Erdal Çılğın
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Erdal Çılğın has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Halis Deviren
Dicle Universitesi
4 shared publications - Selman Aydın
Department of Mechanical and Metal Technology Vocational High School of Technical Sciences, Batman University Batman Turkey
1 shared publication
Latest Publications
- 26 August 2026
- Published by Taylor & Francis in Biofuels
- p. 1-36
Green-synthesized silver nanoparticles from endemic Allium tuncelianum and their effects on combustion and emission characteristics of cottonseed oil-derived B20 fuel in a diesel engine
Nanotechnology has emerged as a strategic research field across numerous scientific and engineering disciplines, particularly in energy, environmental, healthcare, and advanced materials technologi...
- 26 August 2026
- Published by Taylor & Francis in Biofuels
- p. 1-36
Green-synthesized silver nanoparticles from endemic Allium tuncelianum and their effects on combustion and emission characteristics of cottonseed oil-derived B20 fuel in a diesel engine
Nanotechnology has emerged as a strategic research field across numerous scientific and engineering disciplines, particularly in energy, environmental, healthcare, and advanced materials technologi...
- Open Access
- 28 July 2026
- Published by Springer Nature in Discover Vehicles
- Vol. 2 (1) , 28
Green-synthesized silver nanoparticle additives from Allium tuncelianum for diesel engine operation with a cottonseed biodiesel-diesel blend
- 28 July 2026
- Published by Springer Nature in Discover Vehicles
- Vol. 2 (1) , 28
Open AccessGreen-synthesized silver nanoparticle additives from Allium tuncelianum for diesel engine operation with a cottonseed biodiesel-diesel blend
- 17 February 2025
- Published by Taylor & Francis in Biofuels
- Vol. 16 (8) , 848-868
Synergistic effects of SWCNT and MgO nanoparticle additives on engine performance and emissions: a laboratory analysis approach
- 17 February 2025
- Published by Taylor & Francis in Biofuels
- Vol. 16 (8) , 848-868
Synergistic effects of SWCNT and MgO nanoparticle additives on engine performance and emissions: a laboratory analysis approach
- Open Access
- 28 March 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 57
Investigation of the effects of single and double-walled carbon nanotube utilization on diesel engine combustion, emissions, and performance
- 28 March 2024
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 57
Open AccessInvestigation of the effects of single and double-walled carbon nanotube utilization on diesel engine combustion, emissions, and performance
- 17 November 2023
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 46 (1) , 35-53
Spectroscopic verification of biodiesel synthesis from turpentine tree oil through two-step chemical reactions: investigation of the use of synthesized biodiesel and acetone as fuel additives in diesel engines
- 17 November 2023
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 46 (1) , 35-53
Spectroscopic verification of biodiesel synthesis from turpentine tree oil through two-step chemical reactions: investigation of the use of synthesized biodiesel and acetone as fuel additives in diesel engines
- 2 October 2023
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 45 (4) , 12181-12200
Study on using nano magnesium oxide (MNMgO) nanoparticles as fuel additives in terebinth oil biodiesel blends in a research diesel engine
- 2 October 2023
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 45 (4) , 12181-12200
Study on using nano magnesium oxide (MNMgO) nanoparticles as fuel additives in terebinth oil biodiesel blends in a research diesel engine
- 1 May 2022
- Published by International Journal of Automotive Engineering and Technologies in International Journal of Automotive Engineering and Technologies
- Vol. 11 (1) , 9-17
Experimental investigation of essential oils as fuel additives
Essential oils were investigated as fuel additives in this research. Origanum Acutidens is used to make essential oil. In the oil recovery process, hydro distillation was used. With the transesterification reaction, the obtained oil was converted into biofuel. In a specific proportion, biofuel was combined with reference diesel fuel. Critical oils were studied for their effect on engine efficiency and combustion parameters. A Kirlaskor four-stroke diesel engine was used to test the mixed fuel and comparison diesel fuel. Engine tests were carried out at various loads and at a steady engine rpm. As compared to diesel fuel, the mixture fuel provided 1.63 percent more effective engine power and 1.31 Nm more engine torque. The maximum gas pressure, maximum cumulative heat dissipation, maximum average gas temperature, and maximum net heat emission rates all increased dramatically when the combustion data was analyzed. The findings revealed that the critical oil-based blended fuel enhanced the combustion event in diesel engines.
- 1 May 2022
- Published by International Journal of Automotive Engineering and Technologies in International Journal of Automotive Engineering and Technologies
- Vol. 11 (1) , 9-17
Experimental investigation of essential oils as fuel additives
Essential oils were investigated as fuel additives in this research. Origanum Acutidens is used to make essential oil. In the oil recovery process, hydro distillation was used. With the transesterification reaction, the obtained oil was converted into biofuel. In a specific proportion, biofuel was combined with reference diesel fuel. Critical oils were studied for their effect on engine efficiency and combustion parameters. A Kirlaskor four-stroke diesel engine was used to test the mixed fuel and comparison diesel fuel. Engine tests were carried out at various loads and at a steady engine rpm. As compared to diesel fuel, the mixture fuel provided 1.63 percent more effective engine power and 1.31 Nm more engine torque. The maximum gas pressure, maximum cumulative heat dissipation, maximum average gas temperature, and maximum net heat emission rates all increased dramatically when the combustion data was analyzed. The findings revealed that the critical oil-based blended fuel enhanced the combustion event in diesel engines.
- 1 May 2022
- Published by International Journal of Automotive Engineering and Technologies in International Journal of Automotive Engineering and Technologies
- Vol. 11 (1) , 1-8
Investigation of the pure use of microalg oil in diesel engines
The effects of mixing pure vegetable oils with diesel fuels and using them in diesel engines were explored in this study. Due to its great production, Chorella protactes, a microalgae species, was employed as a vegetable oil. First, pure microalgae oil was combined with 5% (DSYK-5) and 10% (DSYK-10) diesel reference fuel (RDF) by volume for this experiment. The resulting blended fuels and diesel reference fuel were put to the test in a four-cylinder, four-stroke diesel engine at 1500 rpm and various loads. With the use of pure oil, the results showed a 4.64 percent rise in specific fuel consumption (SFC). CO emissions reduced by 9.05 percent on average when DSYK-5 fuel was used, while CO emissions increased when DSYK-10 fuel was used. HC emissions reduced by 4.6 percent on average when blended fuels were used, whereas NOx emissions increased by 3.13 percent on average. CO2 emissions were comparable to RDF fuel when DSYK-5 fuel was used. When comparing RDF fuel to DSYK-10 fuel, fewer CO2 emissions were found. Average gas temperatures, cumulative heat releases, and cylinder pressure values all reduced as the pure oil ratio in the mixture ratio increased.
- 1 May 2022
- Published by International Journal of Automotive Engineering and Technologies in International Journal of Automotive Engineering and Technologies
- Vol. 11 (1) , 1-8
Investigation of the pure use of microalg oil in diesel engines
The effects of mixing pure vegetable oils with diesel fuels and using them in diesel engines were explored in this study. Due to its great production, Chorella protactes, a microalgae species, was employed as a vegetable oil. First, pure microalgae oil was combined with 5% (DSYK-5) and 10% (DSYK-10) diesel reference fuel (RDF) by volume for this experiment. The resulting blended fuels and diesel reference fuel were put to the test in a four-cylinder, four-stroke diesel engine at 1500 rpm and various loads. With the use of pure oil, the results showed a 4.64 percent rise in specific fuel consumption (SFC). CO emissions reduced by 9.05 percent on average when DSYK-5 fuel was used, while CO emissions increased when DSYK-10 fuel was used. HC emissions reduced by 4.6 percent on average when blended fuels were used, whereas NOx emissions increased by 3.13 percent on average. CO2 emissions were comparable to RDF fuel when DSYK-5 fuel was used. When comparing RDF fuel to DSYK-10 fuel, fewer CO2 emissions were found. Average gas temperatures, cumulative heat releases, and cylinder pressure values all reduced as the pure oil ratio in the mixture ratio increased.