Shuyan Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shuyan Xu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Haoran Zhang
College of Home and Art Design, Northeast Forestry University, Harbin, People’s Republic of China
3 shared publications- Luo Wenjing
College of Home and Art Design Northeast Forestry University Harbin China
2 shared publications Enlai Tan
College of Home and Art Design, Northeast Forestry University Harbin Heilongjiang People's Republic of China
1 shared publicationJiaCheng Hu
College of Home and Art Design, Northeast Forestry University Harbin Heilongjiang People's Republic of China
1 shared publicationMingyu Ma
College of Home and Art Design, Northeast Forestry University, Harbin, Heilongjiang 150040, PR China
1 shared publicationShaokuan Hu
1 shared publication
Latest Publications
- Open Access
- 19 May 2026
- Published by Elsevier in SSRN Electronic Journal
FDM 3D printing properties of silanized ammonium polyphosphate/chitosan and nitrogen-doped TiO₂ complex-modified PLA and dual synergistic performance of flame-retardant-visible photocatalytic degradation of formaldehyde
Polylactic acid (PLA) is limited by poor flame retardancy. In this work, ammonium polyphosphate/chitosan (APP/CS) was synergistically modified by silane coupling agent KH-550. PLA-based synergistic flame-retardant composites (FP-X) were fabricated via blending with tributyl citrate (TBC), nitrogen-doped titanium dioxide (N-TiO₂), silanized APP (KH-APP), and silanized chitosan CS KH-CS). The modification improves the dispersion and interfacial compatibility of P-N fillers in the PLA matrix and constructs a P-N-Ti synergistic flame-retardant system. Flame-retardant tests show that the composite exhibits a high LOI of 29% and a UL-94 V-0 rating, with THR and pHRR reduced by 31.2% and 28.4%, respectively. The smoke release is suppressed, and the char yield is enhanced. Furthermore, the composites display excellent visible-light photodegradation of formaldehyde under the synergistic effect of N-TiO₂. This study achieves dual functions of flame retardancy and formaldehyde photodegradation, providing a novel strategy for eco-friendly multifunctional PLA composites with promising applications in 3D printing.
- 19 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessFDM 3D printing properties of silanized ammonium polyphosphate/chitosan and nitrogen-doped TiO₂ complex-modified PLA and dual synergistic performance of flame-retardant-visible photocatalytic degradation of formaldehyde
Polylactic acid (PLA) is limited by poor flame retardancy. In this work, ammonium polyphosphate/chitosan (APP/CS) was synergistically modified by silane coupling agent KH-550. PLA-based synergistic flame-retardant composites (FP-X) were fabricated via blending with tributyl citrate (TBC), nitrogen-doped titanium dioxide (N-TiO₂), silanized APP (KH-APP), and silanized chitosan CS KH-CS). The modification improves the dispersion and interfacial compatibility of P-N fillers in the PLA matrix and constructs a P-N-Ti synergistic flame-retardant system. Flame-retardant tests show that the composite exhibits a high LOI of 29% and a UL-94 V-0 rating, with THR and pHRR reduced by 31.2% and 28.4%, respectively. The smoke release is suppressed, and the char yield is enhanced. Furthermore, the composites display excellent visible-light photodegradation of formaldehyde under the synergistic effect of N-TiO₂. This study achieves dual functions of flame retardancy and formaldehyde photodegradation, providing a novel strategy for eco-friendly multifunctional PLA composites with promising applications in 3D printing.
- 30 January 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (13)
A Novel 3 D ‐Interface Engineering of WF / TPU Flour Composites: Toward Sustainable and High‐Performance FDM 3D Printing Materials
Wood–plastic composites (WPC), as sustainable materials for additive manufacturing, show broad potential in fused deposition modeling (FDM) 3D printing because of their environmental friendliness and cost‐effectiveness. However, poor interfacial bonding between wood flour (WF) and thermoplastic polyurethane (TPU) severely limits printing quality and mechanical stability. To overcome this challenge, this work presents several interface engineering strategies by introducing modifiers such as polycarbodiimide (PCDI), silane coupling agent (KH550), maleic anhydride (MAH), sodium hydroxide (NaOH), and nano‐aluminum oxide (Al 2 O 3 ). These modifiers aim to improve the interfacial compatibility and overall performance of WF/TPU composites. Multiscale characterization techniques—including scanning electron microscopy (SEM), Fourier‐transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic rheological testing, and contact angle measurement—were employed to analyze the mechanisms and effects of modification. The results indicated that optimal mechanical properties were achieved at 10 wt% WF content, with significantly enhanced interfacial bonding and melt fluidity. Among all tested modifiers, PCDI and KH550 demonstrated the most pronounced improvement. This study provides a theoretical and practical pathway toward economical, eco‐friendly, and high‐performance WPC materials for 3D printing.
- 30 January 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (13)
A Novel 3 D ‐Interface Engineering of WF / TPU Flour Composites: Toward Sustainable and High‐Performance FDM 3D Printing Materials
Wood–plastic composites (WPC), as sustainable materials for additive manufacturing, show broad potential in fused deposition modeling (FDM) 3D printing because of their environmental friendliness and cost‐effectiveness. However, poor interfacial bonding between wood flour (WF) and thermoplastic polyurethane (TPU) severely limits printing quality and mechanical stability. To overcome this challenge, this work presents several interface engineering strategies by introducing modifiers such as polycarbodiimide (PCDI), silane coupling agent (KH550), maleic anhydride (MAH), sodium hydroxide (NaOH), and nano‐aluminum oxide (Al 2 O 3 ). These modifiers aim to improve the interfacial compatibility and overall performance of WF/TPU composites. Multiscale characterization techniques—including scanning electron microscopy (SEM), Fourier‐transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic rheological testing, and contact angle measurement—were employed to analyze the mechanisms and effects of modification. The results indicated that optimal mechanical properties were achieved at 10 wt% WF content, with significantly enhanced interfacial bonding and melt fluidity. Among all tested modifiers, PCDI and KH550 demonstrated the most pronounced improvement. This study provides a theoretical and practical pathway toward economical, eco‐friendly, and high‐performance WPC materials for 3D printing.
- 18 November 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (6)
Study of PLA / TPU /Sodium Lignosulfonate Composite for Eco‐Friendly 3D Printing of Wood‐Like Materials
Polylactic acid (PLA) is a popular biodegradable polymer but suffers from brittleness and limited aesthetic options. To address this, we developed eco‐friendly wood‐like composites via melt blending of PLA, thermoplastic polyurethane (TPU), and sodium lignosulfonate (LS). TPU served as a toughening agent, increasing the elongation at break by 112%, while LS provided a wood‐like color and improved interfacial adhesion. The structural, morphological, thermal, mechanical, and chromatic properties of the composites were systematically investigated. The optimized composite (with 2 wt% LS) exhibited a minimal color difference (Δ E = 5.72) compared to poplar wood, good thermal stability, and enabled high‐fidelity 3D printing of wood‐grain textures with over 92% reproduction accuracy. This work presents a sustainable and versatile material for personalized and eco‐friendly 3D printing applications.
- 18 November 2025
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (6)
Study of PLA / TPU /Sodium Lignosulfonate Composite for Eco‐Friendly 3D Printing of Wood‐Like Materials
Polylactic acid (PLA) is a popular biodegradable polymer but suffers from brittleness and limited aesthetic options. To address this, we developed eco‐friendly wood‐like composites via melt blending of PLA, thermoplastic polyurethane (TPU), and sodium lignosulfonate (LS). TPU served as a toughening agent, increasing the elongation at break by 112%, while LS provided a wood‐like color and improved interfacial adhesion. The structural, morphological, thermal, mechanical, and chromatic properties of the composites were systematically investigated. The optimized composite (with 2 wt% LS) exhibited a minimal color difference (Δ E = 5.72) compared to poplar wood, good thermal stability, and enabled high‐fidelity 3D printing of wood‐grain textures with over 92% reproduction accuracy. This work presents a sustainable and versatile material for personalized and eco‐friendly 3D printing applications.
- 26 June 2025
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 39 (19) , 2921-2936
Enhanced performance of water-based wood coatings using KH-550-modified nano-silica: a sustainable approach for multifunctional surface protection
- 26 June 2025
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- Vol. 39 (19) , 2921-2936
Enhanced performance of water-based wood coatings using KH-550-modified nano-silica: a sustainable approach for multifunctional surface protection
- 12 March 2025
- Published by Elsevier in Current Applied Physics
- Vol. 73, 136-144
Synthesis and characterization of PVA/KC/NaYF4:Eu3+ composite fluorescent films
- 12 March 2025
- Published by Elsevier in Current Applied Physics
- Vol. 73, 136-144
Synthesis and characterization of PVA/KC/NaYF4:Eu3+ composite fluorescent films
- Top Cited Papers
- 3 March 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 306 (Pt 3) , 141671
Preparation of DCNC chemically cross-linked CMC/PVA composite film for sustainable and strawberry preservation active packaging
- 3 March 2025
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 306 (Pt 3) , 141671
Top Cited PapersPreparation of DCNC chemically cross-linked CMC/PVA composite film for sustainable and strawberry preservation active packaging
- 30 December 2024
- Published by Wiley in Packaging Technology and Science
- Vol. 38 (4) , 293-308
A Chlorine Dioxide Sustained‐Release System Based on Cellulose Porous Microspheres: A Novel Approach for Grape Preservation
Porous microspheres were fabricated utilizing the sol–gel phase transfer method of microcrystalline cellulose, exhibiting a three‐dimensional porous structure with notable adsorption capabilities. Employing these cellulose microspheres as the carrier, sodium chlorite as the precursor and acid as the activator, the microspheres physically adsorbed sodium chlorate to a level of 20.029 mg/g. Subsequently, a chlorine dioxide (ClO2) sustained‐release system was prepared through a chemical reaction with the citrate‐adsorbed cellulose microspheres in a sealed environment, theoretically yielding a cumulative ClO2 release of 11.957 mg/g. The release profile of ClO2 was found to be significantly influenced by factors such as temperature, humidity, the type of acid activator and the content of the hygroscopic agent. Notably, the rate of ClO2 release from the wet cellulose microsphere sustained‐release system could be modulated by adjusting the temperature. By fitting the release data to an S‐curve, the underlying release pattern was elucidated. Mathematical modelling revealed that the operation of the sustained‐release system encompasses two distinct stages: the reaction stage and the diffusion release stage. Water serves as a prerequisite for initiating the reaction stage, leading to an induction period in the dried cellulose microsphere release system. During this induction period, water absorption triggers the chemical reactions, allowing for the adjustment of ClO2 release amount and duration through variation in the hygroscopic agent content. These findings demonstrate the adjustability of the ClO2 sustained‐release system, positioning it as a promising green bactericidal agent for use in the preservation packaging of fruits and vegetables. When applied to grape preservation, the effectiveness of the sustained‐release chlorine dioxide system was assessed by monitoring key indicators such as grape decay rate, firmness, soluble solids content and titratable acidity. The results confirmed that the ClO2 sustained‐release system demonstrated favourable preservative effects on grapes, effectively prolonging their storage duration to over 5 days without compromising grape quality or altering their natural flavour.
- 30 December 2024
- Published by Wiley in Packaging Technology and Science
- Vol. 38 (4) , 293-308
A Chlorine Dioxide Sustained‐Release System Based on Cellulose Porous Microspheres: A Novel Approach for Grape Preservation
Porous microspheres were fabricated utilizing the sol–gel phase transfer method of microcrystalline cellulose, exhibiting a three‐dimensional porous structure with notable adsorption capabilities. Employing these cellulose microspheres as the carrier, sodium chlorite as the precursor and acid as the activator, the microspheres physically adsorbed sodium chlorate to a level of 20.029 mg/g. Subsequently, a chlorine dioxide (ClO2) sustained‐release system was prepared through a chemical reaction with the citrate‐adsorbed cellulose microspheres in a sealed environment, theoretically yielding a cumulative ClO2 release of 11.957 mg/g. The release profile of ClO2 was found to be significantly influenced by factors such as temperature, humidity, the type of acid activator and the content of the hygroscopic agent. Notably, the rate of ClO2 release from the wet cellulose microsphere sustained‐release system could be modulated by adjusting the temperature. By fitting the release data to an S‐curve, the underlying release pattern was elucidated. Mathematical modelling revealed that the operation of the sustained‐release system encompasses two distinct stages: the reaction stage and the diffusion release stage. Water serves as a prerequisite for initiating the reaction stage, leading to an induction period in the dried cellulose microsphere release system. During this induction period, water absorption triggers the chemical reactions, allowing for the adjustment of ClO2 release amount and duration through variation in the hygroscopic agent content. These findings demonstrate the adjustability of the ClO2 sustained‐release system, positioning it as a promising green bactericidal agent for use in the preservation packaging of fruits and vegetables. When applied to grape preservation, the effectiveness of the sustained‐release chlorine dioxide system was assessed by monitoring key indicators such as grape decay rate, firmness, soluble solids content and titratable acidity. The results confirmed that the ClO2 sustained‐release system demonstrated favourable preservative effects on grapes, effectively prolonging their storage duration to over 5 days without compromising grape quality or altering their natural flavour.