Bahri Eren Uzuner
Bahri Eren Uzuner has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Amir Zarean Afshord
ODTU‐GUNAM Middle East Technical University Ankara 06800 Turkey
3 shared publications - Gorkem Gunbas
Department of Chemistry University of California Davis Davis California USA
3 shared publications - Selcuk Yerci
Middle East Technical University
3 shared publications - Aranzazu Aguirre
Hasselt University Martelarenlaan 42
1 shared publication - Konstantin Tsoi
ODTU‐GUNAM Middle East Technical University Ankara 06800 Turkey
1 shared publication - Salar H. Sedani
Fraunhofer Institute for Solar Energy Systems Freiburg im Breisgau Germany
1 shared publication
Latest Publications
- Open Access
- 13 November 2026
- Published by Wiley in Advanced Materials Technologies
- p. e71462
Eliminating P2 Scribes: A Unique Interconnection Design for Efficient Perovskite Solar Modules Under Indoor Lighting
In the pursuit of highly efficient and cost‐effective thin‐film photovoltaic technologies, perovskite solar cells (PSCs) have emerged as a promising frontier with their remarkable light‐absorbing properties, particularly in the visible region. This ability not only holds great promise for sunlight harvesting but also puts PSCs as a leading candidate for indoor photovoltaics. In this study, we introduce a novel perovskite solar module (PSM) design that completely eliminates the P2 laser scribing step. The P2‐free region between the P1 and P3 scribes can undergo reverse breakdown and act as linear resistors with a contact resistivity (ρ c ) of ∼1.25 Ω.cm 2 , which is sufficiently low to achieve high‐efficiency PSMs under indoor light illumination. The champion 4 cm 2 ‐PSM with no P2 scribe demonstrated 32.80% power conversion efficiency (PCE) with a remarkable 82.7% fill factor (FF) as compared to an efficiency of 30.05% and FF of 80.8% for the standard PSM. Hence, the proposed first‐of‐its‐kind approach paves the way for the realization of cost‐effective, high geometrical fill factor (GFF) indoor solar modules with reduced Pb exposure risk during fabrication, thus offering a sustainable power solution for a wide range of Internet‐of‐Things (IoT) devices currently reliant on conventional batteries.
- 13 November 2026
- Published by Wiley in Advanced Materials Technologies
- p. e71462
Open AccessEliminating P2 Scribes: A Unique Interconnection Design for Efficient Perovskite Solar Modules Under Indoor Lighting
In the pursuit of highly efficient and cost‐effective thin‐film photovoltaic technologies, perovskite solar cells (PSCs) have emerged as a promising frontier with their remarkable light‐absorbing properties, particularly in the visible region. This ability not only holds great promise for sunlight harvesting but also puts PSCs as a leading candidate for indoor photovoltaics. In this study, we introduce a novel perovskite solar module (PSM) design that completely eliminates the P2 laser scribing step. The P2‐free region between the P1 and P3 scribes can undergo reverse breakdown and act as linear resistors with a contact resistivity (ρ c ) of ∼1.25 Ω.cm 2 , which is sufficiently low to achieve high‐efficiency PSMs under indoor light illumination. The champion 4 cm 2 ‐PSM with no P2 scribe demonstrated 32.80% power conversion efficiency (PCE) with a remarkable 82.7% fill factor (FF) as compared to an efficiency of 30.05% and FF of 80.8% for the standard PSM. Hence, the proposed first‐of‐its‐kind approach paves the way for the realization of cost‐effective, high geometrical fill factor (GFF) indoor solar modules with reduced Pb exposure risk during fabrication, thus offering a sustainable power solution for a wide range of Internet‐of‐Things (IoT) devices currently reliant on conventional batteries.
- Open Access
- 4 May 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (31)
Efficient and Stable Inverted Wide‐Bandgap Perovskite Solar Cells and Modules Enabled by Hybrid Evaporation‐Solution Method
Wide‐bandgap perovskite solar cells (WBG‐PSCs), when partnered with Si bottom cells in tandem configuration, can provide efficiencies up to 44%; yet, the development of stable, efficient, and scalable WBG‐PSCs is required. Here, the utility of the hybrid evaporation‐solution method (HESM) is investigated to meet these demanding requirements via its unique advantages including ease of control and reproducibility. A PbI2/CsBr layer is co‐evaporated followed by coating of organic‐halide solutions in a green solvent. Bandgaps between 1.55–1.67 eV are systematically screened by varying CsBr and MABr content. Champion efficiencies of 21.06% and 20.35% in cells and 19.83% and 18.73% in mini‐modules (16 cm2) for perovskites with 1.64 and 1.67 eV bandgaps are achieved, respectively. Additionally, 18.51%‐efficient semi‐transparent WBG‐PSCs are implemented in 4T perovskite/bifacial silicon configuration, reaching a projected power output of 30.61 mW cm−2 based on PD IEC TS 60904‐1‐2 (BiFi200) protocol. Despite similar bandgaps achieved by incorporating Br via MABr solution and/or CsBr evaporation, PSCs having a perovskite layer without MABr addition show significantly higher thermal and moisture stability. This study proves scalable, high‐performance, and stable WBG‐PSCs are enabled by HESM, hence their use in tandems and in emerging applications such as indoor photovoltaics are now within reach.
- 4 May 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (31)
Open AccessEfficient and Stable Inverted Wide‐Bandgap Perovskite Solar Cells and Modules Enabled by Hybrid Evaporation‐Solution Method
Wide‐bandgap perovskite solar cells (WBG‐PSCs), when partnered with Si bottom cells in tandem configuration, can provide efficiencies up to 44%; yet, the development of stable, efficient, and scalable WBG‐PSCs is required. Here, the utility of the hybrid evaporation‐solution method (HESM) is investigated to meet these demanding requirements via its unique advantages including ease of control and reproducibility. A PbI2/CsBr layer is co‐evaporated followed by coating of organic‐halide solutions in a green solvent. Bandgaps between 1.55–1.67 eV are systematically screened by varying CsBr and MABr content. Champion efficiencies of 21.06% and 20.35% in cells and 19.83% and 18.73% in mini‐modules (16 cm2) for perovskites with 1.64 and 1.67 eV bandgaps are achieved, respectively. Additionally, 18.51%‐efficient semi‐transparent WBG‐PSCs are implemented in 4T perovskite/bifacial silicon configuration, reaching a projected power output of 30.61 mW cm−2 based on PD IEC TS 60904‐1‐2 (BiFi200) protocol. Despite similar bandgaps achieved by incorporating Br via MABr solution and/or CsBr evaporation, PSCs having a perovskite layer without MABr addition show significantly higher thermal and moisture stability. This study proves scalable, high‐performance, and stable WBG‐PSCs are enabled by HESM, hence their use in tandems and in emerging applications such as indoor photovoltaics are now within reach.