Kaiming Deng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kaiming Deng has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Erjun Kan
Nanjing University of Science and Technology
18 shared publications - Ruifeng Lu
Institute of Ultrafast Optical Physics, Department of Applied Physics & MIIT Key Laboratory of Semiconductor Microstructure and Quantum Sensing, Nanjing University of Science and Technology, Nanjing 210094, China
9 shared publications Chuanyun Xiao
Department of Applied Physics, Nanjing University of Science and Technology, Nanjing, China
7 shared publicationsHaiping Wu
Department of Applied Physics and Key Laboratory of Soft Chemistry and Functional Materials (Ministry of Education), Nanjing University of Science and Technology , Nanjing, Jiangsu 210094, P. R. China
7 shared publications- Dewei Rao
School of Materials Science and Engineering Jiangsu University Zhenjiang 212013 P. R. China
5 shared publications - Feng Li
Nanjing University of Posts and Telecommunications
5 shared publications
Latest Publications
- 25 July 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (8) , 085941
Hydrogen bonds determine the nonbonding adhesion at HMX-based PBX interface
Polymer bonded explosives (PBXs) are kind of composite materials consisting of multi-layers structures, where the interfacial interactions can significantly affect their structures, properties and performance. To investigate the determinant factors affecting the interfacial interactions, in this work, the adhesion works at different interfaces are studied by molecular dynamics simulations. A key observation is that the hydrogen bonds are found to be a decisive factor that directly affects the interfacial interactions. When the fluoropolymers change from F2321 to F2319, the adhesion works with the HMX and coupling agent layer present a monotonous decrease and increase, respectively, corresponding to the changes in the number of weak hydrogen bonds. Thus the hydrogen bonds can be utilized to benchmark the nonvalent interfacial interactions. Moreover, the coupling agent layer as an intermediary enhances the adsorption between the explosive crystal and the binder, whose thickness significantly impacts the interfacial interactions. Its interactions with the HMX and fluoropolymers both show a similar increase with respect to its thickness and then stabilize at the thickness above 2.5 nm, corresponding to a surface density of six KH550 chains per nm2. This study provides a basic understanding of the nonbonding adhesion mechanisms in the PBXs and is helpful for the material selection and structure design.
- 25 July 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (8) , 085941
Hydrogen bonds determine the nonbonding adhesion at HMX-based PBX interface
Polymer bonded explosives (PBXs) are kind of composite materials consisting of multi-layers structures, where the interfacial interactions can significantly affect their structures, properties and performance. To investigate the determinant factors affecting the interfacial interactions, in this work, the adhesion works at different interfaces are studied by molecular dynamics simulations. A key observation is that the hydrogen bonds are found to be a decisive factor that directly affects the interfacial interactions. When the fluoropolymers change from F2321 to F2319, the adhesion works with the HMX and coupling agent layer present a monotonous decrease and increase, respectively, corresponding to the changes in the number of weak hydrogen bonds. Thus the hydrogen bonds can be utilized to benchmark the nonvalent interfacial interactions. Moreover, the coupling agent layer as an intermediary enhances the adsorption between the explosive crystal and the binder, whose thickness significantly impacts the interfacial interactions. Its interactions with the HMX and fluoropolymers both show a similar increase with respect to its thickness and then stabilize at the thickness above 2.5 nm, corresponding to a surface density of six KH550 chains per nm2. This study provides a basic understanding of the nonbonding adhesion mechanisms in the PBXs and is helpful for the material selection and structure design.
- Open Access
Tailoring the Microstructure of Porous Carbon Spheres as High Rate Performance Anodes for Lithium-Ion Batteries
Benefiting from their high surface areas, excellent conductivity, and environmental-friendliness, porous carbon nanospheres (PCSs) are of particular attraction for the anodes of lithium-ion batteries (LIBs). However, the regulation of carbon nanospheres with controlled pore distribution and graphitization for delivering high Li+ storage behavior is still under investigation. Here, we provide a facile approach to obtain PCSs with different microstructures via modulating the carbonization temperatures. With the processing temperature of 850 °C, the optimized PCSs exhibit an increased surface area, electrical conductivity, and enhanced specific capacity (202 mA h g−1 at 2 A g−1) compared to the PCSs carbonized at lower temperatures. Additionally, PCSs 850 provide excellent cyclability with a capacity retention of 83% for 500 cycles. Such work can pave a new pathway to achieve carbon nanospheres with excellent performances in LIBs.
Open AccessTailoring the Microstructure of Porous Carbon Spheres as High Rate Performance Anodes for Lithium-Ion Batteries
Benefiting from their high surface areas, excellent conductivity, and environmental-friendliness, porous carbon nanospheres (PCSs) are of particular attraction for the anodes of lithium-ion batteries (LIBs). However, the regulation of carbon nanospheres with controlled pore distribution and graphitization for delivering high Li+ storage behavior is still under investigation. Here, we provide a facile approach to obtain PCSs with different microstructures via modulating the carbonization temperatures. With the processing temperature of 850 °C, the optimized PCSs exhibit an increased surface area, electrical conductivity, and enhanced specific capacity (202 mA h g−1 at 2 A g−1) compared to the PCSs carbonized at lower temperatures. Additionally, PCSs 850 provide excellent cyclability with a capacity retention of 83% for 500 cycles. Such work can pave a new pathway to achieve carbon nanospheres with excellent performances in LIBs.
- Open Access
Optimized Pinecone-Squama-Structure MoS2-Coated CNT and Graphene Framework as Binder-Free Anode for Li-Ion Battery with High Capacity and Cycling Stability
Extensive research has been conducted on the development of high-rate and cyclic stability anodes for lithium batteries (LIBs) due to their high energy density. Molybdenum disulfide (MoS2) with layered structure has garnered significant interest due to its exceptional theoretic Li+ storage behavior as anodes (670 mA h g−1). However, achieving a high rate and long cyclic life of anode materials remains a challenge. Herein, we designed and synthesized a free-standing carbon nanotubes-graphene (CGF) foam, then presented a facile strategy to fabricate the MoS2-coated CGF self-assembly anodes with different MoS2 distributions. Such binder-free electrode possesses the advantages of both MoS2 and graphene-based materials. Through rational regulation of the ratio of MoS2, the MoS2-coated CGF with uniformly distributed MoS2 exhibits a nano pinecone-squama-like structure that can accommodate the large volume change during the cycle process, thereby significantly enhancing the cycling stability (417 mA h g−1 after 1000 cycles), ideal rate performance, and high pseudocapacitive behavior (with a 76.6% contribution at 1 mV s−1). Such a neat nano-pinecone structure can effectively coordinate MoS2 and carbon framework, providing valuable insights for the construction of advanced anode materials.
Open AccessOptimized Pinecone-Squama-Structure MoS2-Coated CNT and Graphene Framework as Binder-Free Anode for Li-Ion Battery with High Capacity and Cycling Stability
Extensive research has been conducted on the development of high-rate and cyclic stability anodes for lithium batteries (LIBs) due to their high energy density. Molybdenum disulfide (MoS2) with layered structure has garnered significant interest due to its exceptional theoretic Li+ storage behavior as anodes (670 mA h g−1). However, achieving a high rate and long cyclic life of anode materials remains a challenge. Herein, we designed and synthesized a free-standing carbon nanotubes-graphene (CGF) foam, then presented a facile strategy to fabricate the MoS2-coated CGF self-assembly anodes with different MoS2 distributions. Such binder-free electrode possesses the advantages of both MoS2 and graphene-based materials. Through rational regulation of the ratio of MoS2, the MoS2-coated CGF with uniformly distributed MoS2 exhibits a nano pinecone-squama-like structure that can accommodate the large volume change during the cycle process, thereby significantly enhancing the cycling stability (417 mA h g−1 after 1000 cycles), ideal rate performance, and high pseudocapacitive behavior (with a 76.6% contribution at 1 mV s−1). Such a neat nano-pinecone structure can effectively coordinate MoS2 and carbon framework, providing valuable insights for the construction of advanced anode materials.
- 1 April 2019
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 108, 44-52
Band structure tuning and charge separation of MNX monolayers and MNX/GaS van der Waals heterostructures
- 1 April 2019
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 108, 44-52
Band structure tuning and charge separation of MNX monolayers and MNX/GaS van der Waals heterostructures
- 3 July 2018
- Published by Wiley in Advanced Theory and Simulations
- Vol. 1 (9)
Hexagonal Boron Nitride–Metal Junction: Removing the Schottky Barriers by Grain Boundary
Atomically thin hexagonal boron nitride (h‐BN) layers have been used as an ultra‐thin spacer layer for metal–insulator–metal (MIM) structures, which enables a wide range of applications such as nanocapacitors and field‐effect tunneling transistors. Although pristine h‐BN layers, produced by chemical vapor deposition (CVD) methods, are always with ubiquitous grain boundaries (GBs), the contact of such layers with transition metal (TM) has not been explored. Here, we studied h‐BN monolayer with GBs on Ni(111) and Cu(111) surfaces through a comprehensively first‐principles calculation. Our results show that for the free‐standing h‐BN monolayer with GBs, it presents a moiré pattern characteristic and its energy gap is narrowed by about 38%. When h‐BN with GBs is deposited on Ni(111) and Cu(111) surfaces, the GBs containing B‐B pairs are attracted to the TM surface while the GBs with N‐N pairs(GBs‐N) parts are repelled from the surfaces. Interestingly, the calculated Schottky barriers (SBs) for electrons between the h‐BN layer and the TM surfaces almost disappear due to the existence of GB structures. Thus, our results predicted that h‐BN with GBs may form ohmic contact with TM surfaces, which can be used in real electric devices.
- 3 July 2018
- Published by Wiley in Advanced Theory and Simulations
- Vol. 1 (9)
Hexagonal Boron Nitride–Metal Junction: Removing the Schottky Barriers by Grain Boundary
Atomically thin hexagonal boron nitride (h‐BN) layers have been used as an ultra‐thin spacer layer for metal–insulator–metal (MIM) structures, which enables a wide range of applications such as nanocapacitors and field‐effect tunneling transistors. Although pristine h‐BN layers, produced by chemical vapor deposition (CVD) methods, are always with ubiquitous grain boundaries (GBs), the contact of such layers with transition metal (TM) has not been explored. Here, we studied h‐BN monolayer with GBs on Ni(111) and Cu(111) surfaces through a comprehensively first‐principles calculation. Our results show that for the free‐standing h‐BN monolayer with GBs, it presents a moiré pattern characteristic and its energy gap is narrowed by about 38%. When h‐BN with GBs is deposited on Ni(111) and Cu(111) surfaces, the GBs containing B‐B pairs are attracted to the TM surface while the GBs with N‐N pairs(GBs‐N) parts are repelled from the surfaces. Interestingly, the calculated Schottky barriers (SBs) for electrons between the h‐BN layer and the TM surfaces almost disappear due to the existence of GB structures. Thus, our results predicted that h‐BN with GBs may form ohmic contact with TM surfaces, which can be used in real electric devices.
- 12 January 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (7) , 1709-1714
Designing half-metallic ferromagnetism by a new strategy: an example of superhalogen modified graphitic C3N4
Designing half-metallic ferromagnetism at atomic scale is always one of the hottest topics for the scientific community due to its potential in spintronics applications. Although the band alignment strategy is broadly adopted in semiconductor-based research, it has not touched the field of low-dimensional spintronics. Here, taking graphitic C3N4 (g-C3N4) as an example, we show that perfect half-metallic ferromagnetism can be realized through a band alignment strategy. According to the alignment of the valence band maximum (VBM) and the conduction band minimum (CBM) of g-C3N4, and the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of superhalogens, BF4 is predicted to be a promising building unit which induces half-metallic ferromagnetism in the g-C3N4 sheet by forming hybrid structures. Verified by density functional simulations, we found that a net magnetic moment of 1 μB per BF4 is induced in the g-C3N4 sheet. The magnetic moment distributes evenly on the double-coordinated nitrogen atoms with ferromagnetic coupling, and dynamics simulations confirmed that the structure of g-C3N4 is well protected. Thus, our study proposes a promising way to design half-metallic ferromagnetism at atomic scale, which will evoke further experimental interest.
- 12 January 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (7) , 1709-1714
Designing half-metallic ferromagnetism by a new strategy: an example of superhalogen modified graphitic C3N4
Designing half-metallic ferromagnetism at atomic scale is always one of the hottest topics for the scientific community due to its potential in spintronics applications. Although the band alignment strategy is broadly adopted in semiconductor-based research, it has not touched the field of low-dimensional spintronics. Here, taking graphitic C3N4 (g-C3N4) as an example, we show that perfect half-metallic ferromagnetism can be realized through a band alignment strategy. According to the alignment of the valence band maximum (VBM) and the conduction band minimum (CBM) of g-C3N4, and the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) of superhalogens, BF4 is predicted to be a promising building unit which induces half-metallic ferromagnetism in the g-C3N4 sheet by forming hybrid structures. Verified by density functional simulations, we found that a net magnetic moment of 1 μB per BF4 is induced in the g-C3N4 sheet. The magnetic moment distributes evenly on the double-coordinated nitrogen atoms with ferromagnetic coupling, and dynamics simulations confirmed that the structure of g-C3N4 is well protected. Thus, our study proposes a promising way to design half-metallic ferromagnetism at atomic scale, which will evoke further experimental interest.
- 9 January 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (2) , 1371-1376
Edge-Modified Graphene Nanoribbons: Appearance of Robust Spiral Magnetism
- 9 January 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (2) , 1371-1376
Edge-Modified Graphene Nanoribbons: Appearance of Robust Spiral Magnetism
- 16 May 2016
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 18 (23) , 15765-15773
Realizing half-metallicity in K2CoF4 exfoliated nanosheets via defect engineering
Two-dimensional (2D) materials with intriguing electronic characteristics open up tremendous opportunities for application in future nanoelectronic devices, and have become one of the hot subjects of today's research. Here, we firstly predict the possibility of realizing a 2D exfoliated ionic bonding nanosheet, namely the K2CoF4 nanosheet, based on first-principles calculations. Through analysis of the cleavage energy, in-plane stiffness and stability, the free-standing K2CoF4 nanosheet can be exfoliated in experiments. It is shown that the K2CoF4 nanosheet with K vacancy can transform into a ferromagnetic half-metal under moderate tensile strain, whereas the pristine K2CoF4 nanosheet is an antiferromagnetic semiconductor. Monte Carlo simulations based on the Heisenberg model predict that the Curie temperature for the K vacancy K2CoF4 nanosheet under 2% tensile strain is higher than room temperature. Therefore, our results suggest that the K2CoF4 nanosheet may be a promising material for spintronic and nanoelectronic applications.
- 16 May 2016
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 18 (23) , 15765-15773
Realizing half-metallicity in K2CoF4 exfoliated nanosheets via defect engineering
Two-dimensional (2D) materials with intriguing electronic characteristics open up tremendous opportunities for application in future nanoelectronic devices, and have become one of the hot subjects of today's research. Here, we firstly predict the possibility of realizing a 2D exfoliated ionic bonding nanosheet, namely the K2CoF4 nanosheet, based on first-principles calculations. Through analysis of the cleavage energy, in-plane stiffness and stability, the free-standing K2CoF4 nanosheet can be exfoliated in experiments. It is shown that the K2CoF4 nanosheet with K vacancy can transform into a ferromagnetic half-metal under moderate tensile strain, whereas the pristine K2CoF4 nanosheet is an antiferromagnetic semiconductor. Monte Carlo simulations based on the Heisenberg model predict that the Curie temperature for the K vacancy K2CoF4 nanosheet under 2% tensile strain is higher than room temperature. Therefore, our results suggest that the K2CoF4 nanosheet may be a promising material for spintronic and nanoelectronic applications.
- 10 May 2016
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 7 (10) , 1919-1924
Quantum Phase Transition in Germanene and Stanene Bilayer: From Normal Metal to Topological Insulator
Two-dimensional (2D) topological insulators (TIs) that exhibit quantum spin Hall effects are a new class of materials with conducting edge and insulating bulk. The conducting edge bands are spin-polarized, free of back scattering, and protected by time-reversal symmetry with potential for high-efficiency applications in spintronics. On the basis of first-principles calculations, we show that under external pressure recently synthesized stanene and germanene buckled bilayers can automatically convert into a new dynamically stable phase with flat honeycomb meshes. In contrast with the active surfaces of buckled bilayer of stanene or germanene, the above new phase is chemically inert. Furthermore, we demonstrate that these flat bilayers are 2D TIs with sizable topologically nontrivial band gaps of ∼0.1 eV, which makes them viable for room-temperature applications. Our results suggest some new design principles for searching stable large-gap 2D TIs.
- 10 May 2016
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 7 (10) , 1919-1924
Quantum Phase Transition in Germanene and Stanene Bilayer: From Normal Metal to Topological Insulator
Two-dimensional (2D) topological insulators (TIs) that exhibit quantum spin Hall effects are a new class of materials with conducting edge and insulating bulk. The conducting edge bands are spin-polarized, free of back scattering, and protected by time-reversal symmetry with potential for high-efficiency applications in spintronics. On the basis of first-principles calculations, we show that under external pressure recently synthesized stanene and germanene buckled bilayers can automatically convert into a new dynamically stable phase with flat honeycomb meshes. In contrast with the active surfaces of buckled bilayer of stanene or germanene, the above new phase is chemically inert. Furthermore, we demonstrate that these flat bilayers are 2D TIs with sizable topologically nontrivial band gaps of ∼0.1 eV, which makes them viable for room-temperature applications. Our results suggest some new design principles for searching stable large-gap 2D TIs.
- 3 December 2015
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 9 (3) , 841-849
Efficient band structure tuning, charge separation, and visible-light response in ZrS 2 -based van der Waals heterostructures
Bilayer ZrS 2 -based vdW heterostructures are proposed as efficient photocatalysts for water splitting under visible light.
- 3 December 2015
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 9 (3) , 841-849
Efficient band structure tuning, charge separation, and visible-light response in ZrS 2 -based van der Waals heterostructures
Bilayer ZrS 2 -based vdW heterostructures are proposed as efficient photocatalysts for water splitting under visible light.