Antonina Andreeva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Antonina Andreeva has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Bohdana Komarysta
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Ukraine
2 shared publications - Dmytro Sopov
Одеський державний аграрний університет
1 shared publication - Ganna Trokhymenko
Admiral Makarov National University of Shipbuilding
1 shared publication - Iryna Dzhygyrey
National Technical University of Ukraine, Department of Cybernetics of Chemical Technology Processes, Peremogy av. 37, 03056 Kyiv, Ukraine
1 shared publication - Iryna Meshcheriakova
Prydniprovska State Academy of Civil Engineering and Architecture, Ukraine
1 shared publication - Ivan Maidanskyi
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute", Ukraine
1 shared publication
Latest Publications
- Open Access
- 30 May 2026
- Published by Publishing House Helvetica (Publications) in Науковий Журнал Метінвест Політехніки. Серія: Технічні науки
- No. 7,p. 237-246
ГЕОМЕХАНІЧНИЙ АНАЛІЗ ВПЛИВУ ПІДЗЕМНОЇ ГАЗИФІКАЦІЇ ВУГІЛЛЯ НА ОСІДАННЯ ЗЕМНОЇ ПОВЕРХНІ І СТІЙКІСТЬ ПОКРИВНИХ ПОРІД ВУГЛЕПОРОДНОЇ ТОВЩІ
Підземна газифікація вугілля (ПГВ) – це чиста безлюдна технологія видобутку вугілля з великим потенціалом. До основних екологічних небезпек, які стримують широке застосування цієї технології, віднесено високий ризик осідання поверхні, затоплення та забруднення води через тріщинуватість та зміщення порід розкриву над порожнинами реактора. Утворення порожнин внаслідок газифікації спричиняє перерозподіл напружень у навколишніх породах, провокує ріст існуючих тріщин та утворення нових, що призводить до руйнування покрівлі реакторів, непружних деформацій порід покрівлі та притоків підземних вод до реакторів. Для подолання цих проблем важливим є забезпечення стійкості порід над порожнинами реакторів ПГВ. Роботу присвячено аналізу впливу підземної газифікації вугілля на розкривні породи та земну поверхню. Для моделювання поведінки порід під час газифікації тонкого вугільного пласта застосовувався паралелний метод КПТД та метод скінченних елементів у середовищі ANSYS, що дозволило визначити напружено-деформований стан та температурний розподіл у навколишніх породах. Результати показали, що при збереженні несучої здатності запобіжних ціликів осідання поверхні та переміщення порід залишаються в межах допустимих значень, забезпечуючи мінімальний ризик негативного впливу газифікації на поверхню. Для газифікації пласта товщиною 1,05 м на глибині 392–465 м вертикальні осідання поверхні не перевищували 46 мм при ширині цілика 3,75 м та 27 мм при ширині 15,0 м, а висота зони зміни напружень над порожниною не перевищувала 70 м. Руйнування ціликів між порожнинами вигазовування призводить до істотного збільшення осідань – у 11,7 та 19,9 рази відповідно, що ставить під загрозу суцільність водоносних горизонтів та наземну інфраструктуру
- 30 May 2026
- Published by Publishing House Helvetica (Publications) in Науковий Журнал Метінвест Політехніки. Серія: Технічні науки
- No. 7,p. 237-246
Open AccessГЕОМЕХАНІЧНИЙ АНАЛІЗ ВПЛИВУ ПІДЗЕМНОЇ ГАЗИФІКАЦІЇ ВУГІЛЛЯ НА ОСІДАННЯ ЗЕМНОЇ ПОВЕРХНІ І СТІЙКІСТЬ ПОКРИВНИХ ПОРІД ВУГЛЕПОРОДНОЇ ТОВЩІ
Підземна газифікація вугілля (ПГВ) – це чиста безлюдна технологія видобутку вугілля з великим потенціалом. До основних екологічних небезпек, які стримують широке застосування цієї технології, віднесено високий ризик осідання поверхні, затоплення та забруднення води через тріщинуватість та зміщення порід розкриву над порожнинами реактора. Утворення порожнин внаслідок газифікації спричиняє перерозподіл напружень у навколишніх породах, провокує ріст існуючих тріщин та утворення нових, що призводить до руйнування покрівлі реакторів, непружних деформацій порід покрівлі та притоків підземних вод до реакторів. Для подолання цих проблем важливим є забезпечення стійкості порід над порожнинами реакторів ПГВ. Роботу присвячено аналізу впливу підземної газифікації вугілля на розкривні породи та земну поверхню. Для моделювання поведінки порід під час газифікації тонкого вугільного пласта застосовувався паралелний метод КПТД та метод скінченних елементів у середовищі ANSYS, що дозволило визначити напружено-деформований стан та температурний розподіл у навколишніх породах. Результати показали, що при збереженні несучої здатності запобіжних ціликів осідання поверхні та переміщення порід залишаються в межах допустимих значень, забезпечуючи мінімальний ризик негативного впливу газифікації на поверхню. Для газифікації пласта товщиною 1,05 м на глибині 392–465 м вертикальні осідання поверхні не перевищували 46 мм при ширині цілика 3,75 м та 27 мм при ширині 15,0 м, а висота зони зміни напружень над порожниною не перевищувала 70 м. Руйнування ціликів між порожнинами вигазовування призводить до істотного збільшення осідань – у 11,7 та 19,9 рази відповідно, що ставить під загрозу суцільність водоносних горизонтів та наземну інфраструктуру
- Open Access
- 1 May 2025
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 26 (5) , 229-236
Substantiation of parameters of moisture retention in arable land using mining wastes
The article is devoted to the substantiation of the parameters of the method of accumulation and retention of rain and irrigation water in agricultural fields, reducing its losses due to evaporation and convective removal. To preserve water in arable land, it is proposed to arrange parallel rows...
- 1 May 2025
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 26 (5) , 229-236
Open AccessSubstantiation of parameters of moisture retention in arable land using mining wastes
The article is devoted to the substantiation of the parameters of the method of accumulation and retention of rain and irrigation water in agricultural fields, reducing its losses due to evaporation and convective removal. To preserve water in arable land, it is proposed to arrange parallel rows...
- Open Access
- 31 October 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (10 (125)) , 6-16
Assessment of iron and heavy metals accumulation in the soils of the combat zone
The object of the study is soils in areas with active military operations. The study is dedicated to assessing the environmental impact of military operations through forecasting. The paper highlights the impact of military conflict on the distribution of heavy metals in soils. An analysis of the distribution and interaction of heavy metals in soil is carried out, which helps to understand the dynamics of pollution in the context of military conflict, and allows to understand the complex processes of the impact of military operations on the environment and the state of soil resources. The complex interrelationships between military operations and environmental pollution are revealed, with an emphasis on the importance of studying the distribution and immobilization of iron and heavy metals in the current conditions of the risk of military operations. It is shown that the most rapidly distributed metals in the soil are: iron (Fe), zinc (Zn), cadmium (Cd), antimony (Sb); the slowest: arsenic (As), lead (Pb), copper (Cu), nickel (Ni), mercury (Hg), manganese (Mn), vanadium (V). It was found that loams and chernozems are more prone to the accumulation of heavy metals and iron than sandy soils. Compared to sandy soil, the rate of metal release in loam decreases from 16.7 % to 69.7 %. In comparison of chernozem to loam, the release rate slows down from 17.85 % to 32.08 %. It was found that the rate of spreading of barium, cobalt, arsenic, lead, mercury, manganese, strontium and titanium does not depend on the type and mechanical parameters of the soil. The practical use of the results will help to predict the mechanism of pollution spread and help to identify the highest risk areas. The results of the study indicate the need to develop scientifically sound strategies for environmental protection and promotion of sustainable development in the area affected by military events
- 31 October 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (10 (125)) , 6-16
Open AccessAssessment of iron and heavy metals accumulation in the soils of the combat zone
The object of the study is soils in areas with active military operations. The study is dedicated to assessing the environmental impact of military operations through forecasting. The paper highlights the impact of military conflict on the distribution of heavy metals in soils. An analysis of the distribution and interaction of heavy metals in soil is carried out, which helps to understand the dynamics of pollution in the context of military conflict, and allows to understand the complex processes of the impact of military operations on the environment and the state of soil resources. The complex interrelationships between military operations and environmental pollution are revealed, with an emphasis on the importance of studying the distribution and immobilization of iron and heavy metals in the current conditions of the risk of military operations. It is shown that the most rapidly distributed metals in the soil are: iron (Fe), zinc (Zn), cadmium (Cd), antimony (Sb); the slowest: arsenic (As), lead (Pb), copper (Cu), nickel (Ni), mercury (Hg), manganese (Mn), vanadium (V). It was found that loams and chernozems are more prone to the accumulation of heavy metals and iron than sandy soils. Compared to sandy soil, the rate of metal release in loam decreases from 16.7 % to 69.7 %. In comparison of chernozem to loam, the release rate slows down from 17.85 % to 32.08 %. It was found that the rate of spreading of barium, cobalt, arsenic, lead, mercury, manganese, strontium and titanium does not depend on the type and mechanical parameters of the soil. The practical use of the results will help to predict the mechanism of pollution spread and help to identify the highest risk areas. The results of the study indicate the need to develop scientifically sound strategies for environmental protection and promotion of sustainable development in the area affected by military events
- Open Access
- 29 April 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (8 (122)) , 53-64
Optimizing biogas production using artificial neural network
The object of this study is the operating parameters of the anaerobic digestion unit. The study aims to increase the potential of biogas production. The task to select the optimal parameters of the working process of anaerobic digestion has been solved. A model of cumulative biogas and methane output in the process of anaerobic waste digestion has been constructed, which is conceptualized using the method of artificial neural network. The model is built on the basis of 11 process-related variables, such as hydraulic retention time, pH, operating temperature, etc. The plant parameters, leading to the highest volume of biogas production, were selected. It was determined that the optimal amount of biogas can be brought to 90 %, which exceeds the maximum value obtained from factory records by 12.6 % to 700 m3/t. Working conditions that led to optimal methane production were defined as the temperature of 39 °C, the total solids of 4.5 %, the organic percentage of 97.8 %, and pH 8.0. It was found that biogas production is the highest at temperature within the thermophilic range while the local maximum is achieved in the mesophilic temperature range. The model built serves to determine the optimal operating parameters for maximum biogas production and could be used to optimize biogas production productivity using limited experimental data. The model also makes it possible to predict the performance of anaerobic digestion under untested conditions. It is possible to practically use the developed biogas production model when monitoring the operation of the anaerobic digestion unit, to increase the efficiency of the process, and when adjusting the working conditions of the methane tank
- 29 April 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (8 (122)) , 53-64
Open AccessOptimizing biogas production using artificial neural network
The object of this study is the operating parameters of the anaerobic digestion unit. The study aims to increase the potential of biogas production. The task to select the optimal parameters of the working process of anaerobic digestion has been solved. A model of cumulative biogas and methane output in the process of anaerobic waste digestion has been constructed, which is conceptualized using the method of artificial neural network. The model is built on the basis of 11 process-related variables, such as hydraulic retention time, pH, operating temperature, etc. The plant parameters, leading to the highest volume of biogas production, were selected. It was determined that the optimal amount of biogas can be brought to 90 %, which exceeds the maximum value obtained from factory records by 12.6 % to 700 m3/t. Working conditions that led to optimal methane production were defined as the temperature of 39 °C, the total solids of 4.5 %, the organic percentage of 97.8 %, and pH 8.0. It was found that biogas production is the highest at temperature within the thermophilic range while the local maximum is achieved in the mesophilic temperature range. The model built serves to determine the optimal operating parameters for maximum biogas production and could be used to optimize biogas production productivity using limited experimental data. The model also makes it possible to predict the performance of anaerobic digestion under untested conditions. It is possible to practically use the developed biogas production model when monitoring the operation of the anaerobic digestion unit, to increase the efficiency of the process, and when adjusting the working conditions of the methane tank