CECengiz Eldem

Cengiz Eldem

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cengiz Eldem has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Analysis of the Technical and Operational Development of Unmanned Ground Vehicles Worldwide

    by Cüneyd Demir, Cengiz Eldem

    Unmanned Ground Vehicles (UGVs) are one of the most prominent elements of the technological revolution that has been occurring in the defense sector over the past few years. The advent of asymmetric warfare, high-risk operational areas and the requirement for air platforms to operate with low human numbers has fueled the evolution of ground platforms for a variety of mission profiles. This study explores the different types of UGVs developed by countries in recent years based on technical and structural aspects. The mission types, locomotion configurations, power train systems, dimensions, weights, maximum speeds and operational endurance of the vehicles were comparatively evaluated. Platforms of the UGVs that are produced in some countries such as the United States, Germany, China, Russia, Estonia, Ukraine, Serbia and Türkiye were analyzed in this study. The results showed that for small-scale reconnaissance and surveillance vehicles, electric powered, lightweight wheeled systems are the predominant choice while heavy-duty vehicles such as assault and logistics vehicles are mostly hybrid or diesel powered tracked. The use of hybrid propulsion systems has increased due to the need for longer endurance and greater payload capacity for operational requirements. It was also found that there are big differences between the development methods of different countries. Where the United States is interested in platforms that are modular and can be adapted to specific missions, Russia is interested in heavily armed combat systems. China, on the other hand, concentrates on product diversity and cost-effective solutions. Türkiye has made outstanding strides in the development of medium and heavy class UGVs fitted with hybrid propulsion systems, assault and reconnaissance capabilities, and logistics capabilities, since 2018. The study finds that UGVs are progressing from remotely operated systems to artificial intelligence powered, modular, low-signature, multi-mission autonomous systems. Moreover, it is projected that swarm technologies, human–unmanned teaming, artificial intelligence-driven decision-making processes and hybrid energy technologies will be major contributors to the future designs and capabilities of UGVs.

  • Open Access

    Bir Uçağın Burun İniş Takımı Parçasının Yapısal Analizi ve Malzeme Seçimi

    by Emre Şahin, Cengiz Eldem

    Bir hava aracının iniş takımı en önemli parçalarından birisidir. Uçağın iniş anında uçak üzerindeki yükleri dengelemesi, tekerleri aracılığıyla darbeleri sönümleyip, uçağın güvenli bir şekilde yere inip taksi yapabilmesi için gerekli görev elemanlarının başında gelmektedir. İniş takımları bir uçağın ömrü boyunda en çok yüke maruz kalacak parçalarından birisidir. Düşük hacim, yüksek dayanım, uzun ömür ve iyi performans sağlayabilmesi için doğru analiz edilmiş ve tasarlanmış olması gerekmektedir. İniş takımları burun iniş takımı ve ana iniş takımları olmak üzere ikiye ayrılır. İniş takımları tipine göre farklı alt parçalardan meydana gelmektedir. Bu çalışmada CATIA V5 programında tasarlanan burun iniş takımı parçalarından olan tork iletim parçası için farklı malzemelerdeki dayanımı hesaplanan yükler ile analiz edilmiş olup sonuçlardaki farklılıklar incelenmiştir. ANSYS Workbench programında tamamlanan analiz çalışmasında farklı malzemeler kullanıldığında oluşan gerilme ve deformasyon sonuçları karşılaştırılarak tasarım için uygun olan malzemeler belirlenmiştir. Analizlerde PH13-7 Mo çeliği, Titanyum Ti-6Al-4V, Alüminyum 7075 alaşımı, 15-5 PH çeliği ve AISI 4340 çelik malzemeleri kullanılarak elde edilen sonuçlardaki deformasyon ve gerilme değerleri incelenmiştir.

  • Open Access

    UNMANNED GROUND VEHICLE SELECTION WITH ARTIFICIAL NEURAL NETWORKS

    by Cüneyd Demir, Cengiz Eldem, Mustafa Bozdemir

    In recent years, there has been significant progress in defense systems in response to the increasing demands of countries. Particularly, advancements in unmanned aerial vehicles have reached a notable level for our country. However, it is a necessity of war strategies that ground operations follow every air operation. At this point, the importance of unmanned ground vehicles (UGVs), a very critical technology, becomes evident. Unmanned Ground Vehicles (UGVs) are used in place of soldiers for dangerous tasks such as reconnaissance, surveillance and intelligence, attack and rear security, bomb disposal, logistics, and mine clearing. Therefore, they help reduce military casualties and secure dominance on the field. In this study, a selection program is intended to be developed to determine the purpose for which unmanned ground vehicles for military use will be employed. Based on the operating principles of the unmanned ground vehicle, the basic mechanical systems have been identified. Subsequently, a design catalog containing these basic mechanical systems has been created. The desired features of the unmanned ground vehicle (UGV) to be used in the field were asked of the customer, and the most suitable unmanned ground vehicle was determined using an artificial neural networks algorithm based on the responses received.


  • Open Access

    INVESTIGATION OF THE AUXETIC BEHAVIOR OF AN ORIGINAL LATTICE STRUCTURE DESIGN

    by Nuriye Nur Kaya, Cengiz Eldem, İhsan Toktas

    Auxetic structures are special structures with negative Poisson's ratio due to their geometric shapes in their internal structure. When tensile force is applied to these structures, transverse and longitudinal expansions are observed, while transverse and longitudinal contractions are observed when compressive force is applied. There are many different unit cell designs such as chiral, arrowhead, re-entrant in auxetic structures. In this study, a unique cell design was studied and the behavior of an auxetic lattice structure was investigated. The lattice structure designed with different geometric thicknesses and different matrices was analyzed with the finite element analysis program and found to have a negative Poisson's ratio. In the designed lattice structure, the structure with 4×4 matrix and 3 mm geometric thickness was found to have the best negative Poisson's ratio.


  • Open Access

    Ergonomic Analysis of Operator Consoles on Air Support Aircraft

    by İbRahim Mert Kiliç, Cengiz Eldem, Neslihan Top, Oğulcan Eren, İsMail Şahi̇n

    The Digital Human Modelling (DHM) method, in which the anthropometric characteristics of humans are represented using a computer-aided three-dimensional model, is used in many different ergonomic optimisation applications, especially in areas such as manufacturing, machine utilization, assembly simulation, cabin design, human-robot communication. This method aims to identify and reduce potential ergonomic risks in posture and work positions during the design phase by simulating human-machine interactions in digital environments.Thus, possible injuries and injuries can be prevented. Especially in critical aviation applications where operator safety is vital, functionality and ergometry analyzes are important in cockpit and console designs. In this study, ergonomic analyzes of the operator consoles in an air support aircraft were carried out according to the Rapid Entire Body Assessment (REBA) and Rapid Upper Limb Assessment (RULA) methods, according to two different postures, using the Human Builder and Human Activity Analysis modules in the CATIA V5 sofware. In Position-1, the operator's situation of directly looking at the screen and reaching for the screen buttons is considered, while in Position-2, the operator's situation of reaching for the tablet located on the side and looking at the screen below has been evaluated from an ergonomic perspective. Additionally, angle of view analyses have been performed for these two postural positions.

  • EXAMINATION OF A WEARABLE EXOSKELETON WITH ERGONOMIC ANALYSIS METHODS

    by Kağan ERTAN, Cengiz Eldem

    Üretim sürecinin birçok aşamasında, çalışanlar azami derecede ergonomiye ihtiyaç duymaktadır. Özellikle, baş seviyesi üzerinde gerçekleştirilmesi gereken çalışmalar bunların en iyi örneklerini oluşturur. Bu çalışmada üretim hattında çalışan işçilerin montaj esnasında karşılaşacağı zorlanmaları seviyelendirmek, bu seviyelendirmelere göre tasarımda değişiklikler yapmak ve tasarımda yeniliklerin yapılması amaçlanmaktadır. Çalışmanın amacı doğrultusunda toplanan veriler dikkate alınarak giyilebilir bir dış iskeletin ergonomik analizleri yapılmıştır. REBA ve RULA yöntemi kullanılarak yapılan bu analizlerle geliştirilmesi gereken parametreler belirlenmektedir. Böylece ergonomik açıdan daha iyi çalışma şartlarının oluşturulması sağlanabilecektir. Ayrıca giyilebilir dış iskelette gerçekleştirilecek iyileştirmelerin, vücudun hangi bölgesinde yoğunlaştırılması gerektiği belirlenebilecektir.


  • Ergonomics Assessment and Redesign of Helicopter Transmission Assembly Fixture Using Digital Human Models

    by Ömer Koç, Neslihan Top, Yrd. Doç Dr. Cengiz Eldem, Harun Gökçe, İsmail Şahi̇n

    Digital Human Modeling (DHM) is an integral part of computerized engineering studies. In this study, an assembly fixture has been designed that will be used in the assembly of the helicopter transmission and it has been analyzed for compliance of ergonomic conditions using DHM technique. Rapid Upper Limb Assessment (RULA) and Biomechanical Motion Analyses (BMA) were used in the analyses. The ergonomic competence of the human was analyzed empirically for two different assembly conditions. The assembly fixture redesigned has significant ergonomic advantages over the conventional ones. According to the analyses was provided that 79.6 % advantage in compression loading and 94.3 % advantage in moment loading, which occurs on the L4-L5 lumbar vertebra discs. As a result, it was revealed that the ergonomic assembly fixture designed for workers to work in a more comfortable and safe manner was suitable for its purpose.


  • Open Access

    LAPTOP STAND DESIGN: DESIGNS FOR TRADITIONAL AND NEW MANUFACTURING METHODS AND COMPARISON

    by Cemile Şanlier, Hüseyin Rıza Börklü, Cengiz Eldem

    Geleneksel talaşlı imalat yöntemleri ham veya yarı mamul parça üzerinden malzeme eksiltme esasına dayanır. Normalde operatör sevk ve idaresi altında çalışan bu tür tezgâhlar zamanla yarı otomatik veya tam otomatik (bilgisayar kontrollü) bir karakter kazanmışlardır. CNC şeklinde de anılan bu teknolojide, genel imalat tezgah yapıları veya çalışma sistemleri korunurken, insanın sevk ve idare etme işlemlerinin yerini bilgisayar ve yazılımlar almıştır. Son zamanlarda tamamen farklı çalışma prensiplerine dayanan ve ‘Eklemeli İmalat (Eİ)’ diye adlandırılan yeni bir teknoloji geliştirilmiştir. Burada, önceki malzeme eksiltme tersine, ince tabakalar şeklinde malzeme ekleme ile parçalar yapılmaktadır. Tam otomatik bir yöntem olan Eİ, zaman alıcı ve pahalı bir yöntem olmakla birlikte daha karmaşık ve imali zor parçalar inşa edilebilmektedir. Ayrıca bu yeni imalat yöntemleri ile birlikte tasarım ve CAD’da devrim niteliğinde bazı yaklaşımlar da doğmuştur. Bunlardan Topoloji optimizasyonu ve Üretken tasarım (generative design) ön plana çıkan yaklaşımlardır. Topoloji optimizasyonu parça üzerinde belirtilen alan ve sınırlayıcılara göre minimum malzeme ile en uygun yapıyı oluşturan tasarım yaklaşımıdır. Üretken tasarım ise sadece tasarımda olması istenen kritik bölgeleri belirleyerek yapay zeka ile birçok tasarım varyantı oluşturur ve sunar. Bu yeni yaklaşımların hem üstün hem de zayıf tarafları vardır. Bu araştırmada evlerde sık kullanılan yeni bir dizüstü bilgisayar sehpasının geleneksel yöntemle ve Eİ ile üretimi için tasarımlar yapılmıştır. Eİ için yapılan tasarımlarda, topoloji optimizasyonu ve üretken tasarım yaklaşımı kullanılmıştır. Elde edilen bu üç farklı tasarım, malzeme kullanımı, ağırlık, üretim maliyeti gibi bazı parametrelere göre karşılaştırılmıştır. Sonuç olarak, eklemeli imalat ile kullanılacak olan üretken tasarımın belirlenen parametreler açısından daha iyi sonuçlar verdiği görülmüştür.


  • Open Access

    Bir Döküm Atölyesindeki Çalışma Duruşlarının Dijital İnsan Modelleme Tabanlı REBA Yöntemi ile Ergonomik Analizi

    by Fulya Erdemi̇r, Cengiz Eldem

    Üretim miktarı ve üretim kalitesi çalışanların performans düzeyleri ile doğrudan ilişkilidir. Uygun olmayan çalışma ortamları ve çalışma duruşları çalışan performansında dikkate değer miktarda düşüşlere sebep olmaktadır. Bununla birlikte uygun olmayan çalışma duruşları beraberlerinde kas ve iskelet sistemi rahatsızlıklarını getirmektedir. Ergonomi bilimi oluşan bu etkilerin risklerini çeşitli yöntemlerle değerlendirmekte ve çözümler sunmaktadır. Bu çalışma kapsamında CATIA V5 yazılımda bulunan Dijital İnsan Modelleme (DİM) simülasyonu kullanılarak bir döküm fabrikasındaki pota hazırlama sürecinin duruş ve pozisyon analizi gerçekleştirilmiştir. Elde edilen duruş ve pozisyonların açı değerleri kullanılarak Hızlı Tüm Vücut Değerlendirme (REBA) metoduyla oluşabilecek kas ve iskelet sistemi rahatsızlıkları riski değerlendirilmiştir. Sonuçta gerekli iyileştirmeler yapılarak çözüm önerileri sunulmuştur.