Nirav Annavarapu
Nirav Annavarapu has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Iakov Goldberg
Imec Kapeldreef 75 Leuven 3001 Belgium
6 shared publications - Jan Genoe
IMEC, Leuven, Belgium
6 shared publications - Karim Elkhouly
IMEC Leuven Belgium
6 shared publications - Paul Heremans
KU Leuven
5 shared publications - Robert Gehlhaar
IMEC, Kapeldreef 75, Leuven 3001, Belgium
5 shared publications - Sarah Hamdad
Imec Kapeldreef 75 Leuven 3001 Belgium
3 shared publications
Latest Publications
- Open Access
- 23 August 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (40) , e2314193
Toward Thin‐Film Laser Diodes with Metal Halide Perovskites
Metal halide perovskite semiconductors hold a strong promise for enabling thin‐film laser diodes. Perovskites distinguish themselves from other non‐epitaxial media primarily through their ability to maintain performance at high current densities, which is a critical requirement for achieving injection lasing. Coming in a wide range of varieties, numerous perovskites delivered low‐threshold optical amplified spontaneous emission and optically pumped lasing when combined with a suitable optical cavity. A progression toward electrically pumped lasing requires the development of efficient light‐emitting structures with reduced optical losses and high radiative efficiency at lasing‐level current densities. This involves a set of important trade‐offs in terms of material choice, stack and waveguide design, as well as resonator integration. In this Perspective, the key milestones are highlighted that have been achieved in the study of passive optical waveguides and light‐emitting diodes, and these learnings are translated toward more complex laser diode architectures. Finally, a novel resonator integration route is proposed that is capable of relaxing optical and electrical design constraints.
- 23 August 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (40) , e2314193
Open AccessToward Thin‐Film Laser Diodes with Metal Halide Perovskites
Metal halide perovskite semiconductors hold a strong promise for enabling thin‐film laser diodes. Perovskites distinguish themselves from other non‐epitaxial media primarily through their ability to maintain performance at high current densities, which is a critical requirement for achieving injection lasing. Coming in a wide range of varieties, numerous perovskites delivered low‐threshold optical amplified spontaneous emission and optically pumped lasing when combined with a suitable optical cavity. A progression toward electrically pumped lasing requires the development of efficient light‐emitting structures with reduced optical losses and high radiative efficiency at lasing‐level current densities. This involves a set of important trade‐offs in terms of material choice, stack and waveguide design, as well as resonator integration. In this Perspective, the key milestones are highlighted that have been achieved in the study of passive optical waveguides and light‐emitting diodes, and these learnings are translated toward more complex laser diode architectures. Finally, a novel resonator integration route is proposed that is capable of relaxing optical and electrical design constraints.
- Open Access
- 4 August 2024
- Published by Wiley in Advanced Photonics Research
- Vol. 5 (12)
Estimating the Optically Pumped Threshold Fluence of Thin‐Film Gain Media Using Arbitrary Excitation Beams
Optically pumped threshold fluences are a widely reported metric to benchmark the performance of thin‐film gain media and lasers. Estimating the threshold fluence for nonhomogeneous beams, such as a circular Gaussian excitation, is not trivial since the average fluence depends on the estimated spot diameter. Using an exemplary lead halide perovskite film, the inversion volume at different pump energies is mapped. It is shown that the peak fluence of an arbitrary spatial beam profile is more relevant at the threshold, as it provides an upper bound to the threshold fluence. Also, simple conversion factors to estimate the peak fluence using Gaussian excitation beams are provided and the methodology to arbitrary profiles is extrapolated. Furthermore, it is advocated for using flat‐top or uniform stripe excitations to unambiguously extract the threshold fluence, since these excitations display minor discrepancies between the average and peak fluence, and keep the inversion volume relatively constant during the measurement.
- 4 August 2024
- Published by Wiley in Advanced Photonics Research
- Vol. 5 (12)
Open AccessEstimating the Optically Pumped Threshold Fluence of Thin‐Film Gain Media Using Arbitrary Excitation Beams
Optically pumped threshold fluences are a widely reported metric to benchmark the performance of thin‐film gain media and lasers. Estimating the threshold fluence for nonhomogeneous beams, such as a circular Gaussian excitation, is not trivial since the average fluence depends on the estimated spot diameter. Using an exemplary lead halide perovskite film, the inversion volume at different pump energies is mapped. It is shown that the peak fluence of an arbitrary spatial beam profile is more relevant at the threshold, as it provides an upper bound to the threshold fluence. Also, simple conversion factors to estimate the peak fluence using Gaussian excitation beams are provided and the methodology to arbitrary profiles is extrapolated. Furthermore, it is advocated for using flat‐top or uniform stripe excitations to unambiguously extract the threshold fluence, since these excitations display minor discrepancies between the average and peak fluence, and keep the inversion volume relatively constant during the measurement.
- 15 January 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (12)
Four‐Dimensional Design Space of High‐Q Second‐Order Distributed Feedback Perovskite Lasers
Second‐order distributed feedback (DFB) resonators are widely used for thin‐film lasers as they combine low lasing thresholds with ease of manufacturing. Here, the grating design parameters are varied to map the lasing characteristics of lead halide perovskite films deposited on a single substrate that contains hundreds of high‐quality silicon nitride surface gratings. The lowest lasing threshold (≈130 µJ cm−2) is identified through the aid of near‐field and far‐field imaging spectroscopy in a four‐dimensional design space composed of grating period, duty cycle, active layer thickness, and cavity length. Moreover, it is shown that antisymmetric modes support high‐quality lasing (Q up to ≈10800) in the second‐order DFBs. The multi‐dimensional experimental analysis is accompanied by a thorough theoretical study with a semi‐empirical model based on coupled wave equations, which is used to investigate the lasing characteristics beyond the manufacturing range. The results can be applied to a broad range of thin‐film DFB resonators, enabling the design of more complex laser stack configurations including light‐emitting devices for current‐injection lasing.
- 15 January 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (12)
Four‐Dimensional Design Space of High‐Q Second‐Order Distributed Feedback Perovskite Lasers
Second‐order distributed feedback (DFB) resonators are widely used for thin‐film lasers as they combine low lasing thresholds with ease of manufacturing. Here, the grating design parameters are varied to map the lasing characteristics of lead halide perovskite films deposited on a single substrate that contains hundreds of high‐quality silicon nitride surface gratings. The lowest lasing threshold (≈130 µJ cm−2) is identified through the aid of near‐field and far‐field imaging spectroscopy in a four‐dimensional design space composed of grating period, duty cycle, active layer thickness, and cavity length. Moreover, it is shown that antisymmetric modes support high‐quality lasing (Q up to ≈10800) in the second‐order DFBs. The multi‐dimensional experimental analysis is accompanied by a thorough theoretical study with a semi‐empirical model based on coupled wave equations, which is used to investigate the lasing characteristics beyond the manufacturing range. The results can be applied to a broad range of thin‐film DFB resonators, enabling the design of more complex laser stack configurations including light‐emitting devices for current‐injection lasing.
- 3 January 2024
- Published by Springer Nature in Nature Photonics
- Vol. 18 (2) , 132-138
Electrically assisted amplified spontaneous emission in perovskite light-emitting diodes
- 3 January 2024
- Published by Springer Nature in Nature Photonics
- Vol. 18 (2) , 132-138
Electrically assisted amplified spontaneous emission in perovskite light-emitting diodes
- 5 May 2023
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 10 (5) , 1583-1590
Scattered Emission Profile Technique for Accurate and Fast Assessment of Optical Gain in Thin Film Lasing Materials
- 5 May 2023
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 10 (5) , 1583-1590
Scattered Emission Profile Technique for Accurate and Fast Assessment of Optical Gain in Thin Film Lasing Materials
- Open Access
- 4 May 2023
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 10 (5) , 1591-1600
Multimode Lasing in All-Solution-Processed UV-Nanoimprinted Distributed Feedback MAPbI3 Perovskite Waveguides
- 4 May 2023
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 10 (5) , 1591-1600
Open AccessMultimode Lasing in All-Solution-Processed UV-Nanoimprinted Distributed Feedback MAPbI3 Perovskite Waveguides