MSMarco Sandroni

Marco Sandroni

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marco Sandroni has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Posidonia oceanica Leaves as a Natural Filler for Poly(Butylene Succinate‐Co‐Adipate) Composites: Characterization and Biodegradation Assessment in Seawater

    by Chiara Pedrotti, Damiano Rossi, Giovanni Raimondi, Riccardo Gallorini, Miriam Cappello, Irene Anguillesi, Marco Sandroni, Patrizia Cinelli, Maurizia Seggiani

    This study investigates the use of Posidonia oceanica ( PO ) leaves, derived from coastal banquette residues, as a filler in PBSA, aiming to valorise a natural biomass typically treated as waste within a circular materials approach, while reducing production costs and enhancing seawater biodegradation of the polymer matrix. Composites containing 5 and 10 wt.% of PO, with and without micro‐talc, were prepared via extrusion and injection molding. Materials were characterized morphologically, chemically, thermally, and mechanically, while biodegradation was assessed in a controlled seawater environment. Thermal analyses confirm that both PO and micro‐talc do not compromise PBSA thermal stability, with degradation temperatures remaining at approximately 403°C. Calorimetric results highlighted an increment of crystallization temperature and the appearance of a secondary melting peak at ~79°C, while the main PBSA melting peak remains at ~85°C and overall crystallinity degree is unchanged. Chemical and morphological analyses reveal no chemical interactions and confirm homogeneous filler dispersion with good interfacial adhesion. Mechanical testing shows a moderate stiffening and embrittling effect with the addition of PO, with elastic modulus increasing from 0.32 to 0.51 GPa and elongation at break decreasing from 450% to 325%, while impact toughness is markedly reduced at high filler loadings. Seawater exposure demonstrates accelerated biodegradation for Posidonia‐filled composites, showing a ~20% mass loss after 4 months and rapid mechanical deterioration. The incorporation of PO fillers constitutes an effective approach to modulate and accelerate degradation under marine conditions.


  • Open Access

    Valorisation of Red Gypsum Waste in Polypropylene Composites for Agricultural Applications

    by Chiara Pedrotti, Damiano Rossi, Marco Sandroni, Irene Anguillesi, Chiara Riccardi, Pietro Leandri, Miriam Cappello, Sara Filippi, Patrizia Cinelli, Massimo Losa, et al.

    This study investigates the industrial potential of red gypsum (RG), a major by-product of titanium dioxide (TiO2) production, for the development of thermoplastic polypropylene (PP)-based composites via melt extrusion, targeting agricultural applications. Prior to compounding, RG was thermally treated at approximately 200 °C to remove residual moisture and chemically bound water, resulting in its anhydrous form (CaSO4). PP/RG composites were then formulated with RG loadings up to 20 wt.%, employing stearic acid (SA) as a compatibilizer. The resulting materials were thoroughly characterized and successfully processed through industrial-scale injection molding up to 250 °C. Morphological and FTIR analyses confirmed the role of SA in enhancing both filler dispersion and interfacial adhesion between RG and the PP matrix. SEM images revealed finer and more uniformly distributed RG particles, resulting in a reduced loss of ductility and elongation at break typically associated with filler addition. Specifically, the Young’s Modulus increased from 1.62 GPa (neat PP) up to 3.21 GPa with 20 wt.% RG and 0.6 wt.% SA. The addition of 0.6 wt.% SA also helped limit the reduction in stress at break from 46.68 MPa (neat PP) to 34.05 MPa and similarly mitigated the decrease in Charpy impact energy, which declined slightly from 2.66 kJ/m2 (neat PP) to 2.24 kJ/m2 for composites containing 20 wt.% RG. Preliminary phytotoxicity was assessed using germination tests on Lepidium sativum L. seeds. Eluates from both untreated and SA-treated RG powders resulted in germination indices below 80%, indicating phytotoxicity likely due to high sulfate ion concentrations. In contrast, eluates from composite pellets exhibited germination indices equal to or exceeding 100%, demonstrating the absence of phytotoxic effects. These results highlight the suitability of the developed composites for applications in floriculture and horticulture. The optimized composite pellets were successfully processed via injection molding to manufacture plant pots, which exhibited a dark brown coloration, confirming the effective pigmenting function of RG. These results demonstrate the potential of red gypsum to serve both as a functional filler and pigment in PP composites, providing a sustainable alternative to iron oxide pigments and promoting the valorization of industrial waste through resource recovery.


  • Open Access

    Valorising Insect Exoskeleton Biomass Filler in Bioplastic-Based Eco-Friendly Rigid Items for Agriculture Applications

    by Norma Mallegni, Vito Gigante, Steven Verstichel, Marco Sandroni, Neetu Malik, Miriam Cappello, Damiano Rossi, Sara Filippi, Andrea Lazzeri, Maurizia Seggiani, et al.

    In this work, by-products from insect farming valorisation are proposed as filler in biocomposite production, with relevant biodegradation in compost and valuable thermal and mechanical properties. Thus, we report on the preparation, properties, and biodegradability in compost of composites based on Poly(butylene succinate-co-adipate) (PBSA) and Poly(3-hydroxybutyrate-3-hydroxyvalerate) (PHB-HV) (70/30% by weight as a polymeric matrix, with filler from insect exoskeleton (I) up to 15% by weight in the 85% by weight of polymeric matrix. The insect biomass was a by-product obtained from grinding the insect’s post-protein extraction dry exoskeleton. The composites were produced by melt extrusion and characterised in terms of processability, thermal stability, morphology, and mechanical properties to select formulations optimised for injection moulding processing. The optimised composites (PBSA/PHB-HV) with 15% by weight of filler were used to produce pots by injection moulding on an industrial scale extruder. Selected formulations were tested for biodegradability in compost, which evidenced the relevance of insect exoskeleton filler for meeting the requirements for the disintegration of rigid items. This paper presents a sustainable option for valorising the insect exoskeleton residue that remained after protein extraction for animal feed production and reducing the production cost of PBSA/PHB-HV-based composites without compromising the mechanical properties for application as rigid items in agriculture, all while promoting biodegradability in industrial compost.


  • Open Access

    Harnessing Insect Exoskeletons Biomass-Embedded Plastics for Eco-Friendly Rigid Items for Agriculture Applications

    by Norma Mallegni, Vito Gigante, Steven Verstichel, Marco Sandroni, Neetu Malik, Miriam Cappello, Damiano Rossi, Sara Filippi, Andrea Lazzeri, Maurizia Seggiani, et al.

    In this work are reported preparation, properties and biodegradability in different environments of composites based on Poly (butylene succinate-co-adipate) (PBSA) and Poly(3-hydroxybutyrate-3-hydroxyvalerate) (PHB-HV) as polymeric matrix, with filler from insect exoskeleton (I), a by-product obtained from grinding the insect’s post-protein extraction dry biomass. The composites were produced by melt extrusion and characterized in terms of processability, thermal stability, morphology, and me-chanical properties to select formulations optimized for injection moulding processing. The optimised composites (PBSA/PHB-HV) with different amounts of insect filler (I) were used to produce pots by injection moulding. Selected formulations were tested for biodegradability in compost, home compost and soil. This study presents a sustainable option for valorising the insect exoskeleton residue remaining after protein extraction for animal feed production, and reducing the production cost of PBSA/PHB-HV based composites without compromising mechanical properties for application as rigid items in agriculture, while promoting biodegradability in industrial compost.

  • Open Access

    Improvement of Interfacial Adhesion and Thermomechanical Properties of PLA Based Composites with Wheat/Rice Bran

    by Vito Gigante, Laura Aliotta, Ilaria Canesi, Marco Sandroni, Andrea Lazzeri, Maria-Beatrice Coltelli, Patrizia Cinelli

    The present work aims to enhance the use of agricultural byproducts for the production of bio-composites by melt extrusion. It is well known that in the production of such bio-composites, the weak point is the filler-matrix interface, for this reason the adhesion between a polylactic acid (PLA)/poly(butylene succinate)(PBSA) blend and rice and wheat bran platelets was enhanced by a treatment method applied on the fillers using a suitable beeswax. Moreover, the coupling action of beeswax and inorganic fillers (such as talc and calcium carbonate) were investigated to improve the thermo-mechanical properties of the final composites. Through rheological (MFI), morphological (SEM), thermal (TGA, DSC), mechanical (Tensile, Impact), thermomechanical (HDT) characterizations and the application of analytical models, the optimum among the tested formulations was then selected.


  • Open Access

    On the Use of Paper Sludge as Filler in Biocomposites for Injection Moulding

    by Vito Gigante, Patrizia Cinelli, Marco Sandroni, Roberto D’ambrosio, Andrea Lazzeri, Maurizia Seggiani

    The potential use of paper sludge (PS) as filler in the production of bio-composites based on poly lactic acid (PLA) and polybutylene adipate terephthalate (PBAT) was investigated. PS/PLA/PBAT composites, with addition of acetyl tributyl citrate (ATBC) as biobased plasticizer, were produced with PS loadings up to 30 wt.% by twin-screw extrusion followed by injection moulding. The composites were characterized by rheological measurements, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and mechanical tests (tensile and impact resistance) to study the effect of PS on the processability, thermal stability, crystallinity and mechanical performance of polymeric matrix. The optimized composites at higher PS content were successfully processed to produce pots for horticulture and, in view of this application, preliminary phytotoxicity tests were conducted using the germination test on Lepidium sativum L. seeds. Results revealed that developed composites up to 30 wt.% PS had good processability by extrusion and injection moulding showing that PS is a potential substitute of calcium carbonate as filler in the production of bio-composites, and the absence of phytotoxic effects showed the possibility of their use in the production of pots/items for applications in floriculture and/or horticulture.


  • Open Access

    Overview of Agro-Food Waste and By-Products Valorization for Polymer Synthesis and Modification for Bio-Composite Production

    by Patrizia Cinelli, Maurizia Seggiani, Maria Beatrice Coltelli, Serena Danti, Maria Cristina Righetti, Vito Gigante, Marco Sandroni, Francesca Signori, Andrea Lazzeri

    The increase in the world’s economic growth and global population requires a more efficient management of the Earth’s natural resources. The combined plastic and food sector forms an important part of the EU economy, accounting for 15 million jobs. Unlocking the innovation potential in the field of packaging and cosmetics will significantly contribute to job creation and competitiveness. Sustainable synthesis of polyhydroxyalkanaotes from agro-food by-products as well as synthesis of lactic acid co-polymers constitute a pathway to achieving sustainable polymeric matrices. Natural fibers, as well as polysaccharides (starch, cellulose, chitin, chitosan), cutin, and protein rich by-products, are abundantly available from the agro-food industry. Natural fibers may be modified chemically with enzymes or by treating their surface with natural waxes, with a significant improvement in adhesion and impact resistance. An overview on the availability, collection, treatment, and approach of valorization of largely available agro-food waste biomass for both polymer and biocomposite production is hereby reported, with examples of case studies and product developed in our research units, such as sustainable pots, rigid containers, active films, and non-woven tissue.