retention are traditional anode materials in electrochemical energy storage devices, while cobalt-based nano-materials have been widely used in LIBs anodes because of their high theoretical specific capacity. This paper gives a systematic summary of the state of research of cobalt-containing nanomaterials, carbon nanomaterials, and their composites in LIBs anodes. Moreover, the preparation methods of electrode materials and measures to improve electrochemical performance are also summarized. The electrochemical performance of anode materials can be significantly improved by compounding carbon nanomaterials with cobalt nanomaterials. Composite materials have better electrical conductivity, as well as higher cycle ability and reversibility than single materials, and the synergistic effect between them can explain this phenomenon. In addition, the electrochemical performance of materials can be significantly improved by adjusting the microstructure of materials (especially preparing them into porous structures). Among the different microscopic morphologies of materials, porous structure can provide more positions for chimerism of lithium ions, shorten the diffusion distance between electrons and ions, and thus promote the transfer of lithium ions and the diffusion of electrolytes.
- 14 June 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (12) , 2042
Open AccessA Review of Cobalt-Containing Nanomaterials, Carbon Nanomaterials and Their Composites in Preparation Methods and Application
With the increasing demand for sustainable and green energy, electric energy storage technologies have received enough attention and extensive research. Among them, Li-ion batteries (LIBs) are widely used because of their excellent performance, but in practical applications, the electrochemical performance of electrode materials is not satisfactory. Carbon-based materials with high chemical stability, strong conductivity, high specific surface area, and good capacity retention are traditional anode materials in electrochemical energy storage devices, while cobalt-based nano-materials have been widely used in LIBs anodes because of their high theoretical specific capacity. This paper gives a systematic summary of the state of research of cobalt-containing nanomaterials, carbon nanomaterials, and their composites in LIBs anodes. Moreover, the preparation methods of electrode materials and measures to improve electrochemical performance are also summarized. The electrochemical performance of anode materials can be significantly improved by compounding carbon nanomaterials with cobalt nanomaterials. Composite materials have better electrical conductivity, as well as higher cycle ability and reversibility than single materials, and the synergistic effect between them can explain this phenomenon. In addition, the electrochemical performance of materials can be significantly improved by adjusting the microstructure of materials (especially preparing them into porous structures). Among the different microscopic morphologies of materials, porous structure can provide more positions for chimerism of lithium ions, shorten the diffusion distance between electrons and ions, and thus promote the transfer of lithium ions and the diffusion of electrolytes.
- 16 June 2021
- Published by Wiley in ChemistrySelect
- Vol. 6 (23) , 5719-5728
Study on Microstructure and Photocatalytic Mechanism of g‐C 3 N 4 /WO 3 Heterojunctions Prepared by Ice Template
For semiconductor photocatalyst, such as g‐C 3 N 4 /WO 3 , heterojunction contact area and specific surface area are the main reasons that limit their photocatalytic activity. Simultaneously, the photogenerated electron‐hole transport mechanism of g‐C 3 N 4 /WO 3 is still controversial. In this article, g‐C 3 N 4 /WO 3 semiconductor photocatalysts were synthesized by ice template method. XRD, SEM, BET, etc. were used to characterize the microstructure and morphology of g‐C 3 N 4 /WO 3 with different quality scores of WO 3 , and it was found that the specific surface area of 10 wt% g‐C 3 N 4 /WO 3 reached 54.8 m 2 /g, which was 1.92 times that of g‐C 3 N 4 . The photocatalytic performance of semiconductor photocatalysts was measured by photolysis of aquatic hydrogen and degradation of RhB solution. The results show that the cumulative hydrogen production of 10 wt% g‐C 3 N 4 /WO 3 is 780.11 μmol/g, which is 27.5 % higher than that of g‐C 3 N 4 . Simultaneously, the degradation rate of the g‐C 3 N 4 /WO 3 composite material to Rhodamine B solution is 4.27 times that of g‐C 3 N 4 . The mechanism of electron hole separation was obtained by EPR, and it is proved that g‐C 3 N 4 /WO 3 composite material constructs Z‐type heterojunction.
- 16 June 2021
- Published by Wiley in ChemistrySelect
- Vol. 6 (23) , 5719-5728
Study on Microstructure and Photocatalytic Mechanism of g‐C 3 N 4 /WO 3 Heterojunctions Prepared by Ice Template
For semiconductor photocatalyst, such as g‐C 3 N 4 /WO 3 , heterojunction contact area and specific surface area are the main reasons that limit their photocatalytic activity. Simultaneously, the photogenerated electron‐hole transport mechanism of g‐C 3 N 4 /WO 3 is still controversial. In this article, g‐C 3 N 4 /WO 3 semiconductor photocatalysts were synthesized by ice template method. XRD, SEM, BET, etc. were used to characterize the microstructure and morphology of g‐C 3 N 4 /WO 3 with different quality scores of WO 3 , and it was found that the specific surface area of 10 wt% g‐C 3 N 4 /WO 3 reached 54.8 m 2 /g, which was 1.92 times that of g‐C 3 N 4 . The photocatalytic performance of semiconductor photocatalysts was measured by photolysis of aquatic hydrogen and degradation of RhB solution. The results show that the cumulative hydrogen production of 10 wt% g‐C 3 N 4 /WO 3 is 780.11 μmol/g, which is 27.5 % higher than that of g‐C 3 N 4 . Simultaneously, the degradation rate of the g‐C 3 N 4 /WO 3 composite material to Rhodamine B solution is 4.27 times that of g‐C 3 N 4 . The mechanism of electron hole separation was obtained by EPR, and it is proved that g‐C 3 N 4 /WO 3 composite material constructs Z‐type heterojunction.